Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Zn
Mo
O
Bao, S.*; Liao, J.*; Huang, Z.*; Shangguan, Y.*; Ma, Z.*; Zhang, B.*; Cheng, S.*; Xu, H.*; Song, Z.*; Dong, S.*; et al.
Physical Review Letters, 136(9), p.096502_1 - 096502_8, 2026/03
Lattice vibrations can carry angular momentum and magnetic moments under broken inversion or time-reversal symmetry, forming so-called chiral phonons. While such excitations have been explored in nonmagnetic systems via optical probes, their direct detection in magnetic materials and coupling to spin excitations remain largely unexplored. Here, using neutron spectroscopy, sensitive to both nuclear and magnetic scattering, we reveal the magnetic signature of chiral phonons in ferrimagnetic FeZnMoO with Curie temperature 
K. Below 
, we observe enhanced magnetic scattering of phonons at small momenta, arising from strong magnon-phonon coupling. In addition, out-of-plane intensity modulation, phonon mode splitting, and field-induced Zeeman shifts are observed, all closely associated with the ferrimagnetic order. These features vanish above , where phonon spectra are dominated by nuclear scattering. These observations demonstrate the existence of chiral phonons carrying substantial magnetic moments that directly contribute to magnetic scattering, and establish neutron spectroscopy as a powerful, momentum-resolved probe of their magnetic character.
Qin, T. Y.*; Hu, F. F.*; 徐 平光; Zhang, R.*; Su, Y. H.; Ao, N.*; Li, Z. W.*; 篠原 武尚; 菖蒲 敬久; Wu, S. C.*
International Journal of Fatigue, 202, p.109233_1 - 109233_16, 2026/01
被引用回数：2 パーセンタイル：0.00(Engineering, Mechanical)The surface induction-hardened S38C medium carbon steel shows a good balance of strength and toughness, but complicates the evaluation of fatigue resistance, mainly because of gradient residual stress (RS) and grains. An integrated fatigue resistance assessment (AIFA) framework was proposed to consider the residual stress relief under stochastic loads. To this end, quasi-in situ neutron diffraction and Bragg-edge imaging were combined to probe the evolution of residual stress during crack propagation. Firstly, a rigid-flexible coupled vehicle dynamics model was adopted to obtain the time-domain variable amplitude loading spectrum. Then, Fortran subroutines were developed to assign these data into full-scale S38C axle model, and the remaining life was predicted using the damage tolerance approach. The results demonstrate that crack propagation would accelerate when residual stress is considered in the case of the crack depth exceeding 3.0 mm. It is, for the first time, found that 15 mm- and 5 mm-thickness fan-shaped specimens can retain the axial and hoop residual strain in terms of diffraction angle variation, respectively, for full-scale structural S38C steel axles. In the absence of RS, the remaining life of the axle decreases sharply from 624,800 to 51,300 km as the crack depth increases from 3.0 to 16 mm. Compared with the standard method under constant amplitude loading without residual stress relief, the present AIFA method provides the more accurate but conservative fatigue life prediction.
Hu, F.-F.*; Qin, T.-Y.*; Ao, N.*; 徐 平光; Su, Y. H.; Parker, J. D.*; 篠原 武尚; 菖蒲 敬久; Kang, G.-Z.*; Ren, M.-M.; et al.
