Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shimazaki, Yosuke; Sawahata, Hiroaki; Kawamoto, Taiki; Suzuki, Hisashi; Shinohara, Masanori; Honda, Yuki; Katsuyama, Kozo; Takada, Shoji; Sawa, Kazuhiro
Journal of Nuclear Engineering and Radiation Science, 2(4), p.041008_1 - 041008_5, 2016/10
Maintenance technologies for the reactor system have been developed by using the high-temperature engineering test reactor (HTTR). One of the important purposes of development is to accumulate the experiences and data to satisfy the availability of operation up to 90% by shortening the duration of the periodical maintenance for the future HTGRs by shifting from the time-based maintenance to condition-based maintenance. The technical issue of the maintenance of in-core neutron detector, wide range monitor (WRM), is to predict the malfunction caused by cable disconnection to plan the replacement schedule. This is because that it is difficult to observe directly inside of the WRM in detail. The electrical inspection method was proposed to detect and predict the cable disconnection of the WRM by remote monitoring from outside of the reactor by using the time domain reflectometry and so on. The disconnection position, which was specified by the electrical method, was identified by non-destructive and destructive inspection. The accumulated data is expected to be contributed for advanced maintenance of future HTGRs.
Shimazaki, Yosuke; Sawahata, Hiroaki; Kawamoto, Taiki; Suzuki, Hisashi; Shinohara, Masanori; Honda, Yuki; Katsuyama, Kozo; Takada, Shoji; Sawa, Kazuhiro
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 7 Pages, 2015/05
Maintenance technologies for the reactor system have been developed by using the high-temperature engineering test reactor (HTTR). One of the important purposes of development is to accumulate the experiences and data to satisfy the availability of operation up to 90% by shortening the duration of the periodical maintenance for the future HTGRs by shifting from the time-based maintenance to condition-based maintenance. The technical issue of the maintenance of in-core neutron detector, wide range monitor (WRM), is to predict the malfunction caused by cable disconnection to plan the replacement schedule. This is because that it is difficult to observe directly inside of the WRM in detail. The electrical inspection method was proposed to detect and predict the cable disconnection of the WRM by remote monitoring from outside of the reactor by using the time domain reflectometry and so on. The disconnection position, which was specified by the electrical method, was identified by non-destructive and destructive inspection. The accumulated data is expected to be contributed for advanced maintenance of future HTGRs.
Murakami, Masanori*; Park, J. M.*; Giruzzi, G.*; Garcia, J.*; Bonoli, P.*; Budny, R. V.*; Doyle, E. J.*; Fukuyama, Atsushi*; Hayashi, Nobuhiko; Honda, Mitsuru; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03
Yamamoto, Masahiro*; Uchiyama, Takashi*; Miyajima, Tsukasa*; Honda, Yosuke*; Sato, Kotaro*; Matsuba, Shunya*; Saito, Yoshio*; Kobayashi, Masanori*; Kurisu, Hiriki*; Hajima, Ryoichi; et al.
Proceedings of 7th Annual Meeting of Particle Accelerator Society of Japan (DVD-ROM), p.717 - 720, 2010/08
A 500-kV photocathode DC electron gun which can supply the beam of a low emittance and a high average current has been developed in collaboration with KEK, JAEA, Hiroshima Univ., Nagoya Univ. and Yamaguchi Univ. The vacuum of the gun chamber has to be lower Extreme High Vacuum for maintain cathode-life time. A titanium chamber and new material of ceramic were employed to reduce outgassing rate. The result of outgassing rate of the gun chamber is described in this report.
Sakanaka, Shogo*; Akemoto, Mitsuo*; Aoto, Tomohiro*; Arakawa, Dai*; Asaoka, Seiji*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05
Future synchrotron light source using a 5-GeV energy recovery linac (ERL) is under proposal by our Japanese collaboration team, and we are conducting R&D efforts for that. We are developing high-brightness DC photocathode guns, two types of cryomodules for both injector and main superconducting (SC) linacs, and 1.3 GHz high CW-power RF sources. We are also constructing the Compact ERL (cERL) for demonstrating the recirculation of low-emittance, high-current beams using above-mentioned critical technologies.
Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Uchiyama, Takashi*; Kobayashi, Masanori*; Muto, Toshiya*; Matsuba, Shunya*; Sakanaka, Shogo*; Sato, Kotaro*; Saito, Yoshio*; et al.
