Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Hirata, Yoshinobu*; Nakagawa, Hiroshi; Yamauchi, Hiroki; Kaneko, Koji; Hagihara, Masato; Yamaguchi, Hideyuki*; Omoto, Chie*; Katsuno, Nakako*; Imaizumi, Teppei*; Nishizu, Takahisa*
Food Hydrocolloids, 141, p.108728_1 - 108728_7, 2023/08
Crystallinity is reflected in the mechanical properties of foods and materials. Crystallinity should be related to the structural dynamics of starch. In this study, we used quasi-elastic neutron scattering (QENS) to investigate changes in the molecular dynamics of cooked rice starch during retrogradation. The width of the measured QENS narrowed with retrogradation. The elastic incoherent structure factor (EISF) increased, which indicated that the molecular dynamics are spatially suppressed upon retrogradation. Analysis of EISF with a bimodal continuous diffusion model, where low and high mobilities are assumed to correspond to crystalline and amorphous phases, respectively, showed that the fraction of the low-mobility component increases with retrogradation.
Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.
Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12
Times Cited Count:6 Percentile:52.8(Geosciences, Multidisciplinary)The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.
Itoi, Hiroyuki*; Ninomiya, Takeru*; Hasegawa, Hideyuki*; Maki, Shintaro*; Sakakibara, Akihiro*; Suzuki, Ryutaro*; Kasai, Yuto*; Iwata, Hiroyuki*; Matsumura, Daiju; Owada, Mao*; et al.
Journal of Physical Chemistry C, 124(28), p.15205 - 15215, 2020/07
Times Cited Count:8 Percentile:40.97(Chemistry, Physical)Tang, T. L.*; Uesaka, Tomohiro*; Kawase, Shoichiro; Beaumel, D.*; Dozono, Masanori*; Fujii, Toshihiko*; Fukuda, Naoki*; Fukunaga, Taku*; Galindo-Uribarri, A.*; Hwang, S. H.*; et al.
Physical Review Letters, 124(21), p.212502_1 - 212502_6, 2020/05
Times Cited Count:14 Percentile:74.77(Physics, Multidisciplinary)The structure of a neutron-rich F nucleus is investigated by a quasifree () knockout reaction. The sum of spectroscopic factors of orbital is found to be 1.0 0.3. The result shows that the O core of F nucleus significantly differs from a free O nucleus, and the core consists of 35% O, and 65% excited O. The result shows that the O core of F nucleus significantly differs from a free O nucleus. The result may infer that the addition of the proton considerably changes the neutron structure in F from that in O, which could be a possible mechanism responsible for the oxygen dripline anomaly.
Kudo, Hideyuki*; Otani, Yuichi*; Hara, Masahide*; Kato, Atsushi; Otaka, Masahiko; Ide, Akihiro*
Journal of Nuclear Science and Technology, 57(4), p.408 - 420, 2020/04
Times Cited Count:1 Percentile:11.41(Nuclear Science & Technology)In a fuel handling system of sodium-cooled fast reactors (SFRs), it is necessary to remove the sodium remaining on spent fuel assemblies (FAs) before storing them in a spent fuel water pool (SFP) in order to minimize plant operating loads. A next-generation SFR in Japan has adopted an advanced dry cleaning process which consists of the following steps, argon gas blowing to remove the metallic residual sodium on the FA, moist argon gas blowing to deactivate the residual sodium, and direct storage in the SFP. This three-step process increases economic competitiveness and reduces waste products thanks to a waterless process. In this R&D work, performance of the dry cleaning process has been investigated.
