検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 21 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Recovery of scandium from hot spring water with graft adsorbent containing phosphoric groups

保科 宏行; 笠井 昇; 天田 春代; 高橋 牧克*; 田中 和也*; 瀬古 典明

日本イオン交換学会誌, 25(4), p.248 - 251, 2014/11

An adsorbent for Scandium (Sc) recovery was developed with radiation-induced graft polymerization of phosphoric acids that have a high affinity for Sc onto polyethylene fabrics. The adsorption performance of Sc was evaluated with the Sc adsorption equipment, consisting of 155 mm internal diameter columns and a pump that were set up near Yukawa River in Kusatsu town. To achieve a practical use of Sc recovery, the adsorbent requires repeated use with maintaining its efficiency in terms of cost reduction. So, the reusability of the adsorbent was investigated by repeating adsorption and elution. The breakthrough curves of Sc adsorption showed similar behavior in all tests. The adsorbed Sc from the 19th adsorption test was 56 mg, which was comparable capacity to the average amount of the adsorbed Sc during the 19 tests. These results indicated that the adsorbent was used more than 19 times with maintaining high adsorption performance of Sc.

論文

A New eco-friendly synthesis method for arsenic adsorbent

天田 春代; 高橋 牧克*; 保科 宏行; 瀬古 典明

日本イオン交換学会誌, 25(4), p.109 - 113, 2014/11

A large amount of arsenic waste solution which was dissolved in neutral aqueous media, was generated from the manufacturing process of gallium arsenide component in semiconductor industry. As for arsenic removal, an adsorbent was developed by radiation graft polymerization and subsequent chemical modification with N-methyl-D-glucamine (NMDG) as a functional group. Furthermore, the grafting and the modification were carried out using water based solvent instead of organic solvent in view of an environmental emission and a working environment. The solvents were comprised of water and surfactant, and the adsorption performances compared with a conventional method synthesized in 1,4-dioxane of organic solvent. Total amount of arsenic for arsenic(III) and arsenic(V) at pH 6.5 were 3.2 times and 2.1 times higher than our previous fibrous adsorbent. From the pH dependency studies, the developed grafted adsorbent gave high removal ratio in a neutral media area for both arsenic species. Breakthrough capacities in the column mode tests for arsenic(III) and arsenic(V) were 0.3 and 18 mg/g at pH 6.5, respectively.

論文

Adsorbent for arsenic(V) removal synthesized by radiation-induced graft polymerization onto nonwoven cotton fabric

保科 宏行; 高橋 牧克*; 笠井 昇; 瀬古 典明

International Journal of Organic Chemistry, 2(3), p.173 - 177, 2012/09

A fibrous adsorbent for arsenic (As) removal was synthesized with nonwoven cotton fabric as a trunk polymer. Phosphoric acid monomer was reacted by radiation-induced graft polymerization onto nonwoven cotton fabric. The degree of grafting of 130% was obtained at irradiation dose of 20 kGy with 5% of monomer solution for 2 hours reaction time at 40$$^{circ}$$C reaction temperature. After the grafted material was contacted with 10 mmol/L of zirconium (Zr) solution at pH1, 0.38 mmol/g of Zr as a functional group was loaded on the grafted phosphoric units for As(V) removal. The resulting adsorbent was evaluated by column mode adsorption with 1 mg/L of As(V) solution at various pH with space velocity 200 h$$^{-1}$$. The maximum capacity of As(V) adsorption was 0.1 mmol/g at pH2.

論文

Synthesis of arsenic graft adsorbents in pilot scale

保科 宏行; 笠井 昇; 柴田 卓弥*; 明田川 康*; 高橋 牧克*; 吉井 明央*; 角田 安彦*; 瀬古 典明

Radiation Physics and Chemistry, 81(8), p.1033 - 1035, 2012/08

 被引用回数:4 パーセンタイル:32.06(Chemistry, Physical)