Proceedings of 6th Annual Meeting of Particle Accelerator Society of Japan (CD-ROM), p.860 - 862, 2009/08
A newly 500 kV electron gun (2nd - 500 kV gun) for an ERL light source is designed at KEK. A new concept and state of-the-art technologies of vacuum system, ceramic insulators, high voltage power supply, photocathode and preparation system will be employed. The details are described in this report.
Ito, Kenji*; Oka, Toshitaka*; Kobayashi, Yoshinori*; Shirai, Yasuharu*; Wada, Kenichiro*; Matsumoto, Masataka*; Fujinami, Masanori*; Hirade, Tetsuya; Honda, Yoshihide*; Hosomi, Hiroyuki*; et al.
Materials Science Forum, 607, p.248 - 250, 2009/00
So far no standard procedure for the positron annihilation lifetime (PAL) technique has been established. A lack of the standards has led to difficulty in ensuring the equivalency and reliability of data from different laboratories. As a first, we conducted an interlaboratory comparison of PAL measurements for metal, polymer and silica glass with agreed procedures for data recording and analysis. The PAL data recorded at different laboratories were analyzed with a single lifetime component for the metal sample and with three components for the others, respectively. Based on the results of the reported positron and ortho-positronium lifetimes, the possible sources of the uncertainties in the PAL measurements are discussed. To reduce the effect of scattered 
rays, a lead shield was placed between the detectors. The uncertainty was significantly decreased, signifying that placing lead shields between the detectors effectively reduced the false signals due to the scattered rays.
Ito, Kenji*; Oka, Toshitaka*; Kobayashi, Yoshinori*; Shirai, Yasuharu*; Wada, Kenichiro*; Matsumoto, Masataka*; Fujinami, Masanori*; Hirade, Tetsuya; Honda, Yoshihide*; Hosomi, Hiroyuki*; et al.
Journal of Applied Physics, 104(2), p.026102_1 - 026102_3, 2008/07
Times Cited Count：48 Percentile：83.5(Physics, Applied)Interlaboratory comparison of positron annihilation lifetime measurements using synthetic fused silica and polycarbonate was conducted with the participation of 12 laboratories. By regulating procedures for the measurement and data analysis the uncertainties of the positron lifetimes obtained at different laboratories were significantly reduced in comparison with those reported in the past.
Sakanaka, Shogo*; Ago, Tomonori*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; Harada, Kentaro*; Hiramatsu, Shigenori*; Honda, Toru*; et al.
Proceedings of 11th European Particle Accelerator Conference (EPAC '08) (CD-ROM), p.205 - 207, 2008/06
Future synchrotron light sources based on the energy-recovery linacs (ERLs) are expected to be capable of producing super-brilliant and/or ultra-short pulses of synchrotron radiation. Our Japanese collaboration team is making efforts for realizing an ERL-based hard X-ray source. We report recent progress in our R&D efforts.
Shimomura, Yasuo; Tsunematsu, Toshihide; Yamamoto, Shin; Maruyama, So; Mizoguchi, Tadanori*; Takahashi, Yoshikazu; Yoshida, Kiyoshi; Kitamura, Kazunori*; Ioki, Kimihiro*; Inoue, Takashi; et al.
Purazuma, Kaku Yugo Gakkai-Shi, 78(Suppl.), 224 Pages, 2002/01
no abstracts in English
Mizumoto, Motoharu; Kusano, Joichi; Hasegawa, Kazuo; Ouchi, Nobuo; Oguri, Hidetomo; Kinsho, Michikazu; Tomisawa, Tetsuo; Ito, Takashi; Chishiro, Etsuji*; Ikegami, Masanori*; et al.
Proc. of Int. Symp. on Environment-conscious Innovative Mater. Processing with Advanced Energy Sources, p.71 - 78, 1998/00
no abstracts in English
Mizumoto, Motoharu; Kusano, Joichi; Hasegawa, Kazuo; Ouchi, Nobuo; Oguri, Hidetomo; Kinsho, Michikazu; Chishiro, Etsuji*; Tomisawa, Tetsuo; Touchi, Y.*; Ikegami, Masanori*; et al.
Proc. of XIX Int. Linac Conf. (LINAC98), 1, p.349 - 353, 1998/00
no abstracts in English
Hasegawa, Kazuo; Mizumoto, Motoharu; Kusano, Joichi; Tomisawa, Tetsuo; Ouchi, Nobuo; Oguri, Hidetomo; Kinsho, Michikazu; Touchi, Y.*; Honda, Yoichiro*; Akaoka, Nobuo*; et al.
