Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ishitsuka, Etsuo; Mitsui, Wataru*; Yamamoto, Yudai*; Nakagawa, Kyoichi*; Ho, H. Q.; Ishii, Toshiaki; Hamamoto, Shimpei; Nagasumi, Satoru; Takamatsu, Kuniyoshi; Kenzhina, I.*; et al.
JAEA-Technology 2021-016, 16 Pages, 2021/09
As a summer holiday practical training 2020, the feasibility study for nuclear design of a nuclear battery using HTTR core was carried out, and the downsizing of reactor core were studied by the MVP-BURN. As a result, it is clear that a 1.6 m radius reactor core, containing 54 (183 layers) fuel blocks with 20% enrichment of U, and BeO neutron reflector, could operate continuously for 30 years with thermal power of 5 MW. Number of fuel blocks of this compact core is 36% of the HTTR core. As a next step, the further downsizing of core by changing materials of the fuel block will be studied.
Kurita, Keisuke; Miyoshi, Yuta*; Nagao, Yuto*; Yamaguchi, Mitsutaka*; Suzui, Nobuo*; Yin, Y.-G.*; Ishii, Satomi*; Kawachi, Naoki*; Hidaka, Kota*; Yoshida, Eiji*; et al.
QST-M-29; QST Takasaki Annual Report 2019, P. 106, 2021/03
Ishitsuka, Etsuo; Nakashima, Koki*; Nakagawa, Naoki*; Ho, H. Q.; Ishii, Toshiaki; Hamamoto, Shimpei; Takamatsu, Kuniyoshi; Kenzhina, I.*; Chikhray, Y.*; Matsuura, Hideaki*; et al.
JAEA-Technology 2020-008, 16 Pages, 2020/08
As a summer holiday practical training 2019, the feasibility study for nuclear design of a nuclear battery using HTTR core was carried out, and the U enrichment and burnable poison of the fuel, which enables continuous operation for 30 years with thermal power of 5 MW, were studied by the MVP-BURN. As a result, it is clear that a fuel with U enrichment of 12%, radius of burnable poison and natural boron concentration of 1.5 cm and 2wt% are required. As a next step, the downsizing of core will be studied.
Nakayama, Masashi; Saiga, Atsushi; Kimura, Shun; Mochizuki, Akihito; Aoyagi, Kazuhei; Ono, Hirokazu; Miyakawa, Kazuya; Takeda, Masaki; Hayano, Akira; Matsuoka, Toshiyuki; et al.
JAEA-Research 2019-013, 276 Pages, 2020/03
The Horonobe Underground Research Laboratory (URL) Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies for geological disposal of High-level Radioactive Waste through investigations of the deep geological environment within the host sedimentary rock at Horonobe Town in Hokkaido, north Japan. The investigations will be conducted in three phases, namely "Phase 1: Surface based investigations", "Phase 2: Construction phase" (investigations during construction of the underground facilities) and "Phase 3: Operation phase" (research in the underground facilities). According to the research plan described in the 3rd Mid- and Long- term Plan of JAEA, "Near-field performance study", "Demonstration of repository design option", and "Verification of crustal-movement buffering capacity of sedimentary rocks" are important issues of the Horonobe URL Project, and schedule of future research and backfill plans of the project will be decided by the end of 2019 Fiscal Year. The present report summarizes the research and development activities of these 3 important issues carried out during 3rd Medium to Long-term Research Phase.
Wakui, Takashi; Ishii, Hideaki*; Naoe, Takashi; Kogawa, Hiroyuki; Haga, Katsuhiro; Wakai, Eiichi; Takada, Hiroshi; Futakawa, Masatoshi
Materials Transactions, 60(6), p.1026 - 1033, 2019/06
Times Cited Count:3 Percentile:18.28(Materials Science, Multidisciplinary)The mercury target has large size as 1.31.32.5 m. In view of reducing the amount of wastes, we studied the structure so that the fore part could be separated. The flange is required to have high seal performance less than 110 Pa m/s. Invar with low thermal expansion is a candidate. Due to its low stiffness, however, the flange may deform when it is fastened by bolts. Practically invar is reinforced with stainless steel where all interface between them has to be bonded completely with the HIP bonding. In this study, we made specimens at four temperatures and conducted tensile tests. The specimen bonded at 973 K had little diffusion layer, and so fractured at the interface. The tensile strength reduced with increasing the temperature, and the reduced amount was about 10% at 1473 K. The analyzed residual stresses near the interface increased by 50% at maximum. Then, we concluded that the optimum temperature was 1173 K.
