検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 139 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

報告書

軽イオンマイクロビーム分析/加工システムの改良

江夏 昌志; 石井 保行; 山田 尚人; 大久保 猛; 加田 渉*; 喜多村 茜; 岩田 吉弘*; 神谷 富裕; 佐藤 隆博

JAEA-Technology 2016-006, 41 Pages, 2016/03

JAEA-Technology-2016-006.pdf:14.03MB

日本原子力研究開発機構原子力科学研究部門高崎量子応用研究所のイオン照射研究施設では、これまでに、3MVシングルエンド加速器におけるMeV級軽イオンマイクロビームによる高空間分解能な局所元素分析・加工システムの開発を行ってきた。ここでは、加速器、ビーム輸送ライン及びマイクロビーム形成装置などの主構成機器に加えて、マイクロPIXE/PIGE(Particle Induced X-ray/Gamma-ray Emission)分析、三次元元素分布分析(PIXE-CT: Computed Tomography)、イオン誘起発光分析(IBIL: Ion Beam Induced Luminescence)及び微細加工(PBW: Proton Beam Writing)への応用研究に用いるための付帯装置・治具類に関する技術的な改良について、これらの機器・装置等の概要とともに纏める。

論文

Particle induced X-ray emission-computed tomography analysis of an adsorbent for extraction chromatography

佐藤 隆博; 横山 彰人; 喜多村 茜; 大久保 猛; 石井 保行; 高畠 容子; 渡部 創; 駒 義和; 加田 渉*

Nuclear Instruments and Methods in Physics Research B, 371, p.419 - 423, 2016/03

 被引用回数:7 パーセンタイル:55.37(Instruments & Instrumentation)

The cross-sectional distribution of neodymium (Nd) simulating minor actinides (MA) in a minute globular adsorbent of less than 50 $$mu$$m in diameter was measured using PIXE (particle induced X-ray emission)-CT (computed tomography) with a 3-MeV proton microbeam for the investigation of residual MA in extraction chromatography of spent fast reactor fuel. The measurement area was 100 $$times$$ 100 $$mu$$m$$^2$$ corresponding to 128 $$times$$ 128 pixels of projection images. The adsorbent target was placed on an automatic rotation stage with 9$$^{circ}$$ step. Forty projections of the adsorbent were finally measured, and image reconstruction was carried out by the modified ML-EM (maximum likelihood expectation maximization) method. As a result, the cross-sectional distribution of Nd in the adsorbent was successfully observed, and it was first revealed that Nd remained in the region corresponding to internal cavities of the adsorbent even after an elution process. This fact implies that the internal structure of the adsorbent must be modified for the improvement of the recovery rate of MA.

論文

TIARA静電加速器の現状

薄井 絢; 千葉 敦也; 山田 圭介; 横山 彰人; 北野 敏彦*; 高山 輝充*; 織茂 貴雄*; 金井 信二*; 青木 勇希*; 橋爪 将司*; et al.

第28回タンデム加速器及びその周辺技術の研究会報告集, p.117 - 119, 2015/12

原子力機構高崎量子応用研究所のイオン照射施設(TIARA)の3MVタンデム加速器、400kVイオン注入装置、3MVシングルエンド加速器の平成26年度における運転と整備の状況を報告する。シングルエンド加速器は、昇圧系トラブルによる2日間の研究利用運転の中止があったが、他の2台は、平成26年度に続き100%の稼働率を維持した。また、タンデム加速器はCoイオン(~12MeV, 3価)を新たに利用可能イオン種に加えた。タンデム加速器では、ターミナルの電圧安定度が極端に低下(1E-4以下)する現象について対策を講じた。加速電圧は、高電圧ターミナルの電圧測定値と電圧設定値の差分をもとに、ターミナルに蓄積される電荷量を制御することで安定に保たれる。電圧安定度の低下は、加速器のグランドベース(フレーム)から電源アースやCAMAC電源筐体を経由して電圧設定値の信号に誘導される100Hzの電源高調波ノイズが原因であると分かった。そこで、絶縁シートを用いて電源筐体とフレームの電気的絶縁及び電源アースの切り離しを試みた。その結果、電圧設定値の信号に誘導されていた100Hzのノイズが減少し、電圧安定度は2E-5程度に回復した。

論文

原子力機構TIARA施設の現状

湯山 貴裕; 石堀 郁夫; 倉島 俊; 吉田 健一; 石坂 知久; 千葉 敦也; 山田 圭介; 横山 彰人; 薄井 絢; 宮脇 信正; et al.

Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.302 - 304, 2015/09

日本原子力研究開発機構のイオン照射施設TIARAでは4台の加速器により、材料・バイオ技術の研究開発への利用を主として、広範囲のエネルギー及び多様なイオン種のビームを提供している。本発表では2014年度のTIARAの稼働状況、保守・整備及び技術開発を報告する。保守・整備及び技術開発の主要な内容を以下に示す。サイクロトロンの高周波系において、ショート板用接触子に焼損が発生したため、接触子の交換及び焼損箇所の研磨を行うことで復旧させた。原因調査の結果、経年劣化によりフィードバックケーブルが断線しかかっていたため、不必要な高電圧が印加されたことが原因と判明した。サイクロトロン制御システムに関して、サポートが停止されたWindows XPをWindows 7に変更し、これに伴い制御システムを更新するとともに、トレンドグラフのログデータ保存機能、操作画面上の制御対象一括選択機能の付加など、各種機能を向上させた。C$$_{60}$$イオンビームの計測に関して、複雑な二次荷電粒子を生成するC$$_{60}$$イオンビームの正確な電流測定のために、サプレッサー電極の構造を改良することで二次荷電粒子を十分捕集するファラデーカップを開発した。

論文

Beam size reduction of a several hundred-keV compact ion microbeam system by improving the extraction condition in an ion source

石井 保行; 大久保 猛; 神谷 富裕; 齋藤 勇一

Nuclear Instruments and Methods in Physics Research B, 348, p.79 - 82, 2015/04

 被引用回数:2 パーセンタイル:17.75(Instruments & Instrumentation)

A hundreds-keV compact ion microbeam system with a three-stage acceleration lens is under development to form an ion beam of several micrometers in diameter. A proton beam of 17$$mu$$m in diameter was formed in the previous study and the smaller beam size could be expected at the lower pressure. In this study, the vacuum system at the extraction space was improved and the relation between the beam size and vacuum pressure was examined by forming hydrogen ion beams at 130 keV. As a result, the beam size of 5.8 $$mu$$m which almost satisfied our present goal was obtained at the achievably lowest pressure (5$$times$$10$$^{-4}$$ Pa).

論文

TIARA静電加速器の現状

薄井 絢; 宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 北野 敏彦*; 高山 輝充*; 織茂 貴雄*; 金井 信二*; 青木 勇希*; et al.

第27回タンデム加速器及びその周辺技術の研究会報告集, p.118 - 121, 2015/03

平成25年度の原子力機構高崎量子応用研究所のイオン照射研究施設(TIARA)の3MVタンデム加速器、400kVイオン注入装置、3MVシングルエンド加速器はマシントラブルによる実験の中止がなく、年間運転計画に対する稼働率は100%であった。年度末に補正予算を用いて老朽化した装置の更新を行うため、2月末までに土曜日を利用するなど、年間運転計画を前倒しすることで年度当初に計画した研究利用時間を確保した。各加速器の運転時間は、それぞれ例年並みの2,062時間, 2,320時間, 1,866時間であった。また、タンデム加速器は10月に総運転時間40,000時間を達成した。タンデム加速器では、断続的にターミナルの電圧安定度が極端に低下する現象が起こっている。その原因は、GVMアンプ, CPOアンプ及びターミナルポテンシャルスタビライザ(TPS)等のフィードバック制御に関わる機器の異常ではなく、TPSに入力信号に生じる50$$sim$$100Hzの周期的な電圧変動にあることが判明した。この電圧変動は建屋や周辺機器からのノイズによるものではなかったため、他の原因と考えられるCAMAC電源の電圧変動との関係を今後調査する。

論文

Note: Proton microbeam formation with continuously variable kinetic energy using a compact system for three-dimensional proton beam writing

大久保 猛; 石井 保行

Review of Scientific Instruments, 86(3), p.036102_1 - 036102_3, 2015/03

 被引用回数:2 パーセンタイル:10.25(Instruments & Instrumentation)

