検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 43 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Accuracy of measuring rebar strain in concrete using a diffractometer for residual stress analysis

安江 歩夢*; 川上 真由*; 小林 謙祐*; Kim, J.; 宮津 裕次*; 西尾 悠平*; 向井 智久*; 諸岡 聡; 兼松 学*

Quantum Beam Science (Internet), 7(2), p.15_1 - 15_14, 2023/05

Neutron diffraction is a noncontact method that can measure the rebar strain inside concrete. In this method, rebar strain and stress are calculated using the diffraction profile of neutrons irradiated during a specific time period. In general, measurement accuracy improves with the length of the measurement time. However, in previous studies, the measurement time was determined empirically, which makes the accuracy and reliability of the measurement results unclear. In this study, the relationship between the measurement time and the measurement standard deviation was examined for reinforced concrete specimens under different conditions. The aim was to clarify the accuracy of the measurement of rebar stress using the neutron diffraction method. It was found that if the optical setup of the neutron diffractometer and the conditions of the specimen are the same, there is a unique relationship between the diffraction intensity and the rebar stress standard deviation. Furthermore, using this unique relationship, this paper proposes a method for determining the measurement time from the allowable accuracy of the rebar stress, which ensures the accuracy of the neutron diffraction method.

論文

Insight on the mechanical properties of hierarchical porous calcium-silicate-hydrate pastes according to the Ca/Si molar ratio using ${it in situ}$ synchrotron X-ray scattering and nanoindentation test

Im, S.*; Jee, H.*; Suh, H.*; 兼松 学*; 諸岡 聡; Choe, H.*; 西尾 悠平*; 町田 晃彦*; Kim, J.*; Lim, S.*; et al.

Construction and Building Materials, 365, p.130034_1 - 130034_18, 2023/02

 被引用回数:3 パーセンタイル:58.24(Construction & Building Technology)

Nanocrystalline calcium-silicate-hydrate (C-S-H) is a typical heterogeneous material with a multiscale structure spanning a wide length scale from angstrom to micrometer, and whose structure is determined by the Ca/Si ratio. In this study, we directly applied compressive loads on synthetic C-S-H pastes with Ca/Si ratios of 0.6-1.2 and investigated their mechanical properties using the elastic modulus calculated at three length scale levels (i.e., angstrom to nanometer, micrometer, and millimeter) via in-situ synchrotron X-ray scattering, nanoindentation tests, and strain gauges, respectively. Further, $$^{29}$$Si nuclear magnetic resonance spectroscopy was conducted on the C-S-H pastes to elucidate the alterations in the silicate polymerization. The experimental results confirmed the deformation behavior of the C-S-H paste with different Ca/Si ratios under external loading, which was demonstrated to be transferred from the surface of the pastes to particles owing to the presence of multiscale pores.

論文

乾湿繰り返しによる乾燥程度の違いがコンクリート試験体内部の相対含水率に及ぼす影響

細川 隆行; 安江 歩夢*; Kim, J.; 栗田 圭輔; 兼松 学*

コンクリート構造物の補修,補強,アップグレード論文報告集(CD-ROM), 22, p.113 - 118, 2022/10

本研究では、乾湿繰り返しを行ったコンクリートの水分状態が鉄筋腐食に及ぼす影響を明らかにすることを目的とし、その前段階として、乾湿繰り返しにおける乾燥程度の違いが相対含水率に及ぼす影響を検討した。加えて、水分移動の影響が大きいひび割れ部に関して解析を行った。実験結果より、試験体中央の鉄筋軸垂直方向10mm範囲において、6時間吸水後40$$^{circ}$$Cの乾燥を42および90時間行った場合の相対含水率は、0$$sim$$5%程度しか差が生じず、20$$^{circ}$$Cの乾燥を90および186時間行った場合、10$$sim$$20%程度の差が生じた。また、ひび割れを有する試験体では、ひび割れ部における相対含水率は健全部と比較して、10$$sim$$15%程度高くなった。

論文

Effect of magnesium silicate hydrate (M-S-H) formation on the local atomic arrangements and mechanical properties of calcium silicate hydrate (C-S-H); In situ X-ray scattering study

Kim, G.*; Im, S.*; Jee, H.*; Suh, H.*; Cho, S.*; 兼松 学*; 諸岡 聡; 小山 拓*; 西尾 悠平*; 町田 晃彦*; et al.

