Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Mizuno, Rurie*; Niikura, Megumi*; Saito, Takeshi*; Matsuzaki, Teiichiro*; Sakurai, Hiroyoshi*; Amato, A.*; Asari, Shunsuke*; Biswas, S.*; Chiu, I.-H. ; Gianluca, J.*; et al.
Nuclear Instruments and Methods in Physics Research A, 1060, p.169029_1 - 169029_14, 2024/03
Times Cited Count：0 Percentile：0.02(Instruments & Instrumentation)
isomers in 
CfOrlandi, R.; Makii, Hiroyuki; Nishio, Katsuhisa; Hirose, Kentaro; Asai, Masato; Tsukada, Kazuaki; Sato, Tetsuya; Ito, Yuta; Suzaki, Fumi; Nagame, Yuichiro*; et al.
Physical Review C, 106(6), p.064301_1 - 064301_11, 2022/12
Times Cited Count：1 Percentile：33.4(Physics, Nuclear)Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
C control rods in Fukushima Daiichi nuclear reactors during meltdown; B-Li isotopic signatures in cesium-rich microparticlesFueda, Kazuki*; Takami, Ryu*; Minomo, Kenta*; Morooka, Kazuya*; Horie, Kenji*; Takehara, Mami*; Yamasaki, Shinya*; Saito, Takumi*; Shiotsu, Hiroyuki; Onuki, Toshihiko*; et al.
Journal of Hazardous Materials, 428, p.128214_1 - 128214_10, 2022/04
Times Cited Count：6 Percentile：68.71(Engineering, Environmental)Torikawa, Tomoaki*; Odaira, Naoya*; Ito, Daisuke*; Ito, Kei*; Saito, Yasushi*; Matsushita, Kentaro; Ezure, Toshiki; Tanaka, Masaaki
Konsoryu, 36(1), p.63 - 69, 2022/03
On free surface of a sodium cooled fast reactor, gas entrainment can be caused by free surface vortices, which may result in disturbance in core power. It is important to develop an evaluation model to predict accurately entrained gas flow rate. In this study, entrained gas flow rate a simple gas entrainment experiment is conducted with focusing on effect of pressure difference between upper and lower tanks. Pressure difference between upper and lower tanks are controlled by changing gas pressure in lower tank. As a result, it is confirmed that the entrained gas flow rate increases with increasing pressure difference between upper and lower tanks. By visualization of swirling annular flow in suction pipe, it is also observed that pressure drop in suction pipe increases with increase in entrained gas flow rate, which implies that entrained gas flow rate can be predicted by evaluation model based on pressure drop in swirling annular flow region.
Fe(n,
)
Fe cross section from the surrogate ratio method and its effect on the Fe nucleosynthesisYan, S. Q.*; Li, X. Y.*; Nishio, Katsuhisa; Lugaro, M.*; Li, Z. H.*; Makii, Hiroyuki; Pignatari, M.*; Wang, Y. B.*; Orlandi, R.; Hirose, Kentaro; et al.
Astrophysical Journal, 919(2), p.84_1 - 84_7, 2021/10
Times Cited Count：1 Percentile：8.87(Astronomy & Astrophysics)
Chiera, N. M.*; Sato, Tetsuya; Eichler, R.*; Tomitsuka, Tomohiro; Asai, Masato; Adachi, Sadia*; Dressler, R.*; Hirose, Kentaro; Inoue, Hiroki*; Ito, Yuta; et al.
Angewandte Chemie; International Edition, 60(33), p.17871 - 17874, 2021/08
Times Cited Count：2 Percentile：14.88(Chemistry, Multidisciplinary)The formation and the chemical characterization of single atoms of dubnium (Db, element 105), in the form of its volatile oxychloride, was investigated using the on-line gas phase chromatography technique, in the temperature range 350 - 600 
C. Under the exact same chemical conditions, comparative studies with the lighter homologs of group-5 in the Periodic Table clearly indicate the volatility sequence being NbOCl
TaOCl
DbOCl. From the obtained experimental results, thermochemical data for DbOCl were derived. The present study delivers reliable experimental information for theoretical calculations on the chemical properties of transactinides.
Suzuki, Shintaro*; Takubo, Ko*; Kuga, Kentaro*; Higemoto, Wataru; Ito, Takashi; Tomita, Takahiro*; Shimura, Yasumichi*; Matsumoto, Yosuke*; Bareille, C.*; Wadachi, Hiroki*; et al.
Physical Review Research (Internet), 3(2), p.023140_1 - 023140_12, 2021/05
We report our experimental discovery of the transition temperature reaching 20 K in a Yb-based compound at ambient pressure. The Mn substitution at the Al site in an intermediate valence state of 
-YbAlB
not only induces antiferromagnetic transition at a record high temperature of 20 K but also transforms the heavy-fermion liquid state in -YbAlB into a highly resistive metallic state proximate to a Kondo insulator.
