検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 47 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Changes in risk perceptions before and after nuclear accidents; Evidence from Japan

西川 雅史*; 加藤 尊秋*; 本間 俊充; 高原 省五

Environmental Science & Policy, 55(Part 1), p.11 - 19, 2016/01

 被引用回数:12 パーセンタイル:36.89(Environmental Sciences)

We quantitatively analyzed changes in residents' perceptions of the net benefits derived from the Kashiwazaki Kariwa Nuclear Power Station (KK) before and after the accident at the Fukushima Daiichi Plant (FD). From this analysis, we found that KK's perceived net benefits declined after the FD accident. This decline resulted from changes in respondents' relative weightings of KK's costs and benefits. We also found that residents living near nuclear facilities are more concerned about health risks from nuclear accidents than the likelihood of such accidents caused by human error. We suggest that a more effective policy entails changing people's relative weighting of nuclear facilities' costs and benefits by protecting lives through enhanced evacuation planning and post-disaster support for rehabilitation, although Japan's current nuclear power policy aims to assuage people's risk perceptions by reducing the probability of nuclear accidents to zero.

論文

Development of embedded Mach-Zehnder optical waveguide structures in polydimethylsiloxane thin films by proton beam writing

加田 渉*; 三浦 健太*; 加藤 聖*; 猿谷 良太*; 久保田 篤志*; 佐藤 隆博; 江夏 昌志; 石井 保行; 神谷 富裕; 西川 宏之*; et al.

Nuclear Instruments and Methods in Physics Research B, 348, p.218 - 222, 2015/04

 被引用回数:6 パーセンタイル:46.16(Instruments & Instrumentation)

The Mach-Zehnder (MZ) optical structures were previously fabricated in a Poly-methyl-methacrylate (PMMA) thin film by Proton Beam Writing (PBW). The enhancement of optical transmittance in the structures is, however, required for industrial use. In this study, the MZ optical waveguides have been fabricated in a poly-dimethyl-siloxane (PDMS) thin film which has the higher optical permeability. The PDMS films were spin-coated on a silicon wafer (40 $$times$$ 20 $$times$$ 0.5 mm$$^3$$) with a thickness of approximately 30 $$mu$$m. The MZ waveguides were drawn by a 750 keV proton microbeam of 1$$mu$$m in diameter having the penetration depth of 18 $$mu$$m with fluence of 40-100 nC/mm$$^2$$. The beam writing was carried out combining an electric scanner and a mechanical sample-stage. The observation of the single-mode light propagation of 1.55 $$mu$$m fiber-laser in the MZ waveguides indicated that the optical transmittance have been successfully enhanced using PDMS.

報告書

幌延深地層研究計画地下施設建設におけるプレグラウチングの注入実績データ集; 換気立坑のプレグラウチング結果

澤田 純之*; 中山 雅; 石川 誠

JAEA-Data/Code 2013-018, 25 Pages, 2013/12

JAEA-Data-Code-2013-018.pdf:3.18MB
JAEA-Data-Code-2013-018-appendix(CD-ROM).zip:105.32MB

幌延深地層研究計画は、原子力政策大綱に示された深地層の研究施設計画の一つであり、堆積岩を対象として、日本原子力研究開発機構が北海道幌延町で進めているプロジェクトである。幌延深地層研究計画 第II期工事の完成時には、3本の立坑(換気立坑、東立坑、西立坑)を3深度の水平坑道(140m水平坑道、250m水平坑道、350m水平坑道)で結んだ地下研究施設が建設される予定である。本研究施設の建設場所は、北海道幌延町の北進地区であり堆積軟岩が広がっている。また、地下施設の建設箇所は声問層と稚内層の地層境界部に位置している。地上からのボーリング調査結果より、建設箇所には湧水を伴う断層の存在が確認され、地下水から遊離するメタンガスの発生も確認されている。本施設の工事中における安全確保の観点、地下施設建設後の地下施設からの坑内湧水量を抑制する観点から、湧水抑制対策としてプレグラウチングを実施している。本データ集では、(1)グラウチングデータの共有化および散逸防止を図ること、(2)今後のプレグラウチングを実施するための基礎データとすることを目的として、本施設建設工事の中で湧水抑制対策として実施された、換気立坑のプレグラウチングに関するデータを取りまとめたものである。

