検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 137 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Optimization of dissolved hydrogen concentration for mitigating corrosive conditions of pressurised water reactor primary coolant under irradiation, 2; Evaluation of electrochemical corrosion potential

端 邦樹; 塙 悟史; 知見 康弘; 内田 俊介; Lister, D. H.*

Journal of Nuclear Science and Technology, 60(8), p.867 - 880, 2023/08

 被引用回数:2 パーセンタイル:56.43(Nuclear Science & Technology)

PWR一次冷却水中の腐食環境評価の1つの主要な目的は、主な構造材への悪影響を抑えつつ、PWRにおける一次冷却材応力腐食割れ(PWSCC)を抑制するための最適水素濃度を決定することにある。この目的に資するため、本研究ではラジオリシス解析と腐食電位(ECP)解析を併用したECP評価手法を提案した。前報では、ラジオリシス解析結果について報告した。この結果を踏まえて本報ではECP解析結果を報告する。ECP解析は混成電位モデルと酸化物層成長モデルを組み合わせたものであり、元々BWR用に開発したものである。本研究ではこれにLi$$^{+}$$とH$$^{+}$$のアノード分極曲線への影響を取り入れ、PWR用に拡張した。解析結果を過去のINCAインパイルループでの実験結果やその他の実験結果と比較し、本解析により$$pm$$100mVの誤差でECPを再現可能であることを示した。

論文

Constraint effect on fracture behavior of underclad crack in reactor pressure vessel

下平 昌樹; 飛田 徹; 高見澤 悠; 勝山 仁哉; 塙 悟史

Journal of Pressure Vessel Technology, 144(1), p.011304_1 - 011304_7, 2022/02

 被引用回数:0 パーセンタイル:0(Engineering, Mechanical)

JEAC4206-2016における原子炉圧力容器の構造健全性評価では、材料の破壊靭性が、想定欠陥であるクラッド下半楕円亀裂の先端における応力拡大係数よりも高いことが求められている。しかしながら、破壊靭性試験片と想定亀裂の亀裂深さやクラッドの有無といった違いにより、塑性拘束状態や破壊靭性評価に影響を及ぼす可能性がある。本研究では、クラッド下亀裂が破壊靭性評価に及ぼす影響を調べるため、3点曲げ破壊靭性試験及び有限要素解析を実施した。その結果、クラッド下亀裂の塑性拘束が表面亀裂のそれに比べて弱いことを解析によって示した。さらに、クラッド下亀裂の弱い塑性拘束の影響により、クラッド下亀裂の破壊靭性が表面亀裂よりも見かけ上高くなることを実験及びローカルアプローチによって明らかにした。

論文

Development of an analysis method for electrochemical corrosion potential in PWR primary coolant under irradiation

端 邦樹; 内田 俊介; 塙 悟史; 知見 康弘

Proceedings of International Symposium on Contribution of Materials Investigations and Operating Experience to LWRs' Safety, Performance and Reliability (Fontevraud 10) (Internet), 11 Pages, 2022/00

Stress Corrosion Cracking (SCC) is one of the key phenomena to determine material degradation in nuclear power plants, and the electrochemical potential (ECP) is known as an environmental factor of SCC initiation and propagation. In the PWR primary coolant, the low ECP level is maintained due to H$$_{2}$$ injection. On the other hand, material degradation attributed to H$$_{2}$$ attack was also reported. Thus, the optimization of H$$_{2}$$ concentration has been still discussed. In JAEA, an ECP analysis method has been developed. This method was originally prepared for BWR primary coolant, but it is improved to apply to PWR primary coolant. In the recent study, this ECP analysis method was modified by introducing pH adjustment based on boron-lithium combined control, and ECP calculation for stainless steels and Ni-based alloys were carried out. ECP calculation assuming a reactor core region and a steam generator region was also tried and the optimal hydrogen concentration without any serious adverse effect was discussed.

