Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
neutron diffraction revealing the achievement of excellent combination of strength and ductility in metastable austenitic steel by grain refinementMao, W.; Gong, W.; Harjo, S.; 諸岡 聡; Gao, S.*; 川崎 卓郎; 辻 伸泰*
Journal of Materials Science & Technology, 176, p.69 - 82, 2024/03
被引用回数：0 パーセンタイル：0(Materials Science, Multidisciplinary)Fe-24Ni-0.3C(wt.%)準安定オーステナイト鋼の降伏応力は、平均結晶粒径が35
m(粗粒[CG])から0.5m(超微細粒[UFG])に減少すると3.5倍(158
551MPa)に増加したが、引張伸びは大きく維持された(0.870.82)。結晶粒径が力学特性と変形機構に及ぼす影響を定量的に明らかにするため、室温での引張変形中にCGとUFG Fe-24Ni-0.3C鋼のその場中性子回折測定を行った。CGとUFG試料における塑性変形の初期段階は転位すべりによって支配され、変形後期には変形誘起マルテンサイト変態(DIMT)も生じた。結晶粒の微細化により、DIMTの開始応力が大きく増加し、ひずみに関するDIMTの速度が抑制されることがわかった。結果として、(i)結晶粒微細化によりオー ステナイトが安定化し、DIMTに対して最も安定な結晶粒である
111
//LD(LD:負荷方向)オーステナイト粒でのDIMTの開始が大幅に遅れた。その結果、UFG試験片の111//LDオーステナイト粒のほとんどはマルテンサイトに変態しなかった。(ii)結晶粒の微細化は、マルテンサイト変態の自己促進効果も抑制した。それにもかかわらず、UFG試験片の変態速度が低いDIMTは、CG試験片のより応力を増加させるのに効率がよく、変形中に均一な変形を維持するのに適していた。以上の現象は、UFG準安定オーステナイト鋼の優れた強度と延性の両立に相互に寄与している。
ders band deformation in an ultrafine grain stainless steel by combining 
neutron diffraction and digital image correlation analysisMao, W.; Gao, S.*; Gong, W.; Harjo, S.; 川崎 卓郎; 辻 伸泰*
Scripta Materialia, 235, p.115642_1 - 115642_6, 2023/10
被引用回数：1 パーセンタイル：0(Nanoscience & Nanotechnology)本研究では、巨大なリューダースバンド変形を示す超微細粒(UFG)ステンレス鋼の引張その場中性子回折とデジタル画像相関測定を行い、バンド伝播中の歪硬化に対するオーステナイト母相と変形誘起マルテンサイトの個々の寄与を評価した。定量的解析の結果、UFG構造によって流動応力が大幅に増加した場合、オーステナイト母相のひずみ硬化は均一な変形を維持するには不十分であることがわかった。リューダースバンドの伝播に必要なひずみ硬化は、マルテンサイトの形成とその内部の高い内部応力によってもたらされた。
titanium alloys strong and ductileChong, Y.*; Gholizadeh, R.*; Guo, B.*; 都留 智仁; Zhao, G.*; 吉田 周平*; 光原 昌寿*; Godfrey, A.*; 辻 伸泰*
Acta Materialia, 257, p.119165_1 - 119165_14, 2023/09
被引用回数：4 パーセンタイル：84.87(Materials Science, Multidisciplinary)チタン合金は、優れた歪み硬化能を有する反面、降伏強度が低いという問題を抱えている。ここでは、Ti-12Mo(wt.%)準安定チタン合金の降伏強度の向上における結晶粒の微細化と格子間物質の添加の寄与について検討した。その結果、結晶粒の微細化は材料を強化するどころか、この合金の極限引張強度を低下させることがわかった。この予想外の異常な挙動は、ひずみ誘起
マルテンサイト相変態が著しく促進されたことに起因しており、その場観察放射光X線回折分析により、この相が相よりはるかに軟らかいことが初めて明らかになった。また、酸素添加と結晶粒微細化の組み合わせにより、Ti-12Mo-0.3O(wt.%)合金において前例のない強度と延性の相乗効果が得られることが判明した。この三元合金における酸素溶質には2つの有利な点がある。第一に、溶質酸素は、微細な組織においても、歪みによるマルテンサイト相への変態を大きく抑制し、過剰なマルテンサイトによる軟化効果を回避することができる。次に、アトムプローブトモグラフィーで明らかになったように、酸素溶質が双晶境界に偏析しやすい。これにより、
変形双晶の成長が抑制され、より広範な双晶の核生成が促進される。本研究で得られた知見は、強靭な準安定チタン合金を設計するための費用対効果の高い根拠となり、この高強度対重量構造材料のさらなる普及に大きな意味を持つ。
Mao, W.; Gao, S.*; Gong, W.; Bai, Y.*; Harjo, S.; Park, M.-H.*; 柴田 曉伸*; 辻 伸泰*
Acta Materialia, 256, p.119139_1 - 119139_16, 2023/09
被引用回数：5 パーセンタイル：90.35(Materials Science, Multidisciplinary)変形誘起塑性(TRIP)鋼は、変形誘起マルテンサイト変態(DIMT)に伴う加工硬化率の向上により、強度と延性の優れた組み合わせを示す。TRIP鋼や合金の加工硬化挙動におけるDIMTの役割を定量的に評価することは、強度と延性の両立を可能にする先進材料を設計するための指針を与えるが、変形中に相組成が変化し続け、応力と塑性ひずみの両方が構成相間で動的に分配されるため、その評価は困難である。本研究では、Fe-24Ni-0.3C(wt.%)TRIPオーステナイト鋼の引張変形とその場中性子回折測定を行った。中性子回折測定による応力分割と相分割に基づく解析手法を提案し、試験片の引張流動応力と加工硬化率を、オーステナイト母相,変形誘起マルテンサイト、DIMT変態速度に関連する因子に分解し、試料の加工硬化挙動における各因子の役割を考察した。さらに、回折プロファイル解析により測定した転位密度を用いてオーステナイトとマルテンサイト間の塑性ひずみ分配を間接的に推定し、材料中のオーステナイトとマルテンサイト間の応力・ひずみ分配の全体像を構築した。その結果、変形誘起マルテンサイト変態速度とマルテンサイトが負担する相応力の両方が、材料の全体的な引張特性に重要な役割を果たしていることが示唆された。提案した分解解析法は、TRIP現象を示す多相合金の機械的挙動を調べるために広く適用できる可能性がある。
