検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 51 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

報告書

HTTR燃料セルモデルにおける可燃性毒物周辺のメッシュ効果

藤本 望*; 福田 航大*; 本多 友貴*; 栃尾 大輔; Ho, H. Q.; 長住 達; 石井 俊晃; 濱本 真平; 中野 優美*; 石塚 悦男

JAEA-Technology 2021-008, 23 Pages, 2021/06

JAEA-Technology-2021-008.pdf:2.62MB

SRACコードシステムを用いて可燃性毒物棒周辺のメッシュ分割がHTTR炉心の燃焼計算に与える影響を調べた。この結果、可燃性毒物棒内部のメッシュ分割は燃焼計算に大きな影響を与えないこと、実効増倍率は可燃性毒物棒周辺の黒鉛領域をメッシュ分割することで従来計算より測定値に近い値が得られることが明らかとなった。これにより、HTTR炉心の燃焼挙動をより適切に評価するには、可燃性毒物棒周辺黒鉛領域のメッシュ分割が重要になることが明らかとなった。

論文

Promising neutron irradiation applications at the high temperature engineering test reactor

Ho, H. Q.; 本多 友貴*; 濱本 真平; 石井 俊晃; 高田 昌二; 藤本 望*; 石塚 悦男

Journal of Nuclear Engineering and Radiation Science, 6(2), p.021902_1 - 021902_6, 2020/04

High temperature engineering test reactor (HTTR), a prismatic type of the HTGR, has been constructed to establish and upgrade the basic technologies for the HTGRs. Many irradiation regions are reserved in the HTTR to be served as a potential tool for an irradiation test reactor in order to promote innovative basic researches such as materials, fusion reactor technology, and radiation chemistry and so on. This study shows the overview of some possible irradiation applications at the HTTRs including neutron transmutation doping silicon (NTD-Si) and iodine-125 ($$^{125}$$I) productions. The HTTR has possibility to produce about 40 tons of doped Si-particles per year for fabrication of spherical silicon solar cell. Besides, the HTTR could also produce about 1.8$$times$$10$$^{5}$$ GBq/year of $$^{125}$$I isotope, comparing to 3.0$$times$$10$$^{3}$$ GBq of total $$^{125}$$I supplied in Japan in 2016.

論文

Feasibility study of large-scale production of iodine-125 at the high temperature engineering test reactor

Ho, H. Q.; 本多 友貴*; 濱本 真平; 石井 俊晃; 藤本 望*; 石塚 悦男

Applied Radiation and Isotopes, 140, p.209 - 214, 2018/10

 被引用回数:3 パーセンタイル:30.45(Chemistry, Inorganic & Nuclear)

The feasibility of a large-scale iodine-125 production from natural xenon gas at high-temperature gas-cooled reactors was investigated. A high-temperature engineering test reactor, which is located in Japan, was used as a reference HTGR reactor in this study. First, a computer code based on a Runge-Kutta method was developed to calculate the quantities of isotopes arising from the neutron irradiation of natural xenon gas target. This code was verified with a good agreement with a reference result. Next, optimization of irradiation planning was carried out. As results, with 4 days of irradiation and 8 days of decay, the $$^{125}$$I production could be maximized and the $$^{126}$$I contamination was within an acceptable level. The preliminary design of irradiation channels at the HTTR was also optimized. The case with 3 irradiation channels and 20-cm diameter was determined as the optimal design, which could produce approximately 180,000 GBq per year of $$^{125}$$I production.

論文

Feasibility study of new applications at the high-temperature gas-cooled reactor

Ho, H. Q.; 本多 友貴*; 濱本 真平; 石井 俊晃; 高田 昌二; 藤本 望*; 石塚 悦男

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 6 Pages, 2018/10

Besides the electricity generation and hydrogen production, HTGRs have many advantages for thermal neutron irradiation applications such as stable operation in longterm, large space available for irradiation target, and high thermal neutron economy. This study summarized the feasibility of new irradiation applications at the HTGRs including neutron transmutation doping silicon and I-125 productions. The HTTR located in Japan was used as a reference HTGR in this study. Calculation results show that HTTR could irradiate about 40 tons of doped Si particles per year for fabrication of spherical silicon solar cell. Besides, the HTTR could also produce about 1.8x105 GBq in a year of I-125, comparing to 3.0x103 GBq of total I-125 supplied in Japan in 2016.

