検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 20 件中 1件目~20件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

The BCC $$rightarrow$$ FCC hierarchical martensite transformation under dynamic impact in FeMnAlNiTi alloy

Li, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*

Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02

The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in Fe$$_{42}$$Mn$$_{34}$$Al$$_{15}$$Ni$$_{7.5}$$Ti$$_{1.5}$$ alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC $$rightarrow$$ FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.

論文

Chiral Dirac fermion in a collinear antiferromagnet

Zhang, A.*; Deng, K.*; Sheng, J.*; Liu, P.*; Kumar, S.*; 島田 賢也*; Jiang, Z.*; Liu, Z.*; Shen, D.*; Li, J.*; et al.

Chinese Physics Letters, 40(12), p.126101_1 - 126101_8, 2023/12

In a Dirac semimetal, the massless Dirac fermion has zero chirality, leading to surface states connected adiabatically to a topologically trivial surface state as well as vanishing anomalous Hall effect. Recently, itis predicted that in the nonrelativistic limit of certain collinear antiferromagnets, there exists a type of chiral "Dirac-like" fermion, whose dispersion manifests four-fold degenerate crossing points formed by spin-degenerate linear bands, with topologically protected Fermi arcs. Here, by combining with neutron diffraction and first-principles calculations, we suggest a multidomain collinear antiferromagnetic configuration, rendering the existence of the Fermi-arc surface states induced by chiral Dirac-like fermions.

論文

Hybridized propagation of spin waves and surface acoustic waves in a multiferroic-ferromagnetic heterostructure

Chen, J.*; 山本 慧; Zhang, J.*; Ma, J.*; Wang, H.*; Sun, Y.*; Chen, M.*; Ma, J.*; Liu, S.*; Gao, P.*; et al.

Physical Review Applied (Internet), 19(2), p.024046_1 - 024046_9, 2023/02

 被引用回数:1 パーセンタイル:92.2(Physics, Applied)

Coherent coupling in magnon based hybrid system has many potential applications in quantum information processing. Magnons can propagate in magnetically ordered materials without any motion of electrons, offering a unique method to build low-power-consumption devices and information channels free of heat dissipation. In this article, we demonstrate the coherent propagation of hybridized modes between spin waves and Love surface acoustic waves in a multiferroic BiFeO$$_{3}$$ and ferromagnetic La$$_{0.67}$$Sr$$_{0.33}$$MnO$$_{3}$$ based heterostructure. The magneto-elastic coupling enables a giant enhancement of strength of the hybridized mode by a factor of 26 compared to that of the pure spin waves. A short wavelength down to 250 nm is demonstrated for the hybridized mode, which is desirable for nanoscale acousto-magnonic applications. Our combined experimental and theoretical analyses represent an important step towards the coherent control in hybrid magnonics, which may inspire the study of magnon-phonon hybrid systems for coherent information processing and manipulation.

論文

Two-dimensional quantum universality in the spin-1/2 triangular-lattice quantum antiferromagnet Na$$_{2}$$BaCo(PO$$_{4}$$)$$_{2}$$

Sheng, J.*; Wang, L.*; Candini, A.*; Jiang, W.*; Huang, L.*; Xi, B.*; Zhao, J.*; Ge, H.*; Zhao, N.*; Fu, Y.*; et al.

Proceedings of the National Academy of Sciences of the United States of America, 119(51), p.e2211193119_1 - e2211193119_9, 2022/12

Although considerable progress has been made in the theoretical understanding of the low-dimensional frustrated quantum magnets, experimental realizations of a well-established scaling analysis are still scarce. This is particularly true for the two-dimensional antiferromagnetic triangular lattices. Owing to the small exchange strength, the newly discovered compound Na$$_{2}$$BaCo(PO$$_{4}$$)$$_{2}$$ provides a rare opportunity for clarifying the quantum criticality in an ideal triangular lattice with quantum spin S=1/2. In addition to the establishment of the complete phase diagrams, the spin Hamiltonian with a negligible interplane interaction has been determined through the spin wave dispersion in the polarized state, which is consistent with the observation of a two-dimensional quantum critical point with the Bose-Einstein condensation of diluted free bosons.