The zirconium (Zr(IV))-type adsorbent for As(V) removal was synthesized by radiation-induced graft polymerization with phosphoric monomer and the subsequent chemical modification with Zr(IV) by loading on phosphoric units. The Zr(IV)-type adsorbent can rapidly remove As(V) to low concentration. In order to apply for a large amount of water treatment, it is necessary to construct of synthesis method in pilot scale. Synthesis method of graft adsorbent in pilot scale was investigated by setting up the equipment which was composed of reaction tanks, washing tank and pump. The equipment can produce the adsorbent which is maximum 0.3 $$times$$ 20 m size in one batch graft reaction. To evaluate the optimum condition in this equipment, it was required the optimization of several condition such absorbed dose, monomer concentration, reaction temperature and reaction time. A nonwoven cotton fabric as a trunk polymer was irradiated, then it was placed into the reaction tank with the deaerated monomer solution. The components of the monomer was phosphoric acid mono- (50%) and di- (50%) ethyl methacrylate ester. As a result, the degree of grafting of 150% was obtained at absorbed dose of 20 kGy with 5% monomer solution mixed by deionized water for 2 hours at 40 $$^{circ}$$C. Finally after loaded of Zr(IV) on grafted nonwoven fabric, As(V) adsorbent was achieved in pilot scale.

論文

Development of anion adsorbent for industry application based on biodegradable trunk material

笠井 昇; 保科 宏行; 瀬古 典明; 柴田 卓弥*; 高橋 牧克*

JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 46, 2012/01

本研究は、有害物質が含まれる廃坑廃水や産業排水によって生じる水質汚染の一因となっているヒ素などの水中溶存アニオン系の有害物質を水質基準値以下まで浄化可能な吸着材を植物由来の生分解性素材を用いて創製し、実用化を目指すものである。本報告では、パイロット規模における吸着材の合成条件を確立するために製作したグラフト重合装置の特性試験結果及び実験室規模のビーカースケールで最適化したグラフト吸着材の合成条件を適用して大量合成を行った結果について報告する。幅30cm,長さ7mのセルロース基材を巻物状にしてグラフト重合し、得られた吸着材の吸着特性を調べた結果、ビーカースケールで作製した吸着材の性能と同等であり、巻物の長さ方向に対して、吸着率の分布は10%程度であり、均一な吸着材が得られた。

論文

Novel system for recovering scandium from hot spring water with fibrous graft adsorbent

瀬古 典明; 保科 宏行; 笠井 昇; 植木 悠二; 玉田 正男; 桐生 俊幸*; 田中 和也*; 高橋 牧克*

日本イオン交換学会誌, 21(3), p.117 - 122, 2010/07

The concentration of scandium dissolved in the hot spring water of Yukawa River, which is located in Kusatsu Town, Gunma, Japan is 17 mg-Sc/ton; this resource corresponds to 1.2 tons in daily flow. We have developed experimental equipment that uses fibrous adsorbents and is capable of selectively collecting scandium from hot spring water. Scandium recovery was carried out by pumping into hot spring water an adsorbent that was packed into a column of 155 mm in inner diameter and 500 mm in height. Such equipment was placed in the Yukawa River at Kusatsu Town. This equipment could be scaled up from lab scale to pilot scale. We found that this system is capable of collecting 200 g/yr of scandium per column when hot spring water flows with 1,000 L/day.

口頭

草津温泉水からのスカンジウム捕集に関する研究

瀬古 典明; 保科 宏行; 笠井 昇; 玉田 正男; 桐生 俊幸*; 山口 容史*; 山本 秀雄*; 田中 和也*; 安斉 康宏*; 安齋 修宏*; et al.

no journal, , 

平成18年から19年度に経済産業省の地域新生コンソーシアム研究開発事業「温泉水中のスカンジウム捕集に関する研究開発」で得られた結果について、スカンジウム回収用の捕集材の合成,捕集材を充填した捕集装置の運転に関する成果報告を行う。具体的には、捕集材合成では、照射と反応を別工程で行う反応装置を開発し、日産12kgの製造を可能にした。捕集装置の運転では、空間速度が250h$$^{-1}$$以下では、4.5m$$^{3}$$の温泉中のスカンジウムを95%以上、13m$$^{3}$$の温泉水中のスカンジウムを50%以上回収できることがわかった。