A compact focused gaseous ion beam system (gas-FIB) is under development to form proton microbeams of a few hundreds of keV. An experiment to form proton beams was carried out to show the gas-FIB had feasibility for 3D proton beam writing (3D-PBW) with a size and a position of a microbeam independent of energy. Proton microbeams with an approximately 6 $$mu$$m diameter were formed at the same position over an energy range of 100-140 keV when a ratio of the kinetic energy of the object side to that of the image side was kept constant. In addition, these characteristics of the system were also numerically demonstrated in an energy range of 100-1000 keV. Those results show that the 1 MeV system will enable 3D-PBW with variable penetration depth in a sample by varying the kinetic energy.

論文

Construction of a 300-keV compact ion microbeam system with a three-stage acceleration lens

石井 保行; 大久保 猛; 小嶋 拓治; 神谷 富裕

Nuclear Instruments and Methods in Physics Research B, 332, p.156 - 159, 2014/08

 被引用回数:7 パーセンタイル:48.56(Instruments & Instrumentation)

A 300-keV compact ion microbeam system has been constructed to form a submicron ion microbeam. This system consists of a gas-ion source and a three-stage acceleration lens. Since the three-stage acceleration lens was designed to play two roles of acceleration and focusing for ion beam simultaneously, no focusing devices such as focusing lens and beam line are needed outside of the system. Therefore, the system is downsized to about 1 m high and can be placed in a small experimental room. The beam sizes formed by the system were experimentally measured by changing the voltages of the third acceleration lens in the three-stage acceleration lens within the range of 150 keV. These beam sizes were also theoretically calculated using Munro code. The experimentally obtained value was almost same of the theoretically estimated value. It demonstrated that the three-stage acceleration lens effectively worked on the focusing lens as designed.

論文

Status report on technical developments of electrostatic accelerators

山田 圭介; 齋藤 勇一; 石井 保行; 的場 史朗; 千葉 敦也; 横山 彰人; 薄井 絢; 佐藤 隆博; 大久保 猛; 宇野 定則

JAEA-Review 2013-059, JAEA Takasaki Annual Report 2012, P. 159, 2014/03

TIARA静電加速器において平成24年度に行った技術開発の成果を報告する。タンデム加速器ではクラスターイオン用荷電変換ガスの探索のために、0.24V$$_{B}$$-0.34$$_{B}$$(V$$_{B}$$: Borh velocity)のエネルギー範囲でAuクラスターイオンとHe及びN$$_{2}$$ガスとの衝突によるクラスターイオンの解離断面積を評価した。その結果、解離断面積は実験の範囲ではエネルギー依存性がなく、クラスターサイズ及びガスの種類に依存することがわかった。シングルエンド加速器では、平成23年度までに開発したエミッタンス測定装置を用いて、RFイオン源の引出電圧とエミッタンスの関係を測定した。その結果、1MeVプロトンビームでは、引出電圧が8.4kVのときに最も良いエミッタンスが得られることがわかった。イオン注入装置では、クラスターイオン用ファラデーカップ(FC)の小型化のため、底面に針を敷き詰めることで等価的にアスペクト比を高くしたFCを試作した。本FCを用いてフラーレンイオンの電流測定試験を行った結果、高いアスペクト比を有するFCと同等の測定値が得られたことから、本手法がクラスターイオン用FCの小型化に有用であることがわかった。

論文

Operation of electrostatic accelerators

宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 薄井 絢; 齋藤 勇一; 石井 保行; 佐藤 隆博; 大久保 猛; 奈良 孝幸; et al.

JAEA-Review 2013-059, JAEA Takasaki Annual Report 2012, P. 179, 2014/03

平成24年度の3台の静電加速器は、ユーザのキャンセルを除きほぼ年間計画に沿って運転された。運転日数はタンデム加速器で171日、イオン注入装置で149日、シングルエンド加速器で168日であり、年間の運転時間は各々2,073時間, 1,847時間, 2,389時間で例年と同水準の運転時間であった。平成21年度から新たに創設され、実施機関として採択された文部科学省補助事業の「先端研究施設共用促進事業」では、11日の利用があった。タンデム加速器では故障による停止はなかったが、イオン注入装置ではイオンの生成不良で1日、シングルエンド加速器ではタンク内のイオン源ガス流量調整バルブの故障により4日停止した。イオン注入装置では、高速クラスターイオン研究開発グループからの要望で水素化ヘリウム(HeH)の分子イオンの生成試験を実施し、ビーム強度は200kVで50nAであった。タンデム加速器では、核融合炉構造材料開発グループからの要望でタングステン(W)イオンの加速試験を行い、15MeV、4価で20nAのビームが得られた。

論文

TIARA静電加速器の現状

宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 薄井 絢; 北野 敏彦*; 高山 輝充*; 織茂 貴雄*; 金井 信二*; 青木 勇希*; et al.