Journal of Traffic and Transportation Engineering, 25(2), p.75 - 93, 2025/04
To accurately predict the remaining lifetime of surface-strengthened railway axles, a damage tolerance method considering three-dimensional (3D) residual stresses was proposed. By taking the induction-hardened carbon steel S38C axle as an example, two-dimensional (2D) distribution characterization of residual strain and 3D residual stress measurement were performed through comprehensive application of the neutron Bragg-edge transmission imaging and angle-dispersive neutron diffraction experiments. A numerical method was employed to implant the 3D residual stress into the axle model, and the remaining lifetime of the full-scale axle was studied by coupling the measured load spectrum, press-fit loads, and residual stresses. Experimental results shows that, both axial and hoop directions present a compressive residual strain gradient layer of about 3 mm, with a maximum compressive residual strain of up to -4500 
in the surface layer, yet a maximum tensile strain of up to 1000 in the core. The maximum axial and hoop compressive stresses of the axle are about -500 MPa and -303 MPa respectively, while radial stresses overall fluctuate in the zero mean stress range. At depths beyond 4.5 mm from the surface layer, all three components are tensile stresses. The axle surface layer is subjected to compressive residual stresses, and crack propagation does not occur if the crack depth is less than 4.5 mm. Nevertheless, cracks propagate accelerates when the crack depth is greater than 4.5 mm. Different crack propagation depth thresholds lead to a larger calculated remaining lifetime for the residual stress-free condition than for the case where 3D residual stresses are taken into account. However, the axle remaining service mileage of the axle of 227000 Km under the most conservative conditions exceeds 3.5 non-destructive inspection (NDI) cycles, with a large safety margin. The experimental results can provide a scientific reference for the development and optimization of NDI cycles for surface-strengthened railway axles.
Naeem, M.*; Ma, Y.*; Tian, J.*; Kong, H.*; Romero-Resendiz, L.*; Fan, Z.*; Jiang, F.*; Gong, W.; Harjo, S.; Wu, Z.*; et al.
Materials Science & Engineering A, 924, p.147819_1 - 147819_10, 2025/02
被引用回数：4 パーセンタイル：87.65(Nanoscience & Nanotechnology)Face-centered cubic (fcc) medium-/high-entropy alloys (M/HEAs) typically enhance strength and ductility at cryogenic temperatures via stacking faults, twinning, or martensitic transformation. However, in-situ neutron diffraction on VCoNi MEA at 15 K reveals that strain hardening is driven solely by rapid dislocation accumulation, without these mechanisms. This results in increased yield strength, strain hardening, and fracture strain. The behavior, explained by the Orowan equation, challenges conventional views on cryogenic strengthening in fcc M/HEAs and highlights the role of dislocation-mediated plasticity at low temperatures.
Ying, H.*; Yang, X.*; He, H.*; Yan, A.*; An, K.*; Ke, Y.*; Wu, Z.*; Tang, S.*; Zhang, Z.*; Dong, H.*; et al.
Scripta Materialia, 250, p.116181_1 - 116181_7, 2024/09
被引用回数：11 パーセンタイル：79.58(Nanoscience & Nanotechnology)Nanoscale chemical fluctuations and their effect on the deformation behavior of CrFeCoNi-based high-entropy alloys (HEAs) were investigated using small-angle scattering and in situ neutron diffraction measurements. Small-angle scattering results demonstrated the presence of nano (
10 nm) chemical fluctuations in the as-prepared CrFeCoNiPd HEAs, which was attributed to the negative mixing of enthalpy and the significant atomic radius difference between Pd and the constituent elements in the CrFeCoNi-based alloys. Subsequent tensile tests demonstrated that the yield and tensile strengths of the as-prepared CrFeCoNiPd HEA surpass those of the as-prepared CrMnFeCoNi HEA. Neutron diffraction data analysis revealed an anomalous response of dislocation evolution with the strain.
Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.
Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05
被引用回数：10 パーセンタイル：94.07(Nuclear Science & Technology)In the Best-Estimate Plus Uncertainty (BEPU) framework, the use of best-estimate code requires to go through a Verification, Validation and Uncertainty Quantification process (VVUQ). The relevance of the experimental data in relation to the physical phenomena of interest in the VVUQ process is crucial. Adequacy analysis of selected experimental databases addresses this problem. The outcomes of the analysis can be used to select a subset of relevant experimental data, to encourage designing new experiments or to drop some experiments from a database because of their substantial lack of adequacy. The development of a specific transparent and reproducible approach to analyze the relevance of experimental data for VVUQ still remains open and is the topic of this contribution. In this paper, the concept of adequacy initially introduced in the OECD/NEA SAPIUM (Systematic APproach for model Input Uncertainty quantification Methodology) activity is formalized. It is defined through two key properties, called representativeness and completeness, that allows considering the multifactorial dimension of the adequacy problem. A new systematic approach is then proposed to analyze the adequacy of a set of experimental databases. It relies on the introduction of two sets of criteria to characterize representativeness and completeness and on the use of multi-criteria decision analysis method to perform the analysis. Finally, the approach is applied in the framework of the new OECD/NEA ATRIUM activity which includes a set of practical IUQ exercises in thermal-hydraulics to test the SAPIUM guideline in determining input uncertainties and forward propagating them on an application case. It allows evaluating the adequacy of eight experimental databases coming from the Super Moby-dick, Sozzi-Sutherland and Marviken experiments and identifying the most adequate ones.
