検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 20 件中 1件目~20件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Microstructure and plasticity evolution during L$"u$ders deformation in an Fe-5Mn-0.1C medium-Mn steel

小山 元道*; 山下 享介*; 諸岡 聡; 澤口 孝宏*; Yang, Z.*; 北條 智彦*; 川崎 卓郎; Harjo, S.

ISIJ International, 62(10), p.2036 - 2042, 2022/10

 被引用回数:4 パーセンタイル:67.13(Metallurgy & Metallurgical Engineering)

The local plasticity and associated microstructure evolution in Fe-5Mn-0.1C medium-Mn steel (wt.%) were investigated in this study. Specifically, the micro-deformation mechanism during L$"u$ders banding was characterized based on multi-scale electron backscatter diffraction measurements and electron channeling contrast imaging. Similar to other medium-Mn steels, the Fe-5Mn-0.1C steel showed discontinuous macroscopic deformation, preferential plastic deformation in austenite, and deformation-induced martensitic transformation during L$"u$ders deformation. Hexagonal close-packed martensite was also observed as an intermediate phase. Furthermore, an in-situ neutron diffraction experiment revealed that the pre-existing body-centered cubic phase, which was mainly ferrite, was a minor deformation path, although ferrite was the major constituent phase.

論文

Hierarchical deformation heterogeneity during L$"u$ders band propagation in an Fe-5Mn-0.1C medium Mn steel clarified through ${it in situ}$ scanning electron microscopy

小山 元道*; 山下 享介*; 諸岡 聡; Yang, Z.*; Varanasi, R. S.*; 北條 智彦*; 川崎 卓郎; Harjo, S.

ISIJ International, 62(10), p.2043 - 2053, 2022/10

 被引用回数:2 パーセンタイル:34.75(Metallurgy & Metallurgical Engineering)

${it In situ}$ deformation experiments with cold-rolled and intercritically annealed Fe-5Mn-0.1C steel were carried out at ambient temperature to characterize the deformation heterogeneity during L$"u$ders band propagation. Deformation band formation, which is a precursor phenomenon of L$"u$ders band propagation, occurred even in the macroscopically elastic deformation stage. The deformation bands in the L$"u$ders front grew from both the side edges to the center of the specimen. After macroscopic yielding, the thin deformation bands grew via band branching, thickening, multiple band initiation, and their coalescence, the behavior of which was heterogeneous. Thick deformation bands formed irregularly in front of the region where the thin deformation bands were densified. The thin deformation bands were not further densified when the spacing of the bands was below $$sim$$10 $$mu$$m. Instead, the regions between the deformation bands showed a homogeneous plasticity evolution. The growth of the thin deformation bands was discontinuous, which may be due to the presence of ferrite groups in the propagation path of the deformation bands. Based on these observations, a model for discontinuous L$"u$ders band propagation has been proposed.

論文

高強度薄鋼板の水素脆化メカニズム

北條 智彦*; 柴山 由樹; 味戸 沙耶*; 小山 元道*; 秋山 英二*

まてりあ, 61(7), p.413 - 418, 2022/07

本稿では自動車用高強度鋼板の水素脆化研究の紹介、および著者らの最近の研究成果の紹介を行った。自動車用高強度鋼板は優れた延性やプレス成形性を確保するため、微細組織を鋼中に微細均一に残留$$gamma$$を存在させた複相組織とすることが検討されており、水素脆化挙動に及ぼす微細組織の影響をより複雑化する。また、曲げ加工、深絞り加工、穴広げ加工、せん断加工等のプレス成形様式によって変形様式が大きく異なり、高強度鋼板に付与される塑性ひずみ、残留応力が異なるため、プレス加工も高強度鋼板の水素脆化特性評価を複雑化する因子となっている。自動車用高強度鋼板の水素脆化特性評価、水素脆化挙動の詳細な解析は、微細組織の複相化の効果、応力、塑性ひずみの効果を複合的に考慮する必要があり、これまでの高力ボルトの水素脆化研究から得られた知見をもとに、今後、自動車用高強度鋼板の耐水素脆化特性に関する研究がさらに進むことが期待される。

論文

張出し成形した焼戻しマルテンサイト鋼板の水素脆化に及ぼす残留応力の影響

西村 隼杜*; 北條 智彦*; 味戸 沙耶*; 柴山 由樹*; 小山 元道*; 齋藤 寛之*; 城 鮎美*; 安田 良*; 菖蒲 敬久; 秋山 英二*

鉄と鋼, 107(9), p.760 - 768, 2021/09

 被引用回数:0 パーセンタイル:0(Metallurgy & Metallurgical Engineering)

