Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 110

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Corrosion property of container using hybrid material for thermal decomposition process of sulfuric acid

Ioka, Ikuo; Kuriki, Yoshiro*; Iwatsuki, Jin; Kawai, Daisuke*; Yokota, Hiroki*; Inagaki, Yoshiyuki; Kubo, Shinji

Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 5 Pages, 2020/08

A thermochemical water-splitting iodine-sulfur processes (IS process) is one of candidates for the large-scale production of hydrogen using heat from solar power. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. This was attributed to the formation of SiO$$_{2}$$ on the surface. The container using the hybrid material was experimentally made. The pre-oxidized container using hybrid technique was prepared for the corrosion test in boiling sulfuric acid to evaluate the corrosion characteristics of the container. There was no detaching of the surface with the weld part and the R processing. We proposed the calculation method of corrosion rate from the ions dissolved in the sulfuric acid solution after the corrosion test.

Journal Articles

Study