Cement and Concrete Research, 159, p.106869_1 - 106869_17, 2022/09

 被引用回数:3 パーセンタイル:85.78(Construction & Building Technology)

This study explored the effect of M-S-H formation on the local atomic arrangements and mechanical properties of C-S-H. The elastic moduli of the samples were calculated using shifted atomic distances (r) and d-spacings (d) acquired by applying an external load on the pastes during X-ray scattering experiments. The experimental results indicated that the crystal structure of C-S-H remained intact with MgCl$$_{2}$$ addition. At the highest Mg/Si ratio (Ca/Si = 0.6, Mg/Si = 0.2), change in the dominant phase occurred from C-S-H to M-S-H because the low pH environment hindered the formation of C-S-H and facilitated the formation of M-S-H. The elastic modulus decreased with increasing Mg/Si ratio up to 0.1 owing to both C-S-H destabilization and low M-S-H content in the samples. Conversely, the elastic modulus increased in the paste synthesized with the highest Mg/Si ratio because considerable M-S-H had formed, which exhibited a higher elastic modulus than C-S-H.

論文

異形鉄筋の表面形状が鉄筋コンクリートの付着性能に及ぼす影響

小林 謙祐*; 安江 歩夢*; 諸岡 聡; 兼松 学*

コンクリート工学年次論文集(DVD-ROM), 44(1), p.208 - 213, 2022/07

異形鉄筋の表面形状がコンクリートとの付着性能に及ぼす影響を明らかにすることを目的とし、引抜試験および中性子回折法による鉄筋応力測定を実施した。実験結果より、引抜試験における付着応力-自由端すべり量曲線では、表面形状の違いによって大きく異なる結果となった。一方、鉄筋応力の測定では、各水準の応力分布に差異は見られなかった。したがって、鉄筋に自由端すべりが生じる条件下においては、鉄筋の表面形状が付着性能に影響を及ぼすことが推察された。

論文

Temperature effects on local structure, phase transformation, and mechanical properties of calcium silicate hydrates

Im, S.*; Jee, H.*; Suh, H.*; 兼松 学*; 諸岡 聡; 小山 拓*; 西尾 悠平*; 町田 晃彦*; Kim, J.*; Bae, S.*

Journal of the American Ceramic Society, 104(9), p.4803 - 4818, 2021/09

 被引用回数:8 パーセンタイル:84.8(Materials Science, Ceramics)

This study aims to elucidate the effect of heating on the local atomic arrangements, structure, phase transformation, and mechanical properties of synthesized calcium-silicate-hydrate (C-S-H). The alteration in the atomic arrangement of the synthesized C-S-H (Ca/Si = 0.8) and the formation of crystalline phases that occurred in three distinct transformation stages of dehydration (105-200 $$^{circ}$$C), decomposition (300-600 $$^{circ}$$C), and recrystallization (700-1000 $$^{circ}$$C) were investigated via powder X-ray diffraction, $$^{29}$$Si nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. Further, the deformation of the local atomic bonding environment and variations in mechanical properties during the three stages were assessed via pair distribution function analysis based on in-situ total X-ray scattering. The results revealed that the C-S-H paste before heating exhibited a lower elastic modulus in real space than that in the reciprocal space in the initial loading stage because water molecules acted as a lubricant in the interlayer. At the dehydration stage, the strain as a function of external loading exhibited irregular deformation owing to the formation of additional pores induced by the evaporation of free moisture. At the decomposition stage, the structural deformation of the main d-spacing (d $$approx$$ 3.0 ${AA}$) was similar to that of the real space before the propagation of microcracks. At the recrystallization stage, the elastic modulus increased to 48 GPa owing to the thermal phase transformation of C-S-H to crystalline $$beta$$-wollastonite. The results provide direct experimental evidence of the micro- and nanostructural deformation behavior of C-S-H pastes after exposure to high temperature under external loading.