本研究では、球頭パンチを用いて張出し加工を施した引張強さ1000MPa級の一般的な焼戻しマルテンサイト鋼をプレス成形部品のモデルサンプルとして採用し、その水素脆化特性を評価した。残留応力分布は、SPring-8のBL14B1の白色X線を用いたエネルギー分散XRDによって求めた。さらにFEMを用いて張出し加工後の試験片の残留応力、および塑性ひずみ分布を解析した。その結果、水素チャージにより張出し試験片の張出し側のFoot部で、面対称に2つのき裂が発生し、半径方向に伝播すること、XRDとFEMにより得られた残留応力分布によると、円周方向の引張応力はFoot部で最大値を示し、この円周方向の最大引張応力が作用した位置はき裂発生位置とよく一致し、応力がき裂発生の要因となっていることなどが示唆された。

論文

Effects of stress and plastic strain on hydrogen embrittlement fracture of a U-bent martensitic steel sheet

柴山 由樹; 北條 智彦*; 小山 元道*; 齋藤 寛之*; 城 鮎美*; 安田 良*; 菖蒲 敬久; 松野 崇*; 秋山 英二*

ISIJ International, 61(4), p.1322 - 1329, 2021/04

 被引用回数:3 パーセンタイル:26.82(Metallurgy & Metallurgical Engineering)

The effects of stress and plastic strain distributions on the hydrogen embrittlement fracture of the U-bent martensitic steel sheet specimen were investigated. The hydrogen embrittlement testing of the U-bent specimen was performed. Fracture morphology mainly consisting of intergranular fracture was found inside the hydrogen charged U-bent specimen, which indicated that the crack initiation took place in the interior, and shear lips were found near both surfaces of the U-bent sheet. The synchrotron X-ray diffraction measurement and the finite element simulation were utilized to analyze the stress and plastic strain distributions in the thickness direction of the U-bent specimen. The elastic strain distributions obtained by the measurement showed a good agreement with the simulation. The crack initiation site of the hydrogen-charged U-bent specimen was considered to be correspondent with the region where the tensile stress was the highest, suggesting that the maximum tensile stress predominantly determine the crack initiation.

論文

Effects of residual stress on hydrogen embrittlement of a stretch-formed tempered martensitic steel sheet

西村 隼杜*; 北條 智彦*; 味戸 沙耶*; 柴山 由樹*; 小山 元道*; 齋藤 寛之*; 城 鮎美*; 安田 良*; 菖蒲 敬久; 秋山 英二*

ISIJ International, 61(4), p.1170 - 1178, 2021/04

 被引用回数:3 パーセンタイル:26.82(Metallurgy & Metallurgical Engineering)

The effects of residual stress on the hydrogen embrittlement behavior of a tempered martensitic steel sheet with 1-GPa-class tensile strength stretch-formed by a hemisphere punch simulating press-formed automotive structural parts were investigated. Cracking on the stretch-formed specimen induced by potentiostatic hydrogen charging was initiated in the foot of the impression of the specimen and propagated to the radial direction both toward the hillside and the plain. The mixture of quasi cleavage and intergranular fractures were observed whole through the fracture surface. Residual stress in the stretch-formed specimens was analyzed by using energy-dispersive X-ray diffraction method utilizing the synchrotron X-ray radiation at SPring-8. In addition, stress and plastic strain distributions in the specimen were analyzed by using Finite Element Method (FEM). These analyses depicted that the high tensile stress in the circumferential direction was in the foot of the impression, corresponding to the direction of the crack growth. The FEM analysis revealed that the high triaxial stress was in the foot suggesting accumulation of hydrogen. It was considered that the preferential crack initiation at the foot was promoted by the high residual stress in the circumferential direction and the hydrogen accumulation due to stress-induced diffusion.