論文

A Case study of economic incentives and local citizens' attitudes towards hosting a nuclear power plant in Japan; Impacts of the Fukushima accident

加藤 尊秋*; 高原 省五; 西川 雅史*; 本間 俊充

Energy Policy, 59, p.808 - 818, 2013/08

AA2012-0147.pdf:0.43MB

 被引用回数:26 パーセンタイル:78.46(Economics)

本研究では、2005年11月,2010年1月,2011年12月に東京電力柏崎刈羽原子力発電所の立地地域(柏崎市及び刈羽村)で行った社会調査をもとに、原子力発電所が地域にもたらす経済的・財政的利点や事故で被害を受ける不安感に関し地域住民の考え方の変化を探る。これらの調査は、同じ設問を含み、比較可能である。特に、東京電力福島第一原子力発電所の事故による影響に着目する。調査期間中、2007年7月には新潟県中越沖地震、2011年3月には東北地方太平洋沖地震が生じ、後者は福島第一原子力発電所の事故をもたらした。2011年調査では、2010年調査に比べ、各種の経済的・財政的利点の意義、またこれらの利点によって発電所が地域にもたらす問題点の埋め合わせが可能かという問いに関し、多くで否定的な回答が増えた。ただし、財政的利点の1人あたり規模が極めて大きい刈羽村では、その変化の程度は限定的であり、否定的な回答が増えた項目であっても2005年調査時の水準と大差がなかった(2010年調査では、2005年調査に比べて全体的に上記項目に肯定的な回答が増えていた)。

報告書

原子力分野の学術情報流通における研究開発報告書の役割

石川 正

JAEA-Review 2013-013, 51 Pages, 2013/06

JAEA-Review-2013-013.pdf:4.73MB

日本原子力研究開発機構(原子力機構)が刊行する研究開発報告書は、原子力機構の研究者が研究成果を学術論文として発表する場であり、原子炉,核融合装置,加速器などのプロジェクト型の研究成果を詳細に記録し、迅速に発信するために利用されてきた。日本における原子力研究開発の草創期からの成果を記録した研究開発報告書は2万件、インターネットのダウンロード数は年間470万件である。巨大装置の設計,建設,運転などの過程で得られた技術,経験などの技術情報も記録されているため知識管理に利用できる。また、国費による研究プロジェクトの成果のオープンアクセスや学術雑誌として発表した論文を電子化し提供する機関リポジトリにも利用できる。原子力分野における学術情報環境の変化の中で、研究開発報告書をプロジェクト型研究開発の学術情報基盤として活用することについて検討した。

論文

Visualization of focused proton beam dose distribution by atomic force microscopy using blended polymer films based on polyacrylic acid

大道 正明*; 高野 勝昌*; 佐藤 隆博; 神谷 富裕; 石井 保行; 大久保 猛; 江夏 昌志; 加田 渉; 杉本 雅樹; 西川 宏之*; et al.

Journal of Nanoscience and Nanotechnology, 12, p.7401 - 7404, 2012/09

 被引用回数:2 パーセンタイル:11.6(Chemistry, Multidisciplinary)

A new visualization method for dose distribution of a focused proton beam in sub-micrometer scale was developed using a formation of a bulky cross-linked structure of polyacrylic acid -$$N$$, $$N$$'-methylence bisacrylamide, blend film. The areas irradiated by the focused proton beam were swelled on the film. The height of the swelling was significantly increased according to the beam fluence and the increase of containing ratio of the methylence bisacrylamide. The height was saturated at the fluence of 5$$times$$10$$^5$$ ions/$$mu$$m$$^{2}$$. The proton beam-sensitive polymer film was used for the analysis of dose distribution on its surface. The irradiated surface was observed by employing an atomic force microscope. This observation result showed that the method could be used to confirm the writing patterns and the beam-spot shape. Nanostructures with a crescent shape are visualized clearly at a misaligned beam-spot shape in the set up of the beam-optics.

