Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Taya, Hidetoshi*; Park, A.*; Cho, S.*; Gubler, P.; Hattori, Koichi*; Hong, J.*; Huang, X.-G.*; Lee, S. H.*; Monnai, Akihiko*; Onishi, Akira*; et al.
Physical Review C, 102(2), p.021901_1 - 021901_6, 2020/08
Times Cited Count：8 Percentile：69.78(Physics, Nuclear)Kim, H.-S.*; Jeon, Y. M.*; Na, Y.-S.*; Ghim, Y.-C.*; Ahn, J.-W.*; Yoon, S. W.*; Bak, J. G.*; Bae, Y. S.*; Kim, J. S.*; Joung, M.*; et al.
Nuclear Fusion, 54(8), p.083012_1 - 083012_11, 2014/08
Times Cited Count：8 Percentile：37.63(Physics, Fluids & Plasmas)We evaluate the characteristics of global energy confinement in KSTAR (
) quantitatively by comparing it with multi-machine scalings, by deriving multiple regression equations for the L- and the H-mode plasmas, and evaluating confinement enhancement of the H-mode phase compared with the L-mode phase in each discharge. From the KSTAR database, of L-mode plasmas exhibits 
s to 
s and of H-mode plasmas 
s to 
s. The multiple regression equations derived by statistical analysis present the similar dependency on PL and slightly higher dependency on IP compared with the multi-machine scalings, however the dependency on elongation 
in both L- and H-mode plasmas draw the negative power dependency of 
and 
for H-mode and for L- mode database, respectively on the contrary to the positive dependency in all multi-machine empirical scalings. Although the reason is not clear yet, two possibilities are addressed. One is that the wall condition of KSTAR was not clean enough. The other is that striking points on the divertor plate were uncontrolled. For these reasons, as increases, the impurities from the wall can penetrate into plasmas easily. As a consequence, the confinement is degraded on the contrary to the expectation of multi-machine scalings.
Yoon, S. W.*; Ahn, J.-W.*; Jeon, Y. M.*; Suzuki, Takahiro; Hahn, S. H.*; Ko, W. H.*; Lee, K. D.*; Chung, J. I.*; Nam, Y. U.*; Kim, J.*; et al.
Nuclear Fusion, 51(11), p.113009_1 - 113009_9, 2011/11
Times Cited Count：33 Percentile：79.01(Physics, Fluids & Plasmas)Typical ELMy H-mode discharges have been achieved on the KSTAR tokamak with the combined auxiliary heating of NBI and ECRH. The minimum external heating power required is about 1.1 MW at a line-averaged density higher than 1.4
10
m
and a toroidal field of 2 T. There is a clear indication of the increase of the L-H threshold power at densities lower than 
. The initial analysis of energy confinement time (
) predicted that was higher than the prediction of multi-machine scaling laws by a factor 1.4-1.6. However, when the contribution of fast ion confinement to the total energy was taken into account, better agreed with the scaling results. A clear increase of electron and ion temperature in the pedestal was observed in the H-mode phase but the core ion temperature did not change significantly. On the other hand, the toroidal rotation also increased over all radii in the H-mode phase. The measured ELM frequency was from 30-50 Hz and the drop of total energy appeared to be less than 5%. Between large ELM spikes, small/grassy ELMs were also identified when mixed heating of NBI and ECRH was applied.
collisions at 
= 200 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review D, 84(1), p.012006_1 - 012006_18, 2011/07
Times Cited Count：29 Percentile：72.31(Astronomy & Astrophysics)We report on the event structure and double helicity asymmetry (
) of jet production in longitudinally polarized collisions at = 200 GeV. Photons and charged particles were measured by the PHENIX experiment. Event structure was compared with the results from PYTHIA event generator. The production rate of reconstructed jets is satisfactorily reproduced with the next-to-leading-order perturbative QCD calculation. We measured = -0.0014 
0.0037 at the lowest 
bin and -0.0181 0.0282 at the highest bin. The measured is compared with the predictions that assume various 
distributions.
collisions at = 200 and 62.4 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06
Times Cited Count：184 Percentile：99.44(Physics, Nuclear)Transverse momentum distributions and yields for 
, and 
in collisions at = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the RHIC. We present the inverse slope parameter, mean transverse momentum, and yield per unit rapidity at each energy, and compare them to other measurements at different collisions. We also present the scaling properties such as 
and 
scaling and discuss the mechanism of the particle production in collisions. The measured spectra are compared to next-to-leading order perturbative QCD calculations.
and Au+Au collisions at 
= 200 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Aramaki, Y.*; et al.
