Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ezato, Koichiro; Suzuki, Satoshi; Sato, Kazuyoshi; Akiba, Masato
Journal of Nuclear Materials, 329-333(1), p.820 - 824, 2004/08
Times Cited Count：6 Percentile：40.51(Materials Science, Multidisciplinary)This paper presents thermal fatigue experiments of a cooling tube with a helical triangular fin on its inner cooled surface, namely a 
. The screw thread is directly shaped in a CuCrZr heat sink bar as a cooling channel. Slits with the width of 1.5 mm are machined at the heated side of the heat sink. The thermal fatigue experiments are carried out at 20 and 30 
by using an electron beam irradiation facility in JAERI. Water leakages from fatigue cracks, which locate at the slit of the heat sink, occurred at around 4500th and 1400th cycles at 20 and 30 , respectively. These results show good agreement with lifetime predictions using Manson-Coffin's law based on finite element analyses. Fractographic observations reveal that the fatigue cracks start from the outer heated surface at the slit region of the cooling channel and propagate toward its inner surface.
Takeda, Tetsuaki; Ohashi, Hirofumi; Inagaki, Yoshiyuki
Nihon Kikai Gakkai 2003-Nendo Nenji Taikai Koen Rombunshu, Vol.3, p.17 - 18, 2003/08
A technology development of a hydrogen production system by a nuclear heat are being performed as a heat application system of a high-temperature gas cooled reactor in the Japan Atomic Energy Research Institute. The objective of this study is to clarify heat transfer characteristics of the steam reformer in the HTTR hydrogen production system. An experiment has been performed using a double coaxial vertical tube to obtain the heat transfer characteristics and to evaluate the effectiveness of heat transfer enhancement. The amount of produced hydrogen increases with increasing not only reaction rate of catalysis but also the heat transfer coefficient. It is necessary to take into account of heat transfer from both surfaces of the double coaxial tube in order to obtain the amount of transferred heat from the heated tube to the coolant gas.
Kaminaga, Fumito*
JAERI-Tech 2002-012, 68 Pages, 2002/03
JAERI-Tech-2002-012.pdf:2.45MB
no abstracts in English
Kubo, Shinji; Akino, Norio; Tanaka, Amane*; Nagashima, Akira*
Nihon Kikai Gakkai Rombunshu, B, 64(625), p.3013 - 3020, 1998/09
no abstracts in English
Hada, Kazuhiko
JAERI-Research 96-054, 28 Pages, 1996/10
JAERI-Research-96-054.pdf:1.01MB
no abstracts in English
