First-principles simulation of an ejected electron produced by monochromatic deposition energy to water at the femtosecond order

Kai, Takeshi; Toigawa, Tomohiro; Matsuya, Yusuke; Hirata, Yuho; Tezuka, Tomoya*; Tsuchida, Hidetsugu*; Yokoya, Akinari*

RSC Advances (Internet), 13(46), p.32371 - 32380, 2023/11

https://doi.org/10.1039/D3RA05075K

Although scientific knowledge of photolysis and radiolysis of water is widely used in the life sciences and other fields, the formation mechanism of the spatial distribution of hydrated electrons (spur) resulting from energy deposition to water is still not well understood. The chemical reaction times of hydrated electrons, OH radicals, and HO in the spur strongly depend on the spur radius. In our previous study, we elucidated the mechanism at a specific given energy (12.4 eV) by first-principles calculations. In the present study, we performed first-principles calculations of the spur radius at the deposition energies of 11-19 eV. The calculated spur radius is 3-10 nm, which is consistent with the experimental prediction (~4 nm) for the energy range of 8-12.4 eV, and the spur radius gradually increases with increasing energy. The spur radius is a new scientific knowledge and is expected to be widely used for estimating radiation DNA damage.

Progress report of Japanese simulation research projects using the high-performance computer system Helios in the International Fusion Energy Research Centre

Ishizawa, Akihiro*; Idomura, Yasuhiro; Imadera, Kenji*; Kasuya, Naohiro*; Kanno, Ryutaro*; Satake, Shinsuke*; Tatsuno, Tomoya*; Nakata, Motoki*; Nunami, Masanori*; Maeyama, Shinya*; et al.

Purazuma, Kaku Yugo Gakkai-Shi, 92(3), p.157 - 210, 2016/03

http://www.jspf.or.jp/Journal/PDF_JSPF/jspf2016_03/jspf2016_03-157.pdf

The high-performance computer system Helios which is located at The Computational Simulation Centre (CSC) in The International Fusion Energy Research Centre (IFERC) started its operation in January 2012 under the Broader Approach (BA) agreement between Japan and the EU. The Helios system has been used for magnetised fusion related simulation studies in the EU and Japan and has kept high average usage rate. As a result, the Helios system has contributed to many research products in a wide range of research areas from core plasma physics to reactor material and reactor engineering. This project review gives a short catalogue of domestic simulation research projects. First, we outline the IFERC-CSC project. After that, shown are objectives of the research projects, numerical schemes used in simulation codes, obtained results and necessary computations in future.

Conceptual design of the SlimCS fusion DEMO reactor

Tobita, Kenji; Nishio, Satoshi*; Enoeda, Mikio; Nakamura, Hirofumi; Hayashi, Takumi; Asakura, Nobuyuki; Uto, Hiroyasu; Tanigawa, Hiroyasu; Nishitani, Takeo; Isono, Takaaki; et al.

JAEA-Research 2010-019, 194 Pages, 2010/08

JAEA-Research-2010-019-01.pdf:48.47MB
JAEA-Research-2010-019-02.pdf:19.4MB

This report describes the results of the conceptual design study of the SlimCS fusion DEMO reactor aiming at demonstrating fusion power production in a plant scale and allowing to assess the economic prospects of a fusion power plant. The design study has focused on a compact and low aspect ratio tokamak reactor concept with a reduced-sized central solenoid, which is novel compared with previous tokamak reactor concept such as SSTR (Steady State Tokamak Reactor). The reactor has the main parameters of a major radius of 5.5 m, aspect ratio of 2.6, elongation of 2.0, normalized beta of 4.3, fusion out put of 2.95 GW and average neutron wall load of 3 MW/m. This report covers various aspects of design study including systemic design, physics design, torus configuration, blanket, superconducting magnet, maintenance and building, which were carried out increase the engineering feasibility of the concept.

SlimCS; Compact low aspect ratio DEMO reactor with reduced-size central solenoid

Tobita, Kenji; Nishio, Satoshi; Sato, Masayasu; Sakurai, Shinji; Hayashi, Takao; Shibama, Yusuke; Isono, Takaaki; Enoeda, Mikio; Nakamura, Hirofumi; Sato, Satoshi; et al.

Nuclear Fusion, 47(8), p.892 - 899, 2007/08

https://doi.org/10.1088/0029-5515/47/8/022

The concept for a compact DEMO reactor named "SlimCS" is presented. Distinctive features of the concept is low aspect ratio ( = 2.6) and use of a reduced-size center solenoid (CS) which has a function of plasma shaping rather than poloidal flux supply. The reduced-size CS enables us to introduce a thin toroidal field (TF) coil system which contributes to reducing the weight and construction cost of the reactor. SlimCS is as compact as advanced commercial reactor designs such as ARIES-RS and produces 1 GWe in spite of moderate requirements for plasma parameters. Merits of low-, i.e. vertical stability for high elongation and high beta limit are responsible for such reasonable physics requirements.

Design study of fusion DEMO plant at JAERI

Tobita, Kenji; Nishio, Satoshi; Enoeda, Mikio; Sato, Masayasu; Isono, Takaaki; Sakurai, Shinji; Nakamura, Hirofumi; Sato, Satoshi; Suzuki, Satoshi; Ando, Masami; et al.

Fusion Engineering and Design, 81(8-14), p.1151 - 1158, 2006/02

https://doi.org/10.1016/j.fusengdes.2005.08.058

no abstracts in English

Development of synthesis process of nikel oxide powder by microwave

Segawa, Tomoomi; Suzuki, Masahiro; Fujii, Kanichi; Igawa, Yusuke*; Arimitsu, Naoki*; Yamamoto, Tetsuya*; Fukui, Kunihiro*; Yoshida, Hideto*

no journal, , 

The synthesis process of the denitration reaction by the microwave heating method was investigated using a nickel nitrate (Ni(NO)) aqueous solution. NiO powder cannot be obtained from Ni(NO) aqueous solution by the microwave heating method because of low microwave absorption of the intermediate obtained from nitrate aqueous solution. In the present work, it was showed that Ni(NO) aqueous solution with 6.0 g of NiO powder as a microwave absorber can be completely converted to NiO powder by microwave heating. NiO powder promotes the denitration reaction, and reduces the required reaction time with increasing the amount of NiO powder. Furthermore the adiabator was set around the reactor in order to equalize the temperature distribution in the reactor. It was also found that the denitration efficiency of Ni(NO) aqueous solution to NiO powder can be improved by using the adiabator when the center of the reactor has the same temperature.