論文

Assessment of radioactive contamination and effectiveness of remedial measures in urban environments, Report of Working Group 2, Modelling and Data for Radiological Impact Assessments (MODARIA) Programme

Boznar, M. Z.*; Charnock, T. W.*; Chouhan, S. L.*; Grsic, Z.*; Halsall, C.*; Heinrich, G.*; Helebrant, J.*; Hettrich, S.*; Ku$v{c}$a, P.*; Mancini, F.*; et al.

IAEA-TECDOC-2001, 226 Pages, 2022/06

IAEAは、2012年から2015年にかけて、放射線影響評価のためのモデリングとデータに関する(MODARIA)プログラムを組織した。MODARIAプログラムは、環境放射線量評価の分野において、改善されたデータの取得、モデルの試験、モデルの入力・仮定・出力の比較、モデリングの考え方に関する合意形成、アプローチとパラメータ値の調整、改善された方法の開発、情報交換を行うことで能力を高めることを目的としたものである。本書は、第2ワーキンググループ「汚染された都市環境における被ばくと修復措置の効果」の活動について述べたものである。

論文

Urban Working Groups in the IAEA's model testing programmes; Overview from the MODARIA I and MODARIA II programmes

Thiessen, K. M.*; Boznar, M. Z.*; Charnock, T. W.*; Chouhan, S. L.*; Federspiel, L.; Gra$v{s}$i$v{c}$, B.*; Grsic, Z.*; Helebrant, J.*; Hettrich, S.*; Hulka, J.*; et al.

Journal of Radiological Protection, 42(2), p.020502_1 - 020502_8, 2022/06

 被引用回数:4 パーセンタイル:80.29(Environmental Sciences)

The IAEA's model testing programmes (1988-2019) have included a series of Working Groups concerned with modelling radioactive contamination in urban environments. This paper describes the exercises conducted during the MODARIA I (2012-2015) and MODARIA II (2016-2019) programmes. These exercises have included short-range and mid-range atmospheric dispersion exercises based on data from field tests or tracer studies, hypothetical urban dispersion exercises, and an exercise based on data collected after the Fukushima accident. Improvement of model capabilities will lead to improvements in assessing various contamination scenarios (real or hypothetical), and in turn, to improved decision-making and communication with the public following a nuclear or radiological emergency.

論文

Long decay length of magnon-polarons in BiFeO$$_{3}$$/La$$_{0.67}$$Sr$$_{0.33}$$MnO$$_{3}$$ heterostructures

Zhang, J.*; Chen, M.*; Chen, J.*; 山本 慧; Wang, H.*; Hamdi, M.*; Sun, Y.*; Wagner, K.*; He, W.*; Zhang, Y.*; et al.

Nature Communications (Internet), 12, p.7258_1 - 7258_8, 2021/12

 被引用回数:10 パーセンタイル:76.55(Multidisciplinary Sciences)

Magnons can transfer information in metals and insulators without Joule heating, and therefore are promising for low-power computation. The on-chip magnonics however suffers from high losses due to limited magnon decay length. In metallic thin films, it is typically on the tens of micrometre length scale. Here, we demonstrate an ultra-long magnon decay length of up to one millimetre in multiferroic/ferromagnetic BiFeO$$_{3}$$(BFO)/La$$_{0.67}$$Sr$$_{0.33}$$MnO$$_{3}$$ (LSMO) heterostructures at room temperature. This decay length is attributed to a magnon-phonon hybridization and is more than two orders of magnitude longer than that of bare metallic LSMO. The long-distance modes have high group velocities of 2.5 km$$^{-1}$$ as detected by time-resolved Brillouin light scattering. Numerical simulations suggest that magnetoelastic coupling via the BFO/LSMO interface hybridizes phonons in BFO with magnons in LSMO. Our results provide a solution to the long-standing issue on magnon decay lengths in metallic magnets and advance the bourgeoning field of hybrid magnonics.

