検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 18 件中 1件目~18件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Verification of probabilistic fracture mechanics analysis code PASCAL for reactor pressure vessel

Lu, K.; 高見澤 悠; Li, Y.; 眞崎 浩一*; 高越 大輝*; 永井 政貴*; 南日 卓*; 村上 健太*; 関東 康祐*; 八代醍 健志*; et al.

Mechanical Engineering Journal (Internet), 10(4), p.22-00484_1 - 22-00484_13, 2023/08

A probabilistic fracture mechanics (PFM) analysis code, PASCAL, has been developed by Japan Atomic Energy Agency for failure probability and failure frequency evaluation of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and thermal transients. To strengthen the applicability of PASCAL, considerable efforts on verifications of the PASCAL code have been made in the past years. As a part of the verification activities, a working group consisted of different organizations from industry, universities and institutes, was established in Japan. In the early phase, the working group focused on verifying the PFM analysis functions for RPVs in pressurized water reactors (PWRs) subjected to pressurized thermal shock (PTS) events. Recently, the PASCAL code has been improved in order to run PFM analyses for both RPVs in PWRs and boiling water reactors (BWRs) subjected to a broad range of transients. Simultaneously, the working group initiated a verification plan for the improved PASCAL through independent PFM analyses by different organizations. Concretely, verification analyses for a PWR-type RPV subjected to PTS transients and a BWR-type RPV subjected to a low-temperature over pressure transient were performed using PASCAL. This paper summarizes those verification activities, including the verification plan, analysis conditions and results. Based on the verification studies, the reliability of PASCAL for probabilistic integrity assessments of Japanese RPVs was confirmed with confidence.

論文

Mechanical properties of pure tungsten and tantalum irradiated by protons and neutrons at the Swiss spallation-neutron source

斎藤 滋; 鈴木 和博; 小畑 裕希; Dai, Y.*

Nuclear Materials and Energy (Internet), 34, p.101338_1 - 101338_9, 2023/03

 被引用回数:1 パーセンタイル:33.72(Nuclear Science & Technology)

固体ターゲットを用いる核破砕中性子源のターゲット材料及び被覆材料は、高エネルギー陽子及び核破砕中性子の照射により損傷を受ける。核破砕条件における材料の照射損傷特性を明らかにするために、スイスのPSIを中心として核破砕ターゲット材料照射プログラム(STIP: SINQ Target Irradiation Program)が進行中である。本プログラムでは、PSIの加速器で各種材料を580MeVの陽子で照射し、参加国がPIEを分担して行っている。原子力機構も照射試料の一部を輸送し、照射後試験を行った。本発表ではSTIP-II試料の中からWとTaの引張り試験の結果を報告する。これらの試料の照射条件は照射温度が130-380$$^{circ}$$C、はじき出し損傷量が10.2-35.0dpaであった。引張り試験の結果、WのうちW-Polyは照射によって脆化し、伸びがほぼ0で、弾性域で破断した。W-Sinは10.2dpa照射後も全伸び約6%を示し、延性を保っていた。Taは、10.3dpa照射試料が0.7-2.6%の全伸びを示したほかは伸びがほぼ0で、弾性域で破断した。

論文

Two-step Mott transition in Ni(S,Se)$$_2$$; $$mu$$SR studies and charge-spin percolation model

Sheng, Q.*; 金子 竜也*; Yamakawa, Kohtaro*; Guguchia, Z.*; Gong, Z.*; Zhao, G.*; Dai, G.*; Jin, C.*; Guo, S.*; Fu, L.*; et al.