neutron diffractionZhou, Y.*; Song, W.*; Zhang, F.*; Wu, Y.*; Lei, Z.*; Jiao, M.*; Zhang, X.*; Dong, J.*; Zhang, Y.*; Yang, M.*; et al.
Journal of Alloys and Compounds, 971, p.172635_1 - 172635_7, 2024/01
被引用回数：4 パーセンタイル：23.57(Chemistry, Physical)The grain orientation-dependent lattice strain evolution of a (TiZrHfNb)
refractory high-entropy alloy (HEA) during tensile loading has been investigated using neutron diffraction. The equivalent strain-hardening rate of each of the primary 
-oriented grain families was found to be relatively low, manifesting the macroscopically weak work-hardening ability of such a body-centered cubic (BCC)-structured HEA. This finding is indicative of a dislocation planar slip mode that is confined in a few single-slip planes and leads to in-plane softening by high pile-up stresses.
SnSe
Ren, Q.*; Gupta, M. K.*; Jin, M.*; Ding, J.*; Wu, J.*; Chen, Z.*; Lin, S.*; Fabelo, O.*; Rodriguez-Velamazan, J. A.*; 古府 麻衣子; et al.
Nature Materials, 22(8), p.999 - 1006, 2023/08
被引用回数：113 パーセンタイル：99.19(Chemistry, Physical)Ultralow thermal conductivity and fast ionic diffusion endow superionic materials with excellent performance both as thermoelectric converters and as solid-state electrolytes. Yet the correlation and interdependence between these two features remain unclear owing to a limited understanding of their complex atomic dynamics. Here we investigate ionic diffusion and lattice dynamics in argyrodite AgSnSe using synchrotron X-ray and neutron scattering techniques along with machine-learned molecular dynamics. We identify a critical interplay of the vibrational dynamics of mobile Ag and a host framework that controls the overdamping of low-energy Ag-dominated phonons into a quasi-elastic response, enabling superionicity. Concomitantly, the persistence of long-wavelength transverse acoustic phonons across the superionic transition challenges a proposed 'liquid-like thermal conduction' picture. Rather, a striking thermal broadening of low-energy phonons, starting even below 50 K, reveals extreme phonon anharmonicity and weak bonding as underlying features of the potential energy surface responsible for the ultralow thermal conductivity (
0.5 Wm
K) and fast diffusion. Our results provide fundamental insights into the complex atomic dynamics in superionic materials for energy conversion and storage.
; Bandgap narrowing, metallization, and remarkable enhancement of photoelectric activityFang, Y.*; Kong, L.*; Wang, R.*; Zhang, Z.*; Li, Z.*; Wu, Y.*; Bu, K.*; Liu, X.*; Yan, S.*; 服部 高典; et al.