論文

Assembly study for JT-60SA tokamak

柴沼 清; 新井 貴; 長谷川 浩一; 星 亮; 神谷 宏治; 川島 寿人; 久保 博孝; 正木 圭; 佐伯 寿; 櫻井 真治; et al.

Fusion Engineering and Design, 88(6-8), p.705 - 710, 2013/10

 被引用回数:10 パーセンタイル:61.35(Nuclear Science & Technology)

The JT-60SA project is conducted under the BA satellite tokamak programme by EU and Japan, and the Japanese national programme. The project mission is to contribute to early realization of fusion energy by supporting ITER and by complementing ITER with resolving key physics and engineering issues for DEMO reactors. In this paper, the assembly of major tokamak components such as VV and TFC is mainly described. An assembly frame (with the dedicated cranes), which is located around the tokamak, is adopted to carry out the assembly of major tokamak components in the torus hall independently of the facility cranes for preparations such as pre-assembly in the assembly hall. The assembly frame also provides assembly tools and jigs to support temporarily the components as well as to adjust the components in final positions.

論文

Benchmarking of mechanical test facilities related to ITER CICC steel jackets

Vostner, A.*; Pong, I.*; Bessette, D.*; Devred, A.*; Sgobba, S.*; Jung, A.*; Weiss, K.-P.*; Jewell, M. C.*; Liu, S.*; Yu, W.*; et al.

IEEE Transactions on Applied Superconductivity, 23(3), p.9500705_1 - 9500705_5, 2013/06

 被引用回数:11 パーセンタイル:53.14(Engineering, Electrical & Electronic)

ITERの超伝導コイルシステムで使用されるITER用ケーブルインコンジット導体は、ステンレス管(ジャケット)に300本から1440本の素線で構成されるケーブルを収めた構造である。ジャケットは、円形、又は角形のものが用いられ、低炭素型AISI316LNグレードのステンレス鋼又は高マンガンステンレス鋼JK2LBが使用されている。国内機関の試験装置、ITERから指定されたCERN、カールスルーエ工科大学において、ジャケットの母材及び溶接継手の機械試験を室温及び低温(7K以下)で行った。その結果、測定された特性は、各試験装置間でほぼ一致した。本論文では、試験装置のベンチマーク的な観点で、試験結果をまとめ、比較した結果について述べる。

論文

Test results of ITER conductors in the SULTAN facility

Bruzzone, P.*; Stepanov, B.*; Wesche, R.*; Mitchell, N.*; Devred, A.*; 布谷 嘉彦; Tronza, V.*; Kim, K.*; Boutboul, T.*; Martovetsky, N.*; et al.

Proceedings of 24th IAEA Fusion Energy Conference (FEC 2012) (CD-ROM), 8 Pages, 2013/03

ITER超伝導導体の実規模サンプルの性能試験をスイスのSULTAN試験装置を用いて2007年より行ってきている。試験は導体開発における各フェーズ、すなわち、設計段階,製作プロセス決定段階,大量生産確立段階、及び大量生産中において性能試験を実施することがITER機構と各極が結んだ導体調達の取り決めにおいて定められている。NbTiを用いた導体では、導体断面内での最高磁場部で代表される磁場で整理すると、導体の超伝導性能はNbTi素線の性能から予想される性能と等しいことがわかった。一方、Nb$$_{3}$$Snを用いた導体では、素線フィラメントの損傷に起因する不可逆な性能劣化が、サンプル電流の上げ下げによるサイクリック試験において広く認められた。導体の常伝導転移の急峻さを示すn値に着目すると、不可逆な性能低下に伴いNbTiと異なりNb$$_{3}$$Snは素線のn値から大きく低下していることもわかった。SULTAN試験装置における性能評価の結果と特徴をまとめる。

