Refine your search:     
Report No.
Search Results: Records 1-20 displayed on this page of 22

Presentation/Publication Type

Initialising ...


Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...


Initialising ...


Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Stacking fault energy analyses of additively manufactured stainless steel 316L and CrCoNi medium entropy alloy using in situ neutron diffraction

Woo, W.*; Jeong, J. S.*; Kim, D.-K.*; Lee, C. M.*; Choi, S.-H.*; Suh, J.-Y.*; Lee, S. Y.*; Harjo, S.; Kawasaki, Takuro

Scientific Reports (Internet), 10(1), p.1350_1 - 1350_15, 2020/01

Journal Articles

PARaDIM; A PHITS-based Monte Carlo tool for internal dosimetry with tetrahedral mesh computational phantoms

Carter, L. M.*; Crawford, T. M.*; Sato, Tatsuhiko; Furuta, Takuya; Choi, C.*; Kim, C. H.*; Brown, J. L.*; Bolch, W. E.*; Zanzonico, P. B.*; Lewis, J. S.*

Journal of Nuclear Medicine, 60(12), p.1802 - 1811, 2019/12

 Times Cited Count:2 Percentile:55.17(Radiology, Nuclear Medicine & Medical Imaging)

Voxel human phantoms have been used for internal dose assessment. More anatomically accurate representation become possible for skins or layer tissues owing to recent developments of advanced polygonal mesh-type phantoms and thus internal dose assessment using those advanced phantoms are desired. However, the Monte Carlo transport calculation by implementing those phantoms require an advanced knowledge for the Monte Carlo transport codes and it is only limited to experts. We therefore developed a tool, PARaDIM, which enables users to conduct internal dose calculation with PHITS easily by themselves. With this tool, a user can select tetrahedral-mesh phantoms, set radionuclides in organs, and execute radiation transport calculation with PHITS. Several test cases of internal dosimetry calculations were presented and usefulness of this tool was demonstrated.

Journal Articles

Computation speeds and memory requirements of mesh-type ICRP reference computational phantoms in Geant4, MCNP6, and PHITS

Yeom, Y. S.*; Han, M. C.*; Choi, C.*; Han, H.*; Shin, B.*; Furuta, Takuya; Kim, C. H.*

Health Physics, 116(5), p.664 - 676, 2019/05

 Times Cited Count:3 Percentile:12.61(Environmental Sciences)

Recently, Task Group 103 of the ICRP developed the mesh-type reference computational phantoms (MCRPs), which are planned for use in future ICRP dose coefficient calculation. Performance of major Monte Carlo particle transport codes (Geant4, MCNP6, and PHITS) were tested with MCRP. External and internal exposure of various particles and energies were calculated and the computational times and required memories were compared. Additionally calculation for voxel-mesh phantom was also conducted so that the influence of different mesh-representation in each code was studied. Memory usage of MRCP was as large as 10 GB with Geant4 and MCNP6 while it is much less with PHITS (1.2 GB). In addition, the computational time required for MRCP tends to increase compared to voxel-mesh phantoms with Geant4 and MCNP6 while it is equal or tends to decrease with PHITS.

Journal Articles

$$^{239}$$Pu nuclear magnetic resonance in the candidate topological insulator PuB$$_4$$

Dioguardi, A. P.*; Yasuoka, Hiroshi*; Thomas, S. M.*; Sakai, Hironori; Cary, S. K.*; Kozimor, S. A.*; Albrecht-Schmitt, T. E.*; Choi, H. C.*; Zhu, J.-X.*; Thompson, J. D.*; et al.

Physical Review B, 99(3), p.035104_1 - 035104_6, 2019/01

 Times Cited Count:0 Percentile:100(Materials Science, Multidisciplinary)

We present a detailed nuclear magnetic resonance (NMR) study of $$^{239}$$Pu in bulk and powdered single-crystal plutonium tetraboride (PuB$$_4$$), which has recently been investigated as a potential correlated topological insulator. The $$^{239}$$Pu NMR spectra are consistent with axial symmetry of the shift tensor showing for the first time that $$^{239}$$Pu NMR can be observed in an anisotropic environment and up to room temperature. The temperature dependence of the $$^{239}$$Pu shift, combined with a relatively long spin-lattice relaxation time ($$T_1$$), indicate that PuB$$_4$$ adopts a nonmagnetic state with gaplike behavior consistent with our density functional theory calculations. The temperature dependencies of the NMR Knight shift and $$T^{-1}$$ imply bulk gaplike behavior confirming that PuB$$_4$$ is a good candidate topological insulator.