論文

Hydrogen embrittlement resistance of pre-strained ultra-high-strength low alloy TRIP-aided steel

北條 智彦*; Kumai, B.*; 小山 元道*; 秋山 英二*; 脇 裕之*; 齋藤 寛之*; 城 鮎美*; 安田 良*; 菖蒲 敬久; 長坂 明彦*

International Journal of Fracture, 224(2), p.253 - 260, 2020/08

 被引用回数:13 パーセンタイル:67.91(Materials Science, Multidisciplinary)

本研究では、超高強度変態誘起塑性ベイナイトフェライト鋼の水素脆化特性に及ぼす予ひずみの影響を自動車フレーム部品への応用に向けて調査した。具体的には、3から10%の引張予ひずみでは全伸びに比べて水素による機械的劣化を抑制したが、12から15%の予ひずみ試験片では、水素充填後に伸びを示さなかった。これは3から10%の予ひずみの有利な効果が、残留オーステナイトに関連する亀裂発生の抑制に起因していたためであり、事前に予ひずみが与えられたTRIP鋼では、水素チャージ前に保持されたオーステナイトの体積分率が減少され、それによって優先的な亀裂開始サイトと伝播経路の既存の確率を減少させたと考えられる。一方、12から15%などの高い予ひずみを与えると、加工硬化のために予ひずみが効果的に機能せず、その結果、水素脆化感受性が増加し、転位の増殖により水素含有量が大幅に増加したと考えられる。

論文

Melting of Pb charge glass and simultaneous Pb-Cr charge transfer in PbCrO$$_{3}$$ as the origin of volume collapse

Yu, R.*; 北條 元*; 綿貫 徹; 水牧 仁一朗*; 溝川 貴司*; 岡 研吾*; Kim, H.*; 町田 晃彦; 榊 浩司*; 中村 優美子*; et al.

Journal of the American Chemical Society, 137(39), p.12719 - 12728, 2015/10

 被引用回数:33 パーセンタイル:69.49(Chemistry, Multidisciplinary)

立方晶ペロブスカイトPbCrO$$_{3}$$が常温常圧において、鉛の価数に関する電荷ガラス状態であり、その結果、鉛の位置にランダムネスのある構造をとっていることを明らかにした。鉛の価数は2価と4価に価数分離しており、鉛の位置は、A-site中心からのシフトが3倍周期の縦波型変調を持つ2つの副格子で表される短距離秩序を持つことを明らかにした。加圧すると鉛-クロム間の電荷移動が生じ、それにより電荷ガラスが解消され、絶縁体-金属相転移が起こることも明らかにした。この圧力誘起の電荷ガラス融解が、PbCrO$$_{3}$$で知られていた大きな体積収縮を伴った立方晶-立方晶の同型構造相転移の起源であることが分かった。

論文

New PbTiO$$_{3}$$-type giant tetragonal compound Bi$$_{2}$$ZnVO$$_{6}$$ and its stability under pressure

Yu, R.*; 北條 元*; 岡 研吾*; 綿貫 徹; 町田 晃彦; 清水 啓佑*; 中野 紀穂*; 東 正樹*

Chemistry of Materials, 27(6), p.2012 - 2017, 2015/03

 被引用回数:26 パーセンタイル:62.78(Chemistry, Physical)

新しいPbTiO$$_{3}$$型ペロブスカイト化合物であるBi$$_{2}$$ZnVO$$_{6}$$の合成に成功した。正方晶の軸比が1.26と大きな軸異方性を持ち、点電荷モデルから計算される分極はPbTiO$$_{3}$$型ペロブスカイト化合物のなかでは最大を示す。この化合物は圧力誘起構造相転移を起こし、6万気圧で分極のないGdFeO$$_{3}$$型構造へと変化する。

論文

Suppression of temperature hysteresis in negative thermal expansion compound BiNi$$_{1-x}$$Fe$$_{x}$$O$$_{3}$$ and zero-thermal expansion composite

奈部谷 光一郎*; 村松 裕也*; 岡 研吾*; 中野 紀穂*; 北條 元*; 水牧 仁一朗*; 安居院 あかね; 肥後 祐司*; 林 直顕*; 高野 幹夫*; et al.

Applied Physics Letters, 106(6), p.061912_1 - 061912_5, 2015/02

 被引用回数:58 パーセンタイル:89.01(Physics, Applied)

ほとんどの物質は温度が上昇すると、熱膨張によって長さや体積が増大する。光通信や半導体製造などの精密な位置決めが要求される局面では、このわずかな熱膨張が問題になる。そこで、昇温に伴って収縮する「負の熱膨張」を持つ物質によって、構造材の熱膨張を補償することが行われている。本研究において、室温付近で既存材料の2倍以上の大きさの「負の熱膨張」を示す酸化物材料を発見した。添加元素の量を変化させることで負の熱膨張が現れる温度域を制御できるほか、これまでの材料の問題点だった温度履歴が抑制されている。

論文

Superconductivity in noncentrosymmetric iridium silicide Li$$_2$$IrSi$$_3$$

Pyon, S.*; 工藤 一貴*; 松村 純一*; 石井 博文*; 松尾 元太*; 野原 実*; 北條 元*; 岡 研吾*; 東 正樹*; Garlea, V. O.*; et al.