論文

Constraint effect on fracture mechanics evaluation for an under-clad crack in a reactor pressure vessel steel

下平 昌樹; 飛田 徹; 高見澤 悠; 勝山 仁哉; 塙 悟史

Proceedings of ASME 2020 Pressure Vessels and Piping Conference (PVP 2020) (Internet), 7 Pages, 2020/08

JEAC4206「原子炉圧力容器に対する供用期間中の破壊靭性の確認方法」では、加圧熱衝撃事象時の原子炉圧力容器(RPV)の健全性評価において、原子炉圧力容器内面のステンレスオーバーレイクラッド(クラッド)下亀裂(UCC)を想定し、亀裂先端の応力拡大係数がRPV鋼の破壊靭性値を上回らないことを定めている。本研究では、クラッドの存在が破壊靭性値に与える影響を評価することを目的に、UCCまたは表面亀裂を有する試験体を用いた3点曲げ破壊靭性試験と有限要素解析(FEA)を行い、UCCに対する塑性拘束効果の影響を調べた。その結果、UCCの破壊靭性値が表面亀裂に比べて高いことを実験的に示した。また、有限要素解析により、クラッドの存在によりUCCの塑性拘束効果が弱められることを示した。

論文

Ion-induced irradiation hardening of the weld heat-affected zone in low alloy steel

河 侑成; 高見澤 悠; 勝山 仁哉; 塙 悟史; 西山 裕孝

Nuclear Instruments and Methods in Physics Research B, 461, p.276 - 282, 2019/12

 被引用回数:3 パーセンタイル:33.05(Instruments & Instrumentation)

The microstructural distribution in the heat-affected zone (HAZ) under the stainless overlay cladding of low alloy steel was investigated by metallurgical observation and finite element analysis (FEA). The distribution of the coarse-grain (CG) HAZ and the fine-grain (FG) HAZ in low alloy steel by metallurgical observation agreed well with the FEA results. Base metal contained mixed bainite with ferrite, whereas the CGHAZ and the FGHAZ contained mixed lower bainite with martensite and mixed upper bainite with ferrite, respectively. Ferrite fraction in FGHAZ was higher than those other areas. After ion irradiation at a fluence of 0.5 dpa, irradiation hardening and the formation of solute clusters were observed at the base metal, FGHAZ, and the CGHAZ. Atom probe tomography analysis revealed that irradiation hardening increased with increasing volume fraction of clusters, although irradiation hardening at the FGHAZ was greater than that at the CGHAZ, which contained more clusters than the FGHAZ. This difference in irradiation hardening may be due to the differences in the amount of ferrite, carbide precipitates and so on in the different microstructures.

論文

原子炉圧力容器鋼の照射硬化メカニズム究明; 照射温度制御実験

河 侑成; 下平 昌樹; 飛田 徹; 塙 悟史; 山崎 翔太*; 宇野 定則*

2018年度量子科学技術研究開発機構施設共用実施報告書(インターネット), 3 Pages, 2019/09

原子炉圧力容器の母材の内表面から約10mm深さの範囲に生じるステンレスオーバーレイクラッド下溶接熱影響部の照射脆化感受性を調査するための電子線照射試験の準備として、原子炉圧力容器鋼の実機環境相当である290$$^{circ}$$Cを目標とした照射温度の制御実験を実施した。冷却装置や試料固定治具の製作等を行い、電子線照射時の電流値による試料の発熱と熱伝導による冷却のバランスを調整し、照射温度を290$$^{circ}$$Cに制御する条件を調べた。その結果、適切な厚さのステンレススペーサーの使用により、290.6$$^{circ}$$C$$pm$$4.7$$^{circ}$$C範囲で照射温度を制御できることを確認した。

論文

Preliminary verification of water radiolysis and ECP calculation models by in-pile ECP measurements

塙 悟史; 端 邦樹; 知見 康弘; 笠原 茂樹

Proceedings of 21st International Conference on Water Chemistry in Nuclear Reactor Systems (Internet), 12 Pages, 2019/09

Water radiolysis and ECP calculations models were preliminary verified using in-pile ECP and related measurement data obtained under BWR and PWR simulated conditions. Two separate anodic polarization curves were supposed in ECP calculations in order to deal with the material surface condition changed by water chemistry, and the measured ECP under BWR simulated conditions were well explained by the calculations. ECP calculations under PWR simulated conditions were also carried out supposing the other polarization curve applicable to the temperature range of 593 K and good agreement between the measurement and the calculations was obtained.

