Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
江里 幸一郎; 鈴木 哲; 関 洋治; 毛利 憲介; 横山 堅二; Escourbiac, F.*; 平井 武志*; Kuznetsov, V.*
Fusion Engineering and Design, 98-99, p.1281 - 1284, 2015/10
被引用回数:40 パーセンタイル:95.98(Nuclear Science & Technology)原子力機構において、現在進められているフル・タングステンITER用垂直ターゲット、特に20MW/mの繰り返し高熱負荷に耐える必要があるプラズマ対向機器の開発を進め、フル・タングステンITERダイバータに十分な接合技術の健全性を実証することに成功した。接合技術の開発において、Wモノブロックとその支持構造体への取り付け支持脚の接合部の引張荷重試験を実施し、ITERダイバータの要求値の3倍以上である20kNの荷重に耐えることを確認した。また、6体の小型試験体を製作し、Wタイル接合部および冷却管の耐久性を確認するため、10および20MW/mにおける繰り返し熱負荷条件で試験を行った結果、全ての試験体がWタイルの剥離や冷却管からの水漏れを生ずることなく10MW/m・5000サイクルおよび20MW/m・1000サイクルに耐えた。この20MW/mのサイクル数はITERダイバータへの要求値の3倍以上である。
関 洋治; 江里 幸一郎; 鈴木 哲; 横山 堅二; 毛利 憲介; 平井 武志*; Escourbiac, F.*; Kuznetsov, V.*
Proceedings of 25th IAEA Fusion Energy Conference (FEC 2014) (CD-ROM), 8 Pages, 2014/10
Through R&D for a plasma facing unit (PFU) of a full-tungsten (W) ITER divertor, Japan Atomic Energy Agency (JAEA) succeeded in demonstrating the durability of the W divertor which endured a repetitive heat load of MW/m without macroscopic cracks. At the beginning of this activity, the bonding technology of armor to heat sink was one of the most important key issues in a manufacturing process. JAEA improved the bonding process of the W divertor mock-ups. At first the bonding between the W armor and the copper interlayer (Cu) is performed by using several technologies, such as "Direct casting " or "Diffusion bonding" or "HIP bonding". Then the brazing between the Cu and the cooling pipe is done. Then the rejection rate due to those bonding processes has been significantly been reduced. As a performance test for the bonding and a heat removal capability, the high heat flux (HHF) testing was carried out for 6 small-scale mock-ups for the R&D of the full-W ITER divertor. Moreover, a W part of 4 full-scale prototype PFUs were also tested. In the tests, all of the W monoblocks endured the repetitive heat load of MW/m cycles and MW/m cycles without the macroscopic crack, which strongly encourages the realization of the full-W divertor target from the start of the operation in ITER. This paper presents the latest R&D activities on the full-W ITER divertor in JAEA.
平井 武志*; 江里 幸一郎; Majerus, P.*
Materials Transactions, 46(3), p.412 - 424, 2005/03
被引用回数:111 パーセンタイル:90.2(Materials Science, Multidisciplinary)国際核融合実験炉ITERの設計ではベリリウム,炭素繊維強化複合材料(CFC),タングステンがプラズマ対向材料として選択されている。プラズマ対向材料は高熱負荷に曝されるため、その熱負荷に耐えるプラズマ対向機器の開発が不可欠である。通常運転時の定常熱負荷はダイバータ部で20MW/m、第一壁部で0.5MW/mと評価されている。この定常熱負荷試験のために、電子ビーム,粒子ビーム,赤外線ヒーターでの試験及びインパイル試験が行われてきた。その他、非定常なイベントで、高密度で短いパルスのさらに過酷な熱負荷,プラズマディスラプション,プラズマの垂直位置変位(VDE)、そしてELMがプラズマ対向材料に大きな熱流束をもたらす。この模擬実験として電子ビーム(短パルス),プラズマガンそして高出力レーザー装置での実験が行われてきた。ここでは現在選択されているITERのプラズマ対向機器について述べるとともに、これらの装置の特徴と最近の実験結果について纏めたものを報告する。