口頭

生分解性材料を用いたアニオン吸着材の大量合成の検討

笠井 昇; 保科 宏行; 瀬古 典明; 柴田 卓弥*; 高橋 牧克*

no journal, , 

本研究は、有害物質が含まれる廃坑廃水や産業排水によって生じる水質汚染の一因となっているヒ素などの水中溶存アニオン系有害物質を水質基準値以下まで浄化可能な吸着材を植物由来の生分解性素材を用いて創製し、実用化を目指すものである。本報告では、パイロット規模における吸着材の合成条件を確立するために製作したグラフト重合装置の特性試験結果及び実験室規模のビーカースケールで最適化したグラフト吸着材の合成条件を適用して大量合成を行った結果について報告する。幅30cm,長さ7mのセルロース基材を巻物状にしてグラフト重合し、得られた吸着材の吸着特性を調べた結果、インジウム,ビスマス,ウランの吸着率はビーカースケールで作製した吸着材の性能と同等であり、巻物の長さ方向に対して、吸着率の分布は10%程度であり、均一な吸着材が得られた。

口頭

生分解性材料を用いたアニオン吸着材の合成

保科 宏行; 笠井 昇; 瀬古 典明; 高橋 牧克*

no journal, , 

カーボンニュートラルな植物由来のセルロース素材を基材に用いて、環境負荷の低減を図るため、放射線グラフト重合法により吸着材を合成する条件の最適化を図った。その結果、最適なグラフト重合条件は線量20kGy,リン酸モノマー濃度5%,反応温度40$$^{circ}$$C,反応時間1時間であり、従来のポリエチレン製不織布を基材に用いたグラフト重合条件と比較して、線量を10分の1、リン酸モノマー濃度を2分の1に低減できるだけでなく反応時間を8分の1に短縮可能となることから、セルロースを基材に用いることで、廃棄物低減による環境負荷の低減を図れるだけでなく、実用化に向けた材料の合成コスト低減が期待される。

口頭

生分解性材料を用いたアニオン吸着材のパイロットスケールでの合成

笠井 昇; 保科 宏行; 瀬古 典明; 柴田 卓弥*; 高橋 牧克*

no journal, , 

本報告では、放射線グラフト重合により得られたアニオン吸着材の実験室規模での最適重合条件を適用して、大量合成を行った結果について述べる。幅30cm$$times$$長さ7mのセルロース製不織布基材をモノマー溶液の通液状態を効果的にするためスペーサー(ネット)と重ねて巻いて外形130mm$$phi$$の巻物状態になるようにして、Co60-$$gamma$$線を20kGy照射した。5%リン酸モノマー水溶液を装置反応槽に入れた後、窒素ガスによりバブリングしてモノマー溶液を脱酸素化した。照射した巻物状の基材を反応槽に装填し、反応温度40$$^{circ}$$C,反応時間2時間の条件で吸着材を合成した。その結果、グラフト率は157%で目標としている100から150%のグラフト率に近いものが得られた。巻物状で合成した吸着材の外側,中央,内側部分の吸着率分布については、評価しやすいインジウム,ビスマス,ウランを用いて調べた結果、いずれも90から100%と大きな違いが見られず均一なグラフト重合材が得られた。

口頭

Preparation of graft phosphoric adsorbent onto nonwoven cotton fabric in pilot scale

瀬古 典明; 笠井 昇; 保科 宏行; 柴田 卓弥*; 高橋 牧克*

no journal, , 

本研究は、廃坑廃水や産業排水によって生じる水質汚染の一因であるヒ素などのアニオン系有害物質を水質基準値以下まで浄化可能な吸着材をこれまでの石油由来の材料に代わり、植物由来の生分解性素材を基材に用いた吸着材の大量合成について検討したものである。大量合成用の装置による合成では、セルロース製不織布基材を幅30cm$$times$$長さ7mに切り出し、基材をスペーサー(ネット)と重ねて巻いて外形約130mm$$phi$$の巻物状態にして、容量35L(約270mm$$phi$$$$times$$650mm)の反応槽を有するグラフト重合装置に装填してグラフト重合を行った。リン酸モノマー水溶液(5%)を装置反応槽に所定量入れた後、窒素ガスによりバブリングして脱酸素化した。照射した巻物試料を反応槽に設置し、反応温度40$$^{circ}$$C、反応時間2時間の条件で吸着材を合成した結果、20kGy照射後の線量測定においては、総照射時間の半分に相当する1時間後に照射試料を180度反転することで、表面で19.8kGy、内側で18.4kGyとなり、巻物の表面と内部でほとんど差異は認められなかった。また、重合装置により合成したグラフト重合材のグラフト率の平均値は157%で、吸着材に要求される120%以上の値を得ることに成功した。