Journal Articles

Battery-free, skin-interfaced microfluidic/electronic systems for simultaneous electrochemical, colorimetric, and volumetric analysis of sweat

Bandodkar, A. J.*; Gutruf, P.*; Choi, J.*; Lee, K.-H.*; Sekine, Yurina; Reeder, J. T.*; Jeang, W. J.*; Aranyosi, A. J.*; Lee, S. P.*; Model, J. B.*; et al.

Science Advances (Internet), 5(1), p.eaav3294_1 - eaav3294_15, 2019/01

 Times Cited Count:71 Percentile:0.15(Multidisciplinary Sciences)

Interest in advanced wearable technologies increasingly extends beyond systems for biophysical measurements to those that enable continuous, non-invasive monitoring of biochemical markers in biofluids. Here, we introduce battery-free, wireless microelectronic platforms that perform sensing via schemes inspired by the operation of biofuel cells. Combining these systems in a magnetically releasable manner with chrono-sampling microfluidic networks that incorporate assays based on colorimetric sensing yields thin, flexible, lightweight, skin-interfaced technologies with broad functionality in sweat analysis. A demonstration device allows simultaneous monitoring of sweat rate/loss, along with quantitative measurements of pH and of lactate, glucose and chloride concentrations using biofuel cell and colorimetric approaches.

Journal Articles

Super-absorbent polymer valves and colorimetric chemistries for time-sequenced discrete sampling and chloride analysis of sweat via skin-mounted soft microfluidics

Kim, S. B.*; Zhang, Y.*; Won, S. M.*; Bandodkar, A. J.*; Sekine, Yurina; Xue, Y.*; Koo, J.*; Harshman, S. W.*; Martin, J. A.*; Park, J. M.*; et al.

Small, 14(12), p.1703334_1 - 1703334_11, 2018/03

 Times Cited Count:29 Percentile:5.75(Chemistry, Multidisciplinary)

Journal Articles

EBR-II passive safety demonstration tests benchmark analyses; Phase 2

Briggs, L.*; Monti, S.*; Hu, W.*; Sui, D.*; Su, G. H.*; Maas, L.*; Vezzoni, B.*; Partha Sarathy, U.*; Del Nevo, A.*; Petruzzi, A.*; et al.

Proceedings of 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-16) (USB Flash Drive), p.3030 - 3043, 2015/08

The International Atomic Energy Agency Coordinated Research Project, "Benchmark Analyses of an EBR-II Shutdown Heat Removal Test" is in the third year of its four-year term. Nineteen participants representing eleven countries have simulated two of the most severe transients performed during the Shutdown Heat Removal Tests program conducted at Argonne's Experimental Breeder Reactor II. Benchmark specifications were created for these two transients, enabling project participants to develop computer models of the core and primary heat transport system, and simulate both transients. In phase 1 of the project, blind simulations were performed and then evaluated against recorded data. During phase 2, participants have refined their models to address areas where the phase 1 simulations did not predict as well as desired the experimental data. This paper describes the progress that has been made to date in phase 2 in improving on the earlier simulations and presents the direction of planned work for the remainder of the project.

Journal Articles

Simultaneous generation of ions and high-order harmonics from thin conjugated polymer foil irradiated with ultrahigh contrast laser

Choi, I. W.*; Kim, I. J.*; Pae, K. H.*; Nam, K. H.*; Lee, C.-L.*; Yun, H.*; Kim, H. T.*; Lee, S. K.*; Yu, T. J.*; Sung, J. H.*; et al.

Applied Physics Letters, 99(18), p.181501_1 - 181501_3, 2011/11

 Times Cited Count:15 Percentile:39.63(Physics, Applied)

We report the manufacturing of a thin foil target made of conjugated polymer, and the simultaneous observation of laser accelerated ions and second harmonic radiation, when irradiated with ultrahigh-contrast laser pulse at a maximum intensity of 4$$times$$10$$^{19}$$ W/cm$$^{2}$$. Maximum proton energy of 8 MeV is achieved along the target normal direction. Strong second harmonic with over 6% energy ratio compared to fundamental is emitted along the specular direction. Two-dimensional particle-in-cell simulations confirm the simultaneous generation of protons and high-order harmonics, which demonstrates the feasibility of applications requiring particle and radiation sources at once, effectively using the same laser and target.

