Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamano, Hidemasa; Kubo, Shigenobu; Kan, Taro*; Shibata, Akihiro*; Hourcade, E.*; Dirat, J. F.*
Proceedings of 29th International Conference on Nuclear Engineering (ICONE 29) (Internet), 10 Pages, 2022/08
In this paper, the approach to event tree development and the scope of the event tree analysis were described with key points on core catcher loading. For the analytical conditions, two core catcher loading conditions were given as bounding and conservative cases. For important heading of the event tree, key important phenomena were included: strong back design, fuel-coolant interaction and quench in the sodium plenum design, jet attack, criticality and coolability on the core catcher. In this paper, preliminary trial quantification was attempted using a probability ranking table which is based on engineering judgement. This event tree analysis has identified the dominant sequence, and clarified the effect of the core catcher loading and effectiveness of design measures. This study suggests that the criticality measure is very important for the core catcher study.
Yamano, Hidemasa; Kubo, Shigenobu; Sasa, Kyohei*; Shibata, Akihiro*; Hourcade, E.*; Dirat, J. F.*
Proceedings of 29th International Conference on Nuclear Engineering (ICONE 29) (Internet), 9 Pages, 2022/08
This paper describes coolability evaluations of a debris bed with a variety of decay heat removal system (DHRS) operating conditions with a whole vessel model assuming fuel accumulation on the core catcher in a short term. The evaluation tool is a one-dimensional plant dynamics code, Super-COPD, with a debris bed module. The coolability evaluations have indicated that the current core catcher design secures sufficient natural circulation flows around the core catcher to ensure the debris bed cooling when at least one circuit of DHRS was activated. Sensitivity analyses under a pessimistic condition have shown that the debris bed is coolable with at least one circuit of improved DHRS even if most of fuel accumulates on the core catcher in a short term.
Kato, Atsushi; Yamamoto, Tomohiko; Ando, Masato; Chikazawa, Yoshitaka; Murakami, Hisatomo*; Oyama, Kazuhiro*; Kaneko, Fumiaki*; Higurashi, Koichi*; Chanteclair, F.*; Chenaud, M.-S.*; et al.
EPJ Nuclear Sciences & Technologies (Internet), 8, p.11_1 - 11_10, 2022/06
This paper provides an overview of plant system studies to establish a common technical view for Sodium-cooled Fast Reactor concept between France and Japan based on ASTRID600 and the new concept with downsized output called ASTRID150. One of important issues on a reactor structure design is to enhance seismic resistance to be tolerable against strong earthquake such that postulated in Japan. A concept of High Frequency Design is shared, and the design options related to HFD have been examined and design recommendations are established. In addition, this paper include results of studies for a steam generator, a decay heat removal system, a fuel handling system and a containment vessel.
Yamamoto, Tomohiko; Matsubara, Shinichiro*; Harada, Hidenori*; Saunier, P.*; Martin, L.*; Gentet, D.*; Dirat, J.-F.*; Collignon, C.*
Nuclear Engineering and Design, 383, p.111406_1 - 111406_14, 2021/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Japan-France collaboration on ASTRID (Advanced Sodium Technological Reactor for Industrial Demonstration) project is launched in 2014. In this project, Japan-France evaluates core assemblies with interferences on seismic event. The object of this study is to verify the seismic evaluation method on core assemblies between Japan and France by comparing the results. The analysis of this benchmark calculation shows a satisfactory agreement between the Japanese and French tools and the figures show a good behavior of the core in horizontal direction under French seismic condition.
Takano, Kazuya; Sakamoto, Yoshihiko; Morohoshi, Kyoichi*; Okazaki, Hitoshi*; Gima, Hiromichi*; Teramae, Takuma*; Ikarimoto, Iwao*; Botte, F.*; Dirat, J.-F.*; Dechelette, F.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
ASTRID has the objective to integrate innovative options in order to prepare the 4th generation reactors. In ASTRID, large number of tubes are installed above each fuel subassembly to monitor the core. These instrumentations such as thermocouples (TC) and Failed Fuel Detection and Location (FFDL) systems are integrated into Above Core Structure (ACS) with various sizes tubes. In the present study, the routing study for TC tubes and FFDL tubes was performed with 3D modeling and mock-up experiment of the ACS designed for ASTRID with 1500 MW thermal power in order to clarify the integration process and secure the design hypotheses. Although some problems on fabricability were found in the mock-up experiment, the possible solutions were proposed. The present study gives manufacturing feedback to design team and will contribute to increase the knowledge for ACS design and fabricability.
