Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kokubun, Yuji; Hosomi, Kenji; Nagaoka, Mika; Seya, Natsumi; Inoue, Kazumi; Koike, Yuko; Uchiyama, Rei; Sasaki, Kazuki; Maehara, Yushi; Matsuo, Kazuki; et al.
JAEA-Review 2024-054, 168 Pages, 2025/03
The Nuclear Fuel Cycle Engineering Laboratories conducts environmental radiation monitoring around the reprocessing plant in accordance with the "Safety Regulations for Reprocessing Plant of JAEA, Part IV: Environmental Monitoring". This report summarizes the results of environmental radiation monitoring conducted during the period from April 2023 to March 2024 and the results of dose calculations for the surrounding public due to the release of radioactive materials from the plant into the atmosphere and ocean. In the results of the above environmental radiation monitoring, several items were affected by radioactive materials emitted from the accident at the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Company, Incorporated (changed to Tokyo Electric Power Holdings, Inc. on April 1, 2016), which occurred in March 2011. In addition, environmental monitoring plan, analysis and measurement methods, monitoring data and their chronological change, meteorological data after statistical processing, status of radioactive waste release and evaluation results of the data over the normal range are included as appendices.
Hirouchi, Jun; Watanabe, Masatoshi*; Hayashi, Naho; Nagakubo, Azusa; Takahara, Shogo
JAEA-Research 2024-015, 114 Pages, 2025/03
The public living in areas contaminated by nuclear accidents is exposed to radiation in the early phase and over the long term. Even under the same accident scenario, the exposure doses and the effectiveness of sheltering, which is one of the protective measures, vary depending on the meteorological condition and the surrounding environment. The exposure doses and sheltering effectiveness in the early phase are important information for the public and the national and local governments planning a nuclear emergency preparedness. In this report, we evaluate the exposure doses and sheltering effectiveness at sites with nuclear facilities in Japan using OSCAAR, one of the probabilistic risk assessment codes, for five accident scenarios: three scenarios from past severe accident studies; a scenario defined by the Nuclear Regulatory Authority; and a scenario assuming the Fukushima Daiichi Nuclear Power Station accident. The sheltering effectiveness differed by approximately 20% among the sites. This was due to the differences in wind speed among the sites.
Hirouchi, Jun; Watanabe, Masatoshi*; Hayashi, Naho; Nagakubo, Azusa; Takahara, Shogo
Journal of Radiological Protection, 45(1), p.011506_1 - 011506_11, 2025/03
Times Cited Count:0Public living in areas contaminated by nuclear accidents is exposed to radiation in the early phase and over the long term. Even under similar accident scenarios, radiation doses and sheltering effectiveness, which is one of the protective measures, depend on meteorological conditions and the surrounding environment. Radiation doses and sheltering effectiveness in the early phase of nuclear accidents are crucial information for the public as well as national and local governments planning a nuclear emergency preparedness. In this study, we assessed radiation doses and sheltering effectiveness at sites with nuclear facilities in Japan using the Off-Site Consequence Analysis code for Atmospheric Release accidents, which is one of the level-3 probabilistic risk assessment codes, for five accident scenarios: three scenarios from past severe accident studies, a scenario defined by the Nuclear Regulation Authority in Japan, and a scenario corresponding to the Fukushima-Daiichi Nuclear Power Station accident. The sheltering effectiveness differed by up to approximately 50% among the accident scenarios at the same sites and by approximately 20%50% among sites under the same accident scenario. Differences in the radionuclide composition among the accident scenarios and the differences in wind speeds among the sites primarily caused these differences in sheltering effectiveness.
Nakamura, Satoshi; Ishii, Sho*; Kato, Hitoshi*; Ban, Yasutoshi; Hiruta, Kenta; Yoshida, Takuya; Uehara, Hiroyuki; Obata, Hiroki; Kimura, Yasuhiko; Takano, Masahide
Journal of Nuclear Science and Technology, 62(1), p.56 - 64, 2025/01
Times Cited Count:1 Percentile:68.64(Nuclear Science & Technology)A dissolution method for analyzing the elemental composition of fuel debris using the sodium peroxide (NaO
) fusion technique has been developed. Herein, two different types of simulated debris materials (such as solid solution of (Zr,RE)O
and molten core-concrete interaction products (MCCI)) were taken. At various temperatures, these debris materials were subsequently fused with Na
O
in crucibles, which are made of different materials, such as Ni, Al
O
, Fe, and Zr. Then, the fused samples are dissolved in nitric acid. Furthermore, the effects of the experimental conditions on the elemental composition analysis were evaluated using inductively coupled plasma-atomic emission spectroscopy (ICP-AES), which suggested the use of a Ni crucible at 923 K as an optimum testing condition. The optimum testing condition was then applied to the demonstration tests with Three Mile Island unit-2 (TMI-2) debris in a shielded concrete cell, thereby achieving complete dissolution of the debris. The elemental composition of TMI-2 debris revealed by the proposed dissolution method has good reproducibility and has an insignificant contradiction in the mass balance of the sample. Therefore, this newly developed reproducible dissolution method can be effectively utilized in practical applications by dissolving fuel debris and estimating its elemental composition.
Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Ishihara, Takanori; Hakoiwa, Hiroaki; Asamori, Koichi; Murakami, Osamu; Fukuda, Shoma; Ogita, Yasuhiro; Kagami, Saya; et al.
JAEA-Research 2024-013, 65 Pages, 2024/11
This annual report documents the progress of research and development (R&D) in the 2nd fiscal year of the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028) to provide the scientific base for assessing geosphere stability for long-term isolation of high-level radioactive waste. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. The current status of R&D activities with previous scientific and technological progress is summarized.
Koda, Yuya; Nakamura, Yasuyuki; Iguchi, Yukihiro*; Yanagihara, Satoshi*
Proceedings of 31st International Conference on Nuclear Engineering (ICONE31) (Internet), 10 Pages, 2024/11
"Fugen" has been proceeding with decommissioning work since receiving approval for the decommissioning plan in 2008, and is currently in the second step of dismantling the reactor peripheral equipment. In decommissioning, project management is important to select strategies and optimize processes, waste, safety, costs, etc. In Japan, it is expected that decommissioning work for nuclear facilities will become more serious in the future, and the knowledge and project management data obtained from the decommissioning work carried out at "Fugen" to date will be useful for planning. Since the dismantling and removal of the main turbine equipment and the peripheral equipment in preparation for the reactors have been completed so far, the actual data has been organized and analyzed and compiled into unit work coefficients. The project management data, collected during the decommissioning work carried out at "Fugen" is organized and calculated as a unit work coefficient.
Toyama, Takeshi*; Tanno, Takashi; Yano, Yasuhide; Inoue, Koji*; Nagai, Yasuyoshi*; Otsuka, Satoshi; Miyazawa, Takeshi; Mitsuhara, Masatoshi*; Nakashima, Hideharu*; Onuma, Masato*; et al.
Journal of Nuclear Materials, 599, p.155252_1 - 155252_14, 2024/10
Times Cited Count:0 Percentile:0.00(Materials Science, Multidisciplinary)We investigated the stability of oxide nano particles in oxide dispersion-strengthened (ODS) steel, which is a promising candidate material for next-generation reactors, under neutron irradiation at high temperature to high doses. MA957, a 14Cr-ODS steel, was irradiated with Joyo in Japan Atomic Energy Agency under irradiation conditions of 130 dpa at 502C, 154 dpa at 589
C, and 158 dpa at 709
C. Three-dimensional atom probe (3D-AP) and transmission electron microscope (TEM) observation were performed to characterize the oxide particles in the ODS steels. A high number density of Y-Ti-O particle was observed in the unirradiated and irradiated samples. Almost no change in the morphology of the oxide particles, i.e. average diameter, number density, and chemical composition, has been observed in the samples irradiated to 130 dpa at 502
C and to 154 dpa at 589
C. A slight decrease in number density was observed in the sample irradiated to 158 dpa at 709
CC. The hardness of any of the irradiated samples was almost unchanged from that of the unirradiated sample. It was revealed that the oxide particles existed stable, and the strength of the material was sufficiently maintained even after being neutron irradiated to high dose of
160 dpa at high temperature up to 700
C. A part of this study includes the results of MEXT Innovative Nuclear Research and Development Program Grant Number JPMXD0219214482.
Zhang, Y.-J.*; Umeda, Takemasa*; Morooka, Satoshi; Harjo, S.; Miyamoto, Goro*; Furuhara, Tadashi*
Metallurgical and Materials Transactions A, 55(10), p.3921 - 3936, 2024/10
Times Cited Count:0 Percentile:0.00(Materials Science, Multidisciplinary)Niwa, Masakazu; Shimada, Akiomi; Asamori, Koichi; Sueoka, Shigeru; Komatsu, Tetsuya; Nakajima, Toru; Ogata, Manabu; Uchida, Mao; Nishiyama, Nariaki; Tanaka, Kiriha; et al.
