Irradiation test using foreign reactor, 1; Study of irradiation test with capsule temperature control system (Joint research)

Takabe, Yugo; Otsuka, Noriaki; Fuyushima, Takumi; Sayato, Natsuki; Inoue, Shuichi; Morita, Hisashi; Jaroszewicz, J.*; Migdal, M.*; Onuma, Yuichi; Tobita, Masahiro*; et al.

JAEA-Technology 2022-040, 45 Pages, 2023/03

JAEA-Technology-2022-040.pdf:6.61MB

Because of the decommission of the Japan Materials Testing Reactor (JMTR), the domestic neutron irradiation facility, which had played a central role in the development of innovative nuclear reactors and the development of technologies to further improve the safety, reliability, and efficiency of light water reactors, was lost. Therefore, it has become difficult to pass on the operation techniques of the irradiation test reactors and irradiation technologies, and to train human resources. In order to cope with these issues, we conducted a study on the implementation of irradiation tests using overseas reactors as neutron irradiation sites as an alternative method. Based on the "Arrangement between the National Centre for Nuclear Research and the Japan Atomic Energy Agency for Cooperation in Research and Development on Testing Reactor," the feasibility of conducting an irradiation test at the MARIA reactor (30 MW) owned by the National Centre for Nuclear Research (NCBJ) using the temperature control system, which is one of the JMTR irradiation technologies, was examined. As a result, it was found that the irradiation test was possible by modifying the ready-made capsule manufactured in accordance with the design and manufacturing standards of the JMTR. After the modification, a penetration test, an insulation continuity test, and an operation test in the range of room temperature to 300C, which is the operating temperature of the capsule, were conducted and favorable results were obtained. We have completed the preparations prior to transport to the MARIA reactor.

Chemical characterization of a volatile dubnium compound, DbOCl

Chiera, N. M.*; Sato, Tetsuya; Eichler, R.*; Tomitsuka, Tomohiro; Asai, Masato; Adachi, Sadia*; Dressler, R.*; Hirose, Kentaro; Inoue, Hiroki*; Ito, Yuta; et al.

Angewandte Chemie; International Edition, 60(33), p.17871 - 17874, 2021/08

https://doi.org/10.1002/anie.202102808

The formation and the chemical characterization of single atoms of dubnium (Db, element 105), in the form of its volatile oxychloride, was investigated using the on-line gas phase chromatography technique, in the temperature range 350 - 600 C. Under the exact same chemical conditions, comparative studies with the lighter homologs of group-5 in the Periodic Table clearly indicate the volatility sequence being NbOCl TaOCl DbOCl. From the obtained experimental results, thermochemical data for DbOCl were derived. The present study delivers reliable experimental information for theoretical calculations on the chemical properties of transactinides.

A Review of separation processes proposed for advanced fuel cycles based on technology readiness level assessments

Baron, P.*; Cornet, S. M.*; Collins, E. D.*; DeAngelis, G.*; Del Cul, G.*; Fedorov, Y.*; Glatz, J. P.*; Ignatiev, V.*; Inoue, Tadashi*; Khaperskaya, A.*; et al.

Progress in Nuclear Energy, 117, p.103091_1 - 103091_24, 2019/11

https://doi.org/10.1016/j.pnucene.2019.103091

The results of an international review of separation processes for spent nuclear fuel (SNF) recycling in future closed fuel cycles with the evaluation of Technology Readiness Level are reported. This study was made by the Expert Group on Fuel Recycling Chemistry (EGFRC) organised by the Nuclear Energy Agency (NEA) of the Organisation for Economic Co-operation and Development (OECD). A unique feature of this study was that processes were classified according to a hierarchy of separations aimed at different elements within spent fuel (uranium; uranium-plutonium co-recovery; minor actinides; high heat generating radionuclides) and also the Head-end processes, used to prepare the SNF for chemical separation, were included. Separation processes covered both wet (hydrometallurgical) and dry (pyro-chemical) processes.