口頭

Evaluation of biodegradable adsorbent for arsenic(V) synthesized by radiation-induced graft polymerization

保科 宏行; 笠井 昇; 瀬古 典明; 高橋 牧克*

no journal, , 

A fibrous adsorbent for arsenic(V) was synthesized by radiation-induced emulsion graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid monomer which composed of phosphoric acid mono (50%) and di (50%) ethyl methacrylate ester onto nonwoven cotton fabric and subsequent chemical modification. The graft polymerization was carried out by contacting the nonwoven cotton fabric at absorbed 20 kGy with 5% monomer solution for 1 h at 40 $$^{circ}$$C. The resulting grafted phosphoric acid onto nonwoven cotton fabric (FPC) had 110% grafting degree that corresponded to 2 mol-phosphoric acid per 1 kg of FPC. The following next reaction for making adsorbent, zirconium(IV) was loaded onto FPC by contacting with zirconium solution adjusted to pH2. To evaluate the adsorption ability for arsenic(V), adsorption test was tested with 10 ppm of arsenic solution at pH2. A total amount of arsenic adsorption was 1,500 mg per 1 kg of adsorbent.

口頭

Arsenic removal from streaming water with graft adsorbent

瀬古 典明; 保科 宏行; 笠井 昇; 高橋 牧克*; 吉井 明央*; 角田 安彦*; 柴田 卓弥*; 明田川 康*

no journal, , 

Purification of waste water is important task from the viewpoint of economy and environmental preservation. In general, synthetic polymers such as polyethylene and polypropylene have been used as trunk polymer fibers due to their reactivity in the grafting process and high mechanical strength. Synthetic trunk polymers are, however, derived from petroleum resources. If a natural polymer such as cellulose is used as the trunk polymer for graft polymerization, the dependence on petroleum resources would decrease. In this study, a fibrous adsorbent for the removal of arsenic ion was synthesized by radiation-induced emulsion graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid monomer (PA) onto nonwoven cotton fabric, and subsequent chemical modification by zirconium salts. The optimal pre-irradiation dose for initiation of graft polymerization of PA, which minimized the effects of radiation damage on the mechanical strength of the nonwoven cotton fabric, was found to be 20 kGy. The synthesized fibrous adsorbents were applied for the removal of arsenic from streaming water. The purification system for 10 tons streaming water was assembled by stack of graft adsorbents in preliminal experiment. These adsorbents were decomposed by microorganisms and roughly 60 % in fabrics was finally changed to CO$$_2$$ in 3 months.

口頭

生分解型グラフトアニオン吸着材を用いたフィールドテスト

瀬古 典明; 保科 宏行; 笠井 昇; 高橋 牧克*; 吉井 明央*; 角田 安彦*; 柴田 卓弥*; 明田川 康*

no journal, , 

放射線グラフト重合法によりヒ素を吸着除去可能なジルコニウム残基を繊維状の不織布に導入して量産化した吸着材を用いて群馬県草津温泉近傍の廃坑山から湧出する廃水内のヒ素をターゲットとし、フィールド試験を行った。吸着材は廃水と吸着材が平行又は直交に接触可能な2つの通液方法で評価を行った。その結果、pH2の廃水を50L/分で処理した平行流方式の場合、2日間で170ppbのヒ素を排水基準値以下の90ppbまでの除去することができた。次いで行った直交流方式では、空間速度200/hの処理においてわずか数分で50ppbまで除去できることに成功した。繊維状の吸着材の場合、通液速度を極端に高速化することが可能なため、廃水を一時的に貯留する槽の設置スペースを大幅に軽減できる利点があることから狭窄地の温泉場などへの適応に期待がもてる。

口頭

Application of water decontamination by anion adsorbent grafted onto biodegradable nonwoven fabrics

瀬古 典明; 保科 宏行; 笠井 昇; 高橋 牧克*; 角田 安彦*; 吉井 明央*; 柴田 卓弥*; 明田川 康*

no journal, , 

Purification of waste water is important task from the viewpoint of economy and environmental preservation. In general, synthetic polymers such as polyethylene and polypropylene have been used as trunk polymer fibers due to their reactivity in the grafting process and high mechanical strength. Synthetic trunk polymers are, however, derived from petroleum resources. If a natural polymer such as cellulose is used as the trunk polymer for graft polymerization, the dependence on petroleum resources would decrease. In this study, a fibrous adsorbent for the removal of arsenic ion was synthesized by radiation-induced emulsion graft polymerization of 2-hydroxyethylmethacrylate phosphoric acid monomer (PA) onto nonwoven cotton fabric, and subsequent chemical modification by zirconium salts. The optimal pre-irradiation dose for initiation of graft polymerization of PA, which minimized the effects of radiation damage on the mechanical strength of the nonwoven cotton fabric, was found to be 20 kGy.