論文

Microprocessing of arched bridge structures with epoxy resin by proton beam writing

高野 勝昌*; 麻野 敦資*; 前吉 雄太*; 丸井 裕美*; 大道 正明*; 佐伯 昭紀*; 関 修平*; 佐藤 隆博; 石井 保行; 神谷 富裕; et al.

Journal of Photopolymer Science and Technology, 25(1), p.43 - 46, 2012/07

 被引用回数:2 パーセンタイル:6.61(Polymer Science)

The proton beam writing (PBW) with energy of several MeV ranges is a unique tool of three-dimensional microprocessing for a polymer material. Three-dimensional structures like a bridge structure can be fabricated by the double exposures of PBW with two deferent energies followed by the one-time development using etching solution. In this study, the fabrication of an arched bridge was attempted by means of the supercritical drying with liquid carbon dioxide to a SU-8 photoresist film, as the polymer material, coated on a substrate of epoxy sheet, after the PBW process. In the exposures, two patterns of bridge girders and piers were written with 0.5 and 3 MeV proton beams to the SU-8 photoresist films, respectively. After these writings, the photoresist films were developed with the solution of diacetone alcohol and rinsed with the solution of isopropyl alcohol. Then the supercritical drying with liquid carbon dioxide was used at 12 MPa, 40$$^{circ}$$C. As the results, the bridge structures with curved girders to the vertical direction were formed due to the swelling effect of the photoresist film on the drying. In the conference, the microprocessing method of the bridge structure and the swelling effect of the photoresist film will be represented in detail.

論文

Fabrication of concave and convex structure array consisted of epoxy long-nanowires by light and heavy ion beams lithography

高野 勝昌*; 杉本 雅樹; 麻野 敦資*; 前吉 雄太*; 丸井 裕美*; 大道 正明*; 佐伯 昭紀*; 関 修平*; 佐藤 隆博; 石井 保行; et al.

Transactions of the Materials Research Society of Japan, 37(2), p.237 - 240, 2012/06

A three dimensional microfabrication technique for polymer films has been investigated on the basis of fabricating micrometer structures composed of the fine wire structures which were fabricated by the chemical reaction induced along ion tracks of heavy ions with the energy of hundred MeV. In this study, we propose a new hemispherical microfabrication technique of epoxy resin for the fabrication of optical lenses using two times irradiation technique combining proton beam writing and low fluence irradiation of heavy ion beam. At first, an epoxy resin films composed of an etching and a non-etching layers of epoxy resin were irradiated at a frame pattern using a 3 MeV focused proton beam. At second, the low fluence irradiation of 450 MeV $$^{129}$$Xe$$^{23+}$$ was performed by a raster line scanning with oblique angle of 45 degree. Finally, the non-irradiated area of the etching layer of the films were etched by the developer. The observation of the etched films showed that the dome-like structures arrayed with a grid were formed on the non-etching layer of the epoxy resin films. The more detailed observation showed that each dome was composed of the fine wire structures formed by cross-linking reactions induced along the $$^{129}$$Xe$$^{23+}$$ tracks. The domes are expected to function as optical condenser-lenses.

論文

Fabrication of poly(9,9'-dioctylfluorene)-based nano- and microstructures by proton beam writing

前吉 雄太*; 高野 勝昌*; 麻野 敦資*; 丸井 裕美*; 大道 正明*; 佐藤 隆博; 神谷 富裕; 石井 保行; 大久保 猛; 江夏 昌志; et al.

Japanese Journal of Applied Physics, 51(4R), p.045201_1 - 045201_4, 2012/04

 被引用回数:1 パーセンタイル:4.44(Physics, Applied)

A relation between the fluence and the beam-induced chemical reaction in poly(9,9'-dioctylfluorene), PFO, films has been investigated to fabricate PFO-based nano-micro structures using Proton Beam Writing, PBW. In this investigation, we observed that the cross-linking reaction in PFO occurred without a cross-linking agent using PBW. Furthermore, not only the surface morphology but also structure and shape on PFO films were changed from nano-meter to micro-meter size by controlling the fluence of proton beam irradiation on the basis of the investigation. Consequently, the structure of the arabic numbers was successful fabricated as three-dimensional PFO structures with the aspect ratio of 12 at the fluence of 3.5 $$times$$ 10$$^6$$ ions/$$mu$$m$$^2$$ by PBW.