Hama, Katsuhiro; Mizuno, Takashi; Sasao, Eiji; Iwatsuki, Teruki; Saegusa, Hiromitsu; Sato, Toshinori; Fujita, Tomoo; Sasamoto, Hiroshi; Matsuoka, Toshiyuki; Yokota, Hideharu; et al.
JAEA-Research 2015-007, 269 Pages, 2015/08
We have synthesised the research results from Mizunami/Horonobe URLs and geo-stability projects in the second mid-term research phase. It could be used as technical bases for NUMO/Regulator in each decision point from sitting to beginning of disposal (Principal Investigation to Detailed Investigation Phase). High quality construction techniques and field investigation methods have been developed and implemented and these will be directly applicable to the National Disposal Program (along with general assessments of hazardous natural events and processes). It will be crucial to acquire technical knowledge on decisions of partial backfilling and final closure by actual field experiments in Mizunami/Horonobe URLs as main themes for the next phases.
Jarrige, I.*; Ishii, Kenji; Matsumura, Daiju; Nishihata, Yasuo; Yoshida, Masahiro*; Kishi, Hirofumi*; Taniguchi, Masashi*; Uenishi, Mari*; Tanaka, Hirohisa*; Kasai, Hideaki*; et al.
ACS Catalysis, 5(2), p.1112 - 1118, 2015/02
Times Cited Count:16 Percentile:44.2(Chemistry, Physical)Tanaka, Toshiyuki*; Miyajima, Rikio*; Asai, Hideaki*; Horiuchi, Yasuharu; Kumada, Koji; Asai, Yasuhiro*; Ishii, Hiroshi*
Earth Planets and Space, 65(2), p.59 - 66, 2013/02
Times Cited Count:8 Percentile:23.85(Geosciences, Multidisciplinary)Shibata, Masahiro; Sawada, Atsushi; Tachi, Yukio; Makino, Hitoshi; Hayano, Akira; Mitsui, Seiichiro; Taniguchi, Naoki; Oda, Chie; Kitamura, Akira; Osawa, Hideaki; et al.
JAEA-Research 2012-032, 298 Pages, 2012/09
JAEA and NUMO have conducted a collaborative research work which is designed to enhance the methodology of repository design and performance assessment in preliminary investigation phase. The topics and the conducted research are follows; (1) Study on selection of host rock: in terms of hydraulic properties, items for assessing rock property, and assessment methodology of groundwater travel time has been organized with interaction from site investigation. (2) Study on development of scenario: the existing approach has been embodied, in addition, the phenomenological understanding regarding dissolution of and nuclide release from vitrified waste, corrosion of the overpack, long-term performance of the buffer are summarized. (3) Study on setting nuclide migration parameters: the approach for parameter setting has been improved for sorption and diffusion coefficient of buffer/rock, and applied and tested for parameter setting of key radionuclides. (4) Study on ensuring quality of knowledge: framework for ensuring quality of knowledge has been studied and examined aimed at the likely disposal facility condition.
Mikake, Shinichiro; Yamamoto, Masaru; Ikeda, Koki; Sugihara, Kozo; Takeuchi, Shinji; Hayano, Akira; Sato, Toshinori; Takeda, Shinichi; Ishii, Yoji; Ishida, Hideaki; et al.
JAEA-Technology 2010-026, 146 Pages, 2010/08
The Mizunami Underground Research Laboratory (MIU), one of the main facilities in Japan for research and development of the technology for high-level radioactive waste disposal, is under construction in Mizunami City. In planning the construction, it was necessary to get reliable information on the bedrock conditions, specifically the rock mass stability and hydrogeology. Therefore, borehole investigations were conducted before excavations started. The results indicated that large water inflow could be expected during the excavation around the Ventilation Shaft at GL-200m and GL-300m Access/Research Gallery. In order to reduce water inflow, pre-excavation grouting was conducted before excavation of shafts and research tunnels. Grouting is the injection of material such as cement into a rock mass to stabilize and seal the rock. This report describes the knowledge and lessons learned during the planning and conducting of pre-excavation grouting.
Iwamura, Takamichi; Okubo, Tsutomu; Akie, Hiroshi; Kugo, Teruhiko; Yonomoto, Taisuke; Kureta, Masatoshi; Ishikawa, Nobuyuki; Nagaya, Yasunobu; Araya, Fumimasa; Okajima, Shigeaki; et al.
