検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 100 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Does fault activation affect the hydraulic disconnectivity of faults in mudstone?

大野 宏和; 武田 匡樹; 石井 英一

Extended abstract of International Conference on Coupled Processes in Fractured Geological Media; Observation, Modeling, and Application (CouFrac 2020) (Internet), 4 Pages, 2020/11

Low-permeability mudstone is a candidate host rock for radioactive waste disposal, but thermal-hydro-mechanically induced shear stresses and thermal pressurization due to the release of heat from radioactive waste may cause activation of faults in the host rock. Previous studies revealed that hydraulic connectivity of fractures in the deeper part of the Wakkanai Formation (siliceous mudstone) is limited and hence its effective permeability is very low. We performed an injection test on a fault in the deeper part to induce fault activation, and investigated the effect of fault activation on the hydraulic disconnectivity of the fault by analyzing pressure derivatives obtained by repetitive packer tests before and after the injection. The injection test successfully induced a remarkable dilational-shear failure within the fault, and the log-log plots of pressure derivatives changed after the failure from an upward-trend-type indicating a limited extent of flow-paths to a horizontal-trend-type suggesting well-connected flow-paths. The test-section pressure had already recovered when the horizontal-trend-type was observed. After the borehole had been open for 6 weeks, the pressure derivatives were restored to the upward-trend-type. We consider that self-sealing such as fracture closure by creep recovered the hydraulic disconnectivity of the fault after the failure.

報告書

Status of study of long-term assessment of transport of radioactive contaminants in the environment of Fukushima (FY2018) (Translated document)

長尾 郁弥; 新里 忠史; 佐々木 祥人; 伊藤 聡美; 渡辺 貴善; 土肥 輝美; 中西 貴宏; 佐久間 一幸; 萩原 大樹; 舟木 泰智; et al.

JAEA-Research 2020-007, 249 Pages, 2020/10

JAEA-Research-2020-007.pdf:15.83MB

2011年3月11日に発生した太平洋三陸沖を震源とするマグニチュード9.0の東北地方太平洋沖地震とそれに伴って発生した津波により、東京電力(現東京電力ホールディングス)福島第一原子力発電所の事故が発生し、その結果、環境中へ大量の放射性物質が放出された。この事故により放出された放射性核種は、その大部分が森林に沈着している。これに対し、面積が広大であり大量の除去土壌などが生じる、多面的な森林の機能が損なわれる可能性があるなどの問題があり、生活圏近傍を除き、汚染された森林の具体的な除染計画はない。そのため、未除染の森林から放射性セシウムが流出し、既に除染された生活圏に流入することで空間線量率が上がってしまうのではないか(外部被ばくに関する懸念)、森林から河川に流出した放射性セシウムが農林水産物に取り込まれることで被ばくするのではないか、規制基準値を超えて出荷できないのではないか(内部被ばくに関する懸念)などの懸念があり、避難住民の帰還や産業再開の妨げとなる可能性があった。日本原子力研究開発機構では、環境中に放出された放射性物質、特に放射性セシウムの移動挙動に関する「長期環境動態研究」を2012年11月より実施している。この目的は、自治体の施策立案を科学的側面から補助する、住民の環境安全に関する不安を低減し、帰還や産業再開を促進するといった点にある。本報告書は、原子力機構が福島県で実施した環境動態研究におけるこれまでの研究成果について取りまとめたものである。

報告書

幌延深地層研究計画における地下施設での調査研究段階; (第3段階: 必須の課題2015-2019年度)研究成果報告書

中山 雅; 雑賀 敦; 木村 駿; 望月 陽人; 青柳 和平; 大野 宏和; 宮川 和也; 武田 匡樹; 早野 明; 松岡 稔幸; et al.

