Report of summer holiday practical training on 2024

Hasegawa, Toshinari; Nagasumi, Satoru; Ishitsuka, Etsuo; Egashira, Keiichiro*; Furuya, Aoi*; Ando, Ryota*; Sakaguchi, Akira*; Sakurai, Yosuke; Nakano, Yumi*; Iigaki, Kazuhiko

JAEA-Technology 2025-004, 20 Pages, 2025/07

JAEA-Technology-2025-004.pdf:1.67MB

Four people from three universities participated in the 2024 summer holiday practical training with the theme of "Technical development on HTTR". The participants practiced the analysis of the HTTR core, the analysis of Cs deposition behavior in the primary cooling system, and the feasibility study of nuclear rockets using HTGR. In the questionnaire after this training, there were comments from participants that it was beneficial as a work experience and that it was meaningful because of many opportunities to communicate with staff. These impressions suggest that this training was generally evaluated as good.

Microstructural evolution in tungsten binary alloys under proton and self-ion irradiations at 800C

Miyazawa, Takeshi; Kikuchi, Yuta*; Ando, Masami*; Yu, J.-H.*; Yabuuchi, Kiyohiro*; Nozawa, Takashi*; Tanigawa, Hiroyasu*; Nogami, Shuhei*; Hasegawa, Akira*

Journal of Nuclear Materials, 575, p.154239_1 - 154239_11, 2023/03

https://doi.org/10.1016/j.jnucmat.2023.154239

Shell evolution beyond =28 and =50; Spectroscopy of Zn

Shand, C. M.*; Podolyk, Zs.*; Grska, M.*; Doornenbal, P.*; Obertelli, A.*; Nowacki, F.*; Otsuka, T.*; Sieja, K.*; Tostevin, J. A.*; Tsunoda, T.*; et al.

Physics Letters B, 773, p.492 - 497, 2017/10

https://doi.org/10.1016/j.physletb.2017.09.001

Observation of the inhomogeneous spatial distribution of MeV ions accelerated by the hydrodynamic ambipolar expansion of clusters

Kanasaki, Masato; Jinno, Satoshi; Sakaki, Hironao; Faenov, A.*; Pikuz, T.*; Nishiuchi, Mamiko; Kiriyama, Hiromitsu; Kando, Masaki; Sugiyama, Akira; Kondo, Kiminori; et al.

Radiation Measurements, 83, p.12 - 14, 2015/12

https://doi.org/10.1016/j.radmeas.2015.06.011

An inhomogeneous spatial distribution of laser accelerated carbon/oxygen ions produced via the hydrodynamic ambipolar expansion of CO clusters has been measured by using CR-39 detectors. An inhomogeneous etch pits spatial distribution has appeared on the etched CR-39 detector installed on the laser propagation direction, while homogeneous ones are appeared on those installed at 45 and 90 from the laser propagation direction. From the range of ions in CR-39 obtained by using the multi-step etching technique, the averaged energies of carbon/oxygen ions for all directions are determined as 0.78 0.09 MeV/n. The number of ions in the laser propagation direction is about 1.5 times larger than those in other directions. The inhomogeneous etch pits spatial distribution in the laser propagation direction could originate from an ion beam collimation and modulation by the effect of electromagnetic structures created in the laser plasma.

Thermal transient test and strength evaluation of a tubesheet structure made of Mod.9Cr-1Mo steel, 2; Creep-fatigue strength evaluation

Ando, Masanori; Hasebe, Shinichi; Kobayashi, Sumio; Kasahara, Naoto*; Toyoshi, Akira*; Omae, Takahiro*; Enuma, Yasuhiro*

Nuclear Engineering and Design, 275, p.422 - 432, 2014/08

AA2013-0396.pdf:1.44MB

https://doi.org/10.1016/j.nucengdes.2014.04.029

In this study, the strength of a tubesheet test model simulating a semispherical tubesheet structure subjected to cyclic thermal transients was evaluated using the finite element analysis (FEA). A test model made of Mod.9Cr-1Mo steel was subjected to 1,873 cycles of severe thermal transient loading using a large-scale sodium loop, in which elevated-temperature sodium at 600C and 250C was flowed repeatedly and kept at the final temperature for 2 and 1 h, respectively. Heat transfer analysis and stress analysis were performed using the sodium temperature data measured during the test. Then, the elastic and inelastic stress analysis results were used to investigate the failure mechanism by creep-fatigue damage and evaluate the failure strength. The evaluation based on the results of inelastic analysis estimated the number of cycles to failure within a factor of 3.

High power laser developments with femtosecond to nanosecond pulse durations for laser shock science and engineering

Kiriyama, Hiromitsu; Mori, Michiaki; Suzuki, Masayuki*; Daito, Izuru*; Okada, Hajime; Ochi, Yoshihiro; Tanaka, Momoko; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; et al.