論文

Intrabeam scattering at low temperature range

Yu, P.*; He, Z.*; Wei, J.*; Sessler, A. M.*; 岡本 宏巳*; 百合 庸介

Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.1943 - 1945, 2010/05

In the process of beam cooling, the main heating source is intra-beam scattering (IBS), in which Coulomb collisions among particles lead to a growth of the beam's 6D phase-space volume. The results of molecular dynamics simulations have shown an increase of heating rate as the temperature increases from absolute zero, then a peak in the heating rate, and subsequent decrease with increasing temperature. On the other hand, in the traditional IBS theory, heating rate increases monotonically as the temperature becomes lower and lower. In this paper, we attempt to extend the traditional IBS theory valid at high temperatures to relatively low temperature range, by including some many-body effects in the traditional IBS theory. In particular, we take into account the static and dynamic effect of the self-electromagnetic field of the beam. We shall show how these effects modify the traditional theory, and present the evaluation of IBS heating rate of an ion beam in the low temperature range.

論文

Status and challenges in beam crystallization

Wei, J.*; Yu, P.*; 岡本 宏巳*; 百合 庸介; Li, X.-P.*; Sessler, A. M.*

Proceedings of Workshop on Beam Cooling and Related Topics (COOL '09) (Internet), p.86 - 90, 2010/00

During the past several decades, beam crystallization has been studied both theoretically and experimentally. Theoretical investigations have been numerical, mainly using computer modeling based on the method of molecular dynamics, and analytical, based on phonon theory. Experimental investigations involve both ion storage rings and ion traps using both electron and laser beam cooling. Topics of interests include crystal stability in various accelerator lattices and under different beam conditions, crystalline beam formation in shear-free ring lattices with both magnets and electrodes, experimental simulation of alternating-gradient conditions with an ion trap, etc. In this paper, we first review theoretical approaches and major conclusions pertaining to beam crystallization. Then, we analyze conditions and methods of the various major experiments. Finally, we discuss, both theoretically and experimentally, some improvements, open questions, and challenges in beam crystallization.

報告書

Fundamental study on flow characteristics of disrupted core pool at a low energy level (Joint research)

守田 幸路*; Ryu, P.*; 松元 達也*; 福田 研二*; 飛田 吉春; 山野 秀将; 佐藤 一憲

JAEA-Research 2009-018, 52 Pages, 2009/09

JAEA-Research-2009-018.pdf:46.46MB

液体金属高速炉の低エネルギー損傷炉心における炉心物質の流動性をモデル化するため、固体粒子が支配的な多相流の運動挙動について研究を行った。ダム堰崩壊実験及び気泡可視化実験の2つのシリーズの実験を行うとともに、実験の数値シミュレーションにより高速炉安全解析コードSIMMER-IIIの流体力学モデルについて検証した。実験解析から、SIMMER-IIIは粒子ジャミングモデルのモデルパラメータの調整によって固体粒子間の相互作用の多相流挙動への影響をある程度模擬できることがわかった。広範な流れ条件において固体粒子間の相互作用を適切に表すためには、より一般化されたモデルを用いてSIMMER-IIIを改良する必要がある。

論文

Validation of on- and off-axis neutral beam current drive against experiment in DIII-D

Park, J. M.*; 村上 和功*; Petty, C. C.*; Heidbrink, W. W.*; Osborne, T. H.*; Holcomb, C. T.*; Van Zeeland, M. A.*; Prater, R.*; Luce, T. C.*; Wade, M. R.*; et al.

Physics of Plasmas, 16(9), p.092508_1 - 092508_10, 2009/09

 被引用回数:23 パーセンタイル:64.7(Physics, Fluids & Plasmas)

