Evaluation of Tube Rupture Simulation Test (TRUST-1) for FBR steam generators

Hayashida. Y; Hamada, Hirotsugu

PNC TN9410 97-002, 38 Pages, 1996/06

PNC-TN9410-97-002.pdf:0.87MB

The intermediate water leak in an FBR Steam Generator (SG) causes a high temperature and corrosive sodium-water reaction jet. In such cases, it is necessary to evaluate the wastage and overheating rupture behavior of heat transfer tubes. Especially, in the large SG that aims at high temperature of sodium and high temperature/pressure of water, the establishment of the rational evaluation method is important. In this paper, as a basic experiment to make clear the phenomenon of overheating rupture, tests and analysis of Tube Rupture Simulation Test-1 (TRUST-1) were conducted. TRUST-1 simulates the overheating rupture of the tube made of Mod.9Cr-1Mo steel by nitrogen gaspressurization and quick induction heating. The result of TRUST-1 are as follows: (1)The breaking strength predicted by the internal pressure is larger than the tensile strength of the tube material. (2)The margin of the breaking strength from the tensile strength of the tube material has a tendency of decreasing with the heating rate, especially in the lower temperature region. (3)Using an theoretical formula that is deduced from the steady creep model and appropriate experimental coefficients that are determined by the test data, the breaking strength can be reasonably evaluated.