論文

中性子回折法による溶融亜鉛めっき鉄筋を用いた鉄筋コンクリートの付着性能評価

小林 謙祐*; 鈴木 裕士; 西尾 悠平*; 兼松 学*

日本建築学会構造系論文集, 86(785), p.1026 - 1035, 2021/07

本研究では、亜鉛溶融めっき鉄筋を用いた鉄筋コンクリートの付着性能を評価することを目的として、基本的な応力場である圧縮応力場・引張応力場に加え、より実構造に生じる応力場に近い曲げ・せん断応力場の計3種類の応力場における付着応力の検証を行った。その結果、中性子回折法により、鉄筋コンクリートの高精度な付着性能評価が可能であり、さらにひび割れ等の破壊状況に応じた鉄筋応力の変化も精度よく測定が可能であることを確認した。また、圧縮応力場,引張応力場、そして曲げ・せん断応力場において、鉄筋応力分布の傾向および付着応力度より、めっき鉄筋は普通鉄筋と同等の付着性能を有していることが明らかになった。

論文

Determination of atomistic deformation of tricalcium silicate paste with high-volume fly ash

Jee, H.*; Im, S.*; 兼松 学*; 鈴木 裕士; 諸岡 聡; 小山 拓*; 町田 晃彦*; Bae, S.*

Journal of the American Ceramic Society, 103(12), p.7188 - 7201, 2020/12

 被引用回数:8 パーセンタイル:66.5(Materials Science, Ceramics)

We examined the influence of incorporating high-volume fly ash (FA) on the atomic structure and deformation behavior of calcium silicate hydrates (C-S-H) in tricalcium silicate (C$$_{3}$$H) paste upon exposure to external forces. Atomic structural changes and strains under compressive load were assessed using synchrotron in situ high-energy X-ray scattering-based atomic pair distribution function (PDF) analysis. Three different strain types, namely macroscopic strains, measured by a gauge attached to the specimen, strain in reciprocal space, (Bragg peak shifts), and strain in real space (PDF peak shift), were compared. All monitored and calculated strains for C$$_{3}$$H-FA (50 wt.% FA) paste were compared with those of pure C$$_{3}$$H paste. In the range of $$r$$ $$<$$ 10 ${AA}$, PDF analysis showed that C$$_{3}$$H-FA had a similar atomic structure to synthetic C-S-H followed by pure C$$_{3}$$H paste. The atomic strain of C$$_{3}$$H-FA in real space ($$r$$ $$<$$ 20 ${AA}$) was smaller than that of C$$_{3}$$H under compression, which suggests that the incompressibility of C-S-H on an atomistic scale is enhanced by fly ash incorporation. This may be caused by increased silicate polymerization of C-S-H due to the additional silicate provided by the fly ash.

論文

中性子イメージング技術を用いた鉄筋コンクリートの変形破壊挙動の評価

上野 一貴*; 鈴木 裕士; 高村 正人*; 西尾 悠平*; 兼松 学*

コンクリート構造物の補修,補強,アップグレード論文報告集(CD-ROM), 20, p.273 - 278, 2020/10

本研究では、鉄筋コンクリートの引張載荷時のコンクリート内部の変形を、中性子イメージング技術と画像相関法を組み合わせて評価する技術の確立を目的とした。コンクリート内部に散布したガドリニウムマーカの座標を中性子イメージング技術により取得し、その座標を基に画像相関法を用いてコンクリート内部の変位分布を算出する技術を開発した。本技術により、コンクリートに発生したひび割れに沿った変位分布が計測され、表面の画像解析と併用することで、載荷経過毎のコンクリート表面と内部の変形を同時に評価できることを示した。

論文

Analysis of atomistic structural deformation characteristics of calcium silicate hydrate in 53-year-old tricalcium silicate paste using atomic pair distribution function

Bae, S.*; Jee, H.*; Suh, H.*; 兼松 学*; 城 鮎美*; 町田 晃彦*; 綿貫 徹*; 菖蒲 敬久; 諸岡 聡; Geng, G.*; et al.