Physical Review Research (Internet), 4(3), p.033172_1 - 033172_14, 2022/09

A pyrite system NiS$$_{2-x}$$Se$$_x$$ exhibits a bandwidth controlled Mott transition via (S,Se) substitutions in a two-step process: the antiferromagnetic insulator (AFI) to antiferromagnetic metal (AFM) transition at $$xsim$$0.45 followed by the AFM to paramagnetic metal (PMM) transition at $$xsim$$1.0. Among a few other Mott systems which exhibit similar two-step transitions, Ni(S,Se)$$_2$$ is of particular interest because a large intermediate AFM region in the phase diagram would provide unique opportunities to study the interplay between the spin and charge order. By comparing and combining our muon spin relaxation studies and previous neutron scattering studies, here we propose a picture where the spin order is maintained by the percolation of "nonmetallic" localized and dangling Ni moments surrounded by S, while the charge transition from AFI to AFM is caused by the percolation of the conducting paths generated by the Ni-Se-Ni bonds.

論文

Experimental validation of tensile properties measured with thick samples taken from MEGAPIE target

斎藤 滋; 鈴木 和博; 畠山 祐一; 鈴木 美穂; Dai, Y.*

Journal of Nuclear Materials, 534, p.152146_1 - 152146_16, 2020/06

 被引用回数:1 パーセンタイル:12.47(Materials Science, Multidisciplinary)

流動鉛ビスマス共晶合金(LBE)中で照射されたMEGAPIE(MEGAwatt Pilot Experiment)ターゲットからT91引張試験片を採取し、照射後試験(PIE)を行った。これらの試験片は照射試験における標準的な試験片と比べて2倍以上の厚さがあり、そのゲージ部の厚さと幅の比(t/w)は標準的な照射用試験片とは大きく異なる。PIEの結果、これらは標準的な試験片と比較して1.5-2.0倍大きな全伸び(TE)を示し、これよりt/wとTEは強く相関していることが示唆された。そこで、未照射の試料を用いて、引張り特性に対するt/wの影響を調べた。その結果、強度と均一伸びにはt/w依存性が見られないが、TEはt/wの増加とともに大きくなることが分かった。さらに実験データに基づいて、TEを様々なt/wの試験片と相関させることで、標準試験片を含む適切なTE値を評価できることを示した。

論文

Strong local moment antiferromagnetic spin fluctuations in V-doped LiFeAs

Xu, Z.*; Dai, G.*; Li, Y.*; Yin, Z.*; Rong, Y.*; Tian, L.*; Liu, P.*; Wang, H.*; Xing, L.*; Wei, Y.*; et al.

npj Quantum Materials (Internet), 5(1), p.11_1 - 11_7, 2020/02

 被引用回数:4 パーセンタイル:41.56(Materials Science, Multidisciplinary)

We use neutron scattering to study Vanadium (hole)-doped LiFe$$_{1-x}$$V$$_{x}$$As. In the undoped state, LiFeAs exhibits superconductivity at $$T_mathrm{c} = 18$$ K and transverse incommensurate spin excitations similar to electron overdoped iron pnictides. Upon Vanadium doping to form LiFe$$_{0.955}$$V$$_{0.045}$$, the transverse incommensurate spin excitations in LiFeAs transform into longitudinally elongated ones in a similar fashion to that of potassium (hole)-doped Ba$$_{0.7}$$K$$_{0.3}$$Fe$$_{2}$$As$$_{2}$$ but with dramatically enhanced magnetic scattering and elimination of superconductivity. This is different from the suppression of the overall magnetic excitations in hole-doped BaFe$$_{2}$$As$$_{2}$$ and the enhancement of superconductivity near optimal hole doping. These results are consistent with density function theory plus dynamic mean field theory calculations, suggesting that Vanadium doping in LiFeAs may induce an enlarged effective magnetic moment $$S_mathrm{eff}$$ with a spin crossover ground state arising from the inter-orbital scattering of itinerant electrons.

論文

Uniaxial pressure effect on the magnetic ordered moment and transition temperatures in BaFe$$_{2-x}$$T$$_{x}$$As$$_{2}$$ ($$T$$ = Co,Ni)

Tam, D. M.*; Song, Y.*; Man, H.*; Cheung, S. C.*; Yin, Z.*; Lu, X.*; Wang, W.*; Frandsen, B. A.*; Liu, L.*; Gong, Z.*; et al.