Journal of the Physical Society of Japan, 83(9), p.093706_1 - 093706_5, 2014/09

 被引用回数:33 パーセンタイル:82.83(Physics, Multidisciplinary)

The effects of lithium absorption on the crystal structure and electronic properties of IrSi$$_3$$, a binary silicide with a noncentrosymmetric crystal structure, were studied. X-ray and neutron diffraction experiments revealed that hexagonal IrSi$$_3$$ (space group $$P6_3mc$$) transforms into trigonal Li$$_2$$IrSi$$_3$$ (space group $$P31c$$) upon lithium absorption. The structure of Li$$_2$$IrSi$$_3$$ is found to consist of a planar kagome network of silicon atoms with Li and Ir spaced at unequal distances between the kagome layers, resulting in a polar structure along the c-axis. Li$$_2$$IrSi$$_3$$ exhibited type-II superconductivity with a transition temperature $$T_{rm c}$$ of 3.8 K, displaying a structure type that no previous superconductors have been reported to have.

論文

Magnetic structures of FeTiO$$_3$$-Fe$$_2$$O$$_3$$ solid solution thin films studied by soft X-ray magnetic circular dichroism and ab initio multiplet calculations

北條 元*; 藤田 晃司*; 池野 豪一*; 的場 智彦*; 溝口 照康*; 田中 功*; 中村 哲也*; 竹田 幸治; 岡根 哲夫; 田中 勝久*

Applied Physics Letters, 104(11), p.112408_1 - 112408_5, 2014/03

AA2015-0416.pdf:1.6MB

 被引用回数:7 パーセンタイル:34.83(Physics, Applied)

The solid solutions between ilmenite and hematite have recently attracted considerable attention as a spintronic material due to their interesting magnetic and electrical properties. In this study, the electronic and magnetic structures of epitaxially grown ilmenite-hematite solid solution thin films were investigated by combining X-ray absorption near-edge structure (XANES), X-ray magnetic circular dichroism (XMCD) for two different crystallographic projections, and first-principles theoretical calculations.

論文

Characterization of air-exposed surface $$beta$$-FeSi$$_{2}$$ fabricated by ion beam sputter deposition method

斉藤 健; 山本 博之; 山口 憲司; 仲野谷 孝充; 北條 喜一; 原口 雅晴*; 今村 元泰*; 松林 信行*; 田中 智章*; 島田 広道*

Nuclear Instruments and Methods in Physics Research B, 206, p.321 - 325, 2003/05

 被引用回数:7 パーセンタイル:46.85(Instruments & Instrumentation)

放射光を利用したX線光電子分光法(XPS)を用い、$$beta$$-FeSi$$_{2}$$の表面酸化過程を解析した。Si(111)基板表面に$$beta$$-FeSi$$_{2}$$を生成後、約2日間大気曝露を行い、表面酸化を試みた。XPSによりシリサイド表面の非破壊深さ方向分析を行った結果、シリサイドはアイランド状の構造をとっており、基板のSi表面も一部露出した構造をとっていることが明らかとなった。シリサイド精製時のアニール温度や初期膜厚の違いにより、表面組成が異なることが明らかとなった。シリサイド表面がSiリッチな状態の試料に関し表面酸化を行った場合には、表面に非常に薄いSiO$$_{2}$$薄膜が生成し、シリサイドがほとんど酸化されなかった。しかしながら、Feリッチな試料の場合にはシリサイドが著しく酸化されることが確認された。このことから、表面付近に生成するSiO$$_{2}$$酸化物相がシリサイド薄膜の酸化保護膜として機能していることが推測された。

論文

Fabrication of $$beta$$-FeSi$$_{2}$$ thin films on Si(III) surface by solid phase epitaxy (SPE) analyzed by means of synchrotron radiation XPS (SR-XPS)

