Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamauchi, Kunihito; Okano, Jun; Shimada, Katsuhiro; Omori, Yoshikazu; Terakado, Tsunehisa; Matsukawa, Makoto; Koide, Yoshihiko; Kobayashi, Kazuhiro; Ikeda, Yoshitaka; Fukumoto, Masahiro; et al.
JAEA-Technology 2015-053, 36 Pages, 2016/03
JAEA-Technology-2015-053.pdf:8.33MB
The superconducting Satellite Tokamak machine "JT-60SA" under construction in Naka Fusion Institute is an international collaborative project between Japan (JA) and Europe (EU). The contributions for this project are based on the supply of components, and thus European manufacturer shall conduct the installation, commissioning and tests on Naka site. This means that Japan Atomic Energy Agency (JAEA) had a quite difficult issue to manage the works by European workers and their safety although there is no direct contract. This report describes the approaches for the work and safety managements, which were agreed with EU after the tough negotiation, and then the completed on-site works for Quench Protection Circuits (QPC) as the first experience for EU in JT-60SA project. With the help of these approaches by JAEA, the EU works for QPC were successfully completed with no accident, and a great achievement was made for both EU and JA.
Okumura, Yoshikazu; Gobin, R.*; Knaster, J.*; Heidinger, R.*; Ayala, J.-M.*; Bolzon, B.*; Cara, P.*; Chauvin, N.*; Chel, S.*; Gex, D.*; et al.
Review of Scientific Instruments, 87(2), p.02A739_1 - 02A739_3, 2016/02
Times Cited Count：7 Percentile：35.23(Instruments & Instrumentation)IFMIF is an accelerator based neutron facility having two set of linear accelerators each producing 125mA/CW deuterium ion beams (250mA in total) at 40MeV. The LIPAc (Linear IFMIF Prototype Accelerator) being developed in the IFMIF-EVEDA project consists of an injector, a RFQ accelerator, and a part of superconducting Linac, whose target is to demonstrate 125mA/CW deuterium ion beam acceleration up to 9MeV. The injector has been developed in CEA Saclay and already demonstrated 140mA/100keV deuterium beam. The injector was disassembled and delivered to the International Fusion Energy Research Center (IFERC) in Rokkasho, Japan, and the commissioning has started after its reassembly 2014; the first beam production has been achieved in November 2014. Up to now, 100keV/120mA/CW hydrogen ion beam has been produced with a low beam emittance of 0.2 
.mm.mrad (rms, normalized).
/D ion source for IFMIF (International Fusion Materials Irradiation Facility)Shinto, Katsuhiro; Sen
e, F.*; Ayala, J.-M.*; Bolzon, B.*; Chauvin, N.*; Gobin, R.*; Ichimiya, Ryo; Ihara, Akira; Ikeda, Yukiharu; Kasugai, Atsushi; et al.
Review of Scientific Instruments, 87(2), p.02A727_1 - 02A727_3, 2016/02
Times Cited Count：8 Percentile：39.15(Instruments & Instrumentation)Okumura, Yoshikazu; Ayala, J.-M.*; Bolzon, B.*; Cara, P.*; Chauvin, N.*; Chel, S.*; Gex, D.*; Gobin, R.*; Harrault, F.*; Heidinger, R.*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.203 - 205, 2015/09
Under the framework of Broader Approach (BA) agreement between Japan and Euratom, IFMIF/EVEDA project was launched in 2007 to validate the key technologies to realize IFMIF. The most crucial technology to realize IFMIF is two set of linear accelerator each producing 125mA/CW deuterium ion beams up to 40MeV. The prototype accelerator, whose target is 125mA/CW deuterium ion beam acceleration up to 9MeV, is being developed in International Fusion Research Energy Center (IFERC) in Rokkasho, Japan. The injector developed in CEA Saclay was delivered in Rokkasho in 2014, and is under commissioning. Up to now, 100keV/120mA/CW hydrogen ion beams and 100keV/90mA/CW duty deuterium ion beams are successfully produced with a low beam emittance of 0.21 .mm.mrad (rms, normalized). Delivery of RFQ components will start in 2015, followed by the installation of RF power supplies in 2015.
Nakamura, Takehiko; Ikeda, Yoshikazu; Yachi, Shigeyasu; Ogawara, Masami; Yoshinaga, Makio; Takariko, Isao; Toyokawa, Shunji; Katanishi, Shoji; Sobajima, Makoto
JAERI-Tech 2000-019, p.162 - 0, 2000/03
JAERI-Tech-2000-019.pdf:6.02MB
no abstracts in English
Ando, Toshinari; Hiyama, Tadao; Takahashi, Yoshikazu; Nakajima, Hideo; Kato, Takashi; Sugimoto, Makoto; Isono, Takaaki; Kawano, Katsumi; Koizumi, Norikiyo; Hamada, Kazuya; et al.
IEEE Transactions on Applied Superconductivity, 9(2), p.628 - 631, 1999/06
Times Cited Count：8 Percentile：51.51(Engineering, Electrical & Electronic)no abstracts in English
Kambara, Toyozo; Uno, Hidero; Shoda, Katsuhiko; Hirata, Yutaka; Shoji, Tsutomu; Kohayakawa, Toru; Takayanagi, Hiroshi; Fujimura, Tsutomu; Morita, Morito; Ichihara, Masahiro; et al.
JAERI 1045, 11 Pages, 1963/03
no abstracts in English
Arai, Yoichi; Hinai, Hiroshi; Koma, Yoshikazu; Ikeda, Akira*; Obata, Masamichi*; Shibata, Atsuhiro; Nomura, Kazunori
no journal, ,
no abstracts in English