JAEA-Research 2019-013, 276 Pages, 2020/03

JAEA-Research-2019-013.pdf:18.72MB

幌延深地層研究計画は、日本原子力研究開発機構(原子力機構)が堆積岩を対象に北海道幌延町で実施している地層処分技術に関する研究開発の計画である。幌延深地層研究計画は、「地上からの調査研究段階(第1段階)」、「坑道掘削(地下施設建設)時の調査研究段階(第2段階)」、「地下施設での調査研究段階(第3段階)」の3つの調査研究段階に分けて進めている。原子力機構の第3期中長期計画では、本計画について、「実際の地質環境における人工バリアの適用性確認、処分概念オプションの実証、地殻変動に対する堆積岩の緩衝能力の検証に重点的に取り組む。また、平成31年度末までに研究終了までの工程やその後の埋戻しについて決定する。」としている。本稿では、第3期中長期計画期間のうち、平成27年度から令和1年度までの地下施設での調査研究段階(第3段階)における調査研究のうち、原子力機構改革の中で必須の課題として抽出した(1)実際の地質環境における人工バリアの適用性確認、(2)処分概念オプションの実証、(3)地殻変動に対する堆積岩の緩衝能力の検証、の3つの研究開発課題について実施した調査研究の成果を取りまとめた。

報告書

福島における放射性セシウムの環境動態研究の現状(平成30年度版)

長尾 郁弥; 新里 忠史; 佐々木 祥人; 伊藤 聡美; 渡辺 貴善; 土肥 輝美; 中西 貴宏; 佐久間 一幸; 萩原 大樹; 舟木 泰智; et al.

JAEA-Research 2019-002, 235 Pages, 2019/08

JAEA-Research-2019-002.pdf:21.04MB

2011年3月11日に発生した太平洋三陸沖を震源とするマグニチュード9.0の東北地方太平洋沖地震とそれに伴って発生した津波により、東京電力福島第一原子力発電所の事故が発生し、その結果、環境中へ大量の放射性物質が放出され、その大部分が森林に沈着している。これに対し、面積が広大であり大量の除去土壌等が生じる、多面的な森林の機能が損なわれる可能性があるなどの問題があり、生活圏近傍を除き、汚染された森林の具体的な除染計画はない。そのため、未除染の森林から放射性セシウムが流出し、既に除染された生活圏に流入することに対する懸念があり、避難住民の帰還や産業再開の妨げとなる可能性があった。原子力機構では、環境中に放出された放射性物質、特に放射性セシウムの移動挙動に関する「長期環境動態研究」を2012年11月より実施している。この目的は、自治体の施策立案を科学的側面から補助する、住民の環境安全に関する不安を低減し、帰還や産業再開を促進するといった点にある。本報告書は、原子力機構が福島県で実施した環境動態研究におけるこれまでの研究成果について取りまとめたものである。

論文

ガスが溶存した地下水を含む泥岩中の割れ目を対象とした原位置トレーサー試験条件の設定に関する検討

武田 匡樹; 石井 英一; 大野 宏和; 川手 訓*

原子力バックエンド研究(CD-ROM), 25(1), p.3 - 14, 2018/06

泥岩中における断層帯および掘削影響領域(EDZ)に発達する割れ目は、主要な水みちとして機能することがあるため、これらの構造における物質移行特性を評価することは、高レベル放射性廃棄物の地層処分における安全評価において重要である。しかし、泥岩中の割れ目を対象とした原位置トレーサー試験の適用事例は国内外含めて非常に少ない。そこで、日本原子力研究開発機構では、稚内層と呼ばれる珪質泥岩中の割れ目を対象に、非収着性であるウラニンを用いた原位置トレーサー試験を実施した。トレーサー試験の結果から、注水流量を揚水流量より大きくした場合に脱ガスの影響を低減することができる一方で、同様の条件ではトレーサー回収率が低くなったことから、本稿で報告したトレーサー試験においては、注水流量を揚水流量よりもやや高く設定することが適切な試験条件であることが分かった。ガスが溶存した地下水を含む岩盤を対象に注水および揚水を伴う原位置トレーサー試験を実施する際は、注水と揚水の流量比が(1)脱ガスの発生に与える影響、(2)トレーサー回収率に与える影響の双方を評価することが、脱ガスを抑制しつつトレーサー回収率を高めるための適切な試験条件を見出すことに有効である。

報告書

幌延深地層研究計画における坑道掘削(地下施設建設)時の調査研究段階(第2段階:深度350mまで)研究成果報告書

佐藤 稔紀; 笹本 広; 石井 英一; 松岡 稔幸; 早野 明; 宮川 和也; 藤田 朝雄*; 棚井 憲治; 中山 雅; 武田 匡樹; et al.

