Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakasegawa, Hideo; Tanigawa, Hiroyasu; Kano, Sho; Enomoto, Masato*
Fusion Engineering and Design, 86(9-11), p.2541 - 2544, 2011/10
Times Cited Count:16 Percentile:74.61(Nuclear Science & Technology)Reduced Activation Ferritic/Martensitic steels (RAFMs) are leading candidates for the structural material of DEMO blanket module. Through the Broader Approach (BA) activity in Japan, the fabrication techniques for the DEMO blanket module has been studied and developed. In the techniques, the development of joining technique is especially important for fabricating the complicated structure of blanket module. In particular, Hot Isostatic Pressing (HIP) has been applied to joining cooling channels with a rectangular cross section. During and after HIP, the structural material are exposed to various heat treatments such as holding at the HIP temperature, following furnace cooling, 2nd normalizing to refine austenite grains, and 2nd tempering. Microstructural evolutions during these various heat treatments should be focused, because they determine the performance of the blanket module. Especially, fine precipitates such as tantalum and vanadium carbides precipitated at high temperatures greatly affect the creep property, the material toughness, and irradiation resistances of RAF as the structural material. In this work, we have studied the stability of fine precipitates in the F82H-BA07 heat (8Cr-2W-V, Ta) during simulated heat treatments of the blanket fabrication.
Tanigawa, Hiroyasu; Sokolov, M. A.*; Sawahata, Atsushi*; Hashimoto, Naoyuki*; Ando, Masami; Shiba, Kiyoyuki; Enomoto, Masato*; Klueh, R. L.*
Journal of ASTM International (Internet), 6(5), 10 Pages, 2009/05
The master curve (MC) method works when the transition fracture toughness values follow the MC, and once the value is scaled properly, the MC is usually independent of the type of steel or the type of test specimen. This method is very much depending on the assumption that the fracture initiation points are homogeneously distributed and its initiation mechanism is independent on test temperature. The reduced-activation ferritic/martensitic steels (RAFs), such as F82H (Fe-8Cr-2W-0.2V-0.04Ta), has AlO
Ta(V,Ti)O composite inclusions, or simple Ta(V)O inclusions, and shows inhomogeneous distribution, and it was revealed that that RAFs which contain Ta could initiate the facture in the different mechanism at lower temperature as the composite inclusions become fragile, and this should be considered when the toughness measured with small size toughness specimen which is usually tested at lower temperature.
Sawahata, Atsushi; Tanigawa, Hiroyasu; Enomoto, Masato*
Nihon Kinzoku Gakkai-Shi, 72(3), p.176 - 180, 2008/03
Times Cited Count:14 Percentile:58.52(Metallurgy & Metallurgical Engineering)no abstracts in English
Tanigawa, Hiroyasu; Sawahata, Atsushi; Sokolov, M. A.*; Enomoto, Masato*; Klueh, R. L.*; Koyama, Akira*
Materials Transactions, 48(3), p.570 - 573, 2007/03
Times Cited Count:22 Percentile:71.21(Materials Science, Multidisciplinary)The effects of microstructural inhomogeneity of F82H-IEA was investigated focusing on inclusion. It turned out that Ta does not form MX precipitates, but it forms complex AlO
;Ta(V,Ti)O inclusions, or simple Ta(V)O inclusions. The complex inclusions are rather dominant in the plate obtained from the bottom of the ingot, but not in the plate from the middle of the ingot. SEM observations also revealed that broken complex inclusions tended to be observed at the crack-initiation site. These results suggest that the scatter of toughness values is correlated with this microstructural inhomogeneity, as the MC method assumes the material has a homogeneous microstructure.