口頭

生分解型グラフトアニオン吸着材の量産化技術開発と特性評価

笠井 昇; 保科 宏行; 瀬古 典明; 柴田 卓弥*; 高橋 牧克*

no journal, , 

植物由来の生分解性素材をグラフト重合の基材として用いて、ヒ素などの有害なアニオン物質を除去可能な吸着材を創製し、その適合性の評価を進めている。吸着材の量産化技術を開発するために製作設置したグラフト重合装置により、スケールアップに伴う課題の抽出を行い、最適な量産化条件の検討を行った。吸着材の合成は2段階で行う。まず1段階目のグラフト重合工程では、幅30cmのセルロース製不織布を基材として合成し、グラフト率200%の均一なグラフト重合体がビーカースケールの42,000倍に相当する14mの長さで得られた。また、2段階目のヒ素を吸着するためのジルコニウム残基の担持工程においてもビーカースケールの21,000倍に相当する7mの長さまで均一に付与できることが確認でき、最終的に日産約30m$$^{2}$$の吸着材の合成ができることがわかった。

口頭

放射線グラフト重合法によるアニオン吸着材の大量合成と吸着性能評価

保科 宏行; 笠井 昇; 高橋 牧克*; 柴田 卓弥*; 明田川 康*; 吉井 明央*; 角田 安彦*; 瀬古 典明

no journal, , 

二酸化炭素の排出抑制が可能な植物由来の生分解性高分子を基材に用いて、放射線グラフト重合によりヒ素を除去可能な環境負荷低減型の吸着材を作製し、実用化を視野に入れた量産化条件の検討及び吸着特性評価を行った。幅30cm$$times$$長さ7mのロール状にしたセルロース製不織布基材をドライアイス温度下,窒素雰囲気下で$$gamma$$線を20kGy照射した後、2つの反応槽(35L)とポンプ等から構成されるグラフト重合装置を用いて、リン酸モノマー濃度5%,反応温度40$$^{circ}$$C,反応時間1時間の条件で反応を行った結果、吸着材に必要なグラフト率100%を得ることができた。次いで、pH1に調整した5mMジルコニウム(Zr)溶液中にグラフト重合材を浸漬させ、ヒ素に対して親和性の高いZrをグラフト重合により導入したリン酸基に担持することで吸着材を得た。得られたロール状吸着材のZr導入量を評価した結果、吸着材のいずれの部位においても均一に導入され、Zr導入量は吸着材1gあたり10mg以上であった。得られた吸着材を、pH2に調整した1ppm(mg/L)のヒ素溶液中で2時間浸漬撹拌させ、浸漬前後の溶液中ヒ素濃度を測定したところ、吸着材のいずれの部位においてもヒ素吸着量は1.0mg/g-吸着材以上と安定したものを得ることができた。

口頭

生分解型グラフトアニオン吸着材の基本吸着特性

保科 宏行; 高橋 牧克*; 笠井 昇; 瀬古 典明

no journal, , 

植物由来の高分子の一つであるセルロース製不織布繊維をドライアイス温度下、窒素雰囲気下で電子線照射した後、ヒ素に対して親和性の高いジルコニウムを導入するため、ジルコニウムを担持可能なリン酸モノマーを用いてグラフト重合を行った。次いで、リン酸基を導入した不織布のグラフト重合体をpH1に調整した10mMのジルコニウム溶液中に浸漬させ、リン酸基にジルコニウムを担持したヒ素用の吸着材を得た。得られた吸着材を1cm$$phi$$のカラムに充填した後、pH2に調整した1ppm(mg/L)のヒ素溶液を空間速度SV(Space velocity) 200h$$^{-1}$$及び1,000h$$^{-1}$$の速度でカラムに通液させてヒ素吸着特性を評価した。その結果、いずれの通液速度においても破過時(C/C$$_{0}$$=0.05)における通液倍率(BV)は1,500で、そのときのヒ素吸着量は、吸着材1gあたり8mgであった。一般的に、粒子状樹脂を用いたヒ素吸着における通液速度はSV10h$$^{-1}$$程度であることから、本吸着材は粒子状吸着材に比較して、100倍の速さでヒ素を吸着できることがわかった。