neutron diffractionGong, W.; Harjo, S.; 友田 陽*; 諸岡 聡; 川崎 卓郎; 柴田 曉伸*; 辻 伸泰*
Acta Materialia, 250, p.118860_1 - 118860_16, 2023/05
被引用回数：2 パーセンタイル：74.65(Materials Science, Multidisciplinary)Martensitic transformation is accompanied by the generation of microscale and macroscale internal stresses during cooling below the martensitic transformation start temperature. These internal stresses have been determined through X-ray or neutron diffraction, but the reported results are not consistent, probably because the measured lattice parameter is influenced not only by the internal stress but also by several factors, including solute elements and crystal defects. Therefore, neutron diffraction combined with dilatometry measurements during martensitic transformation and subsequent cyclic tempering were performed for an Fe-18Ni alloy. The phase strains calculated by lattice parameter variations show that a hydrostatic compressive strain in austenite and a tensile strain in martensite arose as the martensitic transformation progressed during continuous cooling or isothermal holding. However, the phase stresses of austenite and martensite estimated from these strains failed to hold stress balance law when dense crystal defects involved in the processes. After these crystal defects were removed by appropriate tempering, the stress balance law held well. Meanwhile, the phase stresses of austenite and martensite were changed to opposite, revealing their true identity. Various crystal defects in austenite and martensite, introduced by plastic accommodation, were suggested to affect their lattice parameters and then their phase stresses.
neutron diffraction studyGong, W.; 川崎 卓郎; Zheng, R.*; 眞山 剛*; Sun, B.*; 相澤 一也; Harjo, S.; 辻 伸泰*
Scripta Materialia, 225, p.115161_1 - 115161_5, 2023/03
被引用回数：4 パーセンタイル：45.58(Nanoscience & Nanotechnology)Deformation behavior during uniaxial compression at 21 K and 298 K in a commercial AZ31 magnesium alloy was studied by neutron diffraction. Decreasing the deformation temperature resulted in a slight increase in yield stress (115 MPa 139 MPa), but a remarkable enhancement in both the fracture stress (365 MPa 551 MPa) and fracture strain (12.8% 16.5%). The low temperature sensitivity of the {10
2} extension twinning which governed the macroscopic yielding led to the slight increase in yield stress. At 21K, basal slip was suppressed, while the extension twinning was promoted resulted in higher twin volume fraction. In the late stage of deformation, the {101}-{102} double twinning was suppressed, which is considered to be the reason to delay the fracture at 21 K.
