Pulsed muon facility of J-PARC MUSE

Shimomura, Koichiro*; Koda, Akihiro*; Pant, A. D.*; Sunagawa, Hikaru*; Fujimori, Hiroshi*; Umegaki, Izumi*; Nakamura, Jumpei*; Fujihara, Masayoshi; Tampo, Motonobu*; Kawamura, Naritoshi*; et al.

Interactions (Internet), 245(1), p.31_1 - 31_6, 2024/12

https://doi.org/10.1007/s10751-024-01863-8

Intruder configurations in Ne at the transition into the island of inversion; Detailed structure study of Ne

Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.

Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08

https://doi.org/10.1016/j.physletb.2023.138038

Detailed -ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.

Evaluation of tensile and creep properties on 9Cr-ODS steel claddings

Yano, Yasuhide; Hashidate, Ryuta; Tanno, Takashi; Imagawa, Yuya; Kato, Shoichi; Onizawa, Takashi; Ito, Chikara; Uwaba, Tomoyuki; Otsuka, Satoshi; Kaito, Takeji

JAEA-Data/Code 2021-015, 64 Pages, 2022/01

JAEA-Data-Code-2021-015.pdf:2.6MB

From a view point of practical application of fast breeder reactor cycles, which takes advantage of safety and economic efficiency and makes a contribution of volume reduction and mitigation of degree of harmfulness of high-level radioactive waste, it is necessary to develop fuel cladding materials for fast reactors (FRs) in order to achieve high-burnup. Oxide dispersion strengthened (ODS) steel have been studied for use as potential fuel cladding materials in FRs owing to their excellent resistance to swelling and their high-temperature strength in Japan Atomic Energy Agency. It is very important to establish the materials strength standard in order to apply ODS steels as a fuel cladding. Therefore, it is necessary to acquire the mechanical properties such as tensile, creep rupture strength tests and so on. In this study, tensile and creep rupture strengths of 9Cr-ODS steel claddings were evaluated using by acquired these data. Because of the phase transformation temperature of 9Cr-ODS steel, temperature range for the evaluation was divided into two ones at AC1 transformation temperature of 850C.

Rabi-oscillation spectroscopy of the hyperfine structure of muonium atoms

Nishimura, Shoichiro*; Torii, Hiroyuki*; Fukao, Yoshinori*; Ito, Takashi; Iwasaki, Masahiko*; Kanda, Sotaro*; Kawagoe, Kiyotomo*; Kawall, D.*; Kawamura, Naritoshi*; Kurosawa, Noriyuki*; et al.

Physical Review A, 104(2), p.L020801_1 - L020801_6, 2021/08

https://doi.org/10.1103/PhysRevA.104.L020801

Development of ODS tempered martensitic steel for high burn up fuel cladding tube of SFR

Otsuka, Satoshi; Tanno, Takashi; Oka, Hiroshi; Yano, Yasuhide; Tachi, Yoshiaki; Kaito, Takeji; Hashidate, Ryuta; Kato, Shoichi; Furukawa, Tomohiro; Ito, Chikara; et al.

2018 GIF Symposium Proceedings (Internet), p.305 - 314, 2020/05

Oxide Dispersion Strengthened (ODS) steel has been developed worldwide as a high-strength and radiation-tolerant steel used for advanced nuclear system. Japan Atomic Energy Agency (JAEA) has been developing ODS steel as the primary candidate material of Sodium cooled Fast Reactor (SFR) high burn-up fuel cladding tube. Application of high burn-up fuel to SFR core can contribute to improvement of economical performance of SFR in conjunction with volume and hazardousness reduction of radioactive waste. This paper described the current status and future prospects of ODS tempered martensitic steel development in JAEA for SFR fuel application.

Ultra-high temperature creep rupture and transient burst strength of ODS steel claddings

Yano, Yasuhide; Sekio, Yoshihiro; Tanno, Takashi; Kato, Shoichi; Inoue, Toshihiko; Oka, Hiroshi; Otsuka, Satoshi; Furukawa, Tomohiro; Uwaba, Tomoyuki; Kaito, Takeji; et al.

Journal of Nuclear Materials, 516, p.347 - 353, 2019/04

https://doi.org/10.1016/j.jnucmat.2019.01.052

9Cr-ODS steel claddings consisting of tempered martensitic matrix, showed prominent creep rupture strength at 1000 C, which surpassed that of heat-resistant austenitic steels although creep rupture strength of tempered martensitic steels is generally lower than that of austenitic steels at high temperatures. The measured creep rupture strength of 9Cr-ODS steel claddings at 1000 C was higher than that from extrapolated creep rupture trend curves formulated using data at temperatures from 650 to 850 C. This superior strength seemed to be owing to transformation of the matrix from the -phase to the -phase. The transient burst strengths for 9Cr-ODS steel were much higher than those for 11Cr-ferritic/martensitic steel (PNC-FMS). Cumulative damage fraction analyses suggested that the life fraction rule can be used for the rupture life prediction of 9Cr-ODS steel and PNC-FMS claddings in the transient and accidental events with a certain accuracy.