論文

Sulfate complexation of element 104, Rf, in H$$_{2}$$SO$$_{4}$$/HNO$$_{3}$$ mixed solution

Li, Z.*; 豊嶋 厚史; 浅井 雅人; 塚田 和明; 佐藤 哲也; 佐藤 望; 菊池 貴宏; 永目 諭一郎; Sch$"a$del, M.; Pershina, V.*; et al.

Radiochimica Acta, 100(3), p.157 - 164, 2012/03

 被引用回数:12 パーセンタイル:69.15(Chemistry, Inorganic & Nuclear)

The cation-exchange behavior of $$^{261}$$Rf ($$T_{1/2}$$ = 78 s) produced in the $$^{248}$$Cm($$^{18}$$O, 5$$n$$) reaction was studied on a one-atom-at-a-time scale in 0.15-0.69 M H$$_{2}$$SO$$_{4}$$/HNO$$_{3}$$ mixed solutions ([H$$^{+}$$] = 1.0 M) using an automated ion-exchange separation apparatus coupled with the detection system for alpha-spectroscopy (AIDA). It was found that adsorption probabilities ($$%$$ads) of $$^{261}$$Rf on cation-exchange resin decrease with an increase of [HSO$$_{4}$$$$^{-}$$], showing a successive formation of Rf sulfate complexes. Rf exhibits a weaker complex formation tendency compared to the lighter homologues Zr and Hf. This is in good agreement with theoretical predictions including relativistic effects.

論文

3D micro-fabrication utilized superimposing technique with focused MeV ion beams

高野 勝昌*; 佐藤 隆博; 神谷 富裕; 石井 保行; 大久保 猛; 江夏 昌志; 加田 渉; 杉本 雅樹; 関 修平*; 西川 宏之*

JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 162, 2012/01

A unique micro-processing technique for epoxy resin films has been developed at the TIARA, utilizing the ion beam writing with multiple energies of light and heavy ion beams. In this study, nano-wire structure fabrication was tried by a superimposing with the proton beams and 520 MeV $$^{40}$$Ar$$^{14+}$$. And in order to reduce the surface tension in developing and drying processes, after a baking at 95 $$^{circ}$$C for 1 minute, developing and drying was performed with super-critical CO$$_{2}$$ at 12 MPa, 40 $$^{circ}$$C. As the result, the bridge structure which strung the wires fabricated by 520 MeV $$^{40}$$Ar$$^{14+}$$ hitting can be observed at the aimed points.

論文

Fabrication of polymer optical waveguides for the 1.5-$$mu$$m band using focused proton beam

三浦 健太*; 町田 裕貴*; 上原 政人*; 桐生 弘武*; 小澤 優介*; 佐々木 友之*; 花泉 修*; 佐藤 隆博; 石井 保行; 江夏 昌志; et al.

Key Engineering Materials, 497, p.147 - 150, 2012/00

 被引用回数:7 パーセンタイル:95.17

Proton beam writing (PBW) is an attractive technique for next-generation micro-fabrication. We study the fabrication of optical waveguides of polymer materials using PBW. In this study, the optical waveguides of photorefractive polysilane "GLASSIA" was fabricated. The samples for the waveguides were prepared as follows; (1) An under-cladding layer of SiO$$_2$$ having a thickness of $$sim$$15 $$mu$$m was deposited on a Si substrate using radio-frequency sputtering. (2) A polysilane layer having a thickness of $$sim$$10 $$mu$$m was spin-coated onto the SiO$$_2$$ layer as a core layer. Optical waveguides were drawn by scanning a 1.7 MeV focused proton beam with $$sim$$1 $$mu$$m size and beam current of 50 pA which was produced by a submicron focused ion beam system connected with the 3 MV single-ended accelerator at JAEA. The drawing was carried out on the dose of 100, 200, 300 nC/mm$$^2$$ each. After the drawing, the sample surfaces were observed using an optical microscope and AFM. The observation result showed that the refractive index was changed and the cores of the waveguides were formed. We will report the details of above observation results in the conference. The change ratio of the refraction index will also be reported on the basis of the obtained result by inserting light ($$lambda$$ = 1.55 $$mu$$m) into the waveguide structure through a single-mode fiber.