JAEA-Review 2024-035, 29 Pages, 2024/09
This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2024. The objectives and contents of this research are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques.
Watanabe, Miku*; Miyamoto, Goro*; Zhang, Y.*; Morooka, Satoshi; Harjo, S.; Kobayashi, Yasuhiro*; Furuhara, Tadashi*
ISIJ International, 64(9), p.1464 - 1476, 2024/07
Times Cited Count:2 Percentile:54.79(Metallurgy & Metallurgical Engineering)Li, L.*; Miyamoto, Goro*; Zhang, Y.*; Li, M.*; Morooka, Satoshi; Oikawa, Katsunari*; Tomota, Yo*; Furuhara, Tadashi*
Journal of Materials Science & Technology, 184, p.221 - 234, 2024/06
Times Cited Count:3 Percentile:41.38(Materials Science, Multidisciplinary)Imagawa, Yuya; Hashidate, Ryuta; Miyazawa, Takeshi; Onizawa, Takashi; Otsuka, Satoshi; Yano, Yasuhide; Tanno, Takashi; Kaito, Takeji; Onuma, Masato*; Mitsuhara, Masatoshi*; et al.
Journal of Nuclear Science and Technology, 61(6), p.762 - 777, 2024/06
Times Cited Count:3 Percentile:51.90(Nuclear Science & Technology)The Japan Atomic Energy Agency has been developing 9Cr-oxide dispersion strengthened (ODS) steel as a fuel cladding material for sodium-cooled fast reactors (SFRs). Previous studies have formulated the creep rupture equation for 650C to 850
C. However, little data have been obtained above 850
C, and no equation has been formulated. This study conducted creep tests to evaluate creep strength at 700
C to 1000
C. Two creep test methods, the internal pressure and ring creep tests under development, were used, and the validation of the ring creep test method was conducted. The results showed that 9Cr-ODS steel undergoes almost no strength change due to the matrix's phase transformation, and a single equation can express a creep rupture strength from 700
C to 1000
C. In validating the ring creep test method, analysis clarified the effect of stress concentration on the specimen. Plastic deformation occurs at high initial stress and may lead to early rupture. The results will be essential for future creep testing and evaluation of neutron-irradiated 9Cr-ODS steel.
Miyazaki, Kanako*; Takehara, Masato*; Minomo, Kenta*; Horie, Kenji*; Takehara, Mami*; Yamasaki, Shinya*; Saito, Takumi*; Onuki, Toshihiko*; Takano, Masahide; Shiotsu, Hiroyuki; et al.
Journal of Hazardous Materials, 470(15), p.134104_1 - 134104_11, 2024/05
Times Cited Count:0 Percentile:0.00(Engineering, Environmental)Miyazawa, Takeshi; Tanno, Takashi; Imagawa, Yuya; Hashidate, Ryuta; Yano, Yasuhide; Kaito, Takeji; Otsuka, Satoshi; Mitsuhara, Masatoshi*; Toyama, Takeshi*; Onuma, Masato*; et al.
Journal of Nuclear Materials, 593, p.155008_1 - 155008_16, 2024/05
Times Cited Count:0 Percentile:0.00(Materials Science, Multidisciplinary)Kokubun, Yuji; Nakada, Akira; Seya, Natsumi; Koike, Yuko; Nemoto, Masashi; Tobita, Keiji; Yamada, Ryohei*; Uchiyama, Rei; Yamashita, Daichi; Nagai, Shinji; et al.
JAEA-Review 2023-046, 164 Pages, 2024/03
The Nuclear Fuel Cycle Engineering Laboratories conducts environmental radiation monitoring around the reprocessing plant in accordance with the "Safety Regulations for Reprocessing Plant of JAEA, Part IV: Environmental Monitoring". This report summarizes the results of environmental radiation monitoring conducted during the period from April 2022 to March 2023 and the results of dose calculations for the surrounding public due to the release of radioactive materials into the atmosphere and ocean. In the results of the above environmental radiation monitoring, many items were affected by radioactive materials emitted from the accident at the Fukushima Daiichi Nuclear Power Plant of Tokyo Electric Power Company, Incorporated (changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016), which occurred in March 2011. Also included as appendices are an overview of the environmental monitoring plan, an overview of measurement methods, measurement results and their changes over time, meteorological statistics results, radioactive waste release status, and an evaluation of the data which deviated of the normal range.