斉藤 健; 山本 博之; 朝岡 秀人; 原口 雅晴*; 今村 元泰*; 松林 信行*; 田中 智章*; 島田 広道*; 北條 喜一

Analytical Sciences (CD-ROM), 17(Suppl.), p.1073 - 1076, 2002/03

放射光を利用したX線光電子分光法(SR-XPS)を用い、$$beta$$-FeSi$$_{2}$$生成過程におけるSi,Feの深さ方向組成分布の解析を試みた。Si(111)基板表面に室温で100Å Feを蒸着し、723Kでアニールを行うことにより、$$beta$$-FeSi$$_{2}$$薄膜の作成を試みた。励起X線エネルギー200~1000eVの範囲でFe/Si比の励起X線エネルギー依存性を解析した。IMFP値を用いたFe,Siの深さ方向分布シミュレーションの結果と実験により得られたFe/Si比とを比較した結果、Fe蒸着後のアニールにより、Siが表面のFe相中に次第に拡散することが明らかとなった。Fe 2p XPSスペクトル,価電子帯光電子スペクトルそれぞれを測定した結果、723Kのアニールでは$$beta$$-FeSi$$_{2}$$の生成は起こらず、$$varepsilon$$相のみの生成が確認された。973Kでアニールを行った場合には$$beta$$-FeSi$$_{2}$$の生成が確認され$$beta$$-FeSi$$_{2}$$生成には、より高温でのアニールが必要であることが明らかになった。

論文

Formation process of $$beta$$-FeSi$$_{2}$$ on Si(111) substrate studied by means of SR-XPS

斉藤 健; 山本 博之; 原口 雅晴*; 今村 元泰*; 松林 信行*; 田中 智章*; 島田 広道*; 北條 喜一

Photon Factory Activity Report 2001, (19), P. 205, 2001/00

放射光を利用したX線光電子分光法(XPS)を用い、$$beta$$-FeSi$$_{2}$$生成過程におけるSi, Feの深さ方向組成分布の解析を試みた。Si(111)基板表面に室温でFeを蒸着後、523K, 723K, 973Kと段階的にアニールを行い、Si/Fe組成の変化の様子を放射光を用いたXPSにより解析した。励起X線エネルギー200$$sim$$1000eVの範囲でFe/Si比の励起X線エネルギー依存性を解析し、深さ方向分布の解析を行った。実験結果とIMFP値を用いたFe, Siの深さ方向分布シミュレーションの結果と比較した結果、室温でFe蒸着後のアニールを行うことにより、Siが表面のFe相中に次第に拡散することが明らかとなった。その際、Fe層は基板表面に島状構造を形成することも、同時に明らかとなった。また、シミュレーションの結果、島状構造をしたシリサイドは、基板表面50%程度覆っていることも明らかとなった。

論文

Investigation on the $$beta$$-FeSi$$_{2}$$ formation mechanisms on Si(111) substrate by means of SR-XPS

斉藤 健; 山本 博之; 北條 喜一; 松林 信行*; 今村 元泰*; 島田 広道*

Photon Factory Activity Report 2000, P. 82, 2000/00

放射光を用いたX線光電子分光法(SR-XPS)により$$beta$$-FeSi$$_{2}$$生成条件の最適化を行うことを目的としてその生成過程について検討した。実験は高エネルギー加速器研究機構,放射光研究施設,BL-13Cにて行った。Si(111)基板表面に超高真空中でFeを2nm蒸着した後、473$$sim$$973Kの範囲でそれぞれ15分加熱した。各試料について、内殻軌道のスペクトルからFe/Si組成比の深さ方向分布を、価電子スペクトルから物性評価を行った。内殻軌道の強度比を評価することによりFe-Si相互拡散過程の定量的な解析を可能とした。さらに価電子スペクトルからの673K以上で$$beta$$-FeSi$$_{2}$$の生成が始まることを明らかにした。

口頭

中Mn鋼における不均一塑性変形挙動の解析戦略

小山 元道*; 北條 智彦*; 宮本 吾郎*; 諸岡 聡; 山下 享介; 澤口 孝宏*; 峯 洋二*; 眞山 剛*; 興津 貴隆*; 榊原 睦海*; et al.

no journal, , 

高強度-高延性鋼を開発するために近年盛んに研究されてきた対象は、高Mn鋼と変態誘起塑性(TRIP)鋼である。高Mn鋼の研究を通して、Mn利用による積層欠陥エネルギーおよび相変態挙動の制御の重要性が再認識された。また、素材コストも睨みながら、従来の延性強度バランスを打破するには、未変態オーステナイトのTRIP効果を利用することが有効であるとの見方も広く受け入れられてきた。これら高Mn鋼とTRIP鋼の研究が合流する形で、TRIP効果を示す中Mn鋼が注目されている。中Mn鋼は優れた延性強度バランスを示す。しかし、複相であること、化学組成や熱処理条件に敏感であること、変形誘起マルテンサイト変態を示すこと、大きなリューダース変形を示すこと、応力ひずみ応答においてセレーションが現れること等に起因して、非常に複雑な塑性変形挙動を呈する。そのため、その優れた力学特性発現の機構は未だ不明瞭である。本講演では、その優れた力学特性の原因を組織発達および塑性変形挙動解析に基づいて明らかとするための研究戦略を示し、その妥当性と応用展開を広く議論する。