Chong, Y.*; Gholizadeh, R.*; 都留 智仁; Zhang, R.*; 井上 耕治*; Gao, W.*; Godfrey, A.*; 光原 昌寿*; Morris, J. W. Jr.*; Minor, A. M.*; et al.
Nature Communications (Internet), 14, p.404_1 - 404_11, 2023/02
被引用回数：6 パーセンタイル：93.59(Multidisciplinary Sciences)チタンは格子間酸素によって脆化する。特に極低温では顕著な脆化挙動を示すため、チタンやその合金の製造において酸素含有量を厳しく管理する必要がある。この問題を解決するために、我々は結晶粒の微細化という構造戦略を提案した。77Kで非常に脆い粗粒の組織と比較して、Ti-0.3wt.%Oの超微細粒(UFG)組織(粒径
2.0m)は、UFG組織特有の超高降伏強度を維持したまま均一延びを1桁上昇させることに成功した。UFG Ti-0.3wt.%Oにおけるこの特異な強度-延性相乗効果は、粒界凝集エネルギー向上に寄与する希薄な酸素の粒界偏析と優れたひずみ硬化能に寄与する
転位の活性化の複合効果によって達成された。この方法は、低温での高強度Ti-O合金の応用の可能性を高めるだけでなく、格子間固溶硬化による延性の低下を生じる他の合金系にも適用できる可能性がある。
phase to phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformationGuo, B.*; Mao, W.; Chong, Y.*; 柴田 曉伸*; Harjo, S.; Gong, W.; Chen, H.*; Jonas, J. J.*; 辻 伸泰*
Acta Materialia, 242, p.118427_1 - 118427_11, 2023/01
被引用回数：5 パーセンタイル：64.46(Materials Science, Multidisciplinary)Dynamic transformation from alpha (HCP) to beta (BCC) phase in a zirconium alloy was revealed by the use of in-situ neutron diffraction during hot compression. The dynamic transformation was unexpectedly detected during isothermal compression at temperatures of 900
C and 950C (alpha + beta two-phase region) and strain rates of 0.01 s
and 0.001 s, even though equilibrium two-phase states were achieved prior to the hot compression. Dynamic transformation was accompanied by diffusion of Sn from beta to alpha phase, which resulted in changes of lattice parameters and a characteristic microstructure of alpha grains. The details of dynamic transformation are discussed using the evolution of lattice constants.
observation of twinning and detwinning in AZ31 alloyGong, W.; Zheng, R.*; Harjo, S.; 川崎 卓郎; 相澤 一也; 辻 伸泰*
Journal of Magnesium and Alloys (Internet), 10(12), p.3418 - 3432, 2022/12
被引用回数：17 パーセンタイル：93.62(Metallurgy & Metallurgical Engineering)Twinning and detwinning behavior of a commercial AZ31 magnesium alloy during cyclic compression-tension deformation with a total strain amplitude of 4% (
2%) was evaluated using the complementary techniques of neutron diffraction, identical area electron backscatter diffraction, and transmission electron microscopy. In-situ neutron diffraction demonstrates that the compressive deformation was dominated by twin nucleation, twin growth, and basal slip, while detwinning dominated the unloading of compressive stresses and subsequent tension stage. A large number of 
-component dislocations observed in twins and the detwinned regions were attributed to the dislocation transmutation during the twinning and detwinning. The accumulation of barriers including twin boundaries and various types of dislocations enhanced the interactions of migrating twin boundary with these barriers during twinning and detwinning, which is considered to be the origin for increasing the work hardening rate in cyclic deformation of the AZ31 alloy.