Proceedings of 23rd Linear Accelerator Meeting in Japan, p.19 - 21, 1998/00
no abstracts in English
Kobayashi, Yoshinori*; Ito, Kenji*; Oka, Toshitaka*; Sakaki, Koji*; Shirai, Yasuharu*; Honda, Yoshihide*; Shimazu, Akira*; Fujinami, Masanori*; Hirade, Tetsuya; Saito, Haruo*; et al.
no journal, ,
For making a standard sample of positron annihilation measurement, quartz glass and polycarbonate were measured with 12 apparatus at AIST, Chiba Univ., Tokyo Univ., Tsukuba Univ., Touhoku Univ., Tokyo Gakugei Univ. JAEA, Nitto Denko, and Toray Research Center. By regulating procedure for the measurement and data analysis the uncertainties of the positron annihilation lifetime obtained at different laboratories were significantly reduced.
Ito, Kenji*; Oka, Toshitaka*; Kobayashi, Yoshinori*; Shirai, Yasuharu*; Wada, Kenichiro*; Matsumoto, Masataka*; Fujinami, Masanori*; Hirade, Tetsuya; Honda, Yoshihide*; Hosomi, Hiroyuki*; et al.
no journal, ,
So far no standard procedure for the positron annihilation lifetime (PAL) technique has been established. A lack of the standards has led to difficulty in ensuring equivalency and reliability of data from different laboratories. Recently, as a first step toward the standardization of the PAL technique, we conducted an interlaboratory comparison of PAL measurements for fused silica, polycarbonate and metal with agreed procedures for data recording and analysis. Based on the results of the reported lifetimes, possible sources of the uncertainties in the PAL measurements is probably caused by the backscattered -rays by other detectors. We succeeded to show that inserting shields between detectors can reduce the uncertainty.
Ito, Kenji*; Oka, Toshitaka*; Kobayashi, Yoshinori*; Shirai, Yasuharu*; Wada, Kenichiro*; Matsumoto, Masataka*; Fujinami, Masanori*; Hirade, Tetsuya; Honda, Yoshihide*; Hosomi, Hiroyuki*; et al.
no journal, ,
An interlaboratory comparison for positron annihilation lifetime measurements for pure nickel, polycarbonate (PC) and fused silica was performed. Based on the reported data of positron (for nickel) and positronium (for PC and fused silica) components, the uncertainties in the PAL measurements were estimated and their possible source was discussed.
Suzuki, Tatsuya*; Honda, Masanori*; Asanuma, Noriko*; Osaka, Masahiko
no journal, ,
Pyridine-resin based ion-exchange method has been proposed as a recovery technique of molybdenum from high level waste. A batch experiment was carried out for the evaluation of Mo distribution coefficient to the pyridine-resin. Zirconium adsorption behavior was also investigated.
Nakata, Motoki; Honda, Mitsuru; Yoshida, Maiko; Urano, Hajime; Maeyama, Shinya; Nunami, Masanori*; Watanabe, Tomohiko*
no journal, ,
First-principle based gyrokinetic simulation is a powerful method for investigating turbulent transport in magnetically confined fusion plasmas, and the quantitative evaluations of the prediction capability through comparisons with existing experiments and the model improvement are important issues. In this study, a local gyrokinetic turbulence code GKV-J is extended to incorporate realistic tokamak equilibria to realize the first principle based turbulent transport simulations on JT-60U tokamak. In addition to clarifications of the micro-stability properties depending on the radial locations, the turbulence simulation results successfully reproduce the experimental results on ion and electron heat diffusivity in the core region, where the conventional fluid-type reduced transport model shows some deviations. Also, the impact of shaping on turbulent transport properties is identified for JT-60SA tokamak.
Nakata, Motoki; Honda, Mitsuru; Yoshida, Maiko; Urano, Hajime; Maeyama, Shinya; Nunami, Masanori*; Watanabe, Tomohiko*
no journal, ,
First-principle based gyrokinetic simulation is a promising approach for investigating turbulent transport in future burning plasmas such as ITER an DEMO. In this study, ITG-TEM driven turbulent transport simulations on the realistic JT-60U tokamak equilibrium are realized by using a local gyrokinetic turbulence code GKV-J. Linear micro-stability analyses on several radial locations revealed that ITG, ITG-TEM, and TEM modes are dominant for inner, middle, and outer core regions, respectively. The nonlinear turbulence simulation results successfully reproduce the experimental results on ion and electron heat diffusivity in the core region, where the conventional fluid-type reduced transport model shows some deviations. Also, different nonlinear dependences of the turbulence/zonal-flow energy on the ion/electron heat and particle transport levels are newly identified, i.e., weaker impact on the electron heat and particle transport compared to the ion heat one.
