Reducing the effect of noise generated from stepper motor for H0 collimator in J-PARC RCS

Fujiyama, Hiroki*; Takahashi, Hiroki; Okabe, Kota; Ito, Yuichi*; Hatakeyama, Shuichiro; Suzuki, Takahiro*; Otsu, Satoru*; Yamakawa, Ryuto*

Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.529 - 531, 2023/01

http://www.pasj.jp/web_publish/pasj2022/proceedings/PDF/WEP0/WEP010.pdf

Stepper motors are used for mechanical drive in collimators and wire scanner monitors of J-PARC accelerators. Many of these drive unit hardware have been used since the beginning of J-PARC construction, and it is necessary to take measures against aging deterioration. Therefore, we started updating the motor and control system from around 2017. However, when the stepper motor was updated to the current product in the RCS H0 collimator, a malfunction occurred. This is because the drive unit control system cannot correctly recognize the state of the LS (limit switch) due to the noise generated by the motor driver, which hinders the operation. When the noise generated from the old and new stepper motors was measured in a simple test environment for confirmation, it was found that the current product was clearly larger. As a countermeasure, when the wiring of the stepper motor, which was bundled in a single multi-core cable, was separated into separate cables for the power system and LS signal system, the noise level was reduced to about 1/10 and normal operation was restored. I was able to. In this case, we report on noise countermeasures for the RCS H0 collimator drive unit.

Structure and magnetic properties of Fe nanoparticles in amorphous silica implanted with Fe ions and effect of subsequent energetic heavy ion irradiation

Iwase, Akihiro*; Fukuda, Kengo*; Saito, Yuichi*; Okamoto, Yoshihiro; Semboshi, Satoshi*; Amekura, Hiroshi*; Matsui, Toshiyuki*

Journal of Applied Physics, 132(16), p.163902_1 - 163902_10, 2022/10

https://doi.org/10.1063/5.0102438

Amorphous SiO samples were implanted with 380 keV Fe ions at room temperature. After implantation, some of the samples were irradiated with 16 MeV Au ions. magnetic properties were investigated using a SQUID magnetometer, and the morphology of the Fe-implanted SiO samples was examined using transmission electron microscopy and X-ray absorption spectroscopy (EXAFS and XANES), which showed that the size of Fe nanoparticles was increasing The size of Fe nanoparticles increased with increasing Fe implantation amount; some of the Fe nanoparticles consisted of Fe oxides, and the valence and structure of Fe atoms became closer to that of metallic -Fe with increasing Fe injection amount. The magnetization-field curve of the sample implanted with a small amount of Fe was reproduced by Langevin's equation, suggesting that the Fe nanoparticles behave in a superparamagnetic manner. In addition, when a large amount of Fe was implanted, the magnetization-magnetic field curve shows a ferromagnetic state. These magnetic property results are consistent with the X-ray absorption results. Subsequent 16 MeV Au irradiation crushed the Fe nanoparticles, resulting in a decrease in magnetization.

Status of decommissioning for prototype ATR Fugen and FBR Monju

Ito, Kenji; Kondo, Tetsuo; Nakamura, Yasuyuki; Matsuno, Hiroki; Nagaoki, Yoshihiro; Sakuma, Yuichi

Dekomisshoningu Giho, (63), p.1 - 26, 2022/05

The prototype advanced thermal reactor Fugen entered into the decommissioning phases with the approval of the decommissioning plan in February 2008. The prototype fast breeder reactor Monju entered into the decommissioning stage with the approval of the decommissioning plan in March 2018. In April 2018, the head office of Tsuruga decommissioning demonstration was newly established to oversee the decommissioning operations in Tsuruga area, and decommissioning projects for two unique reactors have progressed safely and steadily.

Magnetic Bragg peak enhancement under ultrasound injection

Shamoto, Shinichi*; Akatsu, Mitsuhiro*; Matsuura, Masato*; Kawamura, Seiko; Harii, Kazuya*; Ono, Masao*; Chang, L.-J.*; Ito, Takashi; Nemoto, Yuichi*; Ieda, Junichi

Physical Review Research (Internet), 4(1), p.013245_1 - 013245_7, 2022/03

https://doi.org/10.1103/PhysRevResearch.4.013245

Ultrasound injection effect on a magnetic Bragg peak of yttrium iron garnet has been studied by quasielastic neutron scattering. The magnetic Bragg peak is vastly enhanced with decreasing temperature. The energy width increases proportionally to the square root of the sample temperature increase induced by the ultrasound injection. Because the magnetic Bragg peak is enhanced by the lattice vibration, the enhancement is expected to relate to the spin-lattice coupling closely. An observed sharp drop above 100 K in the longitudinal mode suggests the degradation of the spin-lattice coupling. It is consistent with the decline of spin Seebeck effect with increasing temperature above 100 K, proving the degradation mechanism by the spin-lattice coupling.