論文

Numerical evaluation on fluctuation absorption characteristics based on nuclear heat supply fluctuation test using HTTR

高田 昌二; 本多 友貴*; 稲葉 良知; 関田 健司; 根本 隆弘; 栃尾 大輔; 石井 俊晃; 佐藤 博之; 中川 繁昭; 沢 和弘*

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

HTGRに接続する核熱利用システムの設計では、化学プラント会社の容易な参入を可能にするため、非原子炉級で設計されるが、熱利用システムで異常が発生した場合でも原子炉の運転を継続できることとしている。需要地近接立地で負荷追従運転を実現するため、原子炉入口および出口冷却材温度を一定に保ちながら一次系ガス圧力を変化させるインベントリ制御は原子炉出力を制御する方法の候補の1つとされている。HTTRを用いた非核加熱運転による熱負荷変動吸収試験結果をもとに、異なる一次系ガス圧力で原子炉入口温度をステップ状に変動させた。数値解析の結果、圧力の低下により変動吸収特性が劣化しないことが明らかになった。また、原子炉出力の80%でも、原子炉出口温度がスクラムレベルに達しないことも明らかにした。

論文

Uncertainty analysis for source term evaluation of high temperature gas-cooled reactor under accident conditions; Identification of influencing factors in loss-of-forced circulation accidents

本多 友貴; 佐藤 博之; 中川 繁昭; 大橋 弘史

Journal of Nuclear Engineering and Radiation Science, 4(3), p.031013_1 - 031013_11, 2018/07

近年、社会的ニーズである確率論的リスク評価実施に向けて、不確実さ評価の重要性が高まっている。本研究では、高温ガス炉の不確実さ伝搬評価の入力値となる影響因子の系統的な選定手順を提案するとともに本手法の適用性確認を目的とし試評価を実施した。試評価は、高温ガス炉の代表的な過渡事象である減圧事故に制御棒挿入失敗が重畳した場合を対象とし、ソースターム評価に影響を及ぼす燃料温度を不確実さ因子に設定し核熱流動の観点から実施し、結果として、提案した手法により16の影響因子を選定した。今後は選定した影響因子を入力値とし不確実さ伝搬解析を実施予定である。

論文

Proposal of a neutron transmutation doping facility for n-type spherical silicon solar cell at high-temperature engineering test reactor

Ho, H. Q.; 本多 友貴; 元山 瑞樹*; 濱本 真平; 石井 俊晃; 石塚 悦男

Applied Radiation and Isotopes, 135, p.12 - 18, 2018/05

 被引用回数:7 パーセンタイル:58.44(Chemistry, Inorganic & Nuclear)

The p-type spherical silicon solar cell is a candidate for future solar energy with low fabrication cost, however, its conversion efficiency is only about 10%. The conversion efficiency of a silicon solar cell can be increased by using n-type silicon semiconductor as a substrate. This study proposed a new method of neutron transmutation doping silicon (NTD-Si) for producing the n-type spherical solar cell, in which the Si-particles are irradiated directly instead of the cylinder Si-ingot as in the conventional NTD-Si. By using a screw, an identical resistivity could be achieved for the Si-particles without a complicated procedure as in the NTD with Si-ingot. Also, the reactivity and neutron flux swing could be kept to a minimum because of the continuous irradiation of the Si-particles. A high temperature engineering test reactor (HTTR), which is located in Japan, was used as a reference reactor in this study. Neutronic calculations showed that the HTTR has a capability to produce about 40 ton of 10 $$Omega$$ cm resistivity Si-particles for fabrication of the n-type spherical solar cell.

