Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Oks, E.*; Dalimier, E.*; Faenov, A.*; Pikuz, T.*; Fukuda, Yuji; Andreev, A.*; Koga, J. K.; Sakaki, Hironao; Kotaki, Hideyuki; Pirozhkov, A. S.; et al.
Optics Express (Internet), 23(25), p.31991 - 32005, 2015/12
Times Cited Count：7 Percentile：38.69(Optics)We present experiments dealing with a femtosecond laser-driven cluster-based plasma, where by analyzing the nonlinear phenomenon of satellites of spectral lines of Ar XVII, we revealed the nonlinear phenomenon of the generation of the second harmonic of the laser frequency. For performing this analysis we developed new results in the theory of satellites of spectral lines. From such lineshape analysis we found, in particular, that the efficiency of converting the short (40 fs) intense (3
10
W/cm
) incident laser light into the second harmonic was 2%. This result is in the excellent agreement with the 2-Dimensional Particle-In-Cell (2D PIC) simulation that we also performed. There is also an order of magnitude agreement between the thresholds for the SHG found from the line shape analysis and from the 2D PIC simulations.
Pirozhkov, A. S.; Kando, Masaki; Esirkepov, T. Z.; Faenov, A. Y.*; Pikuz, T. A.*; Kawachi, Tetsuya; Sagisaka, Akito; Koga, J. K.; Mori, Michiaki; Kawase, Keigo*; et al.
RAL-TR-2015-025, P. 22, 2015/00
Pirozhkov, A. S.; Kando, Masaki; Esirkepov, T. Z.; Gallegos, P.*; Ahmed, H.*; Ragozin, E. N.*; Faenov, A. Ya.*; Pikuz, T. A.*; Kawachi, Tetsuya; Sagisaka, Akito; et al.
New Journal of Physics (Internet), 16(9), p.093003_1 - 093003_30, 2014/09
Times Cited Count：30 Percentile：80.96(Physics, Multidisciplinary)
measurements of neutron-rich nuclei far from the 
-stability lineHayashi, Hiroaki*; Shibata, Michihiro*; Asai, Masato; Osa, Akihiko; Sato, Tetsuya; Koizumi, Mitsuo; Kimura, Atsushi; Oshima, Masumi*
Nuclear Instruments and Methods in Physics Research A, 747, p.41 - 51, 2014/05
Times Cited Count：10 Percentile：60.73(Instruments & Instrumentation)To measure -decay energy of short-lived fission products with good accuracy and high efficiency, we have developed a new total absorption clover detector and demonstrated its performance. Using a large-volume clover-type Ge detector having a through-hole in its center, we could measure total absorption spectra of + 
rays with extremely high efficiency and high energy resolution, and could determine values with 
30 keV accuracy. Using this detector, we have determined the values of 
Eu and 
Gd for the first time, and of 
Eu and 
Gd with better accuracies. In addition, we have observed a new isomeric state in Gd, and determined its half-life and excitation energy.
Pirozhkov, A. S.; Kando, Masaki; Esirkepov, T. Z.; Gallegos, P.*; Ahmed, H.*; Ragozin, E. N.*; Faenov, A. Ya.*; Pikuz, T.; Kawachi, Tetsuya; Sagisaka, Akito; et al.
AIP Conference Proceedings 1465, p.167 - 171, 2012/07
Times Cited Count：1 Percentile：46.41(Physics, Applied)Esirkepov, T. Z.; Pirozhkov, A. S.; Kando, Masaki; Gallegos, P.*; Ahmed, H.*; Ragozin, E. N.*; Faenov, A.*; Pikuz, T.; Kawachi, Tetsuya; Sagisaka, Akito; et al.
AIP Conference Proceedings 1465, p.172 - 180, 2012/07
Times Cited Count：0 Percentile：0.13(Physics, Applied)The bow wave induced mechanism of high-order harmonics generation was discovered using simulations and catastrophe theory. This mechanism feasibility was successfully demonstrated in 3D and 2D PIC simulations. The mechanism and the simulations explained high-order harmonics in the XUV spectral region seen in recent experiments with terawatt lasers. Development of new XUV light and X-ray source based on the high-order harmonics generation mechanism is proposed.
