検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 6 件中 1件目~6件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Development of cryogenic tensile testing apparatus for lattice strain measurement using synchrotron radiation for REBCO composite conductors

菅野 未知央*; 町屋 修太郎*; 菖蒲 敬久; 城 鮎美*; 梶原 堅太郎*; 中本 達志*

Superconductor Science and Technology, 33(8), p.085003_1 - 085003_10, 2020/08

 被引用回数:4 パーセンタイル:27.19(Physics, Applied)

REBa$$_{2}$$Cu$$_{3}$$O$$_{7}$$-delta (REBCO) composite tapes are candidate conductors for future accelerator magnets. Given that REBCO is a brittle oxide film, stress/strain management is important in the mechanical design of a magnet. Therefore, the strain state of a superconducting film should be predicted under various operating conditions. A quantum beam is a useful tool in evaluating the strain state of a superconducting material in a composite conductor. Although various cryogenic tensile testing machines, in combination with neutron beam and synchrotron radiation, have been developed, they are not necessarily optimized for measuring highly textured materials such as REBCO films. This study reports a novel cryogenic tensile testing apparatus that can be used at the beamline of a synchrotron radiation facility. In this system, a superconducting tape is cooled using a Gifford-McMahon (GM) cryocooler through 2.5 m long thermal links made of 5 N high-purity aluminum. This enables a compact cryogenic loading system that can be mounted on the goniometer of a beamline. Lattice strain measurements using synchrotron radiation were conducted at 40 K, 77 K, and 300 K for a commercially available (Y,Gd)BCO coated conductor at BL28B2 in SPring-8. The onset strain of film fracture determined from the lattice strain measurement at 77 K agreed well with the irreversible strain of critical current at the same temperature. The residual and fracture strain of the (Y,Gd)BCO film at 77 K was evaluated as well.

論文

New precise measurement of muonium hyperfine structure interval at J-PARC

上野 恭裕*; 青木 正治*; 深尾 祥紀*; 東 芳隆*; 樋口 嵩*; 飯沼 裕美*; 池戸 豊*; 石田 勝彦*; 伊藤 孝; 岩崎 雅彦*; et al.

Hyperfine Interactions, 238(1), p.14_1 - 14_6, 2017/11

 被引用回数:3 パーセンタイル:86.59

MuSEUM is an international collaboration aiming at a new precise measurement of the muonium hyperfine structure at J-PARC (Japan Proton Accelerator Research Complex). Utilizing its intense pulsed muon beam, we expect a ten-fold improvement for both measurements at high magnetic field and zero magnetic field. We have developed a sophisticated monitoring system, including a beam profile monitor to measure the 3D distribution of muonium atoms to suppress the systematic uncertainty.

論文

New muonium HFS measurements at J-PARC/MUSE

Strasser, P.*; 青木 正治*; 深尾 祥紀*; 東 芳隆*; 樋口 嵩*; 飯沼 裕美*; 池戸 豊*; 石田 勝彦*; 伊藤 孝; 岩崎 雅彦*; et al.

Hyperfine Interactions, 237(1), p.124_1 - 124_9, 2016/12

 被引用回数:7 パーセンタイル:91.29

At the Muon Science Facility (MUSE) of J-PARC (Japan Proton Accelerator Research Complex), the MuSEUM collaboration is planning new measurements of the ground state hyperfine structure (HFS) of muonium both at zero field and at high magnetic field. The previous measurements were performed both at LAMPF (Los Alamos Meson Physics Facility) with experimental uncertainties mostly dominated by statistical errors. The new high intensity muon beam that will soon be available at MUSE H-Line will provide an opportunity to improve the precision of these measurements by one order of magnitude. An overview of the different aspects of these new muonium HFS measurements, the current status of the preparation, and the results of a first commissioning test experiment at zero field are presented.

論文

Model magnet development of D1 beam separation dipole for the HL-LHC upgrade

中本 建志*; 菅野 未知央*; Xu, Q.*; 川又 弘史*; 榎本 瞬*; 東 憲男*; 出崎 亮; 飯尾 雅実*; Ikemoto, Yukio*; 岩崎 るり*; et al.

IEEE Transactions on Applied Superconductivity, 25(3), p.4000505_1 - 4000505_5, 2015/06

 被引用回数:0 パーセンタイル:0(Engineering, Electrical & Electronic)

近年、大強度加速器施設におけるビーム高強度化を実現するため、強い放射線環境下で安定に高磁場を形成可能な超伝導磁石システムが求められている。本研究では、大型ハドロン衝突型加速器(Large Hadron Collider: LHC)の高輝度化アップグレード計画において、数十MGy級の耐放射線性を有するビーム分離用双極超伝導磁石システム(D1システム)を開発することを目指している。このシステムには超伝導材料や電気絶縁材料が用いられるが、電気絶縁材料にはコイル線材間の隙間を埋める成形性と十分な耐放射線性が要求される。我々は高い成形性、放射線照射時の低分解ガス生成能と高強度維持を実現したガラス繊維強化ビスマレイミドトリアジン(BT)樹脂を開発した。従来のガラス繊維強化エポキシ(G10)樹脂の場合、10MGyの$$gamma$$線照射後、4$$times$$10$$^{-5}$$mol/gのガスが発生し、曲げ強度が初期値の60%である280MPaまで低下したのに対し、BTでは100MGyの$$gamma$$線照射後、5$$times$$10$$^{-5}$$mol/gのガス発生量と初期値の90%である640MPaの曲げ強度を示した。今後、NbTi系超伝導線材の開発と磁石デザインを行ない、D1システム用モデル磁石を製作する予定である。

口頭

低温変形中のその場中性子回折の開発

Harjo, S.; 岩橋 孝明; 阿部 淳; 辺見 努; 相澤 一也; 中本 建志*; Jin, X.*; 菅野 未知央*

no journal, , 

中性子はその大きな透過能力のため結晶材料内部の応力・ひずみを回折法で測定するには非常に有効で、材料のさまざまな工学的特性を調べるために最近よく用いられる。現在までに、機械や構造物の部品内の残留ひずみ分布の測定,静的微小組織測定,静的集合組織等のためにほとんど使われている。一方、材料開発においては、さまざまな環境でのその場測定を必要としている。本発表では、J-PARC物質・生命科学実験施設(MLF)工学材料回折装置「匠」での実験のために開発した低温引張試験機及びSUS304を用いたテスト実験結果を報告する。

口頭

放射光ひずみ測定のための低温引張システムの開発

菅野 未知央*; 町屋 修太郎*; 菖蒲 敬久; 城 鮎美; 中本 建志*

no journal, , 

低温引張システムを開発し、SPring-8において超伝導線材の初めての低温引張試験を実施した。2m長の高純度アルミ可とう導体を用いた伝導冷却により、引張装置部分を小型、軽量化しつつ、試料部を25Kまで冷却できることを確認した。さらに、放射光を用いたREBCO線材の低温引張ひずみ測定にも成功した。

6 件中 1件目~6件目を表示
  • 1