論文

ステンレス鋼の亀裂先端における高温水中酸化に及ぼす荷重付与の影響

笠原 茂樹; 知見 康弘; 端 邦樹; 塙 悟史

材料と環境, 68(9), p.240 - 247, 2019/09

ステンレス鋼のBWR一次系水中環境助長割れ機構検討の一環として、荷重を付与したCT試験片を290$$^{circ}$$Cの高温水に浸漬し、疲労予亀裂先端近傍の酸化物を観察した。酸化物内層は、Fe, Ni, Crを含むスピネル構造の微細粒、外層はFe$$_{3}$$O$$_{4}$$の結晶粒であった。FEM解析によるCT試験片亀裂先端の応力、ひずみ分布との比較より、塑性変形に伴う転位と弾性ひずみの重畳によって酸化物内層の形成が促進されることが示唆された。

論文

Improvement of plant reliability based on combining of prediction and inspection of crack growth due to intergranular stress corrosion cracking

内田 俊介; 知見 康弘; 笠原 茂樹; 塙 悟史; 岡田 英俊*; 内藤 正則*; 小嶋 正義*; 木倉 宏成*; Lister, D. H.*

Nuclear Engineering and Design, 341, p.112 - 123, 2019/01

 被引用回数:5 パーセンタイル:49.54(Nuclear Science & Technology)

原子力プラントでは、リスク基準保全(RBM)にサポートされた信頼性基準保全(RCM)に基づくプラント信頼性向上策が採用されつつある。RBMは主要な材料に生じつつある欠陥をその進展過程で予測し、検査、保全を最適に組合せて実施されるものである。プラント全体にわたり、IGSCCを早期検出することにより、水化学制御などの適切な対応策の適用が可能となる。腐食環境とき裂進展の予測を組合せ、IGSCC決定因子である腐食電位、材料のSCC感受性、残留応力の不確実さが余寿命予測に及ぼす影響を定量的に評価した。結論として、(1)予測による重点検査箇所の効率的な選定、(2)検査による予測精度の向上、を結合させることによりプラントの信頼性向上に貢献できることを示した。

論文

Influence of Zn injection on PWSCC crack growth rates and oxide film properties of Alloy 600

知見 康弘; 佐藤 賢二*; 笠原 茂樹; 梅原 隆司*; 塙 悟史

Proceedings of Contribution of Materials Investigations and Operating Experience to Light Water NPPs' Safety, Performance and Reliability (FONTEVRAUD-9) (Internet), 10 Pages, 2018/09

一次系冷却水中での応力腐食割れ(PWSCC)進展挙動への亜鉛注入の影響を調べるため、加圧水型軽水炉(PWR)一次系水模擬環境での10%冷間加工600合金の亀裂進展試験を、320$$^{circ}$$C、低濃度(5$$sim$$10ppb)の亜鉛注入、溶存水素濃度(DH)5, 30、及び50cc/kgH$$_{2}$$Oの条件下で実施した。その結果、亀裂進展速度のDH依存性が亜鉛注入なしの試験データに基づく亀裂進展速度の予測値と同様の傾向を示し、実機環境を模擬した低濃度亜鉛注入が亀裂進展挙動に及ぼす影響はほとんど見られなかった。そこで、亀裂進展試験後の試験片の亀裂内及び表面に生成した酸化皮膜の微細組織分析を実施したところ、試験片表面の酸化皮膜からは亜鉛が検出されたが、亀裂内に生成した酸化皮膜からは亜鉛が検出されなかった。このことから、亀裂先端部の酸化皮膜への亜鉛の取り込みがないことが亀裂進展挙動への亜鉛注入の影響が見られない原因であることがわかった。

論文

Fracture toughness evaluation of heat-affected zone under weld overlay cladding in reactor pressure vessel steel

河 侑成; 飛田 徹; 高見澤 悠; 塙 悟史; 西山 裕孝

Proceedings of 2018 ASME Pressure Vessels and Piping Conference (PVP 2018), 6 Pages, 2018/07

