Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
辻 明宏*; Zhang, S.*; 橋本 匡史*; 岡野 成威*; 菖蒲 敬久; 望月 正人*
材料, 65(9), p.665 - 671, 2016/09
本研究では、放射光を用いたin-situ計測技術を用い、SM490Aの溶接金属部における溶接時の過渡的な応力挙動や冷却時の相変態に起因した応力変化を実験的に評価した。その結果、接金属部の冷却過程におけるオーステナイトフェライト変態中の各相に加わる応力の変化挙動をそれぞれ独立して評価し、オーステナイトフェライト変態中にはオーステナイト相に引張応力が、フェライト相に圧縮応力が加わることを確認した。また、相変態開始直後と終了直前には体積比の小さいフェライト相とオーステナイト相にそれぞれ応力集中が生じ、高い引張応力が生じていることを明らかにした。
Zhang, S.; 菖蒲 敬久; 城 鮎美; 橋本 匡史*; 辻 明宏*; 岡野 成威*; 望月 正人*
no journal, ,
構造材料の強度や安全性に非常に影響を与えることが知られている溶接残留応力を制御するためには、残留応力が形成される溶接過程における温度履歴と組織,構造、そして応力を明らかにし、それをシミュレーションと対比する等の評価が必要不可欠である。本研究は、単色放射光X線回折を利用した、溶接過程における応力,固相変態などの結晶状態をその場測定し、冶金学的に溶接金属の応力及び固相変態挙動を明確にすることを目的とする。われわれはビード溶接の二方向応力が測定できるTIG溶接システムを開発し、二次元検出器システムと組合せて、スポット溶接直後連続冷却過程、フェライト相の格子定数、及び応力の時間変化を0.1秒の高時間分解能で取得することに成功した。
Zhang, S.; 菖蒲 敬久; 城 鮎美; 橋本 匡史*; 辻 明宏*; 岡野 成威*; 望月 正人*
no journal, ,
In the structural material, it is important to decrease the residual stress of the welded joints because residual stress generated by welding promotes brittle fracture, stress corrosion cracking. Mathematical model has been used to evaluate residual stresses around welding. In the welding simulation, the physical properties can be measured by thermal simulation experiments. However, it is difficult to simulate those residual stresses, because the welding process was quite complex. In order to resolve this problem, it is necessary to clarify physical properties such as stress, strain and thermal expansions during welding process. In this study, we has been developed an in-situ stress measurement system using synchrotron radiation X-rays at BL22XU at SPring-8. Residual stresses to the transverse and longitudinal distributions in the heat affected zone (HAZ) have been investigated with a time resolution of 0.1 seconds.