Chong, Y.*; 都留 智仁; Guo, B.*; Gholizadeh, R.*; 井上 耕治*; 辻 伸泰*
Acta Materialia, 240, p.118356_1 - 118356_15, 2022/11
被引用回数：15 パーセンタイル：92.67(Materials Science, Multidisciplinary)本研究では、室温でのチタンの引張特性と変形挙動に及ぼす窒素含有量と結晶粒径の影響を体系的に調査した。巨大ひずみ加工と焼鈍により、超高降伏強度(1.04GPa)と大きな均一伸び(10%)の前例のない相乗効果を組み合わせた、完全再結晶微細構造を備えた超微細粒(UFG)Ti-0.3wt.%N合金が得られた。Ti-0.3wt.%N合金の硬化およびひずみ硬化メカニズムは、変形下部構造の観察と第一原理計算によって包括的に研究された。UFG Ti-0.3wt.%Nの優れた強度/延性バランスへの窒素の寄与は2倍であることが明らかになった。粒子内の窒素原子は、八面体から六面体のサイトへの窒素のシャッフルにより、角柱面上の
転位の運動を強く妨げ、純Tiの6倍の摩擦応力の増加を引き起こした。さらに、Ti-0.3wt.%N合金の柱面と錐面の間の積層欠陥エネルギー差が大幅に減少することで、転位の活性化が容易になり、ひずみ硬化率の向上に寄与した。我々の実験的および理論的計算研究は、延性を大幅に犠牲にすることなく手頃な価格の高強度チタンの設計に関する知見を与える。
neutron diffraction and electron microscopy studyZheng, R.*; Gong, W.; Du, J.-P.*; Gao, S.*; Liu, M.*; Li, G.*; 川崎 卓郎; Harjo, S.; Ma, C.*; 尾方 成信*; et al.
Acta Materialia, 238, p.118243_1 - 118243_15, 2022/10
被引用回数：17 パーセンタイル：93.62(Materials Science, Multidisciplinary)Grain refinement can lead to the strengthening of metallic materials according to the Hall-Petch relationship. However, our recent results suggested that grain boundary sliding is the dominant deformation mode in bulk ultrafine grained (UFG) pure Mg at room temperature, leading to softening. Here, for the first time, we report that the Hall-Petch strengthening can be regained in bulk UFG pure Mg at cryogenic temperature. At 77K, the UFG pure Mg with a mean grain size of 0.6 m exhibited ultrahigh tensile yield strength and ultimate tensile strength of 309 MPa and 380 MPa, respectively. Combined neutron diffraction and electron microscopy investigation indicated that residual dislocation structures and deformation twins hardly formed in the UFG specimen during tensile test at 298K. In contrast, fast accumulation of lattice defects and remarkable reorientation were evident at 77K, suggesting that the grain-boundary-mediated process was suppressed and the plastic deformation was dominated by dislocation slip and deformation twinning. In addition, all the pure Mg specimens exhibited pronounced strain hardening at 77 K, which was mainly attributed to the suppressed grain boundary sliding and dynamic recovery. The mean dislocation density and relative fractions of dislocations with various Burgers vectors of the UFG specimen deformed at 77K were determined quantitatively from neutron diffraction data.
吉田 周平*; Fu, R.*; Gong, W.; 池内 琢人*; Bai, Y.*; Feng, Z.*; Wu, G.*; 柴田 曉伸*; Hansen, N.*; Huang, X.*; et al.
IOP Conference Series; Materials Science and Engineering, 1249, p.012027_1 - 012027_6, 2022/08
被引用回数：0 パーセンタイル：0.83(Metallurgy & Metallurgical Engineering)This study revealed characteristics of the deformation behavior in high/medium entropy alloys (HEAs/MEAs) with face-centered cubic (FCC) structure. A Co
Ni
alloy and a Co
CrNi MEA having low and high friction stresses (fundamental resistance to dislocation glide in solid solutions), respectively, but similar in other properties, including their stacking fault energy and grain sizes, were compared. The MEA exhibited a higher yield strength and work-hardening ability than those in the CoNi alloy at room temperature. Deformation microstructures of the CoNi alloy were composed of coarse dislocation cells (DCs) in most grains, and a few deformation twins (DTs) formed in grains with tensile axis (TA) nearly parallel to 111. In the MEA, three microstructure types were found depending on the grain orientations: (1) fine DCs developed in TA//100-oriented grains; (2) planar dislocation structures (PDSs) formed in grains with other orientations; and (3) dense DTs adding to the PDSs developed in TA//111-oriented grains. The results imply difficulty in cross-slip of screw dislocations and dynamic recovery in the MEA, leading to an increase in the dislocation density and work-hardening rate. Our results suggest that FCC high-alloy systems with high friction stress inherently develop characteristic deformation microstructures advantageous for achieving high strength and large ductility.
