Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
安藤 勝訓; 廣瀬 悠一*; 唐戸 孝典*; 渡邊 壮太*; 井上 修*; 川崎 信史; 江沼 康弘*
Journal of Pressure Vessel Technology, 136(4), p.041406_1 - 041406_10, 2014/08
被引用回数:8 パーセンタイル:43.94(Engineering, Mechanical)構造不連続部のクリープ疲労評価法の比較評価のため、改良9Cr-1Mo鋼切り欠き試験体によるクリープ疲労試験を実施した。試験は単軸の引張り-圧縮試験及びインダクションコイルを用いた熱荷重による試験を行った。応力集中部の応力は切り欠き半径により調整した。種々のクリープ疲労評価法により寿命評価を行うために有限要素法解析を実施するとともに、その予測寿命と試験寿命の比較検証を行った。クリープ疲労評価法としては応力再配分軌跡法(SRL法),弾性追従法,高速炉規格による方法等を採用した。これらの比較によりすべての試験結果に対してSRL法が最も適切な予測寿命を与えることが確認された。高速炉規格については繰り返し数で70倍以上安全側の評価を与えることが確認された。
安藤 勝訓; 廣瀬 悠一*; 唐戸 孝典*; 渡邊 壮太*; 井上 修*; 川崎 信史; 江沼 康弘*
Proceedings of 2011 ASME Pressure Vessels and Piping Conference (PVP 2011) (CD-ROM), 11 Pages, 2011/07
To compare and evaluate these estimation methods, a series of creep-fatigue test was carried out with notched specimens. All the specimens were made of Mod.9Cr-1Mo steel. Deformation controlled creep-fatigue tests and temperature controlled creep-fatigue tests were performed and creep-fatigue lives, crack initiation and propagation processes were observed by digital micro-scope and replica method. A series of elastic Finite Element Analysis were carried out and number of cycles to failure was predicted by several creep-fatigue damage evaluation methods. Then these results were compared with test results. Four types of evaluation methods which are stress reduction locus method, simple elastic-follow up method, the method using conventional Neuber's rule and the methods described in JSME FBR design code were applied. In addition that, experimental based estimation were also compared.