DIII-Dにおいてプラズマを垂直方向に変位させることで、プラズマ周辺部(off-axis)での中性粒子ビーム電流駆動(NBCD)を実証した。モーショナルシュタルク効果計測により測定した磁力線ピッチ角の時間変化からポロイダル磁束の時間変化を評価し、小半径の半分程度にピークを持ち空間的に広がったoff-axis NBCD分布を示す結果を得た。多くの場合、測定したoff-axis NBCD分布は有限軌道効果を考慮した軌道追跡モンテカルロコードによる高速イオンの減速計算によるものと一致する。中性化した高速イオンが発するD$$alpha$$光の2次元イメージング計測によるとビームイオン密度分布は凹状になっており古典的な減速の描像と一致する。NB駆動電流の大きさはビームと磁力線のなす角と関係しており、両者のなす角が小さくなるように選ぶことでoff-axis NBCDの効率は中心部(on-axis)NBCDと同程度によくすることができる。測定したoff-axis NBCDは入射パワーとともに増加するが、高パワーにおいて測定と計算が合うためには計算に適度な高速イオン拡散を入れる必要がある。

論文

Off-axis neutral beam current drive for advanced scenario development in DIII-D

村上 和功*; Park, J. M.*; Petty, C. C.*; Luce, T. C.*; Heidbrink, W. W.*; Osborne, T. H.*; Prater, R.*; Wade, M. R.*; Anderson, P. M.*; Austin, M. E.*; et al.

Nuclear Fusion, 49(6), p.065031_1 - 065031_8, 2009/06

 被引用回数:43 パーセンタイル:82.92(Physics, Fluids & Plasmas)

DIII-Dでは、小半径の50%という周辺部で電流駆動できるようにするために、2つの中性粒子ビーム(NB)の垂直方向角度を可変とする改造を計画している。計算によると、NBを下側に向けた場合には、プラズマ電流とトロイダル磁場が同方向の場合に電流駆動効率が大きくなる。この効果は大きく、ITERでの計算では現状のトロイダル磁場の方向を反転させると周辺部NB駆動電流は20%以上増加する。この計算結果を検証するためにDIII-Dでプラズマを上下方向に寄せることでNBに対する磁力線の角度を変化させ、そのときの周辺部NB駆動電流を調べた。MSE計測によるとNB駆動電流は計算通り40$$sim$$45%変化した。この結果から、DIII-DのNBに垂直方向角度を可変とする改造を行うことで、ITERや将来のトカマクのためのシナリオ開発を強力に推進できるだけでなく、輸送・高エネルギー粒子・加熱電流駆動の物理を自在に調べられるようになることが期待される。

論文

New method to measure the rise time of a fast pulse slicer for laser ion acceleration research

森 道昭; 余語 覚文; 桐山 博光; 西内 満美子; 小倉 浩一; 織茂 聡; Ma, J.*; 匂坂 明人; 金沢 修平; 近藤 修司; et al.

IEEE Transactions on Plasma Science, 36(4), p.1872 - 1877, 2008/08

 被引用回数:7 パーセンタイル:28.59(Physics, Fluids & Plasmas)

本グループでは、京都大学・電力中央研究所・GIST等と共同でレーザー駆動プロトンビームの利用に向け、レーザー・ターゲット双方からエネルギー/変換効率/Emittanceの最適化に関する研究を進めている。本論文はその研究の過程において開発したレーザー駆動高エネルギープロトンビーム発生におけるチャープパルスを用いた高速パルススライサー装置の新たな性能評価法と、その後に行ったイオン加速実験に関する結果をまとめたものである。この研究開発によって、新手法の有意性を明らかにするとともに、プレパルスの抑制により最大2.3MeVのプロトンビームの発生を実証しプレパルスがプロトンビームの高エネルギー化に重要な役割を果たすことを明らかにした。

論文

The H-Invitational Database (H-InvDB); A Comprehensive annotation resource for human genes and transcripts

山崎 千里*; 村上 勝彦*; 藤井 康之*; 佐藤 慶治*; 原田 えりみ*; 武田 淳一*; 谷家 貴之*; 坂手 龍一*; 喜久川 真吾*; 嶋田 誠*; et al.