Kudo, Hideyuki*; Inuzuka, Taisuke*; Hara, Masahide*; Kato, Atsushi; Nagai, Keiichi; Ide, Akihiro*
Journal of Nuclear Science and Technology, 57(1), p.9 - 23, 2020/01
Times Cited Count:1 Percentile:11.41(Nuclear Science & Technology)In sodium-cooled fast reactors (SFRs), it is necessary to remove the sodium remaining on spent fuel assemblies (FAs) before storing them in a spent fuel water pool (SFP) in order to minimize plant operating loads. A next-generation SFR in Japan has adopted an advanced dry cleaning process which consists of the following steps: argon gas blowing to remove the metallic residual sodium on the FA, moist argon gas blowing to deactivate the residual sodium, and direct storage in the SFP. This process increases economic competitiveness and reduces waste products. In this RD work, performance of the dry cleaning process has been investigated. This paper describes experimental and analytical work focusing on the amount of residual sodium remaining on FA components, for instance the handling head, the wrapper tube, the upper shielding, and the entrance nozzle which was conducted after investigation of residual sodium on fuel pin bundles as a part of series study of the cleaning process.
Kudo, Hideyuki*; Otani, Yuichi*; Hara, Masahide*; Kato, Atsushi; Ishikawa, Nobuyuki; Otaka, Masahiko; Nagai, Keiichi; Saito, Junichi; Ara, Kuniaki; Ide, Akihiro*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 10 Pages, 2019/05
A next generation SFR in Japan has adopted an advanced dry cleaning system which consists of the argon gas blowing process to reduce the amount of metallic residual sodium remaining on spent fuel assemblies. This paper describes experimental and analytical work focusing on the amount of residual sodium remaining on a fuel pin bundle before and after the argon gas blowing process. The experiments were conducted using a sodium test loop and a short specimen consisting of a 7 pin bundle. The effects of the blowing gas velocity and the blowing time were quantitatively analyzed in the experiments. On the basis of these experimental results, evaluation models predicting the amount of the residual sodium were constructed.
Ide, Akihiro*; Kudo, Hideyuki*; Inuzuka, Taisuke*; Hara, Masahide*; Kato, Atsushi; Ishikawa, Nobuyuki; Otaka, Masahiko; Nagai, Keiichi; Saito, Junichi; Ara, Kuniaki
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 10 Pages, 2019/05
A next generation SFR in Japan has adopted an advanced dry cleaning system which consists of the following process of argon gas blowing to reduce the amount of metallic sodium, moist argon gas blowing to deactivate the residual sodium, and direct storage in the SFP without using storage containers. This three-step process increases economic competitiveness and reduces waste products. In this Research and Development work, the amount of residual sodium and performance of the dry cleaning process were investigated. This paper describes experimental and analytical work for all parts of a fuel assembly except for a fuel pin bundle.
Asai, Shiho; Hanzawa, Yukiko; Konda, Miki; Suzuki, Daisuke; Magara, Masaaki; Kimura, Takaumi; Ishihara, Ryo*; Saito, Kyoichi*; Yamada, Shinsuke*; Hirota, Hideyuki*
Talanta, 185, p.98 - 105, 2018/08
Times Cited Count:7 Percentile:32.37(Chemistry, Analytical)Estimating the risks associated with radiation from long-lived fission products (LLFP) in radioactive waste is essential to ensure the long-term safety of potential disposal sites. In this study, the amount of Zr, a LLFP, was determined by ICP-MS after separating Zr from a spent nuclear fuel solution using a microvolume anion-exchange cartridge (TEDA cartridge). The TEDA cartridge achieved highly selective separation of Zr regardless of its small bed volume of 0.08 cm. The time taken to complete the Zr separation was 1.2 min with a flow rate of 1.5 mL/min, which was 10 times faster than that for a conventional anion-exchange resin column. Almost all the other elements were removed, leading to accurate measurement of Zr. The result connects experimental value to theoretical prediction provided by ORIGEN2, which requires verification. With the measured value, we demonstrated that the theoretical value is reliable enough to estimate radiation risks.
