Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Novello, L.*; Baulaigue, O.*; Coletti, A.*; Dumas, N.*; Ferro, A.*; Gaio, E.*; Lampasi, A.*; Maistrello, A.*; 松川 誠; 島田 勝弘; et al.
Fusion Engineering and Design, 98-99, p.1122 - 1126, 2015/10
被引用回数:16 パーセンタイル:77.59(Nuclear Science & Technology)JT-60SA, the superconducting tokamak under construction in Japan, will be equipped with a mix of new and reused Power Supplies (PS). Most of the new PS are procured by European Voluntary Contributors under the framework of Broader Approach agreement between F4E and JAEA. For the toroidal circuit, the 6 pulses ac/dc converter will be procured by CEA. It is rated 25.7 kA and 80 V dc, and will work in steady state condition. For the poloidal circuits the procurement of ten ac/dc converters, rated 20 kA and about 1 kV is shared between CEA and ENEA. They are 24 pulses four quadrant converters, with back to back thyristor bridges. Plasma initiation requires a fast variation of current in the Central Solenoids, obtained with the insertion of a settable resistor in series to the coils. This is achieved with the operation of four Switching Network Units procured by ENEA, producing up to 5 kV at the nominal 20 kA. The protection of superconducting magnets, both toroidal and poloidal, is assured by 13 Quench Protection Circuits procured by Consorzio RFX, rated 20 kA and 3.8 kV for poloidal QPCs and 25.7 kA and 2.8 kV for toroidal ones. The present status of the aforementioned PS is described in the paper: their detailed design has been completed and some systems have been already manufactured and tested.