Liu, M.*; Gong, W.; Zheng, R.*; Li, J.*; Zhang, Z.*; Gao, S.*; Ma, C.*; 辻 伸泰*
Acta Materialia, 226, p.117629_1 - 117629_13, 2022/03
被引用回数：45 パーセンタイル：99.49(Materials Science, Multidisciplinary)One hopeful path to realize good comprehensive mechanical properties in metallic materials is to accomplish homogeneous nanocrystalline (NC) or ultrafine grained (UFG) structure with low dislocation density. In this work, high pressure torsion deformation followed by appropriate annealing was performed on 316 stainless steel (SS). For the first time, we successfully obtained NC/UFG 316 SS having uniform microstructures with various average grain sizes ranging from 46 nm to 2.54 m and low dislocation densities. Among the series, an un-precedentedly high yield strength (2.34 GPa) was achieved at the smallest grain size of 46 nm, in which dislocation scarcity induced hardening accounting for 57% of the strength. On the other hand, exceptional strength-ductility synergy with high yield strength (900 MPa) and large uniform elongation (27%) was obtained in the fully recrystallized specimen having the grain size of 0.38 m. The high yield stress and scarcity of dislocation sources in recrystallized UFGs activated stacking faults and deformation twins nucleating from grain boundaries during straining, and their interaction with dislocations allowed for sustainable strain hardening, which also agreed with the plaston concept recently proposed. The multiple deformation modes activated, together with the effective strengthening mechanisms, were responsible for the outstanding comprehensive mechanical performance of the material.
Mao, W.; Gao, S.*; Bai, Y.*; Park, M.-H.*; 柴田 曉伸*; 辻 伸泰*
Journal of Materials Research and Technology, 17, p.2690 - 2700, 2022/03
被引用回数：9 パーセンタイル：83.6(Materials Science, Multidisciplinary)超微細結晶粒(UFG)組織を有する準安定オーステナイト鋼は、冷間圧延中の変形誘起マルテンサイト変態と焼鈍時のオーステナイトへの逆変態を利用することにより、従来の冷間圧延および焼鈍プロセスで製造することができる。しかし、変形誘起マルテンサイト変態に対するオーステナイトの機械的安定性が高い場合には、冷間圧延中に十分な量のマルテンサイトが生成しないため、このようなプロセスは適用できない。本研究では、高い機械的安定性を有するFe-24Ni-0.3C準安定オーステナイト鋼に対して、冷間圧延と焼鈍の2段階プロセスを適用した。冷間圧延に先立ち、繰り返しサブゼロ処理と逆焼鈍処理を施した。このような処理により、オーステナイトの機械的安定性が劇的に低下し、その後の冷間圧延工程で変形誘起マルテンサイトの生成が大幅に促進された。その結果、結晶粒の微細化が著しく促進され、平均オーステナイト粒径0.5mmの完全再結晶試験片の作製に成功し、高強度と高延性を両立させた。
岡田 和歩*; 柴田 曉伸*; Gong, W.; 辻 伸泰*
Acta Materialia, 225, p.117549_1 - 117549_13, 2022/02
被引用回数：15 パーセンタイル：93.62(Materials Science, Multidisciplinary)In this study, the deformation microstructure of hydrogen-charged ferritic-pearlitic 2Mn-0.1C steel was characterized using SEM-BSE, SEM-EBSD, TEM, and neutron diffraction. The microscopic mechanism of hydrogen-related quasi-cleavage fracture along the 
planes was also discussed. It was found that hydrogen increased the relative velocity of screw dislocations to edge dislocations, leading to a tangled dislocation morphology, even at the initial stage of deformation (strain = 0.03). In addition, the density of screw dislocations at the later stage of deformation (strain = 0.20) increased in the presence of hydrogen. Based on the experimental results, it is proposed that a high density of vacancies accumulated along slip planes by jog-dragging of screw dislocations, and coalescence of the accumulated vacancies led to the hydrogen-related quasi-cleavage fracture along the {011} slip planes.
neutron diffraction study on the deformation of a TRIP-assisted multi-phase steel composed of ferrite, austenite and martensiteLavakumar, A.*; Park, M. H.*; Gao, S.*; 柴田 曉伸*; 興津 貴隆*; Gong, W.; Harjo, S.; 辻 伸泰*
IOP Conference Series; Materials Science and Engineering, 580, p.012036_1 - 012036_6, 2019/09
被引用回数：3 パーセンタイル：83.68(Engineering, Mechanical)Multi-phase steels showing transformation induced plasticity (TRIP), can exhibit an excellent combination of high strength and good ductility by the aid of martensitic transformation during deformation. Even though TRIP-assisted multi-phase steels have been widely used in industry, the role of each phase in the enhancement of mechanical properties is still unclear given their complicated microstructures. In order to understand better the nature of the TRIP effect, the mechanical interaction between different phases at the micro-scale should be clarified. In the present study, the mechanical behavior of a transformation induced plasticity (TRIP) assisted multi-phase steel, has been characterized by neutron diffraction during tensile testing. The result of strain partitioning between the different phases obtained from the neutron analysis revealed that the martensite phase took much more elastic strain than the ferrite and retained austenite phases, which suggests that the work hardening behavior in the present steel is affected by the higher load borne by deformation-induced martensite.