Arc discharge characteristics of a long pulse ion source for the KSTAR neutral beam injector

Chang, D. H.*; Jeong, S. H.*; Jin, J. T.*; Chang, D. S.*; Kim, T. S.*; Lee, K. W.*; In, S. R.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Journal of the Korean Physical Society, 59(2), p.275 - 280, 2011/08

https://doi.org/10.3938/jkps.59.275

A long pulse ion source (LPIS) for the neutral beam injector (NBI) has been developed for the Korea Superconducting Tokamak Advanced Research (KSTAR) superconducting tokamak. The arc discharge characteristics of the ion source were investigated on the first KSTAR neutral beam injector (NBI-1). The ion source consists of a magnetic bucket plasma generator with multi-pole cusp fields and a set of prototype tetrode accelerators with circular apertures. Stable and efficient arc plasmas up to an arc power of 70 kW have been produced by using a constant power-mode operation of the arc power supply. The reliable operation region of the arc discharges has been investigated for various filament heating voltages, arc powers, and amounts of injected deuterium gas.

Results of beam extraction performance for the KSTAR neutral beam injector

Chang, D. H.*; Jeong, S. H.*; Kim, T. S.*; Lee, K. W.*; In, S. R.*; Jin, J. T.*; Chang, D. S.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Japanese Journal of Applied Physics, 50(6), p.066302_1 - 066302_7, 2011/06

https://doi.org/10.1143/JJAP.50.066302

A stable ion beam extraction of the LPIS-1 was achieved up to 85 kV/32 A for a 5 s pulse length and 80 kV/25 A for a 14 s pulse length. An optimum beam perveance of 1.15 perv was observed at an acceleration voltage of 60 kV. Neutralization efficiency was measured by a water-flow calorimetry (WFC) method using a calorimeter and the operation of a bending magnet. The full-energy species of ion beams were detected by using the diagnostic method of optical multichannel analyzer (OMA). An arc efficiency of the LPIS was 0.6-1.1 A/kW depending on the operating conditions of arc discharge. A neutral beam power of 1.0 MW must be sufficiently injected into the KSTAR plasmas from the LPIS-1 at a beam energy of 80 keV.

Measurement of neutral mesons in + collisions at = 200 GeV and scaling properties of hadron production

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.

Physical Review D, 83(5), p.052004_1 - 052004_26, 2011/03

https://doi.org/10.1103/PhysRevD.83.052004

The PHENIX experiment at RHIC has measured the invariant differential cross section for production of , , and mesons in collisions at = 200 GeV. The spectral shapes of all hadron transverse momentum distributions are well described by a Tsallis distribution functional form with only two parameters, and , determining the high and characterizing the low regions for the spectra, respectively. The integrated invariant cross sections calculated from the fitted distributions are found to be consistent with existing measurements and with statistical model predictions.

Progress on the heating and current drive systems for ITER

Jacquinot, J.*; Albajar, F.*; Beaumont, B.*; Becoulet, A.*; Bonicelli, T.*; Bora, D.*; Campbell, D.*; Chakraborty, A.*; Darbos, C.*; Decamps, H.*; et al.

Fusion Engineering and Design, 84(2-6), p.125 - 130, 2009/06

https://doi.org/10.1016/j.fusengdes.2009.01.100

The electron cyclotron (EC), ion cyclotron (IC), neutral beam (NB) and, lower hybrid (LH) systems for ITER have been reviewed in 2007/2008 in light of progress of physics and technology. Although the overall specifications are unchanged, notable changes have been approved. Firstly, the full 73MW should be commissioned and available on a routine basis before the D/T phase. Secondly, the possibility to operate the NB at full power during the hydrogen phase requiring new shine through protection; IC with 2 antennas with increased robustness; 2 MW transmission systems to provide an easier upgrading of the EC power; the addition of a building dedicated to the RF power sources and to a testing facility for acceptance of diagnostics and heating port plugs. Thirdly, the need of a plan for developing, in time for the active phase, a CD system such as LH suitable for very long pulse operation of ITER was recognized.

