検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 3 件中 1件目~3件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Non-destructive examination of jacket sections for ITER central solenoid conductors

高橋 良和; 諏訪 友音; 名原 啓博; 尾関 秀将; 辺見 努; 布谷 嘉彦; 礒野 高明; 松井 邦浩; 河野 勝己; 押切 雅幸; et al.

IEEE Transactions on Applied Superconductivity, 25(3), p.4200904_1 - 4200904_4, 2015/06

 被引用回数:3 パーセンタイル:20.32(Engineering, Electrical & Electronic)

原子力機構はITER中心ソレノイド(CS)コイル用導体の調達を担当し、製作したCS導体をコイル製作担当の米国に送付することになっている。CSコイルは高さ約12m、外径約4mで、6個のモジュールを積み重ねた構造を有する。導体の単長は最大910mであり、通電電流値は13Tの磁場中において40kAである。導体はケーブル・イン・コンジット型と呼ばれるもので、576本のNb$$_{3}$$Sn素線と288本の銅素線で構成される撚線を、矩形の中に円形の穴がある高マンガン鋼(JK2LB)製ジャケットに挿入し、ジャケットを圧縮成型したものである。圧縮成型される前のジャケットは、外寸法51.3mm、穴の直径35.3mm、単長7m、重さ約90kgである。このジャケットは、出荷前に非破壊検査により、最大許容サイズの欠陥がないことを確認する必要がある。内及び外表面の欠陥は、渦電流探傷(ECT)法 で、内部の欠陥は、超音波探傷(UT)法で行われる。UTにおいて、矩形の中に円形の穴がある形状であるので、超音波の入射の方向を工夫する必要があった。表面のECT及び内部のUTについて、その技術と検査実績を報告する。

論文

Behavior of Nb$$_{3}$$Sn cable assembled with conduit for ITER central solenoid

名原 啓博; 諏訪 友音; 高橋 良和; 辺見 努; 梶谷 秀樹; 尾関 秀将; 櫻井 武尊; 井口 将秀; 布谷 嘉彦; 礒野 高明; et al.

IEEE Transactions on Applied Superconductivity, 25(3), p.4200305_1 - 4200305_5, 2015/06

 被引用回数:0 パーセンタイル:0(Engineering, Electrical & Electronic)

JAEA procures all superconductors for central solenoid (CS) in the ITER project. The cable is inserted into a conduit and compacted with it. During the insertion, the number of the rotation at the point ($$N_{p}$$) of the TF cable increased linearly to 50 against the inserted cable length ($$l_{i}$$). At first, $$N_{p}$$ of the CS cable also increased linearly by $$l_{i}$$ of 150 m. However, the increasing rate declined and the $$N_{p}$$ became constant to 30 at 600 m. During the compaction, the number of the rotation at the tail ($$N_{t}$$) of the CS cable increased linearly to 69 against the compacted cable length ($$l_{c}$$). It is important to measure not only $$N_{p}$$ but also $$N_{t}$$ because the rotation affects the twist pitch of the cable ($$l_{p}$$). After manufacturing the CS conductor, an X-ray transmission imaging made clear the $$l_{p}$$ along the whole length of the conductor for the first time. The $$l_{p}$$ peaked at the point; thus, a conductor sample should be taken there to investigate the effect of the $$l_{p}$$ elongation on the conductor performance.

口頭

CS撚線引き込み中のツイストピッチ分布

諏訪 友音; 名原 啓博; 高橋 良和; 押切 雅幸; 堤 史明; 渋谷 和幸*; 関口 信雄*; 松田 英光*

no journal, , 

ITERの超伝導マグネットは、Nb$$_{3}$$Sn素線を用いたケーブルインコンジット導体(CICC)を用いて製作される。CICC製作時にステンレスにNb$$_{3}$$Sn撚線を引き込むが、このとき、撚線が回転することで撚線の後端ではツイストピッチが短くなっていることがわかっている。撚線引き込み中のツイストピッチ変化の挙動を明らかにするために、Cu素線から成る中心ソレノイド撚線と同じ構造のダミー撚線を用いステンレス管への引き込みを行い、撚線引き込み中の長手方向のツイストピッチの分布を調べた。その結果、ツイストピッチは撚線先端の方が後端よりも大きく、先端から後端にかけてほぼ線形なツイストピッチ分布を持っていることがわかった。

3 件中 1件目~3件目を表示
  • 1