Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sato, Yutaka*; Kokawa, Hiroyuki*; Fujii, Hiromichi*; Yano, Yasuhide; Sekio, Yoshihiro
Metallurgical and Materials Transactions A, 46(12), p.5789 - 5800, 2015/12
Times Cited Count：15 Percentile：58.53(Materials Science, Multidisciplinary)Dissimilar friction stir welding (FSW) of an 11% Cr ferritic/martensitic stee (PNC-FMS) to 316-grade austenitic stainless steel was attempted with a view to its potential application to the wrapper tubes of next-generation fast reactors. The mechanical properties and microstructure of the resulting welds were systematically examined, which revealed that FSW produces a defect-free stir zone in which material intermixing is notably absent. That is, both steels are separately distributed along a zigzagging interface in the stir zone when PNC-FMS is placed on the retreating side, with the tool plunging at the butt line. This interface did not act as a fracture site during small-sized tensile testing of the stir zone. Furthermore, the microstructure of the stir zone was refined in both the PNC-FMS and 316 stainless steel sides, resulting in improved mechanical properties over the respective base material regions.
Kumazawa, Mineo; Kunitomo, Takahiro; Nakajima, Takahiro; Tsuruga, Kayoko*; Hasada, Yoko*; Nagao, Hiromichi*; Matsumoto, Hiroshi*; Kasahara, Junzo*; Fujii, Naoyuki; Shigeta, Naotaka
JAEA-Research 2007-033, 155 Pages, 2007/03
JAEA-Research-2007-033.pdf:11.04MB
The developmental study made at Tono Geoscience Center under the Earthquake Frontier Research Project since 1996 is reported for a brand new technology system called ACROSS (Accurately Controlled, Routinely Operated, Signal System). Several examples of the field application are demonstrated by the test experiments at Tono Mine site. After the developmental works of 10 years, the ACROSS is brought to be a practical method applied to the remote monitoring of temporal variation of underground states at the Horonobe Underground Research Laboratory and also it is being applied to the expected focal region of the coming Tokai earthquake near Hamaoka in Shizuoka prefecture. Whereas ACROSS technology is not mature enough yet, it is shown to be a potential and versatile methodology applied even for the health monitoring of the construction such as building strongly coupled with the ground in addition to the underground study.
Tsuruga, Kayoko; Ogawa, Katsuro*; Nagao, Hiromichi; Hasada, Yoko; Fujii, Naoyuki*; Kasahara, Junzo; Kumazawa, Mineo
Chigaku Zasshi, 114(4), p.659 - 664, 2005/04
The 1st International Workshop on 'Active Monitoring in the Solid Earth Geophysics' was held in Mizunami city, Gifu, from June 30, 2004 to July 2. This paper discusses the significance of the active monitoring of the earth, and reports the summary of the workshop.
Sekio, Yoshihiro; Yamashita, Shinichiro; Sakaguchi, Norihito*; Shibayama, Tamaki*; Watanabe, Seiichi*; Tokita, Shun*; Fujii, Hiromichi*; Sato, Yutaka*; Kokawa, Hiroyuki*
no journal, ,
In order to improve ductility loss by helium embrittlement (or grain boundary embrittlement) induced under high temperature and neutron irradiation dose in nickel alloys which are expected to have high-temperature phase stability under non-irradiation, the grain boundary engineering was applied for NIMONIC PE16 to enhance the grain boundary strength. And, its high temperature tensile properties under non-irradiation were investigated as the first approach. As a result, the temperature dependence of the yield stress in the grain boundary engineered (GBE) PE16 was similar to that in NIMINIC PE16, but the yield stress was slightly lower and the uniform elongation was slightly higher at each temperature in GBE PE16 comparing to NIMINIC PE16. This would be caused by grain coarsening due to some heat treatments. If the gain size of GBE PE16 is optimized, tensile properties of GBE PE16 would be the same or more than that of NIMONIC PE16.
Yamashita, Shinichiro; Sekio, Yoshihiro; Sakaguchi, Norihito*; Shibayama, Tamaki*; Watanabe, Seiichi*; Tokita, Shun*; Fujii, Hiromichi*; Sato, Yutaka*; Kokawa, Hiroyuki*
no journal, ,
no abstracts in English