Journal Articles

Event structure and double helicity asymmetry in jet production from polarized $$p + p$$ collisions at $$sqrt{s}$$ = 200 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review D, 84(1), p.012006_1 - 012006_18, 2011/07

 Times Cited Count:22 Percentile:28.37(Astronomy & Astrophysics)

We report on the event structure and double helicity asymmetry ($$A_{LL}$$) of jet production in longitudinally polarized $$p + p$$ collisions at $$sqrt{s}$$ = 200 GeV. Photons and charged particles were measured by the PHENIX experiment. Event structure was compared with the results from PYTHIA event generator. The production rate of reconstructed jets is satisfactorily reproduced with the next-to-leading-order perturbative QCD calculation. We measured $$A_{LL}$$ = -0.0014 $$pm$$ 0.0037 at the lowest $$P_T$$ bin and -0.0181 $$pm$$ 0.0282 at the highest $$P_T$$ bin. The measured $$A_{LL}$$ is compared with the predictions that assume various $$Delta G(x)$$ distributions.

Journal Articles

Identified charged hadron production in $$p + p$$ collisions at $$sqrt{s}$$ = 200 and 62.4 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06

 Times Cited Count:134 Percentile:0.69(Physics, Nuclear)

Transverse momentum distributions and yields for $$pi^{pm}, K^{pm}, p$$, and $$bar{p}$$ in $$p + p$$ collisions at $$sqrt{s}$$ = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the RHIC. We present the inverse slope parameter, mean transverse momentum, and yield per unit rapidity at each energy, and compare them to other measurements at different $$sqrt{s}$$ collisions. We also present the scaling properties such as $$m_T$$ and $$x_T$$ scaling and discuss the mechanism of the particle production in $$p + p$$ collisions. The measured spectra are compared to next-to-leading order perturbative QCD calculations.

Journal Articles

Azimuthal correlations of electrons from heavy-flavor decay with hadrons in $$p+p$$ and Au+Au collisions at $$sqrt{s_{NN}}$$ = 200 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Aramaki, Y.*; et al.

Physical Review C, 83(4), p.044912_1 - 044912_16, 2011/04

 Times Cited Count:7 Percentile:48.98(Physics, Nuclear)

Measurements of electrons from the decay of open-heavy-flavor mesons have shown that the yields are suppressed in Au+Au collisions compared to expectations from binary-scaled $$p+p$$ collisions. Here we extend these studies to two particle correlations where one particle is an electron from the decay of a heavy flavor meson and the other is a charged hadron from either the decay of the heavy meson or from jet fragmentation. These measurements provide more detailed information about the interaction between heavy quarks and the quark-gluon matter. We find the away-side-jet shape and yield to be modified in Au+Au collisions compared to $$p+p$$ collisions.

Journal Articles

Measurement of neutral mesons in $$p$$ + $$p$$ collisions at $$sqrt{s}$$ = 200 GeV and scaling properties of hadron production

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review D, 83(5), p.052004_1 - 052004_26, 2011/03

 Times Cited Count:130 Percentile:1.59(Astronomy & Astrophysics)

The PHENIX experiment at RHIC has measured the invariant differential cross section for production of $$K^0_s$$, $$omega$$, $$eta'$$ and $$phi$$ mesons in $$p + p$$ collisions at $$sqrt{s}$$ = 200 GeV. The spectral shapes of all hadron transverse momentum distributions are well described by a Tsallis distribution functional form with only two parameters, $$n$$ and $$T$$, determining the high $$p_T$$ and characterizing the low $$p_T$$ regions for the spectra, respectively. The integrated invariant cross sections calculated from the fitted distributions are found to be consistent with existing measurements and with statistical model predictions.