Kando, Masaki; Pirozhkov, A. S.; Nakamura, Tatsufumi; Hayashi, Yukio; Kotaki, Hideyuki; Kawase, Keigo*; Esirkepov, T. Z.; Fukuda, Yuji; Kiriyama, Hiromitsu; Okada, Hajime; et al.
AIP Conference Proceedings 1465, p.159 - 166, 2012/07
Times Cited Count：0 Percentile：0.13(Physics, Applied)Pirozhkov, A. S.; Kando, Masaki; Esirkepov, T. Z.; Gallegos, P.*; Ahmed, H.*; Ragozin, E. N.*; Faenov, A. Ya.*; Pikuz, T.; Kawachi, Tetsuya; Sagisaka, Akito; et al.
Physical Review Letters, 108(13), p.135004_1 - 135004_5, 2012/03
Times Cited Count：69 Percentile：90.68(Physics, Multidisciplinary)We demonstrate a new high-order harmonic generation mechanism reaching the "water window" spectral region in experiments with multi-terawatt femtosecond lasers irradiating gas jets. A few hundred harmonic orders are resolved, giving 
J/sr pulses. Harmonics are collectively emitted by an oscillating electron spike formed at the joint of the boundaries of a cavity and bow wave created by a relativistically self-focusing laser in underdense plasma. The spike sharpness and stability are explained by catastrophe theory. The mechanism is corroborated by particle-in-cell simulations.
Iwamatsu, Shigemi; Kanazawa, Yoshiharu; Hayashi, Koji; Sozawa, Shizuo; Nakagawa, Tetsuya
JAEA-Testing 2009-006, 17 Pages, 2010/03
JAEA-Testing-2009-006.pdf:6.0MB
This report is concerned with replacement of the power manipulator in the No.2 concrete cell of JMTR Hot Laboratory in the 2008 fiscal year. It was carried out the replacement of power manipulator mainly on a chassis part including the remarkably aged wrist, shoulder and controller. The specifications of the machinery to be replaced, the installation and the acceptance inspection were described.
Sozawa, Shizuo; Nakagawa, Tetsuya; Iwamatsu, Shigemi; Hayashi, Koji; Tayama, Yoshinobu; Kawamata, Kazuo; Yonekawa, Minoru; Taguchi, Taketoshi; Kanazawa, Yoshiharu; Omi, Masao
JAEA-Technology 2009-070, 27 Pages, 2010/03
JAEA-Technology-2009-070.pdf:7.46MB
Refurbishment of the Japan Materials Testing Reactor (JMTR), which is recognized as one of important facilities in Japan for safety research, is in progress by the JAEA. In Extensive safety research of light-water reactor (LWR) fuels and materials under a contract with the Nuclear and Industrial Safety Agency of Ministry of Economy, Trade and Industry of Japan, the irradiation tests are planned in order to examine integrity of the LWR fuels and structure materials. For the irradiation tests of high burnup fuels and irradiated materials in the JMTR, modification of the hot laboratory facilities are needed, which are (1) making of application books for strengthening JMTR hot-lab. cell-shielding, (2) the capsule assembling device of detailed design, (3) safety analysis for domestic transportation cask and (4) confirmatory testing of diamond drill of fuel-rod center-hole processing device.
Sozawa, Shizuo; Nakagawa, Tetsuya; Omi, Masao; Hayashi, Koji; Iwamatsu, Shigemi; Kawamata, Kazuo; Kato, Yoshiaki; Kanazawa, Yoshiharu
JAEA-Technology 2009-069, 32 Pages, 2010/03
JAEA-Technology-2009-069.pdf:7.33MB
Refurbishment of the Japan Materials Testing Reactor (JMTR), which is recognized as one of important facilities in Japan for safety research, is in progress by the JAEA. In Extensive safety research of light-water reactor (LWR) fuels and materials under a contract with the Nuclear and Industrial Safety Agency of Ministry of Economy, Trade and Industry of Japan, the irradiation tests are planned in order to examine integrity of the LWR fuels and structure materials. For the irradiation tests of high burnup fuels and irradiated materials in the JMTR, modification of the hot laboratory facilities are needed, which are (1) strengthening JMTR hot-lab. cell-shielding, (2) the capsule assembling device, (3) domestic transportation cask, (4) fuel-rod center-hole processing device, (5) master-slave manipulators, (6) power manipulator, and (7) scanning electron microscope.