Sawahata, Atsushi; Tanigawa, Hiroyasu; Shiba, Kiyoyuki; Enomoto, Masato*
Nihon Kinzoku Gakkai-Shi, 71(2), p.244 - 248, 2007/02
Times Cited Count:1 Percentile:12.88(Metallurgy & Metallurgical Engineering)Reduced activation ferritic/martensitic steels (RAFs), such as F82H (Fe-8Cr-2W-0.2V-0.04Ta-0.1C), are one of the leading candidates for structural materials of fusion reactors, and it is essential for RAFs R&D to assure its good toughness property for fusion application. In this study, the influence of Ti on impact property was studied based on microstructural analyses and charpy impact tests which were performed against general-purity F82H (0.004Ti-0.0060N) and high-purity F82H (0.001Ti- 0.0014N). In general-purity F82H, its impact property around DBTT showed both 100% brittle fracture and brittle-ductile, and this tendency is not appeared in high-purity F82H. SEM observation on those brittle fracture surfaces of general-purity F82H revealed the presence of Al
O
-Ta(V,Ti)O complex oxides at the fracture initiation point. The size distribution analyses of oxides suggest that the complex oxide in general-purity F82H showed a higher number density than in high-purity F82H. In addition to this, EDS analyses showed the complex oxides in general-purity F82H had a strong peak of Ti, but they were not detected in the oxide in high-purity F82H. These results suggest the influence of Ti on complex oxide formation which affects impact property.
Nagame, Yuichiro; Tsukada, Kazuaki; Asai, Masato; Toyoshima, Atsushi; Akiyama, Kazuhiko; Ishii, Yasuo; Sato, Tetsuya; Hirata, Masaru; Nishinaka, Ichiro; Ichikawa, Shinichi; et al.
Radiochimica Acta, 93(9-10), p.519 - 526, 2005/00
Times Cited Count:31 Percentile:87.26(Chemistry, Inorganic & Nuclear)no abstracts in English
Haba, Hiromitsu*; Tsukada, Kazuaki; Asai, Masato; Toyoshima, Atsushi; Akiyama, Kazuhiko; Nishinaka, Ichiro; Hirata, Masaru; Yaita, Tsuyoshi; Ichikawa, Shinichi; Nagame, Yuichiro; et al.
Journal of the American Chemical Society, 126(16), p.5219 - 5224, 2004/04
Times Cited Count:44 Percentile:72.62(Chemistry, Multidisciplinary)Fluoride complexation of element 104, rutherfordium (Rf), produced in the Cm(
O,5n)
Rf reaction has been studied by anion-exchange chromatography on an atom-at-a-time scale. The anion-exchangechromatographic behavior of Rf was investigated in 1.9-13.9 M hydrofluoric acid together with those of the group-4 elements Zr and Hf produced in the
O-induced reactions on Ge and Gd targets, respectively. It was found that the adsorption behavior of Rf on anion-exchange resin is quite different from those of Zr and Hf, suggesting the influence of relativistic effect on the fluoride complexation of Rf.
Sakasegawa, Hideo; Tanigawa, Hiroyasu; Kano, Sho; Enomoto, Masato*
no journal, ,
no abstracts in English
Kano, Sho; Tanigawa, Hiroyasu; Sakasegawa, Hideo; Enomoto, Masato*
no journal, ,
no abstracts in English
Sawahata, Atsushi; Tanigawa, Hiroyasu; Shiba, Kiyoyuki; Enomoto, Masato*
no journal, ,
Reduced activation ferritic/martensitic steels (RAFs), such as F82H (Fe-8Cr-2W-0.2V-0.04Ta-0.1C, in wt%), are one of the leading candidates for structural materials of fusion reactors. Impact property of F82H can be improved by adjusting the amount of tantalum or titanium concentration. On the other hand, it was reported by microstructure analyses of IEA steel that tantalum has a tendency to form oxides and causes a large dispersion of fracture toughness. In this study, the correlation between titanium or tantalum concentration and the impact property were reported focusing on difference in microstructure.
Kano, Sho; Enomoto, Masato*; Sakasegawa, Hideo; Tanigawa, Hiroyasu; Kondo, Keietsu; Nogiwa, Kimihiro; Toyama, Takeshi*; Nagai, Yasuyoshi*
no journal, ,
no abstracts in English