第26回タンデム加速器及びその周辺技術の研究会報告集, p.79 - 81, 2013/07

2012年度のTIARAの3台の静電加速器は、ユーザーによるキャンセルを除き予定した研究利用日数の運転を行った。この年の年間運転時間は例年と同じ水準であり、3MVタンデム加速器で2,073時間、400kVイオン注入装置で1,847時間, 3MVシングルエンド加速器で2,389時間であった。タンデム加速器では故障はなかったが、イオン注入装置ではイオンの生成不良、シングルエンド加速器ではイオン源ガス流量調整弁の故障により、それぞれ1日と4日停止した。故障により中断した実験については調整日に補てんした。イオン注入装置では利用者からの要望により、フリーマンイオン源で水素化ヘリウムの分子イオンビームを生成した。この結果、200kV, 50nAのビーム強度で、研究利用への提供を開始した。

論文

Micromachining of commodity plastics by proton beam writing and fabrication of spatial resolution test-chart for neutron radiography

酒井 卓郎; 安田 良; 飯倉 寛; 野島 健大; 松林 政仁; 加田 渉; 江夏 昌志; 佐藤 隆博; 大久保 猛; 石井 保行; et al.

Nuclear Instruments and Methods in Physics Research B, 306, p.299 - 301, 2013/07

 被引用回数:7 パーセンタイル:49.41(Instruments & Instrumentation)

Proton Beam Writing (PBW) is a direct-write technique for producing high-aspect-ratio micro- and nano-structures in resist material. This technique is a promising method for micromachining of commodity plastics such as acrylic resin. In this paper, we introduce fabrication of microscopic devices made of a relatively thick ($$sim$$75 $$mu$$m) acrylic sheet. An optimization of the fluence of 3 MeV proton beam to induce the chain scission in the sheet was performed at Takasaki Advanced Radiation Research Institute, JAEA. A software program that converts image pixels into coordinates data has been developed, and a fine jigsaw puzzle was fabricated on the sheet. The piece size of jigsaw puzzle is 50 $$times$$ 50 $$mu$$m. For practical use, A line and space test-chart for spatial resolution measurement on neutron radiography was also successfully created.

論文

Preliminary study on development of 300 kV compact focused gaseous ion beam system

大久保 猛; 石井 保行; 三宅 善信*; 神谷 富裕

AIP Conference Proceedings 1525, p.370 - 374, 2013/04

 被引用回数:4 パーセンタイル:83.66

Focused proton beam of several hundreds of keV with micrometer scale range become a powerful tool for high aspect ratio 3-Dimensional structures in proton lithography. A new 300 kV compact focused gaseous ion beam (gas-FIB) system with three-stage acceleration lens was constructed at JAEA. The preliminary experiments of formation of the focused gaseous ion beams were carried out to show the availability of the gas-FIB system as a writing tool for 3D proton lithography. As a result of the experiments, it was proved that the focal point was kept at the same position under changing the kinetic energy but with keeping the kinetic energy ratio constant, which was defined as the ratio of kinetic energy in object side to that in image side for the third acceleration lens. This characteristic of the gas-FIB is a good point to suggest the 3D proton lithography changing penetration depth in a sample by varying the beam energy.