Kando, Masaki; Pirozhkov, A. S.; Kawase, Keigo; Esirkepov, T. Z.; Fukuda, Yuji; Kiriyama, Hiromitsu; Okada, Hajime; Daito, Izuru; Kameshima, Takashi; Hayashi, Yukio; et al.
Physical Review Letters, 103(23), p.235003_1 - 235003_4, 2009/12
Times Cited Count：100 Percentile：93.67(Physics, Multidisciplinary)Kando, Masaki; Pirozhkov, A. S.; Fukuda, Yuji; Esirkepov, T. Z.; Daito, Izuru; Kawase, Keigo; Ma, J. L.*; Chen, L. M.*; Hayashi, Yukio; Mori, Michiaki; et al.
European Physical Journal D, 55(2), p.465 - 474, 2009/09
Times Cited Count：18 Percentile：63.89(Optics)Nonlinear interaction of intense laser beams with plasma causes a number of different regimes of generation of high energy particle beams and of strong radiation with the emitted photon energy from the X-ray to THz frequency range. The review of the first proof-of-principle experiment and the latest progress on the flying mirror is presented. A low frequency EM radiation emission has also been observed in our experiments. The interpretation invokes the relativistic electromagnetic solitons. The solitons are formed in an underdense plasma in the process of the laser pulse frequency downshift. They store a portion of EM wave energy with the polarization inherited from the laser and emit it at the plasma-vacuum interface in a form of the low frequency EM bursts. We present the results of the polarization-resolved measurements.
Pirozhkov, A. S.; Kando, Masaki; Esirkepov, T. Z.; Fukuda, Yuji; Chen, L.-M.*; Daito, Izuru; Ogura, Koichi; Homma, Takayuki; Hayashi, Yukio; Kotaki, Hideyuki; et al.
AIP Conference Proceedings 1153, p.274 - 284, 2009/07
Iwatsuki, Teruki; Sato, Haruo; Tanai, Kenji; Inagaki, Manabu; Sawada, Atsushi; Niinuma, Hiroaki; Ishii, Eiichi; Maekawa, Keisuke; Tomura, Goji; Sanada, Hiroyuki; et al.
JAEA-Research 2009-002, 156 Pages, 2009/05
JAEA-Research-2009-002.pdf:12.86MB
The research and development plan for geological investigation, engineering technology and safety assessment during the drilling of a shaft down to intermediate depth are summarized according to the Midterm Plan till 2009 Fiscal year of JAEA. This report describes subject, current status and programme in the "Phase 2: Construction phase" (investigations during construction of the underground facilities). Furthermore regarding R&D plan in next Midterm Plan of JAEA, preliminary ideas are summarized.
Kando, Masaki; Pirozhkov, A. S.; Fukuda, Yuji; Esirkepov, T. Z.; Daito, Izuru; Kawase, Keigo; Ma, J.-L.; Chen, L.-M.; Hayashi, Yukio; Mori, Michiaki; et al.
Harnessing Relativistic Plasma Waves as Novel Radiation Sources from Terahertz to X-Rays and Beyond (Proceedings of SPIE Vol.7359), p.73590K_1 - 73590K_11, 2009/05
Times Cited Count：0 Percentile：0.07(Optics)Hayashi, Kimio; Nakagawa, Tetsuya; Onose, Shoji; Ishida, Takuya; Nakamichi, Masaru; Takatsu, Hideyuki; Nakamura, Mutsumi*; Noguchi, Tsuneyuki*
Journal of Nuclear Materials, 386-388, p.1083 - 1086, 2009/04
Times Cited Count：0 Percentile：0.01(Materials Science, Multidisciplinary)no abstracts in English
Hayashi, Kimio; Nakagawa, Tetsuya; Onose, Shoji; Ishida, Takuya; Nakamichi, Masaru; Katsuyama, Kozo; Iwamatsu, Shigemi; Hasegawa, Teiji; Kodaka, Hideo; Takatsu, Hideyuki; et al.
