Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Miura, Akihiko; Kawane, Yusuke*; Moriya, Katsuhiro; Futatsukawa, Kenta*; Miyao, Tomoaki*; Fukuoka, Shota*
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.2183 - 2186, 2018/06
In order to mitigate the beam loss during a beam transportation in the high-brilliant accelerator facilities, wire-based profile monitors are used to measure by both transverse and longitudinal beam profiles using wire-scanner monitors and bunch-shape monitors for the tuning of quadrupole magnets and buncher cavities. Signals are generated due to the direct interaction between a metallic wire and beam. We have used the tungsten wire as a high melting-point material by estimation of heat loading during the impact of beam particles. In addition, a spring is applied for the relaxing a flexure under wire's own weight. A tensile fracture test is conducted by supplying an electrical current as a simulated beam loading. As the results, we obtained the relation between the thermal limit to fracture and tension loading of tungsten wire.
Miura, Akihiko; Fukuoka, Shota*; Miyao, Tomoaki*; Kawane, Yusuke*; Futatsukawa, Kenta*
Proceedings of 14th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.560 - 562, 2017/12
no abstracts in English
Miura, Akihiko; Hayashi, Naoki; Maruta, Tomofumi*; Liu, Y.*; Miyao, Tomoaki*; Fukuoka, Shota*
Proceedings of 4th International Beam Instrumentation Conference (IBIC 2015) (Internet), p.386 - 389, 2016/02
We have used bunch shape monitors (BSMs) to measure the longitudinal bunch length of negative hydrogen ion beam in the J-PARC linac. In order to evaluate the measurement errors with peak beam current increasing, we observed waveforms with various beam current. As the result, an RMS bunch length depends on the peak beam current and the bending at the pulse head grows with the peak beam current. We also compared the data taken at an off-center beam to avoid the thermal stress with the ones at an on-center beam, because a target wire will be exposed to a higher peak beam current. In this paper, we introduced the peak beam current dependence of the bunch length waveforms, and an effect of on- /off-centering of the wire position. Finally the new buncher tuning method using one BSM have been discussed.
Futatsukawa, Kenta*; Kawane, Yusuke; Tamura, Jun; Nemoto, Yasuo; Hayashi, Naoki; Fukuoka, Shota*; Mayama, Minoru*; Miura, Akihiko; Miyao, Tomoaki*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1246 - 1250, 2015/09
no abstracts in English