論文

Investigation of uncertainty caused by random arrangement of coated fuel particles in HTTR criticality calculations

Ho, H. Q.; 本多 友貴; 後藤 実; 高田 昌二

Annals of Nuclear Energy, 112, p.42 - 47, 2018/02

 被引用回数:8 パーセンタイル:63.44(Nuclear Science & Technology)

Coated fuel particle (CFP) is one of important factors attributing to the inherent safety feature of high temperature engineering test reactor (HTTR). However, the random arrangement of CFPs makes the simulation more complicated, becoming one of the factors affects the accuracy of the HTTR criticality calculations. In this study, an explicit random model for CFPs arrangement, namely realized random packing (RRP), was developed for the whole core of HTTR using a Monte-Carlo MCNP6 code. The effect of random placement of CFPs was investigated by making a comparison between the RRP and conventional uniform models. The results showed that the RRP model gave a lower excess reactivity than that of the uniform model, and the more number of fuel columns loading into the core, the greater the difference in excess reactivity between the RRP and uniform models. For example, the difference in excess reactivity increased from 0.07 to 0.17%$$Delta$$k/k when the number of fuel column increased from 9 to 30. Regarding the control rods position prediction, the RRP showed the results, which were closer to experiment than the uniform model. In addition, the difference in control rods position between the RRP and uniform models also increases from 12 to 17 mm as increasing number of fuel columns from 19 to 30.

論文

Uncertainty analysis for source term evaluation of high temperature gas-cooled reactor under accident conditions; Identification of influencing factors in loss-of-forced circulation accidents

本多 友貴; 佐藤 博之; 中川 繁昭; 大橋 弘史

Proceedings of 25th International Conference on Nuclear Engineering (ICONE-25) (CD-ROM), 9 Pages, 2017/07

近年、社会的ニーズである確率論的リスク評価実施に向けて、不確実さ評価の重要性が高まっている。本研究では、高温ガス炉で想定される減圧事故に制御棒挿入失敗が重畳した事象を対象とした不確実さ評価手法の確立を目指した検討を進めており、ソースターム評価に影響を及ぼす燃料温度評価の不確実さの定量化を目指している。本論文では、そのはじめとして、不確実評価の入力値となる重要因子選定手順を提案するとともに変動パラメータの系統的な導出及び当該変動パラメータが保有する不確実さ抽出の結果について報告する。

報告書

HTTRを用いた崩壊熱最適評価手法の適用性確認試験(非核加熱試験); 原子炉の残留熱除熱特性評価モデルの検証

本多 友貴; 稲葉 良知; 中川 繁昭; 山崎 和則; 小林 正一; 青野 哲也; 柴田 大受; 石塚 悦男

JAEA-Technology 2017-013, 20 Pages, 2017/06

JAEA-Technology-2017-013.pdf:2.52MB

崩壊熱は高温ガス炉の代表的な事象である減圧事故時の高温ガス炉の固有の安全性を示す上で重要な因子である。これまで、安全評価で使用する崩壊熱については、旧原子力安全委員会の安全審査指針に基づき、十分な保守性を考慮した評価式を用いてきた。一方で、社会的ニーズである確率論的リスク評価実施に向けて不確実さ評価の重要性が高まっている。これを受けて、原子力機構では、高温工学試験研究炉(HTTR)を活用して不確実さ評価手法の確立を目指した研究を進めているが、本検討を進めるにあたり参照値となる崩壊熱データが必要となった。しかしながら、これまで、ブロック型高温ガス炉を対象とした崩壊熱最適評価手法の適用性確認に必要なデータは存在していない。そこで、HTTRを用いて、実炉データに基づく崩壊熱の評価を実施し、崩壊熱最適評価手法の適用性確認に必要なデータ取得を目指す。一連の試験の初めとして、平成28年度2月に、長期運転をしていないHTTRを用いて、崩壊熱が無い理想的な条件の下、崩壊熱評価の適用性確認試験(コールド試験)実施し、高温ガス炉の残留熱除熱特性データを取得した。本報告書では、実炉データに基づく崩壊熱の評価手法の提案をすると共に、当該評価に必要となる原子炉の残留熱除熱特性評価手法の検証について報告する。

論文

Numerical investigation of the random arrangement effect of coated fuel particles on the criticality of HTTR fuel compact using MCNP6

Ho, H. Q.; 本多 友貴; 後藤 実; 高田 昌二

Annals of Nuclear Energy, 103, p.114 - 121, 2017/05

 被引用回数:8 パーセンタイル:61.68(Nuclear Science & Technology)