JAEA-Research 2016-025, 313 Pages, 2017/03

JAEA-Research-2016-025.pdf:45.1MB

幌延深地層研究計画は、高レベル放射性廃棄物の地層処分技術に関わる研究開発の一環として、日本原子力研究開発機構が北海道幌延町で進めているプロジェクトである。本報告書は、深度350mの研究坑道掘削終了までの期間(2005年4月から2014年6月)に行われた第2段階における調査研究の成果を取りまとめたものである。第2段階における深地層の科学的研究では、「地質環境調査技術開発」、「深地層における工学的技術の基礎の開発」、「地質環境の長期安定性に関する研究」を、地層処分研究開発では、「処分技術の信頼性向上」、「安全手法の高度化」を実施し、これらに加えて「地下施設の建設」、「環境モニタリング」を実施し、当初の目標どおりの成果を得た。「地質環境調査技術開発」では、坑道掘削中の地質環境の変化を把握するとともに、第1段階で予測した結果の妥当性を確認した。「深地層における工学的技術の基礎の開発」においては、地下施設の建設に適用した工学的技術の有効性を確認した。「地質環境の長期安定性に関する研究」ならびに地層処分研究開発の「処分技術の信頼性向上」と「安全手法の高度化」では、この期間の研究成果をまとめた。「地下施設の建設」では坑道掘削の実績を整理した。「環境モニタリング」では、環境調査などを継続し、地上及び地下施設の建設に伴う影響の低減を図る措置が適切であることを確認した。

論文

Common reed accumulates starch in its stem by metabolic adaptation under Cd stress conditions

樋口 恭子*; 金井 雅武*; 土屋 将久*; 石井 春香*; 渋谷 尚史*; 藤田 直子*; 中村 保典*; 鈴井 伸郎; 藤巻 秀; 三輪 睿太郎*

Frontiers in Plant Science (Internet), 6, p.138_1 - 138_6, 2015/03

 被引用回数:18 パーセンタイル:57.94(Plant Sciences)

In a previous study, we reported that the common reed accumulates water-soluble Cd complexed with an $$alpha$$-glucan-like molecule, and that the synthesis of this molecule is induced in the stem of the common reed under Cd stress. We studied the metabolic background to ensure $$alpha$$-glucan accumulation under the Cd stress conditions that generally inhibit photosynthesis. We found that the common reed maintained an adequate CO$$_{2}$$ assimilation rate, tended to allocate more assimilated $$^{11}$$C to the stem, and accumulated starch granules in its stem under Cd stress conditions. AGPase activity, which is the rate-limiting enzyme for starch synthesis, increased in the stem of common reed grown in the presence of Cd. Starch accumulation in the stem of common reed was not obvious under other excess metal conditions. Common reed may preferentially allocate assimilated carbon as the carbon source for the formation of Cd and $$alpha$$-glucan complexes in its stem followed by prevention of Cd transfer to leaves acting as the photosynthetic organ. These responses may allow the common reed to grow even under severe Cd stress conditions.

論文

From laboratory to field; ${it OsNRAMP5}$-knockdown rice is a promising candidate for Cd phytoremediation in paddy fields

高橋 竜一*; 石丸 泰寛*; Shimo, H.*; Bashir, K.*; 瀬野浦 武志*; 杉本 和彦*; 小野 和子*; 鈴井 伸郎; 河地 有木; 石井 里美; et al.

PLOS ONE (Internet), 9(6), p.e98816_1 - e98816_7, 2014/06

 被引用回数:51 パーセンタイル:86.87(Multidisciplinary Sciences)

Previously, we reported that OsNRAMP5 functions as a manganese, iron, and cadmium (Cd) transporter. The shoot Cd content in ${it OsNRAMP5}$ RNAi plants was higher than that in wild-type (WT) plants, whereas the total Cd content (roots plus shoots) was lower. For efficient Cd phytoremediation, we produced ${it OsNRAMP5}$ RNAi plants using the natural high Cd-accumulating cultivar Anjana Dhan (A5i). Using a positron-emitting tracer imaging system, we assessed the time-course of Cd absorption and accumulation in A5i plants. Enhanced $$^{107}$$Cd translocation from the roots to the shoots was observed in A5i plants. To evaluate the phytoremediation capability of A5i plants, we performed a field experiment in a Cd-contaminated paddy field. The biomass of the A5i plants was unchanged by the suppression of ${it OsNRAMP5}$ expression; the A5i plants accumulated twice as much Cd in their shoots as WT plants. Thus, A5i plants could be used for rapid Cd extraction and the efficient phytoremediation of Cd from paddy fields, leading to safer food production.