Chiral-spin rotation of non-collinear antiferromagnet by spin-orbit torque

Takeuchi, Yutaro*; Yamane, Yuta*; Yoon, J.-Y.*; Ito, Ryuichi*; Jinnai, Butsurin*; Kanai, Shun*; Ieda, Junichi; Fukami, Shunsuke*; Ohno, Hideo*

Nature Materials, 20(10), p.1364 - 1370, 2021/10

https://doi.org/10.1038/s41563-021-01005-3

Chemical characterization of a volatile dubnium compound, DbOCl

Chiera, N. M.*; Sato, Tetsuya; Eichler, R.*; Tomitsuka, Tomohiro; Asai, Masato; Adachi, Sadia*; Dressler, R.*; Hirose, Kentaro; Inoue, Hiroki*; Ito, Yuta; et al.

Angewandte Chemie; International Edition, 60(33), p.17871 - 17874, 2021/08

https://doi.org/10.1002/anie.202102808

The formation and the chemical characterization of single atoms of dubnium (Db, element 105), in the form of its volatile oxychloride, was investigated using the on-line gas phase chromatography technique, in the temperature range 350 - 600 C. Under the exact same chemical conditions, comparative studies with the lighter homologs of group-5 in the Periodic Table clearly indicate the volatility sequence being NbOCl TaOCl DbOCl. From the obtained experimental results, thermochemical data for DbOCl were derived. The present study delivers reliable experimental information for theoretical calculations on the chemical properties of transactinides.

Correction to Transport and redistribution of radiocesium in Fukushima fallout through rivers

Taniguchi, Keisuke*; Onda, Yuichi*; Smith, H. G.*; Blake, W.*; Yoshimura, Kazuya; Yamashiki, Yosuke*; Kuramoto, Takayuki*; Saito, Kimiaki

Environmental Science & Technology, 55(13), P. 9394, 2021/07

https://doi.org/10.1021/acs.est.1c02491

no abstracts in English

Behavior of light elements in iron-silicate-water-sulfur system during early Earth's evolution

Iizuka, Riko*; Goto, Hirotada*; Shito, Chikara*; Fukuyama, Ko*; Mori, Yuichiro*; Hattori, Takanori; Sano, Asami; Funakoshi, Kenichi*; Kagi, Hiroyuki*

Scientific Reports (Internet), 11(1), p.12632_1 - 12632_10, 2021/06

https://doi.org/10.1038/s41598-021-91801-3

The Earth's core consist of Fe-Ni alloy with some light elements (H, C, O, Si, S etc.). Hydrogen (H) is the most abundant element in the universe and one of the promising candidates. In this study, we have investigated the effects of sulfur(S) on hydrogenation of iron-hydrous silicate system containing saturated water in the ideal composition of the primitive Earth. We observed a series of phase transitions of Fe, dehydration of the hydrous mineral, and formation of olivine and enstatite with increasing temperature. The FeS formed as the coexisting phase of Fe under high-pressure and temperature condition, but its unit cell volume did not increase, suggesting that FeS is hardly hydrogenated. Recovered samples exhibited that H and S can be incorporated into solid Fe, which lowers the melting temperature as Fe(H)-FeS system. No detection of other light elements (C, O, Si) in solid Fe suggests that they dissolve into molten iron hydride and/or FeS in the later process of Earth's core-mantle differentiation.

Ion tracks in silicon formed by much lower energy deposition than the track formation threshold

Amekura, Hiroshi*; Toulemonde, M.*; Narumi, Kazumasa*; Li, R.*; Chiba, Atsuya*; Hirano, Yoshimi*; Yamada, Keisuke*; Yamamoto, Shunya*; Ishikawa, Norito; Okubo, Nariaki; et al.

Scientific Reports (Internet), 11(1), p.185_1 - 185_11, 2021/01

https://doi.org/10.1038/s41598-020-80360-8

We report the track formation of 10 nm in diameter in silicon irradiated with 6 MeV C, i.e., much lower energy than the previously reported energy threshold.

Experimental validation of tensile properties measured with thick samples taken from MEGAPIE target

Saito, Shigeru; Suzuki, Kazuhiro; Hatakeyama, Yuichi; Suzuki, Miho; Dai, Y.*

Journal of Nuclear Materials, 534, p.152146_1 - 152146_16, 2020/06

https://doi.org/10.1016/j.jnucmat.2020.152146

A post-irradiation examination (PIE) was performed on the tensile specimens prepared from the MEGAPIE (MEGAwatt Pilot Experiment) target which were irradiated in flowing lead-bismuth eutectic (LBE). Thicknesses of the specimens were over two times larger than that of the standard specimen. The PIE revealed that the T91 specimens showed a 1.5-2.0 times larger total elongation (TE) compared to the literature values for a specimen with standard t/w (ratio of thickness to width). It could be suggested that the t/w and TE were strongly correlated. Then, we tried to investigate the effects of the t/w on the TE by comparing unirradiated specimens. We found that there was no t/w dependence on the strength and uniform elongation. On the other hand, the TE increases with increasing t/w. Based on the experimental data, we correlated the TE with various specimens t/w to estimate appropriate TE values, including that for the standard specimen.