論文

Fabrication of polymer optical waveguides for the 1.5-$$mu$$m band using focused proton beam

三浦 健太*; 町田 裕貴*; 上原 政人*; 桐生 弘武*; 小澤 優介*; 佐々木 友之*; 花泉 修*; 佐藤 隆博; 石井 保行; 江夏 昌志; et al.

Key Engineering Materials, 497, p.147 - 150, 2011/12

 被引用回数:6 パーセンタイル:2.48

Single mode straight waveguides for a wavelength of 1.55-$$mu$$m were, so far, fabricated using a proton beam writing (PBW) technique. We report the fabrication of Y-junction polymer waveguides with a polymethyl methacralate (PMMA) layers as the expansion of these straight waveguides using PBW in the conference. The PMMA layers consisted of an under-cladding layer of SiO$$_2$$ having a thickness of $$sim$$ 15-$$mu$$m deposited on an Si substrate, a PMMA layer having a thickness of $$sim$$ 10-$$mu$$m spin-coated onto the SiO$$_2$$ layer and a Y-junction waveguide with a width of 8-$$mu$$m in a PMMA core layer. The Y-junction waveguides with the angle of 2$$^{circ}$$ were drawn using the 1.7 MeV proton beam with 1-$$mu$$m in diameter and a beam current of 10 pA for a dose of 100 nC/mm$$^2$$. After spin-coating the PMMA layer with $$sim$$ 10-$$mu$$m thickness as an upper cladding on the irradiated PMMA layer, the near field pattern (NFP) of an 8-$$mu$$m-width Y-junction waveguide was observed using a tunable-wavelength laser. The observation showed that the fabrication of waveguide was succeeded because its waveguide was single mode and the intensity ratio between the two outputted lights was the almost same; 1:0.96. We also briefly report the next plans of the measurement of the refractive indices of proton-irradiated PMMA and SiO$$_2$$ films and the fabrication of a thermo-optic polymer switch based on a Mach-Zehnder interferometer waveguide.

論文

Nano-micro processing of epoxy resin systems by ion beam lithography with multiple energies and species

高野 勝昌; 佐藤 隆博; 石井 保行; 江夏 昌志; 神谷 富裕; 大久保 猛; 杉本 雅樹; 西川 宏之*; 関 修平*

Transactions of the Materials Research Society of Japan, 36(3), p.305 - 308, 2011/09

Techniques of superimposed ion beam writing with different energies and species have been developed with targeting system at Takasaki Ion Accelerators for Advanced Radiation Application facility, TIARA, of JAEA/Takasaki. A bridge structure was fabricated by the superimposed writing of a girder pattern with 0.5 MeV proton beam adjusting to the bridge pier pattern written with 3 MeV proton beam, using SU-8 photoresist films coated on curing epoxy resin sheets. An upstanding column array with the diameter of sub-micron supported by the bridge structure was fabricated by the spot writing of 260 MeV Ne$$^{7+}$$ single ion hit adjusting to the girder pattern written with the 0.5 MeV proton beams.

論文

電子ジャーナル利用ニーズの実態について; 日本原子力研究開発機構の調査から

深澤 剛靖; 中嶋 英充; 石川 正

情報の科学と技術, 58(6), p.301 - 305, 2008/06

日本原子力研究開発機構(原子力機構)は、エルゼビア社の協力を得て、サイエンスダイレクトを利用した電子ジャーナルの利用調査を実施した。調査結果は原子力機構の研究開発成果報告書JAEA-Review-2008-021として刊行されている。本稿は、調査結果の概要と調査結果からみた海外学術雑誌の選定に関する考察を報告するものである。