An evaluation of the fracture toughness of the heat-affected zone (HAZ), which is located under the weld overlay cladding of a reactor pressure vessel (RPV), was performed. Considering inhomogeneous microstructures of the HAZ, 0.4T-C(T) specimens were manufactured from the cladding strips locations, and Mini-C(T) specimens were fabricated from the distanced location as well as under the cladding. The reference temperature (T$$_{o}$$) values of HAZ for both 0.4T-C(T) and Mini-C(T) specimens were significantly lower than that of the base metal at a quarter thickness by 40$$^{circ}$$C$$sim$$60$$^{circ}$$C. Compared to the literature data that indicated fracture toughness at the surface without overlay cladding and base metal of a quarter thickness in a pressure vessel plate, this study concluded that the welding thermal history showed no significant effect on the fracture toughness of the inner surface of RPV steel.

報告書

原子炉圧力容器鋼における高温予荷重(WPS)効果確認試験(受託研究)

知見 康弘; 岩田 景子; 飛田 徹; 大津 拓与; 高見澤 悠; 吉本 賢太郎*; 村上 毅*; 塙 悟史; 西山 裕孝

JAEA-Research 2017-018, 122 Pages, 2018/03

JAEA-Research-2017-018.pdf:44.03MB

原子炉圧力容器の加圧熱衝撃(Pressurized Thermal Shock: PTS)事象に対する構造健全性評価に与える影響項目の一つである高温予荷重(Warm Pre-stress: WPS)効果は、高温時に予め荷重を受けた場合に、冷却中の荷重減少過程では破壊が生じず、低温での再負荷時の破壊靱性が見かけ上増加する現象である。WPS効果については、主として弾性データによって再負荷時の見かけの破壊靱性を予測するための工学的評価モデルが提案されているが、試験片の寸法効果や表面亀裂に対して必要となる弾塑性評価は考慮されていない。本研究では、実機におけるPTS時の過渡事象を模擬した荷重-温度履歴を与える試験(WPS効果確認試験)を行い、WPS効果に対する試験片寸法や荷重-温度履歴の影響を確認するとともに、工学的評価モデルの検証を行った。再負荷時の見かけの破壊靭性について、予荷重時の塑性の程度が高くなると試験結果は工学的評価モデルによる予測結果を下回る傾向が見られた。比較的高い予荷重条件に対しては、塑性成分等を考慮することにより工学的評価モデルの高精度化が可能となる見通しが得られた。

論文

X線吸収を用いた原子炉圧力容器鋼溶接熱影響部の微細構造分析

岩田 景子; 高見澤 悠; 河 侑成; 岡本 芳浩; 下山 巖; 本田 充紀; 塙 悟史; 西山 裕孝

Photon Factory Activity Report 2017, 2 Pages, 2018/00

原子炉圧力容器内表面のステンレスオーバーレイクラッド直下に生じる溶接熱影響部(HAZ)は熱履歴により結晶粒径や析出物分布の異なる組織が複雑に分布し、母材とは機械的特性が異なることが知られている。本研究では、HAZ組織の特徴を調べるため炭化物分布に着目し、形成元素の一つであるMoの周辺微細構造について分析を行った。HAZ組織の狭い領域毎の構造情報を取得するため、キャピラリレンズを使用した広域X線吸収微細構造(EXAFS)により$$mu$$mオーダーの領域測定を実施した。EXAFS結果からHAZ内で生成が確認されている炭化物種の一つであるMo$$_{2}$$Cは粒径の小さい領域に比較的多く分布することが示唆された。

論文

An Empirical model for the corrosion of stainless steel in BWR primary coolant

内田 俊介*; 塙 悟史; 内藤 正則*; 岡田 英俊*; Lister, D. H.*

Corrosion Engineering, Science and Technology, 52(8), p.587 - 595, 2017/10

 被引用回数:4 パーセンタイル:21.61(Materials Science, Multidisciplinary)

電気化学に対する静的解析と酸化皮膜成長に対する動的解析を組み合わせたECP評価モデルを開発した。このモデルで得られた主な結論は以下の通り。過酸化水素及び酸素のECPへの影響は、酸化皮膜の性状変化によるものとして説明できた。水化学条件の変更に起因するECPのヒステリシスを評価することができた。ECPに対する中性子照射効果として、酸化皮膜中の照射誘起拡散をモデルに導入することで、中性子照射によるアノード電流密度の低下に起因したECPの低下を予測した。