Shimaoka, Takehiro*; Kaneko, Junichi*; Sato, Yuki; Tsubota, Masakatsu*; Shimmyo, Hiroaki*; Chayahara, Akiyoshi*; Watanabe, Hideyuki*; Umezawa, Hitoshi*; Mokuno, Yoshiaki*
Physica Status Solidi (A), 213(10), p.2629 - 2633, 2016/10
Times Cited Count:7 Percentile:41.46(Materials Science, Multidisciplinary)Asai, Shiho; Hanzawa, Yukiko; Konda, Miki; Suzuki, Daisuke; Magara, Masaaki; Kimura, Takaumi; Ishihara, Ryo*; Saito, Kyoichi*; Yamada, Shinsuke*; Hirota, Hideyuki*
Analytical Chemistry, 88(6), p.3149 - 3155, 2016/03
Times Cited Count:8 Percentile:30.06(Chemistry, Analytical)Neptunium-237 (Np) is one of the major long-lived radionuclides found in spent nuclear fuel. To evaluate the long-term safety of a HLW repository, the Np content in spent nuclear fuel must be determined. In this study, micro-volume anion-exchange porous polymer disk-packed cartridges were prepared for Am-Np separation, which is required prior to the measurement of Np with ICP-MS. Disks with a volume of 0.08 cm were cut out from porous sheets having triethylenediamine (TEDA)-containing polymer chains densely attached on the pore surface. The resulting TEDA-introduced disk cartridge was applied to a spent nuclear fuel sample. The chemical yield of Np was 90.4%, which is sufficiently high for ICP-MS measurement of Np. Compared with the conventional separation technique using commercially available anion-exchange resin columns, the time required to adsorb, wash and elute Np using the TEDA-introduced disk cartridge was reduced by 75%.
Esirkepov, T. Z.; Koga, J. K.; Sunahara, Atsushi*; Morita, Toshimasa; Nishikino, Masaharu; Kageyama, Kei*; Nagatomo, Hideo*; Nishihara, Katsunobu; Sagisaka, Akito; Kotaki, Hideyuki; et al.
Nuclear Instruments and Methods in Physics Research A, 745, p.150 - 163, 2014/05
Times Cited Count:45 Percentile:96.43(Instruments & Instrumentation)Tanaka, Ryota*; Ishihara, Ryo*; Miyoshi, Kazuyoshi*; Umeno, Daisuke*; Saito, Kyoichi*; Asai, Shiho; Yamada, Shinsuke*; Hirota, Hideyuki*
Separation Science and Technology, 49(1), p.154 - 159, 2014/01
Times Cited Count:4 Percentile:16.87(Chemistry, Multidisciplinary)Murakawa, Takeshi*; Hayashi, Hideyuki*; Sunami, Tomoko; Kurihara, Kazuo; Tamada, Taro; Kuroki, Ryota; Suzuki, Mamoru*; Tanizawa, Katsuyuki*; Okajima, Toshihide*
Acta Crystallographica Section D, 69(12), p.2483 - 2494, 2013/12
Times Cited Count:13 Percentile:68.93(Biochemical Research Methods)The crystal structure of a Cu amine oxidase from was determined at 1.08 resolution with the use of low-molecular-weight polyethylene glycol (LMW PEG; average molecular weight 200) as a cryoprotectant. The final crystallographic -factor and value are 13.0% and 15.0%, respectively. Several molecules of LMW PEG were found to occupy cavities in the protein interior including the active site, which resulted in the marked reduction of the overall factor and consequently led to a sub-atomic resolution structure for a relatively large protein with a monomer molecular weight of 70,000. About 40% of all the presumed hydrogen atoms were observed as clear electron densities in the - difference map. Multiple minor conformers were also identified for many residues. Anisotropic displacement fluctuations were evaluated in the active site that contains a post-translationally derived quinone cofactor and a Cu atom. Furthermore, diatomic molecules, most likely molecular oxygen, are bound to the protein, one of which is located in the region that has been previously proposed as an entry route for the substrate dioxygen from the central cavity of the dimer interface to the active site.