論文

Mach-Zehnder polymer waveguides fabricated using proton beam writing

三浦 健太*; 佐藤 隆博; 石井 保行; 江夏 昌志; 桐生 弘武*; 小澤 優介*; 高野 勝昌*; 大久保 猛; 山崎 明義; 加田 渉; et al.

JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 126, 2013/01

In this study, a PMMA-based MZ waveguide was fabricated utilizing PBW to develop a thermo-optic switch. A 10-$$mu$$m-thick PMMA film was firstly spin-coated onto the 15 $$mu$$m SiO$$_2$$ film as the under cladding. Cores of a MZ waveguide with 8 $$mu$$m width were secondary drawn at the dose of 100 nC/mm$$^2$$ in the PMMA film using PBW with H$$^+$$ beam of the size of $$sim$$1.1 $$mu$$m and beam current of $$sim$$50 pA at 1.7 MeV. The MZ waveguide was drawn by symmetrically coupling two Y junctions and its branching angle was set to 2$$^circ$$ to reduce optical branching loss. Finally a 10-$$mu$$m-thick PMMA film was deposited again on the sample as an upper cladding by spin-coating. The mode-field diameter of near field patterns with about 10 $$mu$$m width was observed at $$lambda$$= 1.55 $$mu$$m on the basis of a fundamental mode without no higher-order modes which required to develop our objective MZ type thermo-optic switch for optical-fiber telecommunication. The result of the observation showed that the PMMA-based single-mode MZ waveguide for $$lambda$$= 1.55 $$mu$$m was successfully fabricated using PBW. As the next step to develop the optical switch, we will form a Ti thin-film heater and A$$ell$$ electrodes on the MZ waveguide using photolithography and wet-etching processes.

論文

Fabrication of Mach-Zehnder polimer waveguides by a direct-drawing technique using a focused proton beam

三浦 健太*; 佐藤 隆博; 石井 保行; 桐生 弘武*; 小澤 優介*; 江夏 昌志; 高野 勝昌*; 大久保 猛; 山崎 明義; 加田 渉; et al.

Key Engineering Materials, 534, p.158 - 161, 2013/00

 被引用回数:5 パーセンタイル:89.92

We develop a thermo-optic switch of the Mach-Zehnder type polymer waveguide using proton beam writing (PBW). In this study, we succeeded in near field pattern Mach-Zehnder type single mode polymer waveguides at a wavelength of 1550 nm. The samples for the waveguides were composed with a 15-$$mu$$-thick under-cladding layer of SiO$$_2$$ deposited on a Si substrate using radio-frequency sputtering and a 10-$$mu$$m-thick PMMA film spin-coated onto the SiO$$_2$$ layer as a core layer. We wrote Mach-Zehnder type waveguides having a width of 8 $$mu$$m on the PMMA layer by PBW with a beam size of $$sim$$1 $$mu$$m and a beam current of 50 pA. After this writing, the 10-$$mu$$m-thick-PMMA layer was deposited again as an upper-cladding layer by spin-coating. In the observation of these waveguides, the light of laser of 1550-nm wavelength was injected into one side of the waveguide through a single-mode fiber. From the observation of the light emitted from the opposite side of the waveguides, near field patterns was observed using a vidicon camera with an optical microscope. The observation result demonstrated that the light traveled by single mode in the Mach-Zehnder type polymer waveguide. In the conference, we will report the development of the Mach-Zehnder type polymer waveguide in detail. In addition, the thermo-optic switch at the wavelength of 1550 nm by the Mach-Zehnder type polymer waveguide will also be briefly reported.

論文

Tilted-foil technique for producing a spin-polarized radioactive isotope beam

平山 賀一*; 三原 基嗣*; 渡辺 裕*; Jeong, S. C.*; 宮武 宇也*; 百田 佐多夫*; 橋本 尚志*; 今井 伸明*; 松多 健策*; 石山 博恒*; et al.