This study investigated the random arrangement effect of Coated Fuel Particle (CFP) on criticality of the fuel compact of High-Temperature engineering Test Reactor (HTTR). A utility program coupling with MCNP6, namely Realized Random Packing (RRP), was developed to model a random arrangement of the CFPs explicitly for the specified fuel compact of HTTR. The criticality and neutronic calculations for pin cell model were performed by using the Monte Carlo MCNP6 code with an ENDF/B-VII.1 neutron library data. First, the reliability of the RRP model was confirmed by an insignificant variance of the infinite multiplication factor (k$$_{rm inf}$$) among 10 differently random arrangements of the CFPs. Next, the criticality of RRP model was compared with those of Non-truncated Uniform Packing (NUP) model and On-the-fly Random Packing (ORP) model which is a stochastic geometry capability in MCNP6. The results indicated that there was no substantial difference between the NUP and ORP models. However, the RRP model presented a lower k$$_{rm inf}$$ of about 0.32-0.52%$$Delta$$k/k than the NUP model. In additions, the difference of k$$_{rm inf}$$ could be increased as the uranium enrichment decreases. The investigation of the 4-factor formula showed that the difference of k$$_{rm inf}$$ was predominantly given by the resonance escape probability, with the RRP model showing the smallest value.

論文

Benchmark study on realized random packing model for coated fuel particles of HTTR using MCNP6

Ho, H. Q.; 守田 圭介*; 本多 友貴; 藤本 望*; 高田 昌二

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 8 Pages, 2017/04

The Coated Fuel Particle plays an important role in the excellent safety feature of the High Temperature Gas-cooled Reactor. However, the random distribution of CFPs also makes the simulation of HTGR fuel become more complicated. The Monte Carlo N-particle (MCNP) code is one of the most well-known codes for validation of nuclear systems; unfortunately, it does not provide an appropriate function to model a statistical geometry explicitly. In order to deal with the stochastic media, a utility program for the random model, namely Realized Random Packing (RRP), has been developed particularly for High Temperature engineering Test Reactor (HTTR). This utility program creates a number of random points in an annular geometry. Then, these random points will be used as the center coordinate of CFPs in the MCNP6 input file and therefore the actual random arrangement of CFPs can be simulated explicitly. First, a pin-cell calculation was carried out to validate the RRP by comparing with Statistical Geometry (STG) model of MVP code. After that, the comparison between the RRP model (MCNP) and STG model (MVP) was shown in whole core criticality calculation, not only for the annular core but also for the fully-loaded core. The comparison of numerical results showed that the RRP model and STG model differed insignificantly in the multiplication factor as expected, regardless of the pin-cell or whole core calculations. In addition, the RRP model did not make the calculation time increase a lot in comparison with the conventional regular model (uniform arrangement).

論文

Measurement of temperature response of intermediate heat exchanger in heat application system abnormal simulating test using HTTR

小野 正人; 藤原 佑輔; 本多 友貴; 佐藤 博之; 島崎 洋祐; 栃尾 大輔; 本間 史隆; 澤畑 洋明; 飯垣 和彦; 高田 昌二

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 5 Pages, 2017/04

日本原子力研究開発機構は、HTTRを用いて高温ガス炉の核熱利用に向けて研究開発を実施している。高温ガス炉を用いた核熱利用システムは、化学プラント会社の参入の簡素化や建設費の観点から非原子力級を基本として設計している。そのため、原子炉の運転中に異常事象が発生して運転を継続できる必要がある。HTTRを用いた熱利用系異常模擬試験は、中間熱交換器の過渡温度挙動のデータを得るために温度に着目し非核熱で実施した。中間熱交換器は熱利用系とHTTRをつなげる重要な機器である。試験では、ヘリウム冷却材温度はガス循環機によって120$$^{circ}$$Cまで昇温され、熱移動に着目できる理想的な状況で実施された。試験は空気冷却器の流量を増加することによりヘリウムガスの温度を調節することで実施された。中間熱交換器の熱応答は調査され、伝熱管や伝熱促進板のような構成要素に対して、中間熱交換器の上部よりも下部の方が熱応答が遅いことが明らかとなった。この理由は、中間熱交換器の上部から下部に二次ヘリウムが流れるためと考えられえる。試験データは、安全評価コードのモデルを検証するために有益となるものである。