Construction and Building Materials, 237, p.117714_1 - 117714_10, 2020/03

 被引用回数:10 パーセンタイル:65.44(Construction & Building Technology)

Although the atomistic structure and the deformation characteristics of calcium silicate hydrates (C-S-H) are of primary interest in cement chemistry, they have not been fully investigated. In this study, pair distribution function (PDF) analysis was conducted on a 53-year-old fully hydrated tricalcium silicate (C$$_{3}$$S) paste using in situ synchrotron high-energy X-ray scattering to probe the atomic structural deformation of C-S-H under external loading. The results were compared with those from our previous PDF study of a 131-day-old C$$_{3}$$S paste in order to elucidate the effect of aging on the mechanical characteristics of C-S-H. Three different strains measured by the strain gauge, by the lattice shifts (d-spacing) in the reciprocal space, and by the shift of the interatomic distance (r) in the real space were compared. In the range of r $$<$$ 20 ${AA}$, where most of the information was derived from C-S-H, the 53-year-old C$$_{3}$$S paste had a higher overall elastic modulus (18.3 GPa) and better resistance to compressive stress than the 131-day-old C$$_{3}$$S paste (elastic modulus: 8.3 GPa). Moreover, it was found that the macroscopic strains of the 53-year-old C$$_{3}$$S paste were presumably induced by mechanical deformation such as microcracks at the macroscale. The results provide experimental evidence for the atomistic and mesoscale mechanical behavior of C-S-H in the early and late ages.

論文

受熱した鉄筋コンクリートの付着強度に及ぼす再水和の影響

宮部 あづさ*; 小山 拓*; 西尾 悠平*; 鈴木 裕士; 兼松 学*

コンクリート構造物の補修,補強,アップグレード論文報告集(CD-ROM), 19, p.59 - 64, 2019/10

本研究では、加熱後の再養生による鉄筋コンクリート(RC)の付着強度の回復メカニズムを解明するため、加熱履歴を600$$^{circ}$$C、再養生期間を0, 3, 7日とした冷間引抜試験および化学分析を行った。さらに、試験体内部を中性子トモグラフィーで可視化した。実験結果として、600$$^{circ}$$Cで加熱したRCの付着強度は再養生3日後には回復した。再水和したコンクリート中では、水酸化カルシウムが増加した一方でC$$_{2}$$Sが減少する傾向が見られた。また、加熱後に比べ再養生後は中性子線の透過率が低く、再水和により水和物が生成された可能性が示唆された。

論文

中性子ビーム技術を用いた鉄筋コンクリートの変形破壊挙動の評価

上野 一貴*; 鈴木 裕士; 小山 拓*; 西尾 悠平*; 兼松 学*

コンクリート構造物の補修,補強,アップグレード論文報告集(CD-ROM), 18, p.647 - 650, 2018/10

本研究では、中性子イメージング技術と画像処理技術を組み合わせることで、コンクリート内部に分散したガドリニウムマーカの動きを精度よく評価できる技術を開発した。次に、中性子イメージング技術と中性子回折法を組み合わせて、鉄筋コンクリートの引張載荷時の付着劣化挙動を評価した。その結果、中性子イメージング技術により得られるコンクリートの変形挙動と、中性子回折により得られる鉄筋の応力分布を比較・検討することで、鉄筋コンクリートの付着劣化挙動の評価が可能になることを示した。

論文

中性子回折法を応用した新しい付着応力度測定技術

鈴木 裕士; 楠 浩一*; 兼松 学*; 向井 智久*

コンクリート構造物の非破壊検査シンポジウム報文集,6, p.343 - 348, 2018/08

中性子回折法は材料深部の応力を非破壊・非接触で測定できる手法として良く知られている。われわれは、世界で初めて鉄筋コンクリートの付着力評価に中性子回折法を応用し、コンクリートに埋設された鉄筋の付着応力度分布の非破壊・非接触測定に成功した。これまでに、鉄筋コンクリートの定着力や曲げ付着力の評価、また、ひび割れや鉄筋腐食に伴う付着劣化の評価などに応用してきた。最近では、あと施工アンカーの付着性能評価など、新しい施工技術の開発研究にも応用が広がっている。本稿では、これまでに得られた成果を総括して紹介する。