Journal Articles

Status and result of the KSTAR upgrade for the 2010's campaign

Yang, H. L.*; Kim, Y. S.*; Park, Y. M.*; Bae, Y. S.*; Kim, H. K.*; Kim, K. M.*; Lee, K. S.*; Kim, H. T.*; Bang, E. N.*; Joung, M.*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03

Because the 2010 operation of Korea Superconducting Tokamak Advanced Research (KSTAR) mainly aims to achieve strongly elongated and diverted plasma, all the necessary hardware systems to provide an essential circumstance for the plasma shaping were newly installed and upgraded in 2010. In this paper, general configuration of the upgraded systems described earlier will be outlined. Moreover, several key performances and test results of the systems will be also reported in summary.

Journal Articles

Efficient production of a collimated MeV proton beam from a Polyimide target driven by an intense femtosecond laser pulse

Nishiuchi, Mamiko; Daido, Hiroyuki; Yogo, Akifumi; Orimo, Satoshi; Ogura, Koichi; Ma, J.-L.; Sagisaka, Akito; Mori, Michiaki; Pirozhkov, A. S.; Kiriyama, Hiromitsu; et al.

Physics of Plasmas, 15(5), p.053104_1 - 053104_10, 2008/05

 Times Cited Count:38 Percentile:14.54(Physics, Fluids & Plasmas)

High-flux energetic protons whose maximum energies are up to 4 MeV are generated by an intense femtosecond Titanium Sapphire laser pulse interacting with a 7.5, 12.5, and 25$$mu$$m thick Polyimide tape targets. The laser pulse energy is 1.7 J, duration is 34 fs, and intensity is 3$$times$$10$$^{19}$$Wcm$$^{-2}$$. The amplified spontaneous emission (ASE) has the intensity contrast ratio of 4$$times$$10$$^{-8}$$. The conversion efficiency from laser energy into proton kinetic energies of $$sim$$3% is achieved, which is comparable or even higher than those achieved in the previous works with nanometer-thick targets and the ultrahigh contrast laser pulses ($$sim$$10$$^{-10}$$).

Journal Articles

Simultaneous proton and X-ray imaging with femtosecond intense laser driven plasma source

Orimo, Satoshi; Nishiuchi, Mamiko; Daido, Hiroyuki; Yogo, Akifumi; Ogura, Koichi; Sagisaka, Akito; Li, Z.*; Pirozhkov, A. S.; Mori, Michiaki; Kiriyama, Hiromitsu; et al.

Japanese Journal of Applied Physics, Part 1, 46(9A), p.5853 - 5858, 2007/09

 Times Cited Count:15 Percentile:45.1(Physics, Applied)

A laser-driven proton beam with a maximum energy of a few MeV is stably obtained using an ultra-short and high-intensity Titanium Sapphire laser. At the same time, keV X-ray is also generated at almost the same place where protons are emitted. Here, we show the successful demonstration of simultaneous proton and X-ray projection images of a test sample placed close to the source with a resolution of $$sim$$10$$mu$$m, which is determined from the source sizes. Although the experimental configuration is very simple, the simultaneity is better than a few hundreds of ps. A CR-39 track detector and imaging plate, which are placed as close as possible to the CR-39, are used as detectors of protons and X-ray. The technique is applicable to the precise observation of microstructures.

Journal Articles

Development of laser driven proton sources and their applications

Daido, Hiroyuki; Sagisaka, Akito; Ogura, Koichi; Orimo, Satoshi; Nishiuchi, Mamiko; Mori, Michiaki; Ma, J.-L.; Pirozhkov, A. S.; Kiriyama, Hiromitsu; Kanazawa, Shuhei; et al.

Proceedings of 7th Pacific Rim Conference on Lasers and Electro-Optics (CLEO-PR 2007) (CD-ROM), p.77 - 79, 2007/00

We are developing a proton accelerator using an intense lasers with a focused intensity of $$>$$ 10$$^{17}$$ W/cm$$^{2}$$. To monitor proton energy spectra as well as plasma parameters at each laser shot, we are using real time detectors. The proton energy of MeV is stably obtained for applications.

Journal Articles

Intense femto-second laser-driven X-ray source coupled with multiple directional quantum beams for applications

Daido, Hiroyuki; Sagisaka, Akito; Ogura, Koichi; Orimo, Satoshi; Nishiuchi, Mamiko; Yogo, Akifumi; Mori, Michiaki; Li, Z.*; Kiriyama, Hiromitsu; Kanazawa, Shuhei; et al.