Reza Kenkyu, 42(6), p.441 - 447, 2014/06

http://ci.nii.ac.jp/naid/40020137371

We describe three specific high power laser systems that are being developed in our laboratory for many applications in high field science, nonlinear optics and material processing. We report on a femtosecond petawatt-class Ti:sapphire chirped-pulse amplification laser system that can produce a pulse energy of 20 J of 40 fs pulse duration, a picosecond high intensity Yb:YAG chirped-pulse amplification laser system that can generate a pulse energy of 100 mJ of 0.5 ps pulse duration, and a nanosecond high repetition rate Nd:YAG laser system that can provide an average power of 360 W with a pulse duration of 30 ns delivered at a 1 kHz repetition rate. We discuss the basic design aspects and present the results from our experimental investigations of these laser systems.

Creep-fatigue evaluation of a structural model made of Mod.9Cr-1Mo steel subjected to the cyclic thermal loading

Ando, Masanori; Hasebe, Shinichi; Kobayashi, Sumio; Kasahara, Naoto*; Toyoshi, Akira*; Omae, Takahiro*; Enuma, Yasuhiro*

Nihon Kikai Gakkai M&M 2013 Zairyo Rikigaku Kanfuarensu Koen Rombunshu (CD-ROM), p.OS1510_1 - OS1510_3, 2013/10

To validate the failure mode and assess creep-fatigue damage evaluation, a thick cylinder test model made of Mod.9Cr-1Mo steel was subjected to 1,873 cycles of accelerated thermal transient loading using a large-scale sodium loop through which liquid sodium at 600C and 250C flowed repeatedly, with the period of each transient being 2 h and 1 h, respectively. After completion of the test, liquid penetrant testing, a surface observation and hardness testing were performed to characterize failure mode. Based on the finite element analysis, creep-fatigue life was evaluated by applying the JSME FRs code. The failure cycles evaluated by rules described in the JSME FRs code was shown to have a safety margin of greater than 300 times for this system.

Thermal transient test and strength evaluation of a thick cylinder model made of Mod.9Cr-1Mo steel

Ando, Masanori; Hasebe, Shinichi; Kobayashi, Sumio; Kasahara, Naoto*; Toyoshi, Akira*; Omae, Takahiro*; Enuma, Yasuhiro*

Nuclear Engineering and Design, 255, p.296 - 309, 2013/02

https://doi.org/10.1016/j.nucengdes.2012.10.016

To verify the failure mode and assess creep-fatigue damage, a thick cylinder test model made of Mod.9Cr-1Mo steel was subjected to 1,873 cycles of accelerated thermal transient loading using a large-scale sodium loop through which liquid sodium at 600 C and 250 C flowed repeatedly, with the period of each transient being 2 h and 1 h, respectively. After completion of the test, the test model was inspected using liquid penetrant testing. Observations using a scanning electron microscope and hardness testing were then performed to characterize creep-fatigue damage in the structural model subjected to cyclic thermal transient loading in a sodium environment. Finite element analysis were performed to evaluate the relationship between creep-fatigue damage and the observed crack conditions.

Stabilization of laser accelerated electron bunch by the ionization-stage control

Mori, Michiaki; Kando, Masaki; Kotaki, Hideyuki; Hayashi, Yukio; Kawase, Keigo; Bulanov, S. V.; Ogura, Koichi; Pirozhkov, A. S.; Kondo, Kiminori; Sugiyama, Akira; et al.

Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.4062 - 4064, 2010/05

http://accelconf.web.cern.ch/accelconf/IPAC10/papers/thpec003.pdf

Experimental studies of the high and low frequency electromagnetic radiation produced from nonlinear laser-plasma interactions

Kando, Masaki; Pirozhkov, A. S.; Fukuda, Yuji; Esirkepov, T. Zh.; Daito, Izuru; Kawase, Keigo; Ma, J. L.*; Chen, L. M.*; Hayashi, Yukio; Mori, Michiaki; et al.

European Physical Journal D, 55(2), p.465 - 474, 2009/09

https://doi.org/10.1140/epjd/e2009-00246-x

Nonlinear interaction of intense laser beams with plasma causes a number of different regimes of generation of high energy particle beams and of strong radiation with the emitted photon energy from the X-ray to THz frequency range. The review of the first proof-of-principle experiment and the latest progress on the flying mirror is presented. A low frequency EM radiation emission has also been observed in our experiments. The interpretation invokes the relativistic electromagnetic solitons. The solitons are formed in an underdense plasma in the process of the laser pulse frequency downshift. They store a portion of EM wave energy with the polarization inherited from the laser and emit it at the plasma-vacuum interface in a form of the low frequency EM bursts. We present the results of the polarization-resolved measurements.