論文

Development of beam generation and irradiation technology for electrostatic accelerators

山田 圭介; 千葉 敦也; 横山 彰人; 齋藤 勇一; 石井 保行; 佐藤 隆博; 大久保 猛; 宇野 定則

JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 155, 2013/01

TIARA静電加速器において平成23年度に行ったビーム発生及び照射技術開発の成果を報告する。タンデム加速器では、クラスターイオン用荷電変換ガスの探索のために、0.065-0.750MeV/atomの炭素クラスターイオンとHe, N$$_{2}$$,及びXeガスとの衝突によるクラスターイオンの解離断面積を評価した。その結果、解離断面積は実験の範囲ではエネルギー依存性がないことがわかった。また、用いたガスではHeの解離断面積が最も小さく、荷電変換ガスに適していることが示唆された。シングルエンド加速器では、既存のエミッタンスモニターに0.1mm径のCuワイヤーを用いて電流測定を行うことで、1MeV H$$^{+}$$ビームのエミッタンスを測定した。この結果、x方向の70%エミッタンスとして1.9mm・mradの値が得られた。イオン注入装置では、クラスターイオン実験の効率化のため、ビームラインの設計・増設・ビーム輸送試験を行った。この中で、振分電磁石の交換及びビームライン機器の取り付けを完了するとともに、ビーム輸送試験では目的のビーム電流の輸送に成功した。

論文

Operation of electrostatic accelerators

宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 齋藤 勇一; 石井 保行; 佐藤 隆博; 大久保 猛; 奈良 孝幸; 北野 敏彦*; et al.

JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 173, 2013/01

TIARAの3台の静電加速器では、2011年3月11日に発生した東北大地震の際に機械的損傷はなかった。しかし、その後の東京電力による計画停電の影響で4月下旬までは運転することができなかった。この1か月の実験時間の損失を補うために10日間の土曜日運転が追加された。その結果、年間運転時間は平年の水準を維持できた。タンデム加速器では、11.7MVでErイオンの新たな加速試験が行われ3価で20nAのビーム強度であった。イオン注入装置において利用者の要望により、2種類のフラーレンイオンによる連続生成・照射を混合試料法によってフリーマン型イオン源を交換することなく実現した。

論文

Mach-Zehnder polymer waveguides fabricated using proton beam writing

三浦 健太*; 佐藤 隆博; 石井 保行; 江夏 昌志; 桐生 弘武*; 小澤 優介*; 高野 勝昌*; 大久保 猛; 山崎 明義; 加田 渉; et al.

JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 126, 2013/01

In this study, a PMMA-based MZ waveguide was fabricated utilizing PBW to develop a thermo-optic switch. A 10-$$mu$$m-thick PMMA film was firstly spin-coated onto the 15 $$mu$$m SiO$$_2$$ film as the under cladding. Cores of a MZ waveguide with 8 $$mu$$m width were secondary drawn at the dose of 100 nC/mm$$^2$$ in the PMMA film using PBW with H$$^+$$ beam of the size of $$sim$$1.1 $$mu$$m and beam current of $$sim$$50 pA at 1.7 MeV. The MZ waveguide was drawn by symmetrically coupling two Y junctions and its branching angle was set to 2$$^circ$$ to reduce optical branching loss. Finally a 10-$$mu$$m-thick PMMA film was deposited again on the sample as an upper cladding by spin-coating. The mode-field diameter of near field patterns with about 10 $$mu$$m width was observed at $$lambda$$= 1.55 $$mu$$m on the basis of a fundamental mode without no higher-order modes which required to develop our objective MZ type thermo-optic switch for optical-fiber telecommunication. The result of the observation showed that the PMMA-based single-mode MZ waveguide for $$lambda$$= 1.55 $$mu$$m was successfully fabricated using PBW. As the next step to develop the optical switch, we will form a Ti thin-film heater and A$$ell$$ electrodes on the MZ waveguide using photolithography and wet-etching processes.

論文

Fabrication of Mach-Zehnder polimer waveguides by a direct-drawing technique using a focused proton beam

三浦 健太*; 佐藤 隆博; 石井 保行; 桐生 弘武*; 小澤 優介*; 江夏 昌志; 高野 勝昌*; 大久保 猛; 山崎 明義; 加田 渉; et al.