Materials Today Physics (Internet), 34, p.101083_1 - 101083_7, 2023/05
被引用回数：10 パーセンタイル：68.26(Materials Science, Multidisciplinary)層状ファンデルワールスハライドは、外部圧力に対して特に敏感であるため、目的とする性質を持つ構造にチューンすることが可能となる。一方で、圧力に非常に敏感であるという特性は、同時に目的とする機能の実現に有害な相転移や格子歪みを引き起こす可能性があるためその操作は依然として困難である。この研究では、層状RhI結晶が持つ極めて弱い層間結合と高い機能可変性を観察した。5GPaという適度な圧力をかけると圧力誘起相転移が起こり、積層構造に変化が現れた。驚くべきことに、この相転移は、圧力に対してほぼ直線的なバンドギャップ減少という傾向に影響を与えなかった。また、より高い圧力では、1.3eVの赤方偏移というかなり大きな調整幅を伴う金属相が観測された。さらに、RhIのキャリア濃度は30GPaで4桁増加し、光電流は7.8GPaで5桁増加することが確認された。これらの結果は、ファンデルワールスハライドの層状構造という特異な特徴を生かした探索、調整、理解のための新たな機会を創出し、原子レベルの薄さを持つマテリアルバイデザインに基づく将来のデバイスとして有望である。
Ao, N.*; Zhang, H.*; Xu, H. H.*; Wu, S. C.*; Liu, D.*; 徐 平光; Su, Y. H.; Kang, Q. H.*; Kang, G. Z.*
Engineering Fracture Mechanics, 281, p.109166_1 - 109166_14, 2023/03
被引用回数：17 パーセンタイル：79.93(Mechanics)Considering the complex service environments that high-speed railway axles are subjected to, the fatigue crack growth (FCG) behavior of a structurally gradient axle steel with different pre-crack depths both in air and corrosive medium was investigated at a frequency of 5 Hz. The results indicated that in the high 
region, FCG rate was dramatically accelerated by corrosion, but the gap narrows as decreased. The accelerated corrosion FCG rate was a comprehensive result of the acceleration effect of the anodic dissolution, hydrogen-enhanced localized plasticity and the retardation effect of corrosion-induced crack-tip blunting. Despite the fact that the corrosion resistance gradually decreased as the pre-crack depth increased, the FCG rate in the corrosive medium gradually decreased. This was because fatigue loading played a more important role than corrosion in accelerating the corrosion FCG rate.
Zhang, J.*; Kuang, L.*; Mou, Z.*; 近藤 俊明*; 小嵐 淳; 安藤 麻里子; Li, Y.*; Tang, X.*; Wang, Y.-P.*; Pe
uelas, J.*; et al.
Plant and Soil, 481(1-2), p.349 - 365, 2022/12
被引用回数：15 パーセンタイル：74.20(Agronomy)Soil warming effects on soil organic carbon (SOC) decomposition and stabilization are highly variable, and the underlying mechanisms are poorly understood. In this study, concentration, stability (dissolved, particle and mineral-associated SOC), and source (plant-derived and microbial-derived) of SOC, soil microbial community composition, and enzyme activities were studied in a 10-year soil warming field experiment in an East Asian monsoon forest. The results showed that 10-year soil warming significantly enhanced SOC in the top 0-10 cm soil. The increased SOC induced by warming was mainly derived from plants with lignin markers, accompanied by a decrease in microbial-derived SOC. This highlights an urgent need for a better understanding of how the contrasting effects of plant- and microbial-derived C mediate the response of the SOC pool to warming across different biomes.
吉田 周平*; Fu, R.*; Gong, W.; 池内 琢人*; Bai, Y.*; Feng, Z.*; Wu, G.*; 柴田 曉伸*; Hansen, N.*; Huang, X.*; et al.
IOP Conference Series; Materials Science and Engineering, 1249, p.012027_1 - 012027_6, 2022/08
被引用回数：5 パーセンタイル：94.24(Metallurgy & Metallurgical Engineering)This study revealed characteristics of the deformation behavior in high/medium entropy alloys (HEAs/MEAs) with face-centered cubic (FCC) structure. A Co
Ni
alloy and a Co
CrNi MEA having low and high friction stresses (fundamental resistance to dislocation glide in solid solutions), respectively, but similar in other properties, including their stacking fault energy and grain sizes, were compared. The MEA exhibited a higher yield strength and work-hardening ability than those in the CoNi alloy at room temperature. Deformation microstructures of the CoNi alloy were composed of coarse dislocation cells (DCs) in most grains, and a few deformation twins (DTs) formed in grains with tensile axis (TA) nearly parallel to 111. In the MEA, three microstructure types were found depending on the grain orientations: (1) fine DCs developed in TA
//100-oriented grains; (2) planar dislocation structures (PDSs) formed in grains with other orientations; and (3) dense DTs adding to the PDSs developed in TA//111-oriented grains. The results imply difficulty in cross-slip of screw dislocations and dynamic recovery in the MEA, leading to an increase in the dislocation density and work-hardening rate. Our results suggest that FCC high-alloy systems with high friction stress inherently develop characteristic deformation microstructures advantageous for achieving high strength and large ductility.