European Physical Journal A, 48(5), p.54_1 - 54_10, 2012/05

 被引用回数:2 パーセンタイル:16.84(Physics, Nuclear)

The tilted-foil method for producing spin-polarized radioactive isotope beams has been studied for the application to nuclear physics and materials science, using the radioactive nucleus $$^8$$Li produced at the Tokai Radioactive Ion Accelerator Complex (TRIAC). We successfully produced polarization in a $$^8$$Li beam using 15 thin polystyrene foils fabricated especially for this purpose. A systematic study of the nuclear polarization as a function of the number of foils, beam energy, tilt angles and foil material has been performed, confirming the features of the tilted-foil technique experimentally. The contributions made to the nuclear polarization of $$^8$$Li nuclei by the atomic states was investigated.

論文

Fabrication of Y-junction waveguides using proton beam writing

三浦 健太*; 佐藤 隆博; 石井 保行; 江夏 昌志; 上原 政人*; 桐生 弘武*; 高野 勝昌*; 大久保 猛; 山崎 明義; 加田 渉; et al.

JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 126, 2012/01

We develop optical waveguides using Proton Beam Writing (PBW). In this study, Y-junction PMMA film waveguides at 1.55 $$mu$$m were fabricated using PBW. First, an SiO$$_2$$ film was deposited as an under-cladding on an Si substrate using radio-frequency sputtering. After a PMMA film was spin-coated on the SiO$$_2$$ film, the sample was baked at 120 $$^{circ}$$C. The thickness of PMMA film became 10 $$mu$$m by repeating these processes twice. Next, a Y-junction waveguides with the width of 8 $$mu$$m and branching angle of 2 $$^circ$$ were drawn in the PMMA film on the condition of the dose of 100 nC/mm$$^2$$ using PBW having a 1.7 MeV proton beam with the current of 10 pA and the size of about 1 $$mu$$m. Finally, a 10-$$mu$$m thick PMMA film was deposited again on the sample as an upper-cladding layer by spin-coating. The observation of an optical microscope showed that an objective Y-junction was successfully drawn using PBW. To observe near field patterns (NFPs), the laser light of wavelength at 1.55 $$mu$$n was injected through a single-mode fiber (SMF) from one side of the edge of the waveguide cleaved both sides of the sample. The two independent NFPs were observed form each branching waveguide using a vidicon camera at the opposite side of the waveguide. The observation result of the two NFPs with an optical power intensity ratio of 1:0.98 demonstrated that the light of 1.55 $$mu$$m was divided at almost equal ratio by this Y-junction.

論文

Fabrication of polymer optical waveguides for the 1.5-$$mu$$m band using focused proton beam

三浦 健太*; 町田 裕貴*; 上原 政人*; 桐生 弘武*; 小澤 優介*; 佐々木 友之*; 花泉 修*; 佐藤 隆博; 石井 保行; 江夏 昌志; et al.

Key Engineering Materials, 497, p.147 - 150, 2012/00

 被引用回数:7 パーセンタイル:95.17

Proton beam writing (PBW) is an attractive technique for next-generation micro-fabrication. We study the fabrication of optical waveguides of polymer materials using PBW. In this study, the optical waveguides of photorefractive polysilane "GLASSIA" was fabricated. The samples for the waveguides were prepared as follows; (1) An under-cladding layer of SiO$$_2$$ having a thickness of $$sim$$15 $$mu$$m was deposited on a Si substrate using radio-frequency sputtering. (2) A polysilane layer having a thickness of $$sim$$10 $$mu$$m was spin-coated onto the SiO$$_2$$ layer as a core layer. Optical waveguides were drawn by scanning a 1.7 MeV focused proton beam with $$sim$$1 $$mu$$m size and beam current of 50 pA which was produced by a submicron focused ion beam system connected with the 3 MV single-ended accelerator at JAEA. The drawing was carried out on the dose of 100, 200, 300 nC/mm$$^2$$ each. After the drawing, the sample surfaces were observed using an optical microscope and AFM. The observation result showed that the refractive index was changed and the cores of the waveguides were formed. We will report the details of above observation results in the conference. The change ratio of the refraction index will also be reported on the basis of the obtained result by inserting light ($$lambda$$ = 1.55 $$mu$$m) into the waveguide structure through a single-mode fiber.

