Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamaguchi, Yoshihito; Hasegawa, Kunio; Li, Y.; Lacroix, V.*
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 4 Pages, 2022/07
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Okajima, Satoshi
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 9 Pages, 2022/07
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of austenitic stainless steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. Moreover, a series of finite element analyzes to confirm the applicability of the evaluation method in 2.25Cr-1Mo steel and up to 650 C were conducted.
Lacroix, V.*; Hasegawa, Kunio; Li, Y.; Yamaguchi, Yoshihito
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 7 Pages, 2022/07
Katsuyama, Jinya; Yamaguchi, Yoshihito; Nemoto, Yoshiyuki; Furuta, Takuya; Kaji, Yoshiyuki
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 9 Pages, 2022/07
Yamaguchi, Yoshihito; Nishida, Akemi; Li, Y.
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 7 Pages, 2022/07
The wall-thinning is one of the most important age-related degradation phenomena in nuclear piping systems. Furthermore, in recent years, several nuclear power plants in Japan have experienced severe earthquakes. Therefore, failure probability analysis and fragility evaluation of piping systems, taking both wall-thinning and seismic response stresses into consideration, have become increasingly important in seismic probabilistic risk assessment. In Japan Atomic Energy Agency, in order to evaluate the failure probability of aged piping system with wall-thinning, a probabilistic analysis code PASCAL-EC was developed. In this study, to evaluate the seismic fragility of a wall-thinned pipe, a model of seismic response stress considering the wall-thinning effect, a failure evaluation method for wall-thinned pipes, and functions related to uncertainties treatment for important influence parameters have been introduced to PASCAL-EC. In this paper, the improved PASCAL-EC is outlined and preliminary results of the seismic fragility evaluation performed using this code are provided.
Yamaguchi, Yoshihito; Mano, Akihiro; Li, Y.
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 10 Pages, 2022/07
The steam generator (SG) tube is one of the important components in pressurized water reactors. Flaws such as wall-thinning or stress corrosion cracking have been reported in SG tubes. The burst pressure where both the internal and external pressures from the primary and secondary coolant systems are considered must be predicted to assess the structural integrity of SG tubes. Burst tests were performed by various organizations. On the basis of the test results, failure estimation methods were proposed. In this study, previous burst test data and existing failure estimation methods for SG tubes with wall-thinning or crack were investigated. As a result, the coefficient of the existing estimation method for SG tube with uniform wall-thinning was updated. In addition, failure estimation methods that are suitable for SG tubes with crack or local wall-thinning were proposed by considering the effects of the flaw shape and size on the burst pressure. The applicability of the failure estimation methods was confirmed by comparing the predicted results with the burst test data in actual SG tubes.
Zarazovski, M.*; Pistra, V.*; Lauerova, D.*; Obermeier, F.*; Mora, D.*; Dubyk, Y.*; Bolinder, T.*; Cueto-Felgueroso, C.*; Szavai, S.*; Dudra, J.*; et al.
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 11 Pages, 2022/07
Lacroix, V.*; Dulieu, P.*; Hasegawa, Kunio; Mares, V.*
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 7 Pages, 2022/07
In the ASME Code Section XI, a simplified approach is proposed: a nonplanar flaw is resolved into two planar flaws by projection of the flaw area into planes normal to the maximum principal stress. However, simplified resolution of nonplanar flaws is not conservative for all types of loading and flaw inclinations. Consequently, an improvement of the resolutions of nonplanar flaws must be provided in the ASME Code Section XI. This paper carries out an exhaustive assessment of the conservatism of the ASME approach and then proposes an alternative approach to deal with nonplanar flaws allowing to overcome the non-suitability of current ASME Code.