Tailoring neutron-shielding boron-metakaolin geopolymers with BC filler; Surfactant-driven interfacial and microstructural control

Niu, X.*; Elakneswaran, Y.*; Kikuchi, Ryosuke*; Li, A.*; Seralathan, S.*; Hiraki, Yoshihisa; Sato, Junya; Osugi, Takeshi; Kamiyama, Takashi*; Walkley, B.*

Cement and Concrete Research, 200, p.108096_1 - 108096_17, 2026/02

https://doi.org/10.1016/j.cemconres.2025.108096

Brightening triplet excitons enable high-performance white-light emission in organic small molecules via integrating n-- transitions

Yang, Q.*; Yang, X.*; Wang, Y.*; Fei, Y.*; Li, F.*; Zheng, H.*; Li, K.*; Han, Y.*; Hattori, Takanori; Zhu, P.*; et al.

Nature Communications (Internet), 15, p.7778_1 - 7778_9, 2024/09

https://doi.org/10.1038/s41467-024-52196-7

Luminescent materials that simultaneously embody bright singlet and triplet excitons hold great potential in optoelectronics, signage, and information encryption. However, achieving high-performance white-light emission is severely hampered by their inherent unbalanced contribution of fluorescence and phosphorescence. Herein, we address this challenge by pressure treatment engineering via hydrogen bonding cooperativity effect to realize the mixture of n-- transitions, where the triplet state emission was boosted from 7% to 40% in isophthalic acid (IPA). A superior white-light emission based on hybrid fluorescence and phosphorescence was harvested in pressure-treated IPA, and the photoluminescence quantum yield was increased to 75% from the initial 19% (blue-light emission). In-situ high-pressure IR spectra, X ray diffraction, and neutron diffraction reveal continuous strengthening of the hydrogen bonds with the increase of pressure. Furthermore, this enhanced hydrogen bond is retained down to the ambient conditions after pressure treatment, awarding the targeted IPA efficient intersystem crossing for balanced singlet/triplet excitons population and resulting in efficient white-light emission. This work not only proposes a route for brightening triplet states in organic small molecule, but also regulates the ratio of singlet and triplet excitons to construct high-performance white-light emission.

Assessment of radioactive contamination and effectiveness of remedial measures in urban environments, Report of Working Group 2, Modelling and Data for Radiological Impact Assessments (MODARIA) Programme

Boznar, M. Z.*; Charnock, T. W.*; Chouhan, S. L.*; Grsic, Z.*; Halsall, C.*; Heinrich, G.*; Helebrant, J.*; Hettrich, S.*; Kua, P.*; Mancini, F.*; et al.

IAEA-TECDOC-2001, 226 Pages, 2022/06

https://www.iaea.org/publications/15122/assessment-of-radioactive-contamination-and-effectiveness-of-remedial-measures-in-urban-environments

The IAEA organized a programme from 2012 to 2015 entitled Modelling and Data for Radiological Impact Assessments (MODARIA), which aimed to improve capabilities in the field of environmental radiation dose assessment by acquiring improved data, model testing and comparison of model inputs, assumptions and outputs, reaching a consensus on modelling philosophies, aligning approaches and parameter values, developing improved methods and exchanging information. This publication describes the activities of Working Group 2, Exposures in Contaminated Urban Environments and Effect of Remedial Measures.

Negative hydrogen ion sources for particle accelerators; Sustainability issues and recent improvements in long-term operations

Welton, R.*; Bollinger, D.*; Dehnel, M.*; Draganic, I.*; Faircloth, D.*; Han, B.*; Lettry, J.*; Stockli, M.*; Tarvainen, O.*; Ueno, Akira

Journal of Physics; Conference Series, 2244, p.012045_1 - 012045_13, 2022/04

https://doi.org/10.1088/1742-6596/2244/1/012045

High brightness, negative hydrogen ion sources are used extensively in many scientific facilities operating worldwide. Negative hydrogen beams have become the preferred means of filling circular accelerators and storage rings. Several facilities now have long-term ( several years) experience with operating a variety of these sources (RF, filament, magnetron and penning) and have encountered, and in some cases solved, performance limiting issues. A representative list of such facilities includes, the US Spallation Neutron Source (SNS), Japan Proton Accelerator Complex (J-PARC), Rutherford Appleton Laboratory (RAL-ISIS), Los Alamos Neutron Science Center (LANSCE), Fermi National Accelerator Laboratory (FNAL), CERN LINAC-4 and numerous installations of D-Pace ion sources. This report summarizes key ion source sustainability issues encountered at these facilities and discusses how some of them are being addressed through recent source improvements.

Evaluation report of Task 9B based on comparisons and analyses of modelling results for the sp HRL LTDE-SD experiments

Soler, J. M.*; Meng, S.*; Moreno, L.*; Neretnieks, I.*; Liu, L.*; Keklinen, P.*; Hokr, M.*; ha, J.*; Vetenk, A.*; Reimitz, D.*; et al.

SKB TR-20-17, 71 Pages, 2021/07

Task 9B of the SKB Task Force on Modelling of Groundwater Flow and Transport of Solutes in fractured rock focused on the modelling of experimental results from the LTDE-SD in situ tracer test performed at the sp Hard Rock Laboratory in Sweden. Ten different modelling teams provided results for this exercise, using different concepts and codes. Three main types of modelling approaches were used: (1) analytical solutions to the transport-retention equations, (2) continuum-porous-medium numerical models, and (3) microstructure-based models accounting for small-scale heterogeneity (i.e. mineral grains and microfracture distributions). The modelling by the different teams allowed the comparison of many different model concepts, especially in terms of potential zonations of rock properties (porosity, diffusion, sorption), such as the presence of a disturbed zone at the rock and fracture surface, the potential effects of micro- and cm-scale fractures.

