Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Higa, Ryota*; Fujihara, Hiro*; Toda, Hiroyuki*; Kobayashi, Masakazu*; Ebihara, Kenichi; Takeuchi, Akihisa*
Materials Transactions, 65(8), p.899 - 906, 2024/08
Times Cited Count：3 Percentile：20.18(Materials Science, Multidisciplinary)It is indispensable to suppress hydrogen embrittlement (HE) to develop the strength of the Al-Zn-Mg alloy. Because intergranular fracture (IGF) is mainly observed when HE occurs in the alloy, we need to understand the IGF initiation to suppress HE. In the present study, we investigated the stress, strain, and H concentration, which influence the IGF initiation, in actual fractured regions by simulation of a crystal plasticity finite element method and H diffusion analysis in a 3D image-based model, which was created based on 3D polycrystalline microstructure data obtained from X-ray imaging technique. Combining the simulation and in-situ observation of the tensile test sample by X-ray CT, we examined the stress, strain, and H concentration, and discussed the IG crack initiation condition. As a result, it is revealed that stress normal to grain boundary induced by crystal plasticity dominates IG crack initiation while the accumulation of H due to stress has little impact on it.
Higa, Ryota*; Fujihara, Hiro*; Toda, Hiroyuki*; Kobayashi, Masakazu*; Ebihara, Kenichi; Takeuchi, Akihisa*
Keikinzoku, 73(11), p.530 - 536, 2023/11
In Al-Zn-Mg alloys, suppression of hydrogen embrittlement is necessary to improve their strength. In this study, the distribution of stress, strain, and hydrogen concentration in the actual fracture region was investigated using the crystal plasticity finite element method and hydrogen diffusion analysis based on a model derived from three-dimensional polycrystalline microstructural data obtained by X-ray CT. In addition, the distributions of stress, strain, and hydrogen concentration were compared with the actual crack initiation behavior by combining in-situ observation of tensile tests using X-ray CT and simulation. The results show that stress loading perpendicular to the grain boundary due to crystal plasticity dominates grain boundary crack initiation. It was also found that internal hydrogen accumulation due to crystal plasticity has little effect on crack initiation.
Honda, Ryotaro*; Miwa, Koji*; Matsumoto, Yuki*; Chiga, Nobuyuki*; Hasegawa, Shoichi; Imai, Kenichi
Nuclear Instruments and Methods in Physics Research A, 787, p.157 - 160, 2015/07
Times Cited Count：7 Percentile：44.80(Instruments & Instrumentation)A beam position fiber counter consisting of the scintillation fiber and a multi-pixel photon counter was developed in order to handle a 10 MHz secondary pion beam in the J-PARC E40 experiment. This counter was installed at the entrance of the beam line spectrometer at the K1.8 experimental area in J-PARC and used for the momentum reconstruction. In order to suppress the accidental background and reconstruct the beam momentum, a good timing resolution better than 0.8 ns and a good position resolution better than 200 
m were simultaneously required for the counter. These requirements were well achieved by reading the 320 fibers with a diameter of 1 mm, which were arranged in a staggered position, with MPPC fiber by fiber. The signal induced from each MPPC was handled with an Extended Analogue SiPM Integrated ReadOut Chip (EASIROC) developed by Omega/IN2P3 in France. In addition, the timing of the discriminated signals from EASIROC was measured by a FPGA-based multi-hit TDC implemented into Spartan-6. Finally, we obtained the timing resolution of 0.68 ns and the position resolution of 190 m under the 9 MHz beam condition using a pion beam.