Yoshida, Shogo*; Koyama, Takehide*; Yamada, Haruhiko*; Nakai, Yusuke*; Ueda, Koichi*; Mito, Takeshi*; Kitagawa, Kentaro*; Haga, Yoshinori
Physical Review B, 103(15), p.155153_1 - 155153_5, 2021/04
Times Cited Count：1 Percentile：0(Materials Science, Multidisciplinary)Yamanaka, Kenta*; Kuroda, Asumi*; Ito, Miyu*; Mori, Manami*; Bian, H.*; Shobu, Takahisa; Sato, Shigeo*; Chiba, Akihiko*
Additive Manufacturing, 37, p.101678_1 - 101678_12, 2021/01
Times Cited Count：23 Percentile：86.72(Engineering, Manufacturing)
TeShikin, A. M.*; Estyunin, D. A.*; Klimovskikh, I. I.*; Filnov, S. O.*; Kumar, S.*; Schwier, E. F.*; Miyamoto, Koji*; Okuda, Taichi*; Kimura, Akio*; Kuroda, Kenta*; et al.
Scientific Reports (Internet), 10, p.13226_1 - 13226_13, 2020/08
Times Cited Count：59 Percentile：96.43(Multidisciplinary Sciences)Miyakawa, Susumu*; Ito, Toshimasa*; Iwahori, Keisuke*; Aoyama, Yoshihiko*; Kubo, Ryosuke*; Murata, Shinji*; Shobu, Takahisa; Shiro, Ayumi*; Kajiwara, Kentaro*
Zairyo, 69(4), p.308 - 314, 2020/04
White etching area which looks white with nital corrosive liquid may be recognized at the flaking part of a rolling bearing on which high contact stress of several GPa is applied repeatedly. Up to now, studies of white etching area of a ball have been less than studies of white etching area of inner and outer rings. In this study, as part of the flaking mechanism explication with white etching area of a ball, internal residual stress distributions of ball by using high energy white X-ray of SPring-8 (A method) and laboratorial X-ray measurement equipment (B method) were investigated. The former was modified by surface residual stress according to B method. The latter was modified by releasing stress in the form of electrolytic polishing. The results showed modified residual stress distributions almost agree qualitatively.
Sue, Yuki*; Yotsuzuka, Mai*; Futatsukawa, Kenta*; Hasegawa, Kazuo; Iijima, Toru*; Iinuma, Hiromi*; Inami, Kenji*; Ishida, Katsuhiko*; Kawamura, Naritoshi*; Kitamura, Ryo; et al.
Physical Review Accelerators and Beams (Internet), 23(2), p.022804_1 - 022804_7, 2020/02
Times Cited Count：2 Percentile：25.94(Physics, Nuclear)A destructive monitor to measure the longitudinal bunch width of a low-energy and low-intensity muon beam was developed. This bunch-width monitor (BWM) employed microchannel plates to detect a single muon with high time resolution. In addition, constant-fraction discriminators were adopted to suppress the time-walk effect. The time resolution was measured to be 65 ps in rms using a picosecond-pulsed laser. This resolution satisfied the requirements of the muon linac of the J-PARC E34 experiment. We measured the bunch width of negative-muonium ions accelerated with a radio-frequency quadrupole using the BWM. The bunch width was successfully measured to be 
54 
11 ns, which is consistent with the simulation.
and 3
two-proton states in 
Po
populated by two-proton transferDupont, E.*; Astier, A.*; Petrache, C. M.*; Lv, B. F.*; Deloncle, I.*; Kiener, J.*; Orlandi, R.; Makii, Hiroyuki; Nishio, Katsuhisa; Hirose, Kentaro; et al.
Physical Review C, 101(1), p.014309_1 - 014309_6, 2020/01
Times Cited Count：1 Percentile：13.56(Physics, Nuclear)Kondo, Yasuhiro; Hirano, Koichiro; Ito, Takashi; Kikuzawa, Nobuhiro; Kitamura, Ryo; Morishita, Takatoshi; Oguri, Hidetomo; Okoshi, Kiyonori; Shinozaki, Shinichi; Shinto, Katsuhiro; et al.
Journal of Physics; Conference Series, 1350, p.012077_1 - 012077_7, 2019/12
Times Cited Count：1 Percentile：52.28(Physics, Particles & Fields)We have upgraded a 3-MeV linac at J-PARC. The ion source is same as the J-PARC linac's, and the old 30-mA RFQ is replaced by a spare 50-mA RFQ, therefore, the beam energy is 3 MeV and the nominal beam current is 50 mA. The main purpose of this system is to test the spare RFQ, but also used for testing of various components required in order to keep the stable operation of the J-PARC accelerator. The accelerator has been already commissioned, and measurement programs have been started. In this paper, present status of this 3-MeV linac is presented.
Otani, Masashi*; Fukao, Yoshinori*; Futatsukawa, Kenta*; Kawamura, Naritoshi*; Matoba, Shiro*; Mibe, Tsutomu*; Miyake, Yasuhiro*; Shimomura, Koichiro*; Yamazaki, Takayuki*; Hasegawa, Kazuo; et al.