Key Engineering Materials, 534, p.158 - 161, 2013/00

 被引用回数:5 パーセンタイル:89.92

We develop a thermo-optic switch of the Mach-Zehnder type polymer waveguide using proton beam writing (PBW). In this study, we succeeded in near field pattern Mach-Zehnder type single mode polymer waveguides at a wavelength of 1550 nm. The samples for the waveguides were composed with a 15-$$mu$$-thick under-cladding layer of SiO$$_2$$ deposited on a Si substrate using radio-frequency sputtering and a 10-$$mu$$m-thick PMMA film spin-coated onto the SiO$$_2$$ layer as a core layer. We wrote Mach-Zehnder type waveguides having a width of 8 $$mu$$m on the PMMA layer by PBW with a beam size of $$sim$$1 $$mu$$m and a beam current of 50 pA. After this writing, the 10-$$mu$$m-thick-PMMA layer was deposited again as an upper-cladding layer by spin-coating. In the observation of these waveguides, the light of laser of 1550-nm wavelength was injected into one side of the waveguide through a single-mode fiber. From the observation of the light emitted from the opposite side of the waveguides, near field patterns was observed using a vidicon camera with an optical microscope. The observation result demonstrated that the light traveled by single mode in the Mach-Zehnder type polymer waveguide. In the conference, we will report the development of the Mach-Zehnder type polymer waveguide in detail. In addition, the thermo-optic switch at the wavelength of 1550 nm by the Mach-Zehnder type polymer waveguide will also be briefly reported.

論文

TIARA静電加速器の運転管理

宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 齋藤 勇一; 石井 保行; 佐藤 隆博; 大久保 猛; 奈良 孝幸; 北野 敏彦*; et al.

第7回高崎量子応用研究シンポジウム要旨集, P. 119, 2012/10

TIARAの3台の静電加速器では、2011年3月11日に発生した東北大地震による損傷はなかった。しかし、その後の計画停電の影響と管理区域入域制限措置により4月下旬までは運転することができなかった。この間に損失したマシンタイムを補うために12日間の土曜日(休日)運転を追加したことで、当初に予定した年間運転計画を達成した。タンデム加速器では、タンクベースフランジからSF$$_{6}$$ガスのリークが見つかったため、新規に角型断面のバイトン製ガスケットを設計し漏洩を防止した。

論文

Visualization of focused proton beam dose distribution by atomic force microscopy using blended polymer films based on polyacrylic acid

大道 正明*; 高野 勝昌*; 佐藤 隆博; 神谷 富裕; 石井 保行; 大久保 猛; 江夏 昌志; 加田 渉; 杉本 雅樹; 西川 宏之*; et al.

Journal of Nanoscience and Nanotechnology, 12, p.7401 - 7404, 2012/09

 被引用回数:2 パーセンタイル:11.6(Chemistry, Multidisciplinary)

A new visualization method for dose distribution of a focused proton beam in sub-micrometer scale was developed using a formation of a bulky cross-linked structure of polyacrylic acid -$$N$$, $$N$$'-methylence bisacrylamide, blend film. The areas irradiated by the focused proton beam were swelled on the film. The height of the swelling was significantly increased according to the beam fluence and the increase of containing ratio of the methylence bisacrylamide. The height was saturated at the fluence of 5$$times$$10$$^5$$ ions/$$mu$$m$$^{2}$$. The proton beam-sensitive polymer film was used for the analysis of dose distribution on its surface. The irradiated surface was observed by employing an atomic force microscope. This observation result showed that the method could be used to confirm the writing patterns and the beam-spot shape. Nanostructures with a crescent shape are visualized clearly at a misaligned beam-spot shape in the set up of the beam-optics.

論文

TIARA静電加速器の現状

宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 北野 敏彦*; 高山 輝充*; 織茂 貴雄*; 金井 信二*; 青木 勇希*; 山田 尚人*; et al.

第25回タンデム加速器及びその周辺技術の研究会報告集, p.64 - 66, 2012/07

TIARAの3台の静電加速器では、2011年3月11日に発生した東日本大震災による損傷はなかった。しかし、その後の計画停電の影響と管理区域入域制限措置により4月下旬までは運転することができなかった。この間に損失したマシンタイムを補うために12日間の土曜日(休日)運転を追加したことで、当初に予定した年間運転計画を達成した。タンデム加速器では、タンクベースフランジからSF$$_{6}$$ガスのリークが見つかったため、新規に角型断面のバイトンガスケットを設計し漏洩を防止した。イオン注入装置では、試料の混合とオーブン温度制御の工夫によりイオン源を交換することなく2種類のフラーレンイオンの生成を可能にした。

139 件中 1件目~20件目を表示