Yamamoto, Tomohiko; Matsubara, Shinichiro*; Harada, Hidenori*; Saunier, P.*; Martin, L.*; Gentet, D.*; Dirat, J.-F.*; Collignon, C.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 8 Pages, 2019/05
Japan-France collaboration on ASTRID (Advanced Sodium Technological Reactor for Industrial Demonstration) project is launched in 2014. In this project, Japan-France evaluates core assemblies with interferences on seismic event. The object of this study is to verify the seismic evaluation method on core assemblies between Japan and France by comparing the results. The analysis of this benchmark calculation shows a satisfactory agreement between the Japanese and French tools and the figures show a good behavior of the core in horizontal direction under French seismic condition.
Matsuo, Eiji*; Sasa, Kyohei*; Koyama, Kazuya*; Yamano, Hidemasa; Kubo, Shigenobu; Hourcade, E.*; Bertrand, F.*; Marie, N.*; Bachrata, A.*; Dirat, J. F.*
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 5 Pages, 2019/05
Discharged molten-fuel from the core during Core Disruptive Accident (CDA) could become solidified particle debris by fuel-coolant interaction in the lower sodium plenum, and then the debris could form a bed on a core catcher located at the bottom of the reactor vessel. Coolability evaluations for the debris bed are necessary for the design of the core catcher. The purpose of this study is to evaluate the coolability of the debris bed on the core catcher for the ASTRID design. For this purpose, as a first step, the coolability calculations of the debris beds formed both in short term and later phase have been performed by modeling only the debris bed itself. Thus, details of core catcher design and decay heat removal system are not described in this paper. In all the calculations, coolant temperature around the debris bed is a parameter. The calculation tool is the debris bed module implemented into a one-dimensional plant dynamics code, Super-COPD. The evaluations have shown that the debris beds formed both in short term and later phase are coolable by the design which secures sufficient coolant flow around the core catcher located in the cold pool.
Onoda, Yuichi; Chikazawa, Yoshitaka; Nakamura, Hironori*; Barbier, D.*; Dirat, J.-F.*
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05
no abstracts in English
Hourcade, E.*; Mihara, Takatsugu; Dauphin, A.*; Dirat, J.-F.*; Ide, Akihiro*
Proceedings of 2018 International Congress on Advances in Nuclear Power Plants (ICAPP 2018) (CD-ROM), p.556 - 561, 2018/04
In the framework of the French-Japanese agreement signed in 2014, CEA, AREVA NP, JAEA, and MHI/MFBR is jointly performing components design of ASTRID such as Decay Heat Removal Systems (DHRS). This paper is giving an update concerning ASTRID DHR strategy with description of reference architecture evolution and project objectives. In particular, new developments were made for DHR during normal shutdown and role of Ex-Vessel system. A special focus is made on design process of automatic shutter to hydraulically connect Hot Plenum and cold plenum to enhance primary vessel natural convection.
Hourcade, E.*; Curnier, F.*; Mihara, Takatsugu; Farges, B.*; Dirat, J.-F.*; Ide, Akihiro*
Proceedings of 2016 International Congress on Advances in Nuclear Power Plants (ICAPP 2016) (CD-ROM), p.1740 - 1745, 2016/04
In the framework of the French-Japanese agreement signed in 2014, CEA, AREVA NP, JAEA, and MHI/MFBR is jointly performing components design of ASTRID such as Decay Heat Removal Systems (DHRS). This paper is giving highlights of ASTRID DHRS current strategy. Focus is made on operating temperature diversification for in-vessel heat exchanger as well as core catcher coolability by an original features such as heat exchanger located within reactor cold pool, whose design was taken over by Japan team since 2014.