論文

中性子技術を用いたRCの腐食ひび割れの補修による鉄筋付着性能回復の検証

関根 麻里子*; 鈴木 裕士; 兼松 学*

コンクリート工学年次論文集(DVD-ROM), 40(1), p.1545 - 1550, 2018/07

本論文は、これまで難しいとされてきた鉄筋コンクリート内の健全および腐食した鉄筋、さらに腐食ひび割れに補修を施した鉄筋コンクリート内の腐食鉄筋の応力分布を工学材料回折装置を用いて精度良く測定し、また、中性子イメージング装置を用いたCT撮影により試験体内部のひび割れ分布と補修材充填状態を確認した。検証の結果、腐食グレードによる付着応力度分布の変化を捉えることができた。また、腐食ひび割れに対して補修材を施工した場合、摩擦力の向上およびコンクリートの拘束効果の回復によって付着が回復することが確認された。

論文

Deformation analysis of reinforced concrete using neutron imaging technique

小山 拓*; 上野 一貴*; 関根 麻里子*; 松本 吉弘*; 甲斐 哲也; 篠原 武尚; 飯倉 寛; 鈴木 裕士; 兼松 学*

Materials Research Proceedings, Vol.4, p.155 - 160, 2018/05

 被引用回数:0 パーセンタイル:0.18

We developed, in this study, a novel method to observe internal deformation of concrete by the neutron transmission imaging technique. In order to visualize the internal deformation of concrete, the cement paste markers containing Gd$$_{2}$$O$$_{3}$$ powder were two-dimensionally dispersed around the ferritic deformed rebar in the reinforced concrete. This experiment was conducted using BL22, RADEN, in the Material and Life Science Experimental Facility of the Japan Proton Accelerator Research Complex. The transmission images of the reinforced concrete sample were taken at several positions on the vertical sample stage, and the displacement of the marker from the initial position was successfully evaluated within approximately $$pm$$0.1 mm accuracy by image analysis for selected markers with higher contrast and circularity. Furthermore, concrete deformation under pull-out loading to the embedded rebar was evaluated by the same way, and its reaction compressive deformation was successfully observed by analyzing the displacement of the markers. The results obtained in this study bring beneficial knowledge that the measurement accuracy of the marker displacement can be improved more by choosing a spherical shape of the marker and by increasing the contrast of the marker.

論文

中性子回折法による曲げとせん断を受けた鉄筋コンクリートの付着応力度の非破壊評価

鈴木 裕士; 楠 浩一*; 佐竹 高祐*; 兼松 学*; 小山 拓*; 丹羽 章暢*; 椛山 健二*; 向井 智久*; 川崎 卓郎; Harjo, S.

非破壊検査, 67(4), p.180 - 186, 2018/04

本研究では、中性子回折法により二次元的に配筋した主筋およびせん断補強筋の応力分布を測定することにより、曲げモーメントを負荷した鉄筋コンクリート梁試験体の付着挙動を評価した。その結果、周囲のコンクリートによる主筋横方向の変形拘束が無視できるほどに小さいという前提に基づき、試験体を回転することなく、曲げ付着挙動の評価の鍵となる主筋の付着応力度分布の変化、およびせん断補強筋の軸応力変化の定量評価に成功した。ひずみゲージ法により測定されたコンクリートの巨視的な変形挙動との比較により、載荷に伴う曲げひび割れの発生と、それに続くせん断ひび割れの発生が、その周辺における付着劣化の原因となり、それに伴い主筋軸応力分布が変化することを確認した。本研究により、中性子応力測定技術は、鉄筋コンクリート梁の曲げ付着挙動の評価にも有効な手段であることを確認した。

論文

Pair distribution function analysis of nanostructural deformation of calcium silicate hydrate under compressive stress

Bae, S.*; Jee, H.*; 兼松 学*; 城 鮎美*; 町田 晃彦*; 綿貫 徹*; 菖蒲 敬久; 鈴木 裕士

Journal of the American Ceramic Society, 101(1), p.408 - 418, 2018/01

 被引用回数:13 パーセンタイル:62.66(Materials Science, Ceramics)