K
(Zn
Mn
)
As studied by X-ray magnetic circular dichroism and resonant inelastic X-ray scattering鈴木 博人*; Zhao, G.*; 岡本 淳*; 坂本 祥哉*; Chen, Z.-Y.*; 野中 洋亮*; 芝田 悟朗; Zhao, K.*; Chen, B.*; Wu, W.-B.*; et al.
Journal of the Physical Society of Japan, 91(6), p.064710_1 - 064710_5, 2022/06
被引用回数：4 パーセンタイル：40.80(Physics, Multidisciplinary)The magnetic properties and the electronic excitations of the new diluted magnetic semiconductor BaK(ZnMn)As have been studied by X-ray magnetic circular dichroism (XMCD) and resonant inelastic X-ray scattering (RIXS). The sum rule analysis of the XMCD spectra indicates that the Mn atoms are in the high-spin configurations of 
, whereas the presence of competing ferromagnetic and antiferromagnetic interactions between the Mn ions reduces the net spin moment. Based on a comparison of the RIXS line shapes with those of GaMnAs, it is concluded that the ground state of Mn in BaK(ZnMn)As consists of both the 
and 
electron configurations.
Naeem, M.*; Zhou, H.*; He, H.*; Harjo, S.; 川崎 卓郎; Lan, S.*; Wu, Z.*; Zhu, Y.*; Wang, X.-L.*
Applied Physics Letters, 119(13), p.131901_1 - 131901_7, 2021/09
被引用回数：22 パーセンタイル：74.16(Physics, Applied)We investigated the in situ deformation behavior of the CrCoNi medium-entropy alloy at a cryogenic temperature of 140 K and compared it with deformation at room temperature. The sample exhibited higher strength and larger ductility at the cryogenic temperature. The CrCoNi alloy remained single-phase face-centered cubic at room temperature, while deformation at 140 K resulted in a martensitic transformation to the hexagonal close-packed structure. The phase transformation, an additional deformation mechanism to stacking faults, twinning, and dis- location slip, resulted in a higher work hardening at cryogenic temperature. The study addresses the structure metastability in the CrCoNi alloy, which led to the formation of epsilon-martensite from the intrinsic stacking faults.
He, H.*; Naeem, M.*; Zhang, F.*; Zhao, Y.*; Harjo, S.; 川崎 卓郎; Wang, B.*; Wu, X.*; Lan, S.*; Wu, Z.*; et al.
Nano Letters, 21(3), p.1419 - 1426, 2021/02
被引用回数：98 パーセンタイル：96.85(Chemistry, Multidisciplinary)In CrCoNi, a so-called medium-entropy alloy, an fcc-to-hcp phase transformation has long been anticipated. Here, we report an in situ loading study with neutron diffraction, which revealed a bulk fcc-to-hcp phase transformation in CrCoNi at 15 K under tensile loading. By correlating deformation characteristics of the fcc phase with the development of the hcp phase, it is shown that the nucleation of the hcp phase was triggered by intrinsic stacking faults. The confirmation of a bulk phase transformation adds to the myriads of deformation mechanisms available in CrCoNi, which together underpin the unusually large ductility at low temperatures.
Naeem, M.*; He, H.*; Harjo, S.; 川崎 卓郎; Zhang, F.*; Wang, B.*; Lan, S.*; Wu, Z.*; Wu, Y.*; Lu, Z.*; et al.
Scripta Materialia, 188, p.21 - 25, 2020/11
被引用回数：98 パーセンタイル：97.84(Nanoscience & Nanotechnology)The deformation behavior of CrMnFeCoNi high entropy alloy was investigated by in situ neutron diffraction at an ultralow temperature of 15 K. Analysis of the diffraction peak widths showed an extremely high dislocation density at 15 K, reaching 10
m
. In addition, the dislocation density was found to closely follow the development of texture caused by deformation. In contrast to deformation by dislocation slip at room temperature, the ultralow-temperature deformation also involved stacking faults, twinning and serrations. The deformation pathway at ultralow temperature is outlined which is responsible for the extraordinary strength-ductility combination.