論文

Probabilistic risk assessment method development for high temperature gas-cooled reactor, 5; Accident progression analysis

本多 友貴; 佐藤 博之; 大橋 弘史

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 8 Pages, 2017/04

高温ガス炉の確率論的リスク評価(PRA)手法の確立に向けて、静的機器損傷時のソースターム評価手法の開発を進めている。本論文は、構築物及び静的機器が損傷する地震に起因する公衆被ばく上重要な事象として減圧事故を想定し、ソースターム評価上重要因子となる自然循環流量及び燃料最高温度に対する(1)損傷個所(一次系配管破損、スタンドパイプ破損)、(2)緩和機能喪失(炉心冷却機能喪失、反応度制御機能喪失)の重畳の影響について実用高温ガス炉GTHTR300を対象として評価した。結果として、緩和機能喪失の重畳によりさらなる事故進展がないことを定量的に示した。これにより、高温ガス炉の特徴である安全性を活かした設計により、軽水炉と比較して事故シーケンス及びソースターム評価の簡素化が可能であることを示した。

報告書

Neutronic characteristic of HTTR fuel compact with various packing models of coated fuel particle

Ho, H. Q.; 本多 友貴; 後藤 実; 高田 昌二

JAEA-Technology 2016-040, 16 Pages, 2017/03

JAEA-Technology-2016-040.pdf:2.89MB

高温工学試験研究炉(HTTR)の臨界特性に対する被覆粒子燃料(CFP)のトランケーション(切欠き)の影響を調べるため、燃料コンパクト中のCFPの配列に関する4つの異なるモデル、すなわち、規則配列でトランケーションの有無のモデル、不規則配列でトランケーションの有無のモデルを作り、モンテカルロコードMCNP6、ENDF/B-VII.1ライブラリを使って臨界計算を実施した。この結果、トランケーションありのモデルの無限実効増倍率は、k$$_{rm inf}$$トランケーション無しの場合と比較して小さくなり、規則・不規則配列に関係しないことを明らかにした。さらに、4因子公式の4因子の比較により、k$$_{rm inf}$$の違いが主に共鳴を逃れる確率によるものであることを明らかにした。また、共鳴を逃れる確率の違いはCFPのトランケーションモデルの等価直径が小さくなり、自己遮蔽効果の影響により共鳴領域で捕獲反応が増加するために生じることを明かにした。

論文

Burn-up dependency of control rod position at zero-power criticality in the high-temperature engineering test reactor

本多 友貴; 藤本 望*; 澤畑 洋明; 高田 昌二; 沢 和弘

Journal of Nuclear Engineering and Radiation Science, 3(1), p.011013_1 - 011013_4, 2017/01

HTTRの燃焼挙動は今後の高温ガス炉開発において重要なデータである。現在までにHTTRを用いた様々な試験が行われており、解析精度の検証が行われてきたが燃焼を伴う解析精度の検証が不十分であった。また、現在のHTTRは燃焼中期にあり、十分なデータが取得されている。そこで本研究では、燃焼を伴う臨界制御棒位置のデータを用いて核解析コードの解析精度の検討を行った。しかしながら、定格試験データは炉内に温度分布があるため、誤差要因が多く検証が困難であった。対してHTTRでは試験ごとに400Kの低温臨界制御棒位置のデータを保有しており、また400K条件での試験データは温度分布が無く解析値と比較する上で良質なデータであるため、まずこれらのデータを用いて燃焼による拡散計算コードCITATIONによる解析精度の検討を行い十分な精度があることを確かめた。これにより、Sm, Puなどの蓄積評価が十分であることを確認した。これらのコードの検証により将来高温ガス炉のための技術基盤の確立を目指す。

論文

Study on sensitivity of control rod cell model in reflector region of high-temperature engineering test reactor

本多 友貴; 藤本 望*; 澤畑 洋明; 高田 昌二; 沢 和弘

Journal of Nuclear Engineering and Radiation Science, 3(1), p.011005_1 - 011005_6, 2017/01