Uchiyama, Shoichiro*; Ishihara, Ryo*; Umeno, Daisuke*; Saito, Kyoichi*; Yamada, Shinsuke*; Hirota, Hideyuki*; Asai, Shiho
Journal of Chemical Engineering of Japan, 46(6), p.414 - 419, 2013/06
Times Cited Count:7 Percentile:26.17(Engineering, Chemical)Wada, Go*; Ishihara, Ryo*; Miyoshi, Kazuyoshi*; Umeno, Daisuke*; Saito, Kyoichi*; Asai, Shiho; Yamada, Shinsuke*; Hirota, Hideyuki*
Solvent Extraction and Ion Exchange, 31(2), p.210 - 220, 2013/02
Times Cited Count:2 Percentile:12.3(Chemistry, Multidisciplinary)A crosslinked chelating porous sheet was prepared by cografting ethylene glycol dimethacrylate (EGDMA) with glycidyl methacrylate onto an electron-beam-irradiated porous polyethylene sheet, followed by the introduction of an iminodiacetate group. At a molar percentage of EGDMA of 1.0 mol%, the sheet exhibited a maximum dynamic binding capacity for copper ions of 0.93 mmol/g, while the equilibrium binding capacity remained the same (1.2 mmol/g) as that of a non-crosslinked chelating porous sheet. The crosslinking of the grafted chain causes copper ions to lower their diffusion rate along the sheet thickness driven by the gradient of the amount of copper ions adsorbed.
Kudo, Hideyuki*; Ota, Junki*; Sugiyama, Kenichiro*; Narabayashi, Tadashi*; Ohshima, Hiroyuki; Kurihara, Akikazu
Hozengaku, 11(4), p.90 - 97, 2013/01
When a heat transfer tube wall in a steam generator of a sodium-cooled fast reactor fails, high-pressure steam leaks into low-pressure liquid sodium side. Then the high-temperature and highly corrosive reaction jet causes secondary failures of neighboring heat transfer tubes. The objective of the present study is to develop an experimental method to obtain data that is necessary to validate and improve a safety evaluation code on the sodium-water reaction. In the present paper, a method of sodium-droplet erosion test at the position of the local structure in underexpanded inert-gas impinging jets using the visualization method, which was developed in our previous study, was reported. The erosion phenomena observed in the sodium-droplet entrained region, where intensive erosion is expected, were found to be discussed using the existing knowledge of liquid droplet impingement (LDI) obtained in water experiments.
Kudo, Hideyuki*; Sugiyama, Kenichiro*; Narabayashi, Tadashi*; Ohshima, Hiroyuki; Kurihara, Akikazu
Journal of Nuclear Science and Technology, 50(1), p.72 - 79, 2013/01
Times Cited Count:6 Percentile:44.21(Nuclear Science & Technology)In order to accurately model sodium-water reaction jets in steam generators of fast breeder reactors, knowledge of size distributions or mean diameters of liquid sodium droplets entrained into the reaction jets are prerequisite. In the present study, argon-gas jet behaviors, without chemical reaction, injected into liquid sodium were successfully visualized using an endoscope and a glass tube, and the size distributions and mean diameters of liquid sodium droplets entrained into the gas jet were also obtained in the bubbling regime.
Kudo, Hideyuki*; Zhao, D.*; Sugiyama, Kenichiro*; Narabayashi, Tadashi*; Ohshima, Hiroyuki; Kurihara, Akikazu
Journal of Nuclear Science and Technology, 49(12), p.1175 - 1185, 2012/12
Times Cited Count:3 Percentile:25.07(Nuclear Science & Technology)Little work on the void fraction behaviors along structural materials with poor-wettability for liquid metals has been performed. In the present study, void fraction behaviors around a single cylinder with non-wetting surface condition were quantitatively discussed by using a gas jet-cylinder system where the impinging jet flow, the boundary layer flow, the separation flow, and the wake flow appear. The characteristics in each flow field as well as the relationship between flow fields, which have not been quantitatively discussed so far, are obtained. The local void fraction around a single cylinder with wetting condition or non-wetting condition was measured by using resistivity probes.
Iwasa, Kazuaki*; Hao, L.*; Kogi, Masafumi*; Kuwahara, Keitaro*; Mignot, J.-M.*; Sugawara, Hitoshi*; Aoki, Yuji*; Matsuda, Tatsuma; Sato, Hideyuki*
Journal of the Physical Society of Japan, 81(9), p.094711_1 - 094711_9, 2012/09
Times Cited Count:9 Percentile:52.99(Physics, Multidisciplinary)