ケイ酸カルシウム水和物(CSH)に関する原子レベルの構造や変形機構には不明な点が多い。本研究では、X線散乱法に基づく原子対相関関数(PDF)により、ケイ酸三カルシウム(C$$_{3}$$S)ペースト中に存在するCSH相のナノ構造変形挙動を評価した。単軸圧縮負荷を受けるC$$_{3}$$Sペーストの変形を、ひずみゲージ,ブラッグピークシフト, PDFから求められるマクロからミクロな変形より評価した。PDF解析により、0-20${AA}$の範囲ではCSH相の影響が支配的であること、その一方で、20${AA}$を超える範囲では、他の結晶相の影響が支配的であることが明らかとなった。CSHの変形に支配的である20${AA}$以下の範囲では、塑性変形を示すステージI(0-10MPa)と、弾性変形を示すステージIIの2つの変形過程に分けられることが分かった。その一方で、20${AA}$以上の範囲では、水酸化カルシウムに似た変形を示した。10MPa以下では、層間水やゲル水の移動に伴い、CSHの高密度化を生じたと考えられるが、除荷後には、その移動した水がCSH中に戻ることにより、変形が回復している可能性がある。

論文

中性子回折法による鉄筋コンクリートの付着応力度分布の非破壊測定

鈴木 裕士; 楠 浩一*; 兼松 学*; 向井 智久*

コンクリート構造物の補修,補強,アップグレード論文報告集, 17, p.179 - 184, 2017/10

中性子回折法は材料深部の残留応力を非破壊・非接触で測定できる手法の一つとして知られている。われわれは、世界で初めて、鉄筋コンクリートの付着挙動の評価に中性子回折法を応用し、コンクリート内部に埋設された鉄筋の付着応力度分布の非破壊・非接触測定に成功するとともに、コンクリートのひび割れや鉄筋腐食に伴う応力分布の変化を捉えることにも成功した。このように、中性子回折法は鉄筋コンクリートの付着挙動の評価に有効なひずみ測定技術であり、今後、鉄筋コンクリートの構造力学研究や構造材料研究に広く応用されると期待される。本論文では、これまでに得られた成果を総括する。

論文

Structural engineering studies on reinforced concrete structure using neutron diffraction

鈴木 裕士; 楠 浩一*; 兼松 学*; 向井 智久*; Harjo, S.

Materials Research Proceedings, Vol.2, p.25 - 30, 2017/00

 被引用回数:3 パーセンタイル:70.97

これまでの研究において、コンクリート内部の鉄筋の応力分布を測定するうえで、中性子回折法はひずみゲージ法に代わる新たな測定技術になりうることが示された。本研究においては、鉄筋コンクリート構造の構造力学研究における中性子回折法のさらなる可能性を見出すために、中性子回折法による付着応力度評価の可能性について検討した。中性子回折法により測定した付着応力度分布には、鉄筋とコンクリート間の不均一な付着状態を示唆するいくつかのピークが見られた。この結果は、位置分解能の高い中性子回折法により、鉄筋の節周りに生じる局所的な付着抵抗状態の評価が可能であることを示している。中性子回折法により測定した付着応力度分布は、鉄筋コンクリート構造における鉄筋とコンクリート間の付着メカニズムの詳しい理解につながるものと期待される。

論文

Nanostructural deformation analysis of calcium silicate hydrate in Portland cement paste by atomic pair distribution function

鈴木 裕士; Bae, S.*; 兼松 学*

Advances in Materials Science and Engineering, 2016, p.8936084_1 - 8936084_6, 2016/00

 被引用回数:1 パーセンタイル:7.62(Materials Science, Multidisciplinary)

圧縮負荷におけるポートランドセメント硬化体(PC硬化体)のカルシウムシリケート化合物(CSH)のナノ構造の変形挙動を、シンクロトロン放射光により測定した原子対相関関数(PDF)により評価することに成功した。PC硬化体のPDFは、CSH粒子のサイズに一致する2.0nm以下の短距離構造に特異な変形挙動を示した。一方で、それ以上の長距離構造では、ブラッグ回折のピークシフトから得られた水酸化カルシウム相(CH)の変形挙動にほぼ一致した。CSHの圧縮変形挙動は粒状材料の変形挙動に類似しており、CSH粒子間のすべりと密度の変化に起因した3つの変形段階に分けることができた。このように、PDFを応用することにより、PC硬化体のCSHナノ構造の変形機構を理解できる可能性のあることを示した。

43 件中 1件目~20件目を表示