Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
; Kawai, Masashi; ; ; ; Okubo, Toshiyuki;
PNC TN9410 94-094, 69 Pages, 1994/03
As the final step of development of a control rod guide system (rod guider), it has been conducted to display information concerning the rod guider operation and the current plant conditions on a CRT in Japanese, to tell information for operators and to predict more accurately the stroke of each control rod to be driven at a reactor power adjustment operation since 1992, in oder to improve a function of man-machine interface of the rod guider. The development of the rod guider was completed with the following good results as expected. (1)The function of man-machine interface of the rod guider was improved to display information on a CRT in Japanese. (2)The voice guidance contributed to obtain higher operational reliability and to lower the load on the operators. (3)The rod guider provided the same function as operation manuals of Joyo because all operation procedures in the manuals were inputted into the rod guider. And the timely operation guides provided by the rod guider evabled non-skilled operators to control the reactor in the same manner as the experienced ones. (4)The difference of the predicted and actual rod stroke to be driven at the reactor power adjustment operation was reduced to less than 0.2mm by both the existing inverse multiplication method and the experiences gained in the past five reactor power adjustment operations.
; ; ;
PNC TN1410 91-097, 17 Pages, 1991/12
This report describes the results of project JD-12 including JD-9. The objective of this project is to develop a remote surveillance system with a trigger devices which consist of ray monitor and electronic sealing switch. The concept of the system is going to be applied to an automatich storage of new MOX plant which is fully automated.