J-PARC LINAC 50 Hz operation verification study

Kondo, Yasuhiro; Chimura, Motoki; Cicek, E.*; Fukui, Yuji*; Futatsukawa, Kenta*; Fuwa, Yasuhiro; Goto, Rikuto*; Hirano, Koichiro; Ishikawa, Masaki*; Ito, Takashi; et al.

Proceedings of 22nd Annual Meeting of Particle Accelerator Society of Japan (Internet), p.124 - 129, 2026/03

https://www.pasj.jp/web_publish/pasj2025/proceedings/PDF/FRO6/FRO601.pdf

Various upgrade plans of the J-PARC linac are underway, and repetition-rate doubling project is one of the most important part. Currently, the linac supplies a 400~MeV H ion beam to the 3~GeV synchrotron (RCS) at a repetition rate of 25~Hz. However, to deliver the beam to both RCS and proton-beam irradiation facility under planning, it is necessary to raise the repetition rate from 25~Hz to 50~Hz. Prior to construction of the beamline to the irradiation facility, we conducted a verification of the 50~Hz operation of all the linac apparatus simultaneously within the current operational limits in May 2025. And also, the verification of the 50~Hz operation of the particle counter system, which is one of the most important safety device of the J-PARC accelerator, was conducted. As a result, any significant problems were not found out, and it is now ready for the upcoming 50~Hz-beam acceleration demonstration. This paper describes this details of the demonstration of the 50~Hz operation, without beam acceleration, of the J-PARC linac.

Crystal structure and cation distribution of the X-type hexaferrite SrCoFeO

Komabuchi, Mai*; Urushihara, Daisuke*; Asaka, Toru*; Fukuda, Koichiro*; Ohara, Takashi; Munakata, Koji*; Ishikawa, Yoshihisa*

Journal of the Physical Society of Japan, 89(3), p.034601_1 - 034601_5, 2020/03

https://doi.org/10.7566/JPSJ.89.034601

Conceptual design of multipurpose compact research reactor; Annual report FY2010 (Joint research)

Imaizumi, Tomomi; Miyauchi, Masaru; Ito, Masayasu; Watahiki, Shunsuke; Nagata, Hiroshi; Hanakawa, Hiroki; Naka, Michihiro; Kawamata, Kazuo; Yamaura, Takayuki; Ide, Hiroshi; et al.

JAEA-Technology 2011-031, 123 Pages, 2012/01

JAEA-Technology-2011-031.pdf:16.08MB

The number of research reactors in the world is decreasing because of their aging. However, the planning to introduce the nuclear power plants is increasing in Asian countries. In these Asian countries, the key issue is the human resource development for operation and management of nuclear power plants after constructed them, and also the necessity of research reactor, which is used for lifetime extension of LWRs, progress of the science and technology, expansion of industry use, human resources training and so on, is increasing. From above backgrounds, the Neutron Irradiation and Testing Reactor Center began to discuss basic concept of a multipurpose low-power research reactor for education and training, etc. This design study is expected to contribute not only to design tool improvement and human resources development in the Neutron Irradiation and Testing Reactor Center but also to maintain and upgrade the technology on research reactors in nuclear power-related companies. This report treats the activities of the working group from July 2010 to June 2011 on the multipurpose low-power research reactor in the Neutron Irradiation and Testing Reactor Center and nuclear power-related companies.

A computer control system for the PNC high power cw electron linac; Concept and hardware

Emoto, Takashi; Kato, Yuko*; Hirano, Koichiro; Ishikawa, Y.*; Takei, Hayanori; Nomura, Masahiro; Tani, Satoshi

PNC TN9410 98-060, 45 Pages, 1998/06

PNC-TN9410-98-060.pdf:1.17MB

Design and construction of a high power cw (Continuous Wave) electron linac for studying feasibility of nuclear waste transmutation was started in 1989 at PNC. The PNC accelerator (10Mev, 20mA average current, 4 ms pulse width, 50 Hz repetition) is dedicated machine for development of the high current acceleration technology in future need. The computer control system is responsible for accelerator control and supporting the experiment for high power operation. The feature of the system is the measurements of accelerator status simultaneously and modularity of software and hardware for easily implemented for modification or expansion. The high speed network (SCRAMNet15MB/s), Ethernet, and front end processors (Digital Signal Processor) were employed for the high speed data taking and control. The system was designed to be standard modules and software implemented man machine interface. Due to graphical-user-interface and object-oriented-programming, the software development environment is effortless programming and maintenance.