論文

Fabrication of polymer optical waveguides for the 1.5-$$mu$$m band using focused proton beam

三浦 健太*; 町田 裕貴*; 上原 政人*; 桐生 弘武*; 小澤 優介*; 佐々木 友之*; 花泉 修*; 佐藤 隆博; 石井 保行; 江夏 昌志; et al.

Key Engineering Materials, 497, p.147 - 150, 2011/12

 被引用回数:6 パーセンタイル:2.48

Single mode straight waveguides for a wavelength of 1.55-$$mu$$m were, so far, fabricated using a proton beam writing (PBW) technique. We report the fabrication of Y-junction polymer waveguides with a polymethyl methacralate (PMMA) layers as the expansion of these straight waveguides using PBW in the conference. The PMMA layers consisted of an under-cladding layer of SiO$$_2$$ having a thickness of $$sim$$ 15-$$mu$$m deposited on an Si substrate, a PMMA layer having a thickness of $$sim$$ 10-$$mu$$m spin-coated onto the SiO$$_2$$ layer and a Y-junction waveguide with a width of 8-$$mu$$m in a PMMA core layer. The Y-junction waveguides with the angle of 2$$^{circ}$$ were drawn using the 1.7 MeV proton beam with 1-$$mu$$m in diameter and a beam current of 10 pA for a dose of 100 nC/mm$$^2$$. After spin-coating the PMMA layer with $$sim$$ 10-$$mu$$m thickness as an upper cladding on the irradiated PMMA layer, the near field pattern (NFP) of an 8-$$mu$$m-width Y-junction waveguide was observed using a tunable-wavelength laser. The observation showed that the fabrication of waveguide was succeeded because its waveguide was single mode and the intensity ratio between the two outputted lights was the almost same; 1:0.96. We also briefly report the next plans of the measurement of the refractive indices of proton-irradiated PMMA and SiO$$_2$$ films and the fabrication of a thermo-optic polymer switch based on a Mach-Zehnder interferometer waveguide.

報告書

結晶質岩を対象とした坑道掘削における湧水抑制対策の計画策定と施工結果に関する考察

見掛 信一郎; 山本 勝; 池田 幸喜; 杉原 弘造; 竹内 真司; 早野 明; 佐藤 稔紀; 武田 信一; 石井 洋司; 石田 英明; et al.

JAEA-Technology 2010-026, 146 Pages, 2010/08

JAEA-Technology-2010-026.pdf:41.08MB
JAEA-Technology-2010-026-appendix(CD-ROM).zip:83.37MB

現在、瑞浪超深地層研究所において進めている研究坑道掘削工事では、坑道掘削に先立ちボーリング調査を行い、掘削範囲の地質や地下水状況を把握したうえで坑道を掘削している。調査の結果、深度200m付近の換気立坑側や深度300m研究アクセス坑道で大量湧水が発生する可能性が高いことがわかった。このため坑道掘削時の湧水を抑制する技術として、坑道掘削に先立ち掘削範囲周辺の割れ目にセメントを注入する工法(プレグラウチング)を行った。本報告書は、プレグラウチングの計画と実施過程で得られた技術的知見を取りまとめたものである。

論文

ERL超伝導加速空胴での空洞診断装置の開発

阪井 寛志*; 梅森 健成*; 高橋 毅*; 古屋 貴章*; 篠江 憲治*; 石井 篤*; 沢村 勝; 武藤 俊哉*

Proceedings of 7th Annual Meeting of Particle Accelerator Society of Japan (DVD-ROM), p.173 - 176, 2010/08

エネルギー回収型リニアックのための超伝導加速器を開発している。空洞表面の電子放出や発熱スポットを詳しく調べるために回転マッピング方式による空洞診断系を用いている。カーボン抵抗とPINフォトダイオードの2種類のセンサーによって温度上昇と電子放出を検知している。これらのセンサー群を空洞軸を中心に回転させることにより空洞表面の全体に渡る詳細な情報が得られる。この回転マッピングシステムを使って単セル空洞と9セル空洞の縦測定を行った結果を報告する。

論文

Beam fast extraction tuning of the J-PARC main ring

Wei, G.; 小関 忠*; 冨澤 正人*; 五十嵐 進*; 石井 恒次*; 安東 愛之輔; 高野 淳平*; 魚田 雅彦*; Fan, K.*; 畠山 衆一郎; et al.

Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.3918 - 3920, 2010/05

The beam commissioning of J-PARC/MR has been started from May 2008 and is in good progress. One key purpose of MR commissioning is the 30 GeV beam fast extraction to neutrino beam line, which reflect the overall commissioning result. In the MR, fast extraction system comprises 5 kickers and 8 septa which give a bipolar kick to neutrino beam line or abort dump. However before commissioning, the measured magnetic field distribution of each fast extraction septa shows non-linear profile along the horizontal direction. In order to find the influence, a beam simulation with the measured field distributions of septa has been performed. Depends on this study and some OPI (Operation Interface) made by code SAD for orbit modification online, fast extraction of 30 GeV beam to neutrino beam line has been achieved on April 23rd 2009. And so far, 100 kW continual operation to neutrino line have been achieved, too.

論文

Soft-error rate in a logic LSI estimated from SET pulse-width measurements

牧野 高紘; 小林 大輔*; 廣瀬 和之*; 高橋 大輔*; 石井 茂*; 草野 将樹*; 小野田 忍; 平尾 敏雄; 大島 武

IEEE Transactions on Nuclear Science, 56(6), p.3180 - 3184, 2009/12

 被引用回数:13 パーセンタイル:64.85(Engineering, Electrical & Electronic)

論理LSIにおける放射線起因のソフトエラー率を、放射線によって論理LSIを構成する論理素子内に誘起されるシングルイベントトランジェント(SET)電圧パルス幅の測定結果より推定した。実験には0.2-$$mu$$m FD-SOI(Fully Depleted Silicon on Insulator)技術を用いたNOT回路又はNOR回路を用い、322MeV Krイオン照射により得られたSETパルス幅の実測を行った。測定結果と回路構成を考慮した理論解析を用い論理LSIにおけるソフトエラー率を推定した。その結果、論理LSIにおける放射線起因のソフトエラー率を直接測定した結果と一致し、本手法の妥当性を検証できた。

論文

Plasma rotation effects on magnetic island formation and the trigger of disruptions in reversed shear plasma

石井 康友; Smolyakov, A. I.*; 武智 学

Nuclear Fusion, 49(8), p.085006_1 - 085006_10, 2009/08

 被引用回数:26 パーセンタイル:69.93(Physics, Fluids & Plasmas)

反転磁気シアプラズマは高性能トカマクプラズマを生成するための有力なプラズマ配位の1つであるが、低プラズマ圧力領域でのディスラプション発生確率が高く、このようなディスラプションの機構解明と回避手法の開発が緊急の研究課題である。本論文では、プラズマ回転効果を含む自発的DTM,外部駆動型DTMの非線形MHDシミュレーションを行うことにより、内外共鳴面で観測される揺動の差異を説明する物理モデルを構築するとともに、外部揺動による低圧力ディスラプションのトリガー機構を解明した。また、強い回転シアにより、自発的及び外部駆動型DTMの非線形不安定化が抑制できることを明らかにした。

論文

LET dependence of single event transient pulse-widths in SOI logic cell

牧野 高紘*; 小林 大輔*; 廣瀬 和之*; 柳川 善光*; 齋藤 宏文*; 池田 博一*; 高橋 大輔*; 石井 茂*; 草野 将樹*; 小野田 忍; et al.

IEEE Transactions on Nuclear Science, 56(1), p.202 - 207, 2009/02

 被引用回数:35 パーセンタイル:90.72(Engineering, Electrical & Electronic)

SET(Single Event Transient)パルス幅と線エネルギー付与(LET)との関係を求めるために、高い放射線耐性を持つSOI(Silicon on Insulator)基板上に試作したテストチップを用いてSETパルス幅のLET依存性を評価した。Kr322MeVとXe454MeVのイオンをテストチップに垂直又は45度で照射した。その結果、垂直入射の場合、LETの増加に対してSETパルス幅が直線的に増加し、45度の場合、LETの増加に対してSETパルス幅が飽和傾向を示すことがわかった。この飽和傾向を示す主な要因を調べるために3次元デバイスシミュレーター(TCAD)による解析を行った。その結果、重イオンによって誘起する過剰キャリアの再結合が飽和傾向を説明する一つの要因であることがわかった。

100 件中 1件目~20件目を表示