neutron diffraction analysis during thermomechanical processing柴田 曉伸*; 竹田 泰成*; Park, N.*; Zhao, L.*; Harjo, S.; 川崎 卓郎; Gong, W.*; 辻 伸泰*
Scripta Materialia, 165, p.44 - 49, 2019/05
被引用回数：29 パーセンタイル：85.46(Nanoscience & Nanotechnology)Nowadays, a new concept of process utilizing dynamic ferrite transformation, which can achieve ultrafine-grained structure with a mean grain size of approximately 1m, has been proposed. This paper reports transformation mode of dynamic ferrite transformation and formation mechanism of ultrafine-grained structure revealed by our novel technique of neutron diffraction analysis during thermomechanical processing. Dynamic ferrite transformation occurs in a diffusional manner, whose partitioning behavior changes from para- to ortho-equilibrium with the progress of transformation. Moreover, we propose that dynamic recrystallization of dynamically-transformed ferrite is the main mechanism for the formation of ultrafine-grained structure.
中村 良彦*; 柴田 曉伸*; Gong, W.*; Harjo, S.; 川崎 卓郎; 伊東 篤志*; 辻 伸泰*
Proceedings of International Conference on Martensitic Transformations: Chicago, p.155 - 158, 2018/04
The microstructure evolution of medium manganese steel (Fe-5Mn-2Si-0.1C (wt%)) during thermo-mechanical processing in ferrite + austenite two-phase region was investigated by in situ neutron diffraction analysis and microstructure observations. When the specimens were isothermally held at a temperature of 700
C, the fraction of reversely transformed austenite increased gradually with an increase in the isothermal holding time. However, it did not reach the equilibrium fraction of austenite even after isothermal holding for 10 ks. On the other hand, the fraction of reversely transformed austenite increased rapidly after the compressive deformation at a strain rate of 1 s at 700C and reached the equilibrium state during subsequent isothermal holding for around 3 ks.
Harjo, S.; 柴田 曉伸*; Park, N.*; 川崎 卓郎; 大石 毅一郎*; 相澤 一也; 辻 伸泰*
no journal, ,
A new sample environmental device for simulating thermo-mechanical processes of materials (thermec-mastor) has been installed in a collaboration between a research group in Kyoto University and BL19 in MLF of J-PARC, within a scheme of Elements Strategy Initiative for Structural Materials supported by Ministry of Education, Culture, Sports, Science and Technology, Japan. This new device is designed to heat the specimens by induction heating and cool them by gas injection. The highest rates for heating and cooling are about 30 K/s. It can also apply compressive deformation with the highest rate of 100 mm/s. The basic design and the commissioning progress of the thermec-mastor will be briefly introduced together with the first neutron diffraction data on steels. At 300 kW accelerator operation, diffraction patterns sliced with the interval time of about 1 s could be used to determine the occurrence of phase transformation during thermo-mechanical processes.
Harjo, S.; 川崎 卓郎; 友田 陽*; 柴田 曉伸*; 辻 伸泰*; 相澤 一也
no journal, ,
Two topics done at TAKUMI of MLF, J-PARC are introduced. Evolutions of dislocation characteristics during tensile deformation in a lath martensitic steel have been possible to be monitored by applying the convolutional multiple whole profile (CMWP) fitting method, to understand the strengthening behavior of metallic material with extremely high dislocation density induced during the material preparation. This method is possible to be applied to understand the deformation behaviour of bulk nano materials. A new sample environmental device for simulating Thermo-Mechanical Controlling Process of materials (thermec-mastor) has been installed in a collaboration between a research group in Kyoto University and TAKUMI. This new device is designed to heat and cool a specimen rapidly, and to apply compression with a high strain rate. The basic design and the commissioning progress of the thermec-mastor will be briefly introduced together with the first neutron diffraction data on steels.