Soft, skin-interfaced microfluidic systems with integrated immunoassays, fluorometric sensors, and impedance measurement capabilities

Kim, S.*; Lee, B.*; Reeder, J. T.*; Seo, S. H.*; Lee, S.-U.*; Hourlier-Fargette, A.*; Shin, J.*; Sekine, Yurina; Jeong, H.*; Oh, Y. S.*; et al.

Proceedings of the National Academy of Sciences of the United States of America, 117(45), p.27906 - 27915, 2020/11

https://doi.org/10.1073/pnas.2012700117

In this study, we present a wireless, battery-free, skin-interfaced microfluidic system that combines lateral flow immunoassay for sweat cortisol assay, fluorometric imaging of glucose and ascorbic acid (vitamin C) assays, and digital tracking of sweat rate using electrodes that measure skin galvanic response. Systematic benchtop testing and on-body field studies on human subjects exercising in a gym environment highlight the key multifunctional features of this platform in tracking the biochemical correlates of physical stress.

Spin transport in insulators without exchange stiffness

Oyanagi, Koichi*; Takahashi, Saburo*; Cornelissen, L. J.*; Shan, J.*; Daimon, Shunsuke*; Kikkawa, Takashi*; Bauer, G. E. W.*; Van Wees, B. J.*; Saito, Eiji

Nature Communications (Internet), 10, p.4740_1 - 4740_6, 2019/10

AA2022-0370.pdf:0.93MB

https://doi.org/10.1038/s41467-019-12749-7

Computation speeds and memory requirements of mesh-type ICRP reference computational phantoms in Geant4, MCNP6, and PHITS

Yeom, Y. S.*; Han, M. C.*; Choi, C.*; Han, H.*; Shin, B.*; Furuta, Takuya; Kim, C. H.*

Health Physics, 116(5), p.664 - 676, 2019/05

https://doi.org/10.1097/HP.0000000000000999

Recently, Task Group 103 of the ICRP developed the mesh-type reference computational phantoms (MCRPs), which are planned for use in future ICRP dose coefficient calculation. Performance of major Monte Carlo particle transport codes (Geant4, MCNP6, and PHITS) were tested with MCRP. External and internal exposure of various particles and energies were calculated and the computational times and required memories were compared. Additionally calculation for voxel-mesh phantom was also conducted so that the influence of different mesh-representation in each code was studied. Memory usage of MRCP was as large as 10 GB with Geant4 and MCNP6 while it is much less with PHITS (1.2 GB). In addition, the computational time required for MRCP tends to increase compared to voxel-mesh phantoms with Geant4 and MCNP6 while it is equal or tends to decrease with PHITS.

Battery-free, skin-interfaced microfluidic/electronic systems for simultaneous electrochemical, colorimetric, and volumetric analysis of sweat

Bandodkar, A. J.*; Gutruf, P.*; Choi, J.*; Lee, K.-H.*; Sekine, Yurina; Reeder, J. T.*; Jeang, W. J.*; Aranyosi, A. J.*; Lee, S. P.*; Model, J. B.*; et al.

Science Advances (Internet), 5(1), p.eaav3294_1 - eaav3294_15, 2019/01

https://doi.org/10.1126/sciadv.aav3294

Interest in advanced wearable technologies increasingly extends beyond systems for biophysical measurements to those that enable continuous, non-invasive monitoring of biochemical markers in biofluids. Here, we introduce battery-free, wireless microelectronic platforms that perform sensing via schemes inspired by the operation of biofuel cells. Combining these systems in a magnetically releasable manner with chrono-sampling microfluidic networks that incorporate assays based on colorimetric sensing yields thin, flexible, lightweight, skin-interfaced technologies with broad functionality in sweat analysis. A demonstration device allows simultaneous monitoring of sweat rate/loss, along with quantitative measurements of pH and of lactate, glucose and chloride concentrations using biofuel cell and colorimetric approaches.

Multi-threading performance of Geant4, MCNP6, and PHITS Monte Carlo codes for tetrahedral-mesh geometry

Han, M. C.*; Yeom, Y. S.*; Lee, H. S.*; Shin, B.*; Kim, C. H.*; Furuta, Takuya

Physics in Medicine & Biology, 63(9), p.09NT02_1 - 09NT02_9, 2018/05

https://doi.org/10.1088/1361-6560/aabd20

The multi-threading computation performances of the Geant4, MCNP6, and PHITS codes were evaluated using three tetrahedral-mesh phantoms with different complexity. Photon and neutron transport simulations were conducted and the initialization time, calculation time, and memory usage were measured as a function of the number of threads N used in the simulation. The initialization time significantly increases with the complexity of the phantom, but not much with the number of the threads. For the calculation time, Geant4 showed good parallelization efficiency with multi-thread computation (30 times speed-up factor for N = 40) adopting the private tallies while saturation of the speed-up factor were observed in MCNP6 and PHITS (10 and a few times for N = 40) due to the time delay for the sharing tallies. On the other hand, Geant4 requires larger memory specification and the memory usage rapidly increases with the number of threads compared to MCNP6 or PHITS. It is notable that when compared to the other codes, the memory usage of PHITS is much smaller, regardless of both the complexity of the phantom and the number of the threads.