Nucleic Acids Research, 36(Database), p.D793 - D799, 2008/01

 被引用回数:51 パーセンタイル:71.37(Biochemistry & Molecular Biology)

ヒトゲノム解析のために、転写産物データベースを構築した。34057個のタンパク質コード領域と、642個のタンパク質をコードしていないRNAを見いだすことができた。

論文

Incident energy and polarization-dependent resonant inelastic X-ray scattering study of La$$_2$$CuO$$_4$$

Lu, L.*; Hancock, J. N.*; Chabot-Couture, G.*; 石井 賢司; Vajk, O. P.*; Yu, G.*; 水木 純一郎; Casa, D.*; Gog, T.*; Greven, M.*

Physical Review B, 74(22), p.224509_1 - 224509_9, 2006/12

 被引用回数:34 パーセンタイル:77.87(Materials Science, Multidisciplinary)

モット絶縁体であるLa$$_2$$CuO$$_4$$について、1-7eVのエネルギー損失領域に渡って測定した銅のK吸収端での共鳴非弾性X線散乱(RIXS)の研究について報告する。高温超伝導体HgBa$$_2$$CuO$$_{4+delta}$$で最初に見つかったように、入射エネルギーに対して散乱断面積が細かく変わることを利用して、RIXSスペクトルには分散の小さい幾つかの電子正孔対励起があることを示すことができた。励起の詳細な構造がCuO$$_2$$面に垂直な偏光と平行な偏光で類似していることから、励起には$$1s$$正孔が中心的な役割を果たしていることがわかる。一方で、2eV付近に現れる励起強度については偏光依存性があることから、異なる電荷移動プロセスと考えられる2つの励起が存在することがわかった。この偏光依存性は、RIXSのプロセスにおいて$$4p$$電子も何らかの役割を果たしていることを示唆している。

論文

Properties of thin boron coatings formed during deuterated-boronization in JT-60

柳生 純一; 荻原 徳男; 西堂 雅博; 岡部 友和; 平塚 一; 三代 康彦; 楢本 洋; 山本 春也; 竹下 英文; 青木 康; et al.

Journal of Nuclear Materials, 241-243, p.579 - 584, 1997/00

 被引用回数:15 パーセンタイル:74.12(Materials Science, Multidisciplinary)

デカボランを用いたボロナイゼーションでは、第一壁上に作製されたボロン膜中に10-12%の軽水素が含まれる。重水素放電を実施した際、この軽水素がプラズマ燃料を希釈してしまうため、ボロナイゼーション後に約100ショットの調整放電が必要であった。軽水素濃度を減らす目的で、重水素化ボロナイゼーションを実施した。作製したボロン膜を分析したところ、ボロン膜中に軽水素は、2-4%に減少していることが判った。重水素放電においても、ボロナイゼーション直後からプラズマ中の軽水素濃度は少なく、調整放電も不要であった。更に、ボロン膜を内壁全面に渡って均一に作製するために、真空容器内にデカボランガス供給口を12箇所設けた。その結果、トロイダル方向に105nm-255nm厚さのボロン膜が作製された。

論文

JT-60U用その場ボロン化処理装置により作製したボロン膜中の水素分析

西堂 雅博; 柳生 純一; 山本 春也; Goppelt-Langer, P.*; 青木 康; 竹下 英文; 楢本 洋

第4回TIARA研究発表会要旨集, 0, p.44 - 45, 1995/00

JT-60Uで実施した第4回その場ボロン化処理(ボロン・コーティング)で作製したボロン膜中の水素濃度分析を、高崎研・高機能材料第2研究室と共同で行った。分析法として、$$^{15}$$Nを用いた共鳴核反応法及び高エネルギー$$^{16}$$O及び$$^{58}$$Niを使用した反跳粒子検出法を採用した。前者の場合には、膜厚が厚いと深さ分布を得るためには時間がかかること、また、軽水素と重水素の分離測定は、困難であることが判明した。後者の場合には、膜厚が厚く(~1$$mu$$m)ても、深さ分布を得るのに短時間で良いこと、また、軽水素と重水素の分離測定が可能であること、さらには、30MeV$$^{58}$$Niを使用した場合には、母材元素であるボロンの反跳スペクトルを得ることができるため、水素の定量がボロン濃度を内部標準として使用できる利点のあることが判明した。

20 件中 1件目~20件目を表示
  • 1