口頭

Multi-scale in situ characterization of micro-deformation during L$"u$ders band propagation in a medium Mn steel

小山 元道*; 山下 享介*; 諸岡 聡; Yang, Z.*; Varanasi, R.*; 北條 智彦*; 川崎 卓郎; Harjo, S.

no journal, , 

The micro-deformation of an Fe-5Mn-0.1C medium Mn steel consisting of face-centered cubic and body-centered cubic phases was characterized through multi-scale in situ scanning electron microscopy. Specifically, multiscale in situ back-scatter electron imaging coupled with ex situ electron backscatter diffraction measurements was conducted under tensile testing. The Fe-Mn-C alloy showed macroscopically localized deformation (i.e., L$"u$ders deformation), and the deformation-localized region consisted of multiple find deformation bands. The hierarchical structure of the deformation bands initiated from a specimen side edge and propagated to the other side edge. More microscopically, the plastic deformation preferentially progressed in a face-centered cubic phase, and temporarily stopped when the fine deformation band encountered a group of body-centered cubic grains, which resulted in zigzag propagation of the fine deformation bands. Through coalescence of fine deformation bands, a thick macroscopic deformation band formed. By repetition of the micro-deformation process, the thick deformation band front moved along the tensile direction from an end of the gauge portion to the other end.

口頭

中Mn鋼におけるリューダース変形挙動のマルチスケール解析

小山 元道*; 北條 智彦*; Varanasi, R.*; 山下 享介*; 諸岡 聡; 川崎 卓郎; Harjo, S.

no journal, , 

鉄鋼材料では、リューダース変形のようなマクロ不均一変形から微視組織に依存したミクロ不均一変形まで、様々なスケールでの不均一塑性発達が知られる。特に、近年発展が著しい高強度複相鋼板ではミクロレベルの不均一塑性発達が著しく、これが強くマクロ力学特性に影響している。つまり、マクロ変形および特性を制御するためにはミクロ変形を理解することが不可欠となっている。例えば、高延性高強度を両立する中Mn鋼の不均一塑性発達は、初期組織だけでなく、変態誘起塑性に由来した変形中における結晶構造変化(マルテンサイト変態)が、ミクロ変形挙動を複雑化させている。降伏挙動だけを考える場合でも、フェライトと準安定オーステナイトで構成される微細等軸粒を有する中Mn鋼では、その複相組織およびマルテンサイト変態に由来したミクロ不均一変形だけでなく、これに連動したマクロな不均一変形、すなわちリューダース変形が起こるためにその理解は容易ではない。この複雑性のため、中Mn鋼の降伏挙動は未だ研究が続いている。本講演では、マルチスケールその場観察を通して得られた中Mn鋼のリューダース変形挙動の一端を示す。

口頭

Ir錯体を用いた張出し成形高強度鋼板の水素拡散挙動解析

味戸 沙耶*; 西村 隼杜*; 北條 智彦*; 小山 元道*; 藤田 健一*; 柿沼 洋*; 秋山 英二*; 柴山 由樹

no journal, , 

近年、自動車車体の軽量化による燃費の向上を目的として、自動車用鋼板は高強度化が進められている。しかし、鉄鋼材料は高強度化にともない、水素脆化感受性の増加が問題となる。自動車用鋼板は、プレス成形にともない材料内部には塑性ひずみと残留応力が不均一に導入される。この不均一な塑性ひずみおよび残留応力は、材料中での水素拡散挙動へ影響し、鋼中の水素濃度分布が局在化する可能性がある。したがって、プレス成形鋼板の水素脆化特性を理解するためには、プレス成形で導入される塑性ひずみや残留応力で変化する水素拡散挙動を明らかにする必要がある。我々は、これまで水素と反応すると色が変化するIr錯体を用いた水素可視化法の開発に取り組み、純鉄を透過した水素を可視化することに成功した。本研究では、この水素可視化法を張出し成形鋼板へ適用し、水素拡散挙動の分布解析を試みた。さらに、有限要素法(FEM)を用いて塑性ひずみと残留応力分布を解析し、塑性ひずみと残留応力が水素拡散挙動へ与える影響を調査した。

20 件中 1件目~20件目を表示
  • 1