Model calculation of Cr dissolution behavior of ODS ferritic steel in high-temperature flowing sodium environment

Otsuka, Satoshi; Tanno, Takashi; Oka, Hiroshi; Yano, Yasuhide; Kato, Shoichi; Furukawa, Tomohiro; Kaito, Takeji

Journal of Nuclear Materials, 505, p.44 - 53, 2018/07

AA2017-0603.pdf:1.7MB

https://doi.org/10.1016/j.jnucmat.2018.03.054

A calculation model was constructed to systematically study the effects of environmental conditions (i.e. Cr concentration in sodium, test temperature, axial temperature gradient of fuel pin, and sodium flow velocity) on Cr dissolution behavior. Chromium dissolution was largely influenced by small changes in Cr concentration (i.e. chemical potential of Cr) in liquid sodium in the model calculation. Chromium concentration in sodium coolant, therefore, should be recognized as a critical parameter for the prediction and management of Cr dissolution behavior in the sodium-cooled fast reactor (SFR) core. Because the fuel column length showed no impact on dissolution behavior in the model calculation, no significant downstream effects possibly take place in the SFR fuel cladding tube due to the much shorter length compared with sodium loops in the SFR plant and the large axial temperature gradient. The calculated profile of Cr concentration along the wall-thickness direction was consistent with that measured in BOR-60 irradiation test where Cr concentration in sodium bulk flow was set at 0.07 wt ppm in the calculation.

Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions

Yano, Yasuhide; Tanno, Takashi; Oka, Hiroshi; Otsuka, Satoshi; Inoue, Toshihiko; Kato, Shoichi; Furukawa, Tomohiro; Uwaba, Tomoyuki; Kaito, Takeji; Ukai, Shigeharu*; et al.

Journal of Nuclear Materials, 487, p.229 - 237, 2017/04

https://doi.org/10.1016/j.jnucmat.2017.02.021

Ultra-high temperature ring tensile tests were carried out to investigate the tensile behavior of oxide dispersion strengthened (ODS) steel claddings and wrapper materials under severe accident conditions; temperatures ranged from room temperature to 1400C which is near the melting point of core materials. The experimental results showed that tensile strength of 9Cr-ODS steel claddings was highest in the core materials at the ultra-high temperatures between 900 and 1200C, but that there was significant degradation in tensile strength of 9Cr-ODS steel claddings above 1200C. This degradation was attributed to grain boundary sliding deformation with / transformation, which was associated with reduced ductility. On the other hand, tensile strength of recrystallized 12Cr-ODS and FeCrAl-ODS steel claddings retained its high value above 1200 C unlike the other tested materials. Present study includes the result of "R&D of ODS ferritic steel fuel cladding for maintaining fuel integrity at the high temperature accident condition" entrusted to Hokkaido University by the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT).

Circular dichroism in resonant angle-resolved photoemission spectra of LaNiGe

Nakatani, Yasuhiro*; Fujiwara, Hidenori*; Aratani, Hidekazu*; Mori, Takeo*; Tachibana, Shoichi*; Yamaguchi, Takashi*; Kiss, Takayuki*; Yamasaki, Atsushi*; Yasui, Akira*; Yamagami, Hiroshi*; et al.

Journal of Electron Spectroscopy and Related Phenomena, 220, p.50 - 53, 2017/01

https://doi.org/10.1016/j.elspec.2017.01.008

We report the soft X-ray angle-resolved photoemission study for LaNiGe to reveal the electronic structures derived from non-4 bands of the heavy fermion compound CeNiGe. The photoemission spectra recorded at the La M absorption edges clearly show the enhancement of the La 5 components in the valence band spectra. The circular dichroism of photoemission spectra reveals the band-dependent dichroic response due to the orbital symmetry.

Three-dimensional electronic structures and the metal-insulator transition in Ruddlesden-Popper iridates

Yamasaki, Atsushi*; Fujiwara, Hidenori*; Tachibana, Shoichi*; Iwasaki, Daisuke*; Higashino, Yuji*; Yoshimi, Chiaki*; Nakagawa, Koya*; Nakatani, Yasuhiro*; Yamagami, Kohei*; Aratani, Hidekazu*; et al.

Physical Review B, 94(11), p.115103_1 - 115103_10, 2016/11

AA2016-0587.pdf:2.55MB

https://doi.org/10.1103/PhysRevB.94.115103

In this study, we systematically investigate three-dimensional(3D) momentum-resolved electronic structures of Ruddlesden-Popper-type iridium oxides SrIrO using soft-X-ray angle-resolved photoemission spectroscopy (SX-ARPES). Our results provide direct evidence of an insulator-to-metal transition that occurs upon increasing the dimensionality of the IrO-plane structure. This transition occurs when the spin-orbit-coupled = 1/2 band changes its behavior in the dispersion relation and moves across the Fermi energy. By scanning the photon energy over 350 eV, we reveal the 3D Fermi surface in SrIrO and -dependent oscillations of photoelectron intensity in SrIrO. To corroborate the physics deduced using low-energy ARPES studies, we propose to utilize SX-ARPES as a powerful complementary technique, as this method surveys more than one whole Brillouin zone and provides a panoramic view of electronic structures.