HTTRでは制御棒二段階挿入方法を採用しており、1段目で反射体領域に制御棒を挿入し未臨界にする仕組みとなっている。また将来高温ガス炉においても反射体領域にのみ制御棒を挿入する設計が存在するため、1段目の反射体領域に挿入される制御棒の反応度の解析精度が重要となる。しかしながら、現在まで制御棒価値の高い燃料領域に挿入される制御棒に合わせてセルモデルを作成していたため、1段目の制御棒価値の解析精度が不十分であることが分かった。そこで1段目の制御棒を取り巻く状況に合わせて反射体領域断面積を作成することによる感度解析を行い、将来高温ガス炉の研究開発のための技術基盤の確立を目指す。

論文

Investigation of absorption characteristics for thermal-load fluctuation using HTTR

栃尾 大輔; 本多 友貴; 佐藤 博之; 関田 健司; 本間 史隆; 澤畑 洋明; 高田 昌二; 中川 繁昭

Journal of Nuclear Science and Technology, 54(1), p.13 - 21, 2017/01

 被引用回数:1 パーセンタイル:10.71(Nuclear Science & Technology)

原子力機構ではGTHTR300Cの設計研究を行っている。水素製造施設のような熱利用系において発生した異常による熱負荷の変動が発生した場合でも、原子炉システムは、安定かつ安全な運転、更に安定な電力供給を継続することが求められている。そのためには、熱負荷変動を原子炉システムで吸収でき、安定かつ安全な運転を継続できることを実証する必要がある。原子力機構では、原子炉及びIHXによる熱負荷変動吸収特性を明らかにするために、核熱を伴わない熱負荷変動吸収試験を計画・実施した。その結果、原子炉は予想より大きな吸収容量を有しており、IHXも熱利用系で発生した熱負荷変動を吸収できることを明らかにすることができた。このことから、原子炉及びIHXは、熱利用系で発生した熱負荷変動の有意な吸収容量を有していることを確認した。さらに、RELAP5/MOD3に基づいた安全評価コードは、熱負荷変動吸収挙動を保守的に評価できることを確認した。

論文

Sensitivity analysis of xenon reactivity temperature dependency for HTTR LOFC test by using RELAP5-3D code

本多 友貴; 深谷 裕司; 中川 繁昭; Baker, R. I.*; 佐藤 博之

Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.704 - 713, 2016/11

高温ガス炉は固有の安全性を保有しており、この安全性を実証するために高温工学試験研究炉(HTTR)を用いて強制冷却喪失試験(LOFC試験)を実施している。原子炉出力9MWにおけるLOFC試験では、原子炉出力低下後に再臨界が確認された。これまで、強制冷却喪失事象を評価するため、RELAP5-3Dコードを用いて一点炉動特性解析手法の高度化を進めてきている。本研究では、高温ガス炉は原子炉出入口に大きな温度差があり、過渡時の温度変動領域が大きいことから、Xe-135反応度の温度依存性に着目し、Xe-135の吸収断面積の温度依存性について、原子炉出力9MWにおけるLOFC試験における再臨界への影響を評価した。その結果、このXe-135反応度の温度依存性の影響は非常に大きく、高温ガス炉の強制冷却喪失事象においてはこの温度依存性を適切に考慮することが重要であることを明らかにした。

論文

Development of a core coolant flow distribution calculation code for HTGRs

稲葉 良知; 本多 友貴; 西原 哲夫

Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.985 - 990, 2016/11

高温ガス炉の熱的健全性を確保するために、定格運転時における燃料最高温度は、設計目標値以下である必要がある。ブロック型高温ガス炉の炉心熱流動設計において、燃料最高温度は、熱出力、炉心形状、出力・照射量分布及び炉心冷却材流量分布に基づいて評価される。高温工学試験研究炉(HTTR)の設計段階で使用された炉心冷却材流量配分計算コードは、UNIXシステム上での動作を前提としており、その操作及び実行手順は複雑で、使い勝手の良いものではなかった。それゆえに、簡単で易しい操作と実行手順を持つ、使い勝手の良い新しい炉心冷却材流量配分計算コードを開発してきた。本論文では、新コードの概要を述べ、その検証計算の第1段階として、1燃料カラムを持つ炉外試験のシミュレーション結果を示した。その結果は、試験結果と良い一致を見た。

51 件中 1件目~20件目を表示