Optimization of the accelerators for the ITER neutral beam injector project

Antoni, V.*; Agostinetti, P.*; Cavenago, M.*; DeEsch, H. P. L.*; Fubiani, G.*; Pilan, N.*; Serianni, G.*; Veltri, P.*; NBI RFX Team*; Kashiwagi, Mieko; et al.

Proceedings of 18th International Toki Conference on Development of Physics and Technology of Stellarator/Heliotrons en route to Demo (ITC-18) (CD-ROM), p.149 - 152, 2008/12

In order to deliver a total of 33 MW of auxiliary heating power, each of the two Neutral Beam Injectors (NBI) foreseen for ITER is designed to provide acceleration up to 1 MV of a 40 A current of Deuterium negative ions. The status of the project will be reviewed focusing on the aspects related to the ion acceleration. As the reference design, a Multi Aperture Multi Grid (MAMuG) accelerator with five grids was adapted. In order to speed up the test of the system, the NBI Test facility in Padova will host a dedicated experiment aimed to optimise the Radio Frequency negative ion source. In physics design of accelerator, the particle (ions and electrons) acceleration and the interaction of the ions with the background gas and the grid surfaces are described by using a Monte Carlo programme. The thermo-mechanical analysis of the grids has been performed taking into account the power load due to co-extracted and secondary electrons.

Spectroscopic characterization of an ultrashort-pulse-laser-driven Ar cluster target incorporating both Boltzmann and particle-in-cell models

Sherrill, M. E.*; Abdallah, J. Jr.*; Csanak, G.*; Dodd, E. S.*; Fukuda, Yuji; Akahane, Yutaka; Aoyama, Makoto; Inoue, Norihiro*; Ueda, Hideki*; Yamakawa, Koichi; et al.

Physical Review E, 73(6), p.066404_1 - 066404_6, 2006/06

https://doi.org/10.1103/PhysRevE.73.066404

A model that solves simultaneously both the electron and atomic kinetics was used to generate synthetic He X-ray spectra to characterize a high intensity ultrashort laser driven Ar cluster target experiment. In particular, level populations were obtained from a detailed collisional-radiative model where collisional rates were computed from a time varying electron distribution function obtained from the solution of the zero dimensional Boltzmann equation. In addition, aparticle-in-cell simulation was used to model the laser interaction with the cluster target and provided the initial electron energy distribution function (EEDF) for the Boltzmann solver. This study suggests that the high density plasma contribution to the time-integrated He spectrum was in a highly non-equilibrium state in both the EEDF and the ion level populations and provides a prediction of 5.7 ps for the average cluster integrity time for this high density state.

Microdroplet evolution induced by a laser pulse

Smirnov, M. B.*; Skobelev, I. Y.*; Magunov, A. I.*; Faenov, A. Y.*; Pikuz, T. A.*; Fukuda, Yuji; Yamakawa, Koichi; Akahane, Yutaka; Aoyama, Makoto; Inoue, Norihiro*; et al.

Journal of Experimental and Theoretical Physics, 98(6), p.1123 - 1132, 2004/06

Interaction between high-power ultrashort laser pulse and giant clusters (microdroplets) consisting of 10 to 10 atoms is considered. The microdroplet size is comparable to the laser wavelength. A model of the evolution of a microdroplet plasma induced by a high-power laser pulse is developed, and the processes taking place after interaction with the pulse are analyzed. It is shown theoretically that the plasma is superheated: its temperature is approximately equal to the ionization potential of an ion having a typical charge. The microdroplet plasma parameters are independent of the pulse shape and duration. The theoretical conclusions are supported by experimental studies of X-ray spectra conducted at JAERI, where a 100-terawatt Ti-sapphire lasersystem was used to irradiate krypton and xenon microdroplets by laser pulses with pulse widths of 30 to 500 fs and intensities of 610 to 210 W/cm.