X-Ray Lasers 2006; Springer Proceedings in Physics, Vol.115, p.595 - 605, 2007/00

At present, using ultra-short high intensity lasers at APRC, JAEA Kansai photon research institute, we are developing laser driven multiple quantum beams such as protons, X-rays, electrons and THz waves. These beams are perfectly synchronized with each other. The pulse duration of each beam is lass than a pico-second. They have sharp directionality with high brightness. If we properly combined these, we have new pump-probe techniques for various applications.

Journal Articles

Resonant photoemission spectroscopy study of impurity-induced melting in Cr- and Ru-doped Nd$$_{1/2}$$A$$_{1/2}$$MnO$$_{3}$$ (A=Ca,Sr)

Kang, J.-S.*; Kim, J. H.*; Sekiyama, Akira*; Kasai, Shuichi*; Suga, Shigemasa*; Han, S. W.*; Kim, K. H.*; Choi, E. J.*; Kimura, Tsuyoshi*; Muro, Takayuki*; et al.

Physical Review B, 68(1), p.012410_1 - 012410_4, 2003/07


 Times Cited Count:19 Percentile:32.07(Materials Science, Multidisciplinary)

no abstracts in English

Oral presentation

Efficient production of MeV proton beam from a Polyimide target driven by an intense femto-second laser

Nishiuchi, Mamiko; Daido, Hiroyuki; Yogo, Akifumi; Orimo, Satoshi; Ogura, Koichi; Ma, J.-L.; Sagisaka, Akito; Mori, Michiaki; Pirozhkov, A. S.; Kiriyama, Hiromitsu; et al.

no journal, , 

The efficient proton beam whose maximum energy of up to 4 MeV was produced by the 50TW short pulse intensity Ti:Sap laser irradiated on the polyimide target [(C16H6O4N2)n] with the thicknesses of 7.5$$mu$$m, 12.5$$mu$$m, 25$$mu$$m, which is transparent to the 800nm laser. The laser parameters are energy of 1.7J, pulse width of 35fs and the intensity of 3$$times$$10$$^{19}$$Wcm$$^{-2}$$. The contrast of the ASE component is 4$$times$$10$$^{-8}$$. The conversion efficiency from laser energy into the proton kinetic energy is up to $$sim$$3%. This conversion efficiency is comparable or even higher than the results obtained with the same level laser ($$sim$$ J energy) interacts with the nano-meter level ultra thin target. In this paper we discuss on the comparison between our results and other experimental results obtained in other facilities.

Oral presentation

Applications of the high intensity short-pulse laser driven $$sim$$ MeV proton beam

Nishiuchi, Mamiko; Daito, Izuru; Ikegami, Masahiro; Mori, Michiaki; Orimo, Satoshi; Ogura, Koichi; Sagisaka, Akito; Yogo, Akifumi; Pirozhkov, A. S.; Ma, J.*; et al.

no journal, , 

A laser-driven proton beam with a maximum energy of a few MeV is stably obtained using an ultra-short and high-intensity Titanium Sapphire laser. As compared with the proton beam from the conventional accelerator, this proton beam exhibits peculiar characteristics, such as, more than 10$$^{13}$$ protons per bunch are produced within a short pulse duration of $$sim$$ps at a source, resulting in a very high peak current. It also exhibits a very low transverse emittance. The proton beam has a divergence angle of $$sim$$10 degrees and energy spread of $$sim$$100%. It accompanies electrons and X-rays, which is produced simultaneously. Making the best use of these peculiar characteristics, many possible applications of the laser-driven proton are proposed. In order to make practical laser-driven proton beam for the applications, we carry out series of experiments. We have successfully obtained simultaneous imaging of the target with proton and X-ray or proton and electron beams. In the course of practical use of the proton beam for specific applications, characteristics above should be optimized based on the variations of the applications. For example, in order to apply the laser-driven proton beam for the proton irradiation system, such as used in the medical or the industrial applications, we should obtain focused or parallel proton beam. One of our plans to alter the orbits of the laser-driven protons from the planer tape target is using permanent quadrupole magnets.

22 (Records 1-20 displayed on this page)