Physical Review B, 95(6), p.060505_1 - 060505_6, 2017/02

 被引用回数:23 パーセンタイル:71.84(Materials Science, Multidisciplinary)

We use neutron diffraction and muon spin relaxation to study the effect of in-plane uniaxial pressure on the antiferromagnetic (AF) orthorhombic phase in BaFe$$_{2-x}$$T$$_{x}$$As$$_{2}$$ and its Co- and Ni-substituted members near optimal superconductivity. In the low-temperature AF ordered state, uniaxial pressure necessary to detwin the orthorhombic crystals also increases the magnetic ordered moment, reaching an 11% increase under 40 MPa for BaFe$$_{1.9}$$Co$$_{0.1}$$As$$_2$$, and a 15% increase for BaFe$$_{1.915}$$Ni$$_{0.085}$$As$$_2$$. We also observe an increase of the AF ordering temperature ($$T_N$$) of about 0.25 K/MPa in all compounds, consistent with density functional theory calculations that reveal better Fermi surface nesting for itinerant electrons under uniaxial pressure. The doping dependence of the magnetic ordered moment is captured by combining dynamical mean field theory with density functional theory, suggesting that the pressure-induced moment increase near optimal superconductivity is closely related to quantum fluctuations and the nearby electronic nematic phase.

論文

Spin excitations in optimally P-doped BaFe$$_2$$(As$$_{0.7}$$P$$_{0.3}$$)$$_2$$ superconductor

Hu, D.*; Yin, Z.*; Zhang, W.*; Ewings, R. A.*; 池内 和彦*; 中村 充孝; Roessli, B.*; Wei, Y.*; Zhao, L.*; Chen, G.*; et al.

Physical Review B, 94(9), p.094504_1 - 094504_7, 2016/09

AA2016-0252.pdf:2.18MB

 被引用回数:15 パーセンタイル:59.61(Materials Science, Multidisciplinary)

最適Pドープされた超伝導体BaFe$$_2$$(As$$_{0.7}$$P$$_{0.3}$$)$$_2$$ (T$$_c$$=30K)におけるスピン励起の温度及びエネルギー依存性が非弾性中性子散乱実験を使って調べられた。我々の実験結果は密度汎関数理論や動的平均場理論で予想される計算結果と矛盾しておらず、BaFe$$_2$$(As$$_{0.7}$$P$$_{0.3}$$)$$_2$$における平均プニクトゲン高さの減少が、電子相関の強さを弱め、磁気励起の有効バンド幅の増加に寄与することを示唆している。

論文

Bend-fatigue properties of JPCA and Alloy800H specimens irradiated in a spallation environment

斎藤 滋; 菊地 賢司*; 濱口 大; 遠藤 慎也; 桜庭 直敏; 宮井 博充; 川合 將義*; Dai, Y.*

Journal of Nuclear Materials, 450(1-3), p.27 - 31, 2014/07

 被引用回数:0 パーセンタイル:0.01(Materials Science, Multidisciplinary)

核破砕中性子源やADSのビーム入射窓及び構造材料など核破砕条件における材料の照射損傷特性を明らかにするために、スイスのPSIを中心として核破砕ターゲット材料照射プログラム(STIP: SINQ Target Irradiation Program)が進行中である。本プログラムではPSIの加速器で各種材料を580MeVの陽子で照射し、参加国がPIEを分担して行っている。原子力機構も照射試料の一部を輸送し、照射後試験を行った。本発表ではSTIP-II試料の中からJPCAとAlloy800Hの曲げ疲労試験の結果を報告する。これらの試料の照射条件は照射温度が120-350$$^{circ}$$C、はじき出し損傷量が7.0-19.3dpaであった。JPCA鋼の曲げ疲労試験の結果、STIP-I試料と同様、照射前後で疲労寿命はほとんど変化はなく、疲労寿命の照射量依存性も見られなかった。試験後の破面観察の結果、粒界破面は見られなかった。この約19dpa照射されたJPCA鋼には約1600appmのHeが生成し、それらの多くが材料中に残留していると推定される。TEM観察でも、Heバブルが組織中にほぼ一様に分布しており、特に粒界析出が見られなかったことと一致する結果と考えられる。一方、Alloy800Hの破面には一部に粒界破面が観察された。