口頭

放射線グラフト重合法による生分解性材料を基材に用いたヒ素吸着材の大量合成と吸着特性評価

保科 宏行; 笠井 昇; 柴田 卓弥; 高橋 牧克*; 明田川 康*; 吉井 明央*; 角田 安彦*; 瀬古 典明

no journal, , 

植物由来の天然高分子であるセルロースを基材に用いて、放射線グラフト重合により、ヒ素を効率的に除去可能なジルコニウム(Zr)をリガンドとして導入したグラフト吸着材を作製した。実用化を視野に入れ、吸着材の量産化条件の検討を行った結果、リン酸モノマー濃度5%、反応温度40$$^{circ}$$C、反応時間1時間の条件で反応を行うことで、吸着材に必要なグラフト率100%以上を得ることができた。次いで、グラフト重合材にZrを接触させて得られたロール状ヒ素吸着材のZr導入量を評価した結果、いずれの部位においても吸着材1gあたりのZr導入量は10mg以上であり、ヒ素吸着能として充分なZr導入量を得ることができた。得られた吸着材を1ppmのヒ素溶液中(pH2)に2時間浸漬撹拌させヒ素吸着試験を行った結果、吸着材のいずれの部位においてもヒ素吸着量は1.0mg/g-吸着材以上であり、ほぼ均一に吸着基を付与できることがわかった。

口頭

放射線グラフト重合法により作製したヒ素吸着材を用いた吸着システムのヒ素吸着特性評価

保科 宏行; 笠井 昇; 柴田 卓弥; 高橋 牧克*; 明田川 康*; 吉井 明央*; 角田 安彦*; 瀬古 典明

no journal, , 

河川などの環境水中に溶存するヒ素を除去するため、環境に優しい植物由来のセルロース製不織布を基材に活用したヒ素吸着材の開発を進めた。30cm幅の基材を14m長に切り出し、これをロール状に巻いて冷却下で$$gamma$$線を20kGy照射した。照射後は、リン酸モノマーのエマルション溶液を反応槽内で循環させながら接触させてグラフト重合を行った。次いで、導入したリン酸基にジルコニウムを担持させて吸着材とした。得られた吸着材を吸着材カセットに充填した後、1日に10m$$^{3}$$の処理が可能な吸着装置内にそのカセットを装填して評価を行った。その結果、河川水中のヒ素濃度360$$mu$$g/Lを環境基準値の10$$mu$$g/Lまで低減可能な除去方法を確立することができた。

口頭

環境に優しい水系合成法を用いたヒ素吸着材の開発

天田 春代; 保科 宏行; 瀬古 典明; 高橋 牧克*

no journal, , 

近年、半導体の材料としてガリウムヒ素が広く使われており、その製造工程において、大量のヒ素が排出される。そのため、工業的に有効なヒ素処理方法が求められている。ヒ素を回収する方法として最も一般的なのは凝集剤を用いる凝集沈殿法があるが、ヒ素を含む大量の廃棄物が生成し、二次的処理が必要となる。これに対し、吸着法による処理の場合、生成する廃棄物の量を抑制できる利点から、これまでに多くの吸着材が開発されてきた。ガリウムヒ素排水のpHである中性域において機能する吸着材に、N-メチル-D-グルカミン(NMDG)を官能基とするヒ素吸着材が知られているが、従来の作製方法では、毒性や引火性を有する有機溶媒を用いるため、PRTR法や消防法の観点から、大規模な生産法として適応するには困難であった。そこで、新規な溶媒として、水に界面活性剤を添加した系でNMDG官能基の導入を試み、従来法で合成した吸着材に対し、三価のヒ素で2.2倍に相当する4.75mg/g、五価のヒ素で1.4倍に相当する9.63mg/gの容量を有する吸着材の合成を可能にした。

21 件中 1件目~20件目を表示