Physical Review C, 83(4), p.044912_1 - 044912_16, 2011/04
Times Cited Count：8 Percentile：49.7(Physics, Nuclear)Measurements of electrons from the decay of open-heavy-flavor mesons have shown that the yields are suppressed in Au+Au collisions compared to expectations from binary-scaled collisions. Here we extend these studies to two particle correlations where one particle is an electron from the decay of a heavy flavor meson and the other is a charged hadron from either the decay of the heavy meson or from jet fragmentation. These measurements provide more detailed information about the interaction between heavy quarks and the quark-gluon matter. We find the away-side-jet shape and yield to be modified in Au+Au collisions compared to collisions.
+ collisions at = 200 GeV and scaling properties of hadron productionAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review D, 83(5), p.052004_1 - 052004_26, 2011/03
Times Cited Count：175 Percentile：98.48(Astronomy & Astrophysics)The PHENIX experiment at RHIC has measured the invariant differential cross section for production of 
, 
, 
and 
mesons in collisions at = 200 GeV. The spectral shapes of all hadron transverse momentum distributions are well described by a Tsallis distribution functional form with only two parameters, 
and 
, determining the high 
and characterizing the low regions for the spectra, respectively. The integrated invariant cross sections calculated from the fitted distributions are found to be consistent with existing measurements and with statistical model predictions.
Yang, H. L.*; Kim, Y. S.*; Park, Y. M.*; Bae, Y. S.*; Kim, H. K.*; Kim, K. M.*; Lee, K. S.*; Kim, H. T.*; Bang, E. N.*; Joung, M.*; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03
Because the 2010 operation of Korea Superconducting Tokamak Advanced Research (KSTAR) mainly aims to achieve strongly elongated and diverted plasma, all the necessary hardware systems to provide an essential circumstance for the plasma shaping were newly installed and upgraded in 2010. In this paper, general configuration of the upgraded systems described earlier will be outlined. Moreover, several key performances and test results of the systems will be also reported in summary.
Ioki, Kimihiro; Elio, F.*; Barabash, V.*; Chuyanov, V.*; Rozov, V.*; Wang, X.*; Chen, J.*; Wang, L.*; Lorenzetto, P.*; Peacock, A.*; et al.
Fusion Engineering and Design, 82(15-24), p.1774 - 1780, 2007/10
Times Cited Count：13 Percentile：66.15(Nuclear Science & Technology)In December 2005, the new procurement allocation plan of the ITER components among the seven Parties was prepared. The need to qualify for procurement of the specific components was especially introduced in the document. The main features and milestones of the qualification program are described in "Procurement Plan" for each specific component. Due to the complicated features of FW procurement, the procurement document has to be developed precisely. To guarantee high quality of 1700 FW panels produced by 6 different Parties, a qualification program is essential. The qualification mock-up is 80 mm wide, 240 mm long and 81 mm thick with 3 beryllium tiles 10 mm thick. Heat load tests will be performed on the qualification mock-ups in 2007 in EU and USA facilities. The maximum design heat load on the ITER FW is 0.5 MW/m 
(steady state) 30,000 shots. Mechanical tests of joints are also required using standardized methods. Only Parties which have satisfied the acceptance criteria of the qualification tests can proceed to the procurement stage of the ITER FW. Semi-prototypes (roughly 1000 mm 200 mm) are also requested before the ITER FW manufacturing.
hole-assisted electronic processes in the Pr
Sr
MnO
(x=0.0, 0.3) systemIbrahim, K.*; Qian, H. J.*; Wu, X.*; Abbas, M. I.*; Wang, J. O.*; Hong, C. H.*; Su, R.*; Zhong, J.*; Dong, Y. H.*; Wu, Z. Y.*; et al.
Physical Review B, 70(22), p.224433_1 - 224433_9, 2004/12
Times Cited Count：29 Percentile：75.08(Materials Science, Multidisciplinary)no abstracts in English
Danchenkov, M. A.*; Togawa, Orihiko; Hong, G. H.*
Proceedings of International Symposium on Oceanography of the Japan Sea (CREAMS-2000), p.188 - 192, 2000/00
no abstracts in English