Dupont, E.*; Bossant, M.*; Capote, R.*; Carlson, A. D.*; Danon, Y.*; Fleming, M.*; Ge, Z.*; 原田 秀郎; 岩本 修; 岩本 信之; et al.
EPJ Web of Conferences, 239, p.15005_1 - 15005_4, 2020/09
被引用回数：22 パーセンタイル：99.59(Nuclear Science & Technology)The OECD-NEA High Priority Request List (HPRL) is a point of reference to guide and stimulate the improvement of nuclear data for nuclear energy and other nuclear applications. The HPRL is application-driven and the requests are submitted by nuclear data users or representatives of the user's communities. A panel of international experts reviews and monitors the requests in the framework of an Expert Group mandated by the NEA Nuclear Science Committee Working Party on International Nuclear Data Evaluation Cooperation (WPEC). After approval, individual requests are divided in two priority categories only, whereas a third category now includes groups of generic requests in a well-defined area (e.g., dosimetry, standard). The HPRL is hosted by the NEA in the form of a relational database publicly available on the web. This contribution provides an overview of HPRL entries, status and outlook. Examples of requests successfully completed will be given and new requests will be described with emphasis on updated nuclear data needs in the fields of nuclear energy, neutron standards, dosimetry, and medical applications.
CoLokotko, T.*; Leblond, S.*; Lee, J.*; Doornenbal, P.*; Obertelli, A.*; Poves, A.*; Nowacki, F.*; 緒方 一介*; 吉田 数貴; Authelet, G.*; et al.
Physical Review C, 101(3), p.034314_1 - 034314_7, 2020/03
被引用回数：14 パーセンタイル：72.36(Physics, Nuclear)中性子過剰核であるCoに対する(
)ノックアウト反応が理化学研究所RIBFで測定された。
coincidenceの方法で準位構造が決定され、測定された包括的断面積および排他的断面積から暫定的ではあるがスピン・パリティが決定された。殻模型計算との比較により、Coの低励起状態には球形核と変形核が共存することが示唆された。
Naeem, M.*; He, H.*; Zhang, F.*; Huang, H.*; Harjo, S.; 川崎 卓郎; Wang, B.*; Lan, S.*; Wu, Z.*; Wang, F.*; et al.
Science Advances (Internet), 6(13), p.eaax4002_1 - eaax4002_8, 2020/03
被引用回数：284 パーセンタイル：99.42(Multidisciplinary Sciences)High-entropy alloys exhibit exceptional mechanical properties at cryogenic temperatures, due to the activation of twinning in addition to dislocation slip. The coexistence of multiple deformation pathways raises an important question regarding how individual deformation mechanisms compete or synergize during plastic deformation. Using in situ neutron diffraction, we demonstrate the interaction of a rich variety of deformation mechanisms in high-entropy alloys at 15 K, which began with dislocation slip, followed by stacking faults and twinning, before transitioning to inhomogeneous deformation by serrations. Quantitative analysis showed that the cooperation of these different deformation mechanisms led to extreme work hardening. The low stacking fault energy plus the stable face-centered cubic structure at ultralow temperatures, enabled by the high-entropy alloying, played a pivotal role bridging dislocation slip and serration.
Zhang, Y.*; Guo, H.*; Kim, S. B.*; Wu, Y.*; Ostojich, D.*; Park, S. H.*; Wang, X.*; Weng, Z.*; Li, R.*; Bandodkar, A. J.*; et al.
Lab on a Chip, 19(9), p.1545 - 1555, 2019/05
被引用回数：210 パーセンタイル：99.71(Biochemical Research Methods)汗中のバイオマーカーおよび非侵襲的な方法で汗を集める方法は、健康および生理学的状態の評価のための汗利用の関心を生み出し、スポーツから臨床医学までの範囲の潜在的用途がある。本論文は、皮膚密着型のマイクロ流体システムを用いた2つの結果について述べる。(1)簡易な身体的および心理的刺激による汗の採取、(2)酵素化学および比色アプローチによる汗中のクレアチニンおよび尿素の濃度の検出。結果、乳児や高齢者などを対象に日常的で非薬理学的な汗の捕捉が可能になり、腎臓疾患のスクリーニング/モニタリングに汗を使用する可能性が示された。