報告書

日本原子力研究開発機構における電子ジャーナル利用調査

石川 正; 深澤 剛靖

JAEA-Review 2008-021, 50 Pages, 2008/05

JAEA-Review-2008-021.pdf:2.3MB

日本原子力研究開発機構における研究者の学術雑誌に対するニーズを定量的に明らかにするため、平成18年に1年間にわたってエルゼビア社発行の電子ジャーナル1,783誌を利用して、ダウンロード数などのデータを収集し調査した。研究者は自然科学から社会科学まで広い分野に渡る雑誌を利用したが、年間総ダウンロード数の80%は102誌の雑誌(本稿では「コアジャーナル」という)に集中していることがわかった。この事実から研究者のニーズを充足するためには、利用データに基づいてコアジャーナルを的確に選定することが費用対効果の観点から重要であることが確認できた。

論文

Microdosimetric study for secondary neutrons in phantom produced by a 290 MeV/nucleon carbon beam

遠藤 暁*; 田中 憲一*; 高田 真志*; 鬼塚 昌彦*; 宮原 信幸*; 佐藤 達彦; 石川 正義*; 前田 直子*; 早渕 直文*; 静間 清*; et al.

Medical Physics, 34(9), p.3571 - 3578, 2007/09

 被引用回数:7 パーセンタイル:26.01(Radiology, Nuclear Medicine & Medical Imaging)

重粒子線治療における線量評価において、荷電粒子による被ばく線量は精度よく測定されているが、2次中性子による被ばく線量を測定した例はほとんどない。したがって、本研究では、290MeV/nの炭素ビームをアクリルファントムに照射したときの2次中性子線量分布をTEPCを用いて測定した。その結果、重粒子線治療における中性子被ばく線量の寄与はそれほど大きくないことがわかった。また、測定値を粒子輸送計算コードPHITSによるシミュレーション結果と比較したところ、比較的よい一致が得られた。

報告書

発表論文にみる研究所図書館の活動; 日本原子力研究所図書館の場合

池田 貴儀; 羽原 正; 石川 正; 板橋 慶造; 米澤 稔

JAEA-Review 2007-024, 51 Pages, 2007/03

JAEA-Review-2007-024.pdf:2.57MB

日本原子力研究所図書館の半世紀に渡る図書館活動で312件の論文が生産された。これらの論文の一覧リストを作成するとともに、「総論」,「図書館機能」,「研究成果の取りまとめと普及」及び「国際情報流通」に区分し解説した。併せて主題索引,著者索引及び年表を取りまとめた。

論文

High-resolution photoemission study of the hybridization gap in the Kondo semiconductor CeRhAs

島田 賢也*; 東口 光晴*; 有田 将司*; 生天目 博文*; 谷口 雅樹*; 藤森 伸一; 斎藤 祐児; 藤森 淳; 高田 恭孝*; Shin, S.*; et al.

Journal of Magnetism and Magnetic Materials, 310(2, Part1), p.e57 - e58, 2007/03

近藤半導体CeRhAs及び半金属CeRhSbの電子状態を、40-5948eVの放射光を利用した光電子分光により調べた。光励起断面積のエネルギー依存性に基づき、これらの物質のp-d-f状態を明らかにした。

論文

科学技術図書館の現在と未来; 日本原子力研究所図書館の現場から

仲本 秀四郎*; 板橋 慶造; 石川 正; 米澤 稔; 羽原 正

科学技術図書館の現在と未来; 日本原子力研究所図書館の現場から, 185 Pages, 2007/03

専門図書館の現状と将来に関して、日本原子力研究所図書館という一図書館の現場から紹介する。本図書館は、原子力という比較的新しいビッグサイエンスを専門領域とし、研究所に付属し、その研究所は国策として建てられた国内最大級の研究組織で、地理的にも東京の東北120kmにある。置かれた立場と経緯から、国内原子力情報センターとしての活動を課せられて、図書資料の収集・保管・提供という図書館機能に加え情報発信機能を合わせて運営されており、国際協力の情報活動の役割も担っている。創設以来50年、図書館がいかに変貌したかについては、それなりの理由と環境があり、その経緯の説明を試みる。さらに、専門図書館の進むべき姿を模索する試みの一つとして、現在図書館が新たに取り組んでいる業務あるいは関連機関に進められているプロジェクトの一端を紹介する。

47 件中 1件目~20件目を表示