Zhang, Y.*; Marusawa, Kenji*; Kudo, Kohei*; Morooka, Satoshi; Harjo, S.; Miyamoto, Goro*; Furuhara, Tadashi*
ISIJ International, 64(2), p.245 - 256, 2024/01
Times Cited Count:2 Percentile:73.35(Metallurgy & Metallurgical Engineering)Chong, Y.*; Gholizadeh, R.*; Guo, B.*; Tsuru, Tomohito; Zhao, G.*; Yoshida, Shuhei*; Mitsuhara, Masatoshi*; Godfrey, A.*; Tsuji, Nobuhiro*
Acta Materialia, 257, p.119165_1 - 119165_14, 2023/09
Times Cited Count:29 Percentile:97.53(Materials Science, Multidisciplinary)Metastable titanium alloys possess excellent strain-hardening capability, but suffer from a low yield strength. As a result, numerous attempts have been made to strengthen this important structural material in the last decade. Here, we explore the contributions of grain refinement and interstitial additions in raising the yield strength of a Ti-12Mo (wt.%) metastable
titanium alloy. Surprisingly, rather than strengthening the material, grain refinement actually lowers the ultimate tensile strength in this alloy. This unexpected and anomalous behavior is attributed to a significant enhancement in strain-induced
martensite phase transformation, where in-situ synchrotron X-ray diffraction analysis reveals, for the first time, that this phase is much softer than the parent
phase. Instead, a combination of both oxygen addition and grain refinement is found to realize an unprecedented strength-ductility synergy in a Ti-12Mo-0.3O (wt.%) alloy. The advantageous effect of oxygen solutes in this ternary alloy is twofold. Firstly, solute oxygen largely suppresses strain-induced transformation to the
martensite phase, even in a fine-grained microstructure, thus avoiding the softening effect of excessive amounts of
martensite. Secondly, oxygen solutes readily segregate to twin boundaries, as revealed by atom probe tomography. This restricts the growth of
deformation twins, thereby promoting more extensive twin nucleation, leading to enhanced microstructural refinement. The insights from our work provide a cost-effective rationale for the design of strong yet tough metastable
titanium alloys, with significant implications for more widespread use of this high strength-to-weight structural material.
Yoshimune, Wataru*; Higuchi, Yuki*; Kato, Akihiko*; Hibi, Shogo*; Yamaguchi, Satoshi*; Matsumoto, Yoshihiro*; Hayashida, Hirotoshi*; Nozaki, Hiroshi*; Shinohara, Takenao; Kato, Satoru*
ACS Energy Letters (Internet), 8(8), p.3485 - 3487, 2023/08
Times Cited Count:13 Percentile:83.08(Chemistry, Physical)Fueda, Kazuki*; Komiya, Tatsuki*; Minomo, Kenta*; Horie, Kenji*; Takehara, Mami*; Yamasaki, Shinya*; Shiotsu, Hiroyuki; Onuki, Toshihiko*; Grambow, B.*; Law, G. T. W.*; et al.
Chemosphere, 328, p.138566_1 - 138566_12, 2023/07
Times Cited Count:5 Percentile:58.49(Environmental Sciences)Nakada, Akira; Kanai, Katsuta; Seya, Natsumi; Nishimura, Shusaku; Futagawa, Kazuo; Nemoto, Masashi; Tobita, Keiji; Yamada, Ryohei*; Uchiyama, Rei; Yamashita, Daichi; et al.
JAEA-Review 2022-078, 164 Pages, 2023/03
Environmental radiation monitoring around the Tokai Reprocessing Plant has been performed by the Nuclear Fuel Cycle Engineering Laboratories, based on "Safety Regulations for the Reprocessing Plant of Japan Atomic Energy Agency, Chapter IV - Environmental Monitoring". This annual report presents the results of the environmental monitoring and the dose estimation to the hypothetical inhabitant due to the radioactivity discharged from the plant to the atmosphere and the sea during April 2021 to March 2022. In this report, some data include the influence of the accidental release from the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc. (the trade name was changed to Tokyo Electric Power Company Holdings, Inc. on April 1, 2016) in March 2011. Appendices present comprehensive information, such as monitoring programs, monitoring methods, monitoring results and their trends, meteorological data and discharged radioactive wastes. In addition, the data which were influenced by the accidental release and exceeded the normal range of fluctuation in the monitoring, were evaluated.