Journal of Physics; Conference Series, 1350, p.012067_1 - 012067_6, 2019/12
Times Cited Count：2 Percentile：73.22(Physics, Particles & Fields)Negative muonium atom (
ee, Mu) has unique features stimulating potential interesting for several scientific fields. Since its discovery in late 1980's in vacuum, it has been discussed that the production efficiency would be improved using a low-work function material. C12A7 was a well-known insulator as a constituent of alumina cement, but was recently confirmed to exhibit electric conductivity by electron doping. The C12A7 electride has relatively low-work function (2.9 eV). In this paper, the negative muonium production measurement with several materials including a C12A7 electride film will be presented. Measured production rate of the Mu were 10
/s for all the Al, electride, and SUS target. Significant enhancement on electride target was not observed, thus it is presumed that the surface condition should be more carefully treated. There was no material dependence of the Mu averaged energy: it was 0.20.1keV.
Otani, Masashi*; Futatsukawa, Kenta*; Mibe, Tsutomu*; Naito, Fujio*; Hasegawa, Kazuo; Ito, Takashi; Kitamura, Ryo; Kondo, Yasuhiro; Morishita, Takatoshi; Iinuma, Hiromi*; et al.
Journal of Physics; Conference Series, 1350, p.012097_1 - 012097_7, 2019/12
Times Cited Count：2 Percentile：73.22(Physics, Particles & Fields)A disk and washer (DAW) coupled cavity linac (CCL) has been developed for a middle velocity part in a muon linac to measure muon anomalous magnetic moment and search for electric dipole moment. I will accelerate muons from 
= 
= 0.3 to 0.7 at an operational frequency of 1.3GHz. In this poster, the cavity design, beam dynamics design, and the cold-model measurements will be presented.
Ito, Kei*; Ito, Daisuke*; Saito, Yasushi*; Ezure, Toshiki; Matsushita, Kentaro; Tanaka, Masaaki; Imai, Yasutomo*
Proceedings of 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-18) (USB Flash Drive), p.6632 - 6642, 2019/08
In this paper, a mechanistic model is proposed to calculate the entrained gas flow rate by a free surface vortex. The model contains the theoretical equation of transient gas core elongation and the empirical equation of critical gas core length for gas bubble detachment. Based on those two equations, the entrained gas flow rate is calculated as the portion of the gas core elongated beyond the critical gas core length per unit time. Then, the mechanistic model was applied to the calculation of the entrained gas flow rate in a simple water experiment. As a result, it is confirmed that the entrained gas flow rate grows rapidly when the liquid (water) flow rate, which determine the strength of a free surface vortex, exceeds a certain threshold value.
Sue, Yuki*; Iijima, Toru*; Inami, Kenji*; Yotsuzuka, Mai*; Iinuma, Hiromi*; Nakazawa, Yuga*; Otani, Masashi*; Kawamura, Naritoshi*; Shimomura, Koichiro*; Futatsukawa, Kenta*; et al.
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.55 - 60, 2019/07
The result of bunch size measurement of muon accelerated by RFQ up to 89 keV is presented in this paper. A four-stage muon linac for precise measurement of muon property is under construction in the J-PARC. The demonstration of the first muon RF acceleration with an RFQ linac was conducted and the transverse profile of the accelerated muons was measured in 2017. As one of the remaining issues for the beam diagnostic system, the longitudinal beam profile after the RFQ should be measured to match the profile to the designed acceptance of the subsequent accelerator. For this purpose, the new longitudinal beam monitor using the microchannel plate is under development. The time resolution of the monitor aims to be around 30 to 40 ps corresponding to 1% of a period of an operating frequency of the accelerator, which is 324 MHz. On November 2018, the bunch size of accelerated negative muonium ion of 89 keV with the RFQ was measured using this monitor at the J-PARC MLF. The measured bunch width is 
ns, which is consistent with the simulation.
Yotsuzuka, Mai*; Iijima, Toru*; Iinuma, Hiromi*; Inami, Kenji*; Otani, Masashi*; Kawamura, Naritoshi*; Kitamura, Ryo; Kondo, Yasuhiro; Saito, Naohito; Shimomura, Koichiro*; et al.
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.814 - 817, 2019/07
The J-PARC E34 experiment aims to measure the muon anomalous magnetic moment and the electric dipole moment with a high precision. In this experiment, thermal muonium is produced and ionized by laser resonance to generate ultra-slow muons, which are then accelerated in a multistage muon linac. In order to satisfy the experimental requirements, suppression of the emittance growth during the acceleration is necessary. Because the main cause of the emittance growth is beam mismatching between the accelerating stages, the transverse and longitudinal beam monitoring is important. The longitudinal beam monitor has to measure the bunch length with the resolution equivalent to tens of picoseconds, which is 1% of the acceleration phase of 324 MHz. In addition, it should be sensitive to single muon because the beam intensity is limited during the commissioning phase. To realize above requirements, we are developing a longitudinal beam monitor with a micro channel plate, and the test bench to evaluate the monitor performance. So far, the time resolution of the beam monitor was obtained to be 65 ps in RMS including the jitter on the test bench. We also succeeded in measuring the longitudinal bunch size of the muon beam accelerated by RFQ using the beam monitor. In this paper, the results of the performance evaluation for this beam monitor are reported.