論文

Tensile mechanical properties of a stainless steel irradiated up to 19 dpa in the Swiss spallation neutron source

斎藤 滋; 菊地 賢司*; 濱口 大; 宇佐美 浩二; 遠藤 慎也; 小野 勝人; 松井 寛樹; 川合 將義*; Dai, Y.*

Journal of Nuclear Materials, 431(1-3), p.44 - 51, 2012/12

 被引用回数:2 パーセンタイル:17.83(Materials Science, Multidisciplinary)

核破砕中性子源やADSのビーム入射窓及び構造材料は、高エネルギー陽子及び核破砕中性子の照射により、損傷を受ける。核破砕条件における材料の照射損傷特性を明らかにするために、スイスのPSIを中心として核破砕ターゲット材料照射プログラム(STIP: SINQ Target Irradiation Program)が進行中である。本プログラムは1996年に始まり、PSIの加速器で各種材料を580MeVの陽子で照射し、参加国がPIEを分担して行っている。原子力機構も照射試料の一部を輸送し、照射後試験を行った。本論文ではSTIP-II試料の中からJPCA鋼の引張り試験の結果を報告する。引張り試験の結果、JPCA鋼は照射後大きく硬化するが、耐力の増加は11dpa付近で飽和した。伸びも大きく低下したが、全伸びは19.5dpa照射後も約15%保っていた。試験後の破面観察の結果、粒界破面や割れなどは見られなかった。このJPCA鋼には約1600appmのHeが生成していると見積もられ、表面からの反跳分を除いた多くが材料中に残留していると推定される。TEM観察でも、Heバブルが組織中にほぼ一様に分布しており、特に粒界析出が見られなかったことと一致する結果と考えられる。

報告書

Technical report on the Korea-Japan software collaboration

稲村 泰弘; So, J.-Y.*; 中島 健次; 鈴木 次郎*; 中谷 健; 梶本 亮一; 大友 季哉*; Moon, M.-K.*; Lee, C.-H.*; 安 芳次*; et al.

JAEA-Technology 2010-047, 74 Pages, 2011/02

JAEA-Technology-2010-047.pdf:15.03MB

この報告書は、日韓中性子チョッパー型分光器用ソフトウェア共同開発について2007年から2009年の2年間の活動内容をとりまとめたものである。共同開発の背景,開発作業の内容等について述べている。また、2010年以降に続く次の共同開発についての議論にも触れる。詳細な技術情報等は、付録として収録している。

論文

Proton irradiation effects on tensile and bend-fatigue properties of welded F82H specimens

斎藤 滋; 菊地 賢司*; 濱口 大; 宇佐美 浩二; 石川 明義; 西野 泰治; 遠藤 慎也; 川合 將義*; Dai, Y.*

Journal of Nuclear Materials, 398(1-3), p.49 - 58, 2010/03

 被引用回数:6 パーセンタイル:40.42(Materials Science, Multidisciplinary)

核破砕中性子源やADSのビーム入射窓及び構造材料は、高エネルギー陽子及び核破砕中性子の照射により、損傷を受ける。核破砕条件における材料の照射損傷特性を明らかにするために、スイスのPSIを中心として核破砕ターゲット材料照射プログラム(STIP; SINQ Target Irradiation Program)が立ち上がった。本プログラムは1996年に始まり、PSIの加速器で各種材料を580MeVの陽子で照射し、参加国がPIEを分担して行っている。原子力機構も照射試料の一部を輸送し、照射後試験を行った。本発表では照射後試験の結果からF82H鋼溶接材の引張り試験及び曲げ疲労試験の結果を報告する。引張り試験結果より、F82H鋼TIG及びEB溶接材は10dpa以上照射後も延性を保っていた。曲げ疲労試験の結果、F82H鋼母材は照射前後で疲労寿命はほとんど変化しなかった。F82H鋼溶接材は、疲労寿命が増加するものと10の7乗サイクル内で破断しないものがあった。