JAEA-Technology 2009-007, 168 Pages, 2009/03
JAEA-Technology-2009-007.pdf:31.88MB
In-pile functional tests of breeding blankets have been planned by Japan Atomic Energy Agency (JAEA), using a test blanket module (TBM) which will be loaded in the International Thermonuclear Experimental Reactor (ITER). In preparation for the in-pile functional tests, JAEA has been being performed irradiation experiments of lithium titanate (Li
TiO
), which is the first candidate of solid breeder materials for the blanket of the demonstration reactor (DEMO) under designing in Japan. The present report describes (1) results of a detailed design and trial fabrication tests of a dismantling apparatus for irradiation capsules which were used in irradiation experiments by the Japan Materials Testing Reactor (JMTR) of JAEA, and (2) results of a preliminary investigation of a glove box facility for post-irradiation examinations (PIEs). In the detailed design of the dismantling apparatus, datailed specifications and the installation methods were examined, based on results of a conceptual design and basic design. In the trial fabrication, cutting tests were curried out by making a mockup of a cutting component. Furthermore, a preliminary investigation of a glove box facility was carried out in order to secure a facility for PIE work after the capsule dismantling, which revealed a technical feasibility.
Kawamata, Kazuo; Nakagawa, Tetsuya; Omi, Masao; Hayashi, Koji; Shibata, Akira; Saito, Junichi; Niimi, Motoji
JAEA-Conf 2008-011, p.78 - 86, 2009/01
The JMTR-HL was founded to examine the objects mainly irradiated in the JMTR in 1971. The JMTR-HL has an advantage that the hot cell is connected with the reactor vessel of the JMTR by a canal. Hence it is easy to transport irradiated radioactive capsules and specimens through the canal. Since 1971, about 2,400 irradiated capsules have been treated in the JMTR-HL and various PIEs have been widely performed there. In recent years, several new techniques, e.g., an in-cell IASCC test, a scanning-electron microscope (SEM) / electron-back scattering-diffraction pattern (EBSD) observation, were added to the conventional PIEs. In addition, the JMTR-HL had contributed to realize an in-pile IASCC test program at the JMTR through the development of a TIG welding technique by remote-handling with manipulators in the hot cell for re-assembling of capsules. A modification of the facility to treat high burn-up fuels, up to about 100 GWD/t, is planned at the JMTR-HL now.
Shibata, Akira; Nakano, Junichi; Omi, Masao; Kawamata, Kazuo; Saito, Takashi; Hayashi, Koji; Saito, Junichi; Nakagawa, Tetsuya; Tsukada, Takashi
Proceedings of 16th International Conference on Nuclear Engineering (ICONE-16) (CD-ROM), 8 Pages, 2008/05
Irradiation assisted stress corrosion cracking (IASCC) is considered to be one of the key issues in the aged Light Water Reactors. To simulate IASCC behavior by the in-pile or post-irradiation experiment, it is necessary to irradiate specimens up to a neutron fluence that is higher than the so-called IASCC threshold fluence. There are, however, some technical hurdles to be overcome for the experiments. The techniques assembling pre-irradiated specimens into a in-pile test capsule in a hot cell and the eveluation of material integrity of the capsule during a long term irradiation are necessary. To evaluate material integrity on capsules during a long term irradiation, tensile test and SSRT using specimens which was previously irradiated to 1.0
3.910
n/m
were performed. In this paper, technical developments required for IASCC test, e.g. the development of assembling techniques for IASCC capsules and the evaluation of stainless steels which dosed high-fluence neutron were described.
