Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shaimerdenov, A.*; Gizatulin, S.*; Dyussambayev, D.*; Askerbekov, S.*; 植田 祥平; 相原 純; 柴田 大受; 坂場 成昭
Nuclear Engineering and Technology, 54(8), p.2792 - 2800, 2022/08
被引用回数：7 パーセンタイル：88.9(Nuclear Science & Technology)In the core of the WWR-K reactor, a long-term irradiation of tri-structural isotopic (TRISO)-coated fuel particles (CFPs) with a UO
kernel was carried out under normal operating conditions of the high-temperature gas-cooled reactor (HTGR). This TRISO fuel was attained at the temperature of 950 to 1,100 
C, and the uranium burnup of 9.9% FIMA (fission per initial metal atom) during the irradiation. The release of the gaseous fission product from the fuel was measured in-pile, and its release-to-birth (R/B) ratio was evaluated using the model developed in the High-Temperature Engineering Test Reactor (HTTR) project. After the irradiation test, fuel compacts were subjected to electric dissociation and nondestructive inspections such as X-ray radiography and gamma spectrometry. Finally, it was concluded that integrity of the TRISO fuel irradiated at approximately 9.9% FIMA was demonstrated, and a low fuel failure fraction and a low R/B measured with krypton-88 indicated good performance and reliability of the high burnup TRISO fuel.
Chikhray, Y.*; Askerbekov, S.*; Kenzhin, Y.*; Gordienko, Y.*; 石塚 悦男
Fusion Science and Technology, 76(4), p.494 - 502, 2020/05
被引用回数：1 パーセンタイル：12.16(Nuclear Science & Technology)The investigation of the mechanisms and dynamics of hydrogen isotopic interaction with solid surfaces (metals, ceramics, graphites, eutectics) in temperature and pressure ranges is important not only for the correct prediction of each isotope's evolution but also for substantiation of the safe operation of hydrogen-facing structural materials. The interaction of the hydrogen isotopes mix with the surface of solid metal or liquid eutectics is a complicated multistage H-D-T-O-solid interacting process depending on material property, environment, and the solid's surface parameters. To better understand the mechanisms of hydrogen isotopes interchange at a solid surface and to identify the limiting stages in the sorption-desorption processes, a reactor experiment of neutron irradiation was conducted with lithium-containing eutectics as tritium-generating media under the external flow of hydrogen. This work presents the model and results of its application to fitting the experimental results of tritium yield from the lithium-lead eutectics Pb
Li
under thermal neutrons irradiation at the IVG.1M reactor in Kazakhstan. The elaborated model and the approach used were also applied to the simulation of high temperature gas cooled reactor graphite corrosion in water vapors.
Chikhray, Y.*; Kulsartov, T.*; Shestakov, V.*; Kenzhina, I.*; Askerbekov, S.*; 角田 淳弥; 植田 祥平; 柴田 大受; 坂場 成昭; Abdullin, Kh.*; et al.
Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.572 - 577, 2016/11
高温ガス炉(HTGR)に用いられる黒鉛について、耐腐食性を有するSiC被覆の適用は重要な課題である。本研究は、高密度のIG-110黒鉛にSiCを傾斜被覆した材料について、1673Kまでの温度で蒸気との化学反応の結果を示したものである。100Paの蒸気との反応に関する実験では、SiC酸化のパッシブ反応により表面にSiO膜が形成されることを確認した。また、1Paの蒸気とのアクティブ反応では、表面に様々なカーボン複合材が形成されることを確認した。