JAERI-Research 2004-008, 383 Pages, 2004/06
The present report contains the achievement of "Research and Development on Reduced-Moderation Light Water Reactor with Passive Safety Features", which was performed by Japan Atomic Energy Research Institute (JAERI), Hitachi Ltd., Japan Atomic Power Company and Tokyo Institute of Technology in FY2000-2002 as the innovative and viable nuclear energy technology (IVNET) development project operated by the Institute of Applied Energy (IAE). In the present project, the reduced-moderation water reactor (RMWR) has been developed to ensure sustainable energy supply and to solve the recent problems of nuclear power and nuclear fuel cycle, such as economical competitiveness, effective use of plutonium and reduction of spent fuel storage. The RMWR can attain the favorable characteristics such as high burnup, long operation cycle, multiple recycling of plutonium (Pu) and effective utilization of uranium resources based on accumulated LWR technologies.
Mikake, Shinichiro; Yamamoto, Masaru; Ikeda, Koki; Kamia, Akira; Kinoshita, Harunobu; Ishida, Hideaki; Ishii, Yoji
no journal, ,
no abstracts in English
Asai, Hideaki; Matsui, Hiroya; Mikake, Shinichiro; Ito, Hiroaki; Horiuchi, Yasuharu; Ishii, Yoji
no journal, ,
The Mizunami Underground Research Laboratory (MIU) is currently being constructed by Japan Atomic Energy Agency. As part of MIU Project, development of engineering technology for deep underground intended for the crystalline rock is executed. The research to confirm the effectiveness of engineering technology is being executed during its excavation now. It reports on study results up to 300m in depth of engineering technology research and the schedule for the future.
Matsui, Hiroya; Mikake, Shinichiro; Asai, Hideaki; Ishii, Yoji; Horiuchi, Yasuharu; Kumada, Koji
no journal, ,
The Mizunami Underground Research Laboratory (MIU) of the Japan Atomic Energy Agency is a major site for geoscientific research to advance the scientific and technological basis for geological disposal of high-level radioactive waste in crystalline rock. Studies on relevant engineering technologies in the MIU consist of research on design and construction technology for very deep underground applications, and engineering technology as a basis of geological disposal. In the Second Phase of the MIU project, engineering studies have focused on research into design and construction technologies for deep underground. The main subjects in the study of very deep underground structures consist of the following: Demonstration of the design methodology, Demonstration of existing and supplementary excavation methods, Demonstration of countermeasures during excavation and Demonstration of safe construction. This poster show the main topics and results of the study until FY2009.
Wakui, Takashi; Ishii, Hideaki*; Naoe, Takashi; Suzuki, Hiroshi; Harjo, S.; Futakawa, Masatoshi
no journal, ,
In the diffused bonding by HIP of invar alloy with a low-thermal expansion coefficient and common metal, large residual stresses occurs near the bonding line due to difference with a big thermal expansion coefficient and then we are anxious about the strength reduction by the residual stresses. In this study, some tests for bonding specimen were carried out. The diffusion layer with thickness of 50 micro meter occurred near the bonding line. The neutron diffraction method could not measure the residual stress. In tensile tests, all fractures occurred in invar alloy side and the bonding strength was higher than the strength of Invar alloy. The grain size increased with an increase of treatment temperature and the tensile strength decreased with an increase of the grain size.
Wakui, Takashi; Ishii, Hideaki*; Naoe, Takashi; Wan, T.*; Xiong, Z.*; Haga, Katsuhiro; Takada, Hiroshi; Futakawa, Masatoshi
no journal, ,
no abstracts in English
Ishii, Hideaki*; Wakui, Takashi; Naoe, Takashi; Wan, T.; Xiong, Z.*; Haga, Katsuhiro; Takada, Hiroshi; Futakawa, Masatoshi
no journal, ,
no abstracts in English
Miyoshi, Yuta*; Kurita, Keisuke; Nagao, Yuto*; Yamaguchi, Mitsutaka*; Suzui, Nobuo*; Yin, Y.-G.*; Ishii, Satomi*; Kawachi, Naoki*; Hidaka, Kota*; Yoshida, Eiji*; et al.
no journal, ,
no abstracts in English
Miyoshi, Yuta*; Kurita, Keisuke; Nagao, Yuto*; Yamaguchi, Mitsutaka*; Suzui, Nobuo*; Yin, Y.-G.*; Ishii, Satomi*; Kawachi, Naoki*; Hidaka, Kota*; Yoshida, Eiji*; et al.
no journal, ,
no abstracts in English
Kurita, Keisuke; Miyoshi, Yuta*; Nagao, Yuto*; Yamaguchi, Mitsutaka*; Suzui, Nobuo*; Yin, Y.-G.*; Ishii, Satomi*; Kawachi, Naoki*; Hidaka, Kota*; Yoshida, Eiji*; et al.
no journal, ,
no abstracts in English