論文

Radiolysis of mixed solutions of Cl$$^{-}$$ and Br$$^{-}$$ and its effect on corrosion of a low-alloy steel

端 邦樹; 井上 博之*; 小嶋 崇夫*; 笠原 茂樹; 塙 悟史; 上野 文義; 塚田 隆; 岩瀬 彰宏*

Proceedings of Symposium on Water Chemistry and Corrosion in Nuclear Power Plants in Asia 2017 (AWC 2017) (USB Flash Drive), p.304 - 314, 2017/09

NaClとNaBrの混合水溶液についてラジオリシス計算を実施し、過酸化水素生成量についてこれまでの$$gamma$$線照射実験結果との比較を行った。計算結果は実験結果をほぼ再現したが、高純度NaCl水溶液に対しては酸性条件で過小評価される傾向にあった。各化学反応に対する感度解析を実施したところ、塩化物イオン(Cl$$^{-}$$)とOHラジカル($$^{.}$$OH)との反応の初期の3反応(Cl$$^{-}$$ + $$^{.}$$OH $$rightarrow$$ ClOH$$^{.-}$$、ClOH$$^{.-}$$ $$rightarrow$$ Cl$$^{-}$$ + $$^{.}$$OH、ClOH$$^{.-}$$ + H$$^{+}$$ $$rightarrow$$ Cl$$^{.}$$ + H$$_{2}$$O)の速度定数の変化によって過酸化水素量は大きく変化した。本結果はこれらの化学反応の速度定数の正確な評価が海水のようなNaClを含む水溶液のラジオリシス計算の信頼性向上に重要であることを示している。さらに低合金鋼SQV2Aを用いた$$gamma$$線照射下浸漬試験も実施し、NaClやNaBrが鋼材の照射下腐食に与える影響について調べた。基本的には腐食速度の変化は過酸化水素発生量の変化に追随したが、アルカリ性条件ではpH11付近で腐食速度が極大値をとり、12以上では高い過酸化水素濃度であるのに腐食がほとんど進行しなくなった。これは不働態皮膜が形成しているためであると考えられた。

論文

A Modelling study on water radiolysis for primary coolant in PWR

向井 悟*; 梅原 隆司*; 塙 悟史; 笠原 茂樹; 西山 裕孝

Proceedings of 20th International Conference on Water Chemistry of Nuclear Reactor Systems (NPC 2016) (USB Flash Drive), 9 Pages, 2016/10

日本のPWRでは、水の放射線分解抑制のために、一次冷却材中の溶存水素濃度は25$$sim$$35cc/kg-H$$_{2}$$Oの範囲に制御されている。しかし、日本では被ばく低減の観点から、溶存水素濃度の低下を目指している。そこで、溶存水素濃度を低下したときの一次冷却材中の放射線分解生成物の濃度について、$$gamma$$線,高速中性子、及び$$^{10}$$B(n,$$alpha$$)$$^{7}$$Li反応によるアルファ線を考慮した放射線分解モデルにより評価した。その結果、溶存水素濃度が5cc/kg-H$$_{2}$$Oに低下しても放射線分解が抑制されることが示された。異なるG値と主要反応の速度定数がH$$_{2}$$O$$_{2}$$とO$$_{2}$$の濃度に及ぼす影響を水素注入条件下で調べるとともに、ホウ酸水中でのアルファ線による放射線分解の影響にも注目した。

論文

Evaluation of ECP measured in in-pile environment

塙 悟史; 内田 俊介; 端 邦樹; 知見 康弘; 笠原 茂樹*; 西山 裕孝

Proceedings of 20th Nuclear Plant Chemistry International Conference (NPC 2016) (USB Flash Drive), 11 Pages, 2016/10