論文

Tensile properties of austenitic stainless steels irradiated at SINQ target 3

斎藤 滋; 菊地 賢司; 宇佐美 浩二; 石川 明義; 西野 泰治; 川合 將義*; Dai, Y.*

Journal of Nuclear Materials, 343(1-3), p.253 - 261, 2005/08

 被引用回数:9 パーセンタイル:53.26(Materials Science, Multidisciplinary)

核破砕中性子源やADSのターゲット及びビーム入射窓は、高エネルギー陽子と核破砕中性子の双方の照射を受ける。しかし、照射データは極めて乏しく、特に、核変換反応によって生じる大量のガス原子の影響は十分にわかっていない。そこで、スイスのポール・シェラー研究所(PSI)で、各種材料について590MeVプロトンの照射試験を行い、原研に輸送して照射後試験を行った。本発表では、3種類のオーステナイト鋼(SA-JPCA, SA-316F及びCW-316F)の引張り試験の結果について報告する。その結果、照射後の0.2%耐力は未照射材の3倍以上に増加し、破断歪みも未照射材の50%以上から20%前後へと低下したが、試験後の破面はいずれも延性破面であり、照射後も延性を維持していることがわかった。

論文

Bend-fatigue properties of 590 MeV proton irradiated JPCA and 316F SS

斎藤 滋; 菊地 賢司; 宇佐美 浩二; 石川 明義; 西野 泰治; 川合 將義*; Dai, Y.*

Journal of Nuclear Materials, 329-333(Part1), p.1093 - 1097, 2004/08

 被引用回数:6 パーセンタイル:40.81(Materials Science, Multidisciplinary)

核破砕中性子源やADSのターゲット及びビーム入射窓は、高エネルギー陽子及び核破砕中性子の照射により損傷を受ける。また、高エネルギー陽子の入射に伴って発生する圧力波及びビームトリップによる熱応力が核破砕ターゲットの容器材料に発生し、その応力成分は曲げが中心となる。材料の設計寿命や健全性評価には照射材の曲げ疲労データが必要である。スイスのポール・シェラー研究所(PSI)で陽子照射した鋼材の一部を原研に輸送し、照射後試験を行った。疲労試験には新たに開発したセラミックアクチュエーター式の曲げ疲労試験機を用いた。曲げ疲労試験の結果、同一変位に対する疲労寿命は、照射によって低下することがわかったが、照射条件と疲労寿命の関係は明確には見られなかった。破面のSEM観察の結果、多くの試料は延性破面であるが、360$$^{circ}$$Cで12.5dpa照射した316F-SAでは粒界破面も観察された。

口頭

Residual He gas analyses released from JPCA and F82H irradiated at SINQ target 3

菊地 賢司; 斎藤 滋; 辻本 和文; 川合 將義*; Dai, Y.*

no journal, , 

SINQターゲット3で照射した材料中に残留するヘリウム(4)ガスを質量分析器又は、ヘリウム漏洩検出器により測定した。材料はオーステナイトステンレス鋼のJPCAと核融合材料用に開発された低放射化フェライトマルテンサイト鋼のF82Hである。試料はTEMデスク又は試験後の引張試験片から採取した。試料を2000度まで加熱し、残留ガス全量を放出させた。測定量をこれまでに報告された他の鋼材に残留するガス量と比較した結果、50%以内で一致した。

口頭

高エネルギー陽子による核破砕材料照射実験の到達点と展望

菊地 賢司; 斎藤 滋; 遠藤 慎也; 濱口 大; Dai, Y.*

no journal, , 

陽子照射実験を、スイスPSI(ポールシェラー研究所)の施設で実施している。目的は、加速器駆動システム概念の設計とその実現性の証明に有効な材料データベースを作成することである。数多くの材料サンプルがターゲット内に収容され、585MeVの陽子サイクロトロンで照射された。照射済みのサンプルの試験は、JAEAを含む世界5か国の研究所で実施された。核破砕材料試験の到達点と今後の課題を概説するとともに、核破砕条件で使用される材料が受ける照射損傷の特徴について述べる。