腐食電位(ECP)は、金属表面に形成される酸化被膜の性状で変化するため、ECPを解析的に評価する際の取扱が課題である。現在、周囲の水環境に応じた酸化被膜性状変化を計算し皮膜の電気的抵抗変化として取り扱う方法、水環境に応じた異なるアノード分極曲線を扱う方法の二つが提案されている。本研究では、後者の取扱をしたECP計算プログラムを構築し、試験炉であるハルデン炉で取得された照射環境下におけるECP測定データで検証した。その結果、水の放射線分解で発生する酸素及び過酸化水素が混在する照射環境下においても、構築したECP計算プログラムが適用できることを確認した。

論文

Study of irradiation effect on ECP using in-pile loops in the JMTR

塙 悟史; 内田 俊介; 端 邦樹; 知見 康弘; 笠原 茂樹*; 西山 裕孝

Proceedings of 20th Nuclear Plant Chemistry International Conference (NPC 2016) (USB Flash Drive), 10 Pages, 2016/10

腐食電位(ECP)評価における放射線の影響は理論的には想定されるが具体的な検証は行われていない。われわれは、酸化皮膜への中性子照射効果を取り入れたECP解析コードを開発し、中性子の照射により酸化皮膜の電気的抵抗が低下すること、それによりECPが低下すること、ECP低下の程度は中性子線束に依存することを解析的に示した。材料試験炉(JMTR)は、照射環境下での水化学試験に適した照射ループを有していることから、JMTRで照射した場合のECPへの照射影響を解析で予測した。その結果、JMTRの照射ループを用いれば、ECPへの照射影響は十分に捉えられることを確認した。

論文

Simulation for radiolytic products of seawater; Effects of seawater constituents, dilution rate, and dose rate

端 邦樹; 佐藤 智徳; 本岡 隆文; 上野 文義; 塙 悟史; 笠原 茂樹; 塚田 隆

Journal of Nuclear Science and Technology, 53(8), p.1183 - 1191, 2016/08

 被引用回数:6 パーセンタイル:49.65(Nuclear Science & Technology)

Radiolysis calculations of simulated seawater were conducted using reported data on chemical yields and chemical reaction sets to predict the effects of seawater constituents on water radiolysis. Hydrogen, oxygen, and hydrogen peroxide were continuously produced from simulated seawater during $$gamma$$-ray irradiation. The concentration of molecular hydrogen exceeded its saturation concentration before it reached the steady-state concentration. The production behavior of these molecules was significantly promoted by the addition of bromide ions because of the high reactivity of bromide anion with the hydroxyl radical, an effective hydrogen scavenger. It is also shown that the concentrations of these molecules were effectively suppressed at dilution levels of less than 1%.

論文

Hydrogen peroxide production by $$gamma$$ radiolysis of sodium chloride solutions containing a small amount of bromide ion

端 邦樹; 井上 博之*; 小嶋 崇夫*; 岩瀬 彰宏*; 笠原 茂樹; 塙 悟史; 上野 文義; 塚田 隆

Nuclear Technology, 193(3), p.434 - 443, 2016/03

 被引用回数:12 パーセンタイル:77.36(Nuclear Science & Technology)

$$gamma$$ radiolysis experiments of solutions, which consisted of a mixture of NaCl and NaBr, were conducted to confirm the validity of radiolysis calculations of seawater simulated solutions and to determine the importance of Br$$^{-}$$ in the production of H$$_{2}$$O$$_{2}$$ via water radiolysis. The steady-state concentration of H$$_{2}$$O$$_{2}$$ in each solution was measured after irradiation and compared to that obtained by radiolysis calculations. It was found that the calculated and experimental results were in good agreement. The concentration of H$$_{2}$$O$$_{2}$$ in the 0.6 M NaCl solution increased approximately three times by the addition of 1 mM NaBr. The result showed that Br$$^{-}$$ plays an important role in the production of H$$_{2}$$O$$_{2}$$ by water radiolysis, presumably due to the reactions of Br$$^{-}$$ with hydroxyl radical. The H$$_{2}$$O$$_{2}$$ production of 1 mM NaCl solutions increased when the pH was either higher or lower than 8. It was considered that hydrated electron also plays an important role in H$$_{2}$$O$$_{2}$$ production in these acidic and alkaline conditions.

137 件中 1件目~20件目を表示