口頭

Radiation intensity in high power liquid metal target

菊地 賢司; Dai, Y.*

no journal, , 

30MWの高出力標的では、陽子電流20mA,陽子エネルギー1.5GeVであり、高効率伝熱特性,照射損傷フリーという利点を有する液体金属を使用する。鉛ビスマスは、標的特性及び資源量の点において優れていることから、その第1候補ターゲットである。この強放射線場で、ビーム窓は年間陽子で5DPA,中性子で50DPAの照射損傷を受ける。一方、これまでPSIのSINQ標的を利用して実施した照射では、年間陽子で10DPA,中性子で10DPAの損傷場を実現した。DPAに及ぼす粒子依存性、及びHe生成量の評価が今後高力標的を実現するために明らかにすべき課題となることがわかった。

口頭

Mechanical properties of beam window materials for ADS irradiated in a spallation environment

斎藤 滋; 菊地 賢司*; 濱口 大; 遠藤 慎也; 宇佐美 浩二; 桜庭 直敏; 宮井 博充; 小野 勝人; 松井 寛樹; 川合 將義*; et al.

no journal, , 

ADSのビーム入射窓及び構造材料は、高エネルギー陽子及び核破砕中性子の照射により、損傷を受ける。核破砕条件における材料の照射損傷特性を明らかにするために、スイスのPSIを中心として核破砕ターゲット材料照射プログラム(STIP)が進行中である。STIPではPSIの加速器で各種材料を580MeVの陽子で照射し、参加国がPIEを分担して行っている。原子力機構も照射試料の一部を輸送し、照射後試験を行った。本発表ではSTIP-II試料の中からJPCA鋼について、引張り試験、曲げ疲労試験の結果を報告する。これらの試料の照射条件は照射温度が100-430$$^{circ}$$C、はじき出し損傷量が7.0-19.5dpaであった。引張り試験の結果、19dpa照射後も延性を保ち、破面も延性破面であることがわかった。曲げ疲労試験の結果、照射前後で疲労寿命の変化はほとんどなく、疲労寿命の照射量依存性も見られなかった。試験後の破面にも粒界破面は見られなかった。この約19dpa照射されたJPCA鋼には約1600appmのHeが生成し、それらの多くが材料中に残留していると推定される。TEM観察でも、Heバブルが組織中にほぼ一様に分布しており、特に粒界析出が見られなかったことと一致する結果と考えられる。

口頭

Tensile and ductile-brittle properties of the MEGAPIE samples evaluated by small punch (SP) tests

斎藤 滋; 涌井 隆; 塚田 学*; 山下 直輝; 佐野 成人; Dai, Y.*; 二川 正敏

no journal, , 

MEGAPIE(MEGAwatt Pilot Experiment)プロジェクトの照射後試験(PIE)が、原子力機構に割り当てられた試料について実施されている。本実験では、T91製ビーム窓(BW)などのMEGAPIEターゲットの構成機器から引張り試験片を採取した。照射温度は約250$$^{circ}$$C、はじき出し損傷レベルは0.75-1.74dpaであった。引張り試験後,試験済み試験片のグリップ部分からSP試験片を作製した。SP試験の試験温度は-150$$^{circ}$$Cから250$$^{circ}$$Cの範囲であった。SP試験の荷重-変位曲線(LDC)の面積から、延性-脆性遷移温度(DBTT)を評価した。これらのデータを過去のSTIP(SINQ Target Irradiation Programe)試料のPIEで得られたデータと比較したところ、同様の値を示した。また、SP試験結果から換算式を適用して降伏応力と最大引張強さを算出した。これらを引張り試験の結果と比較したところ、良く一致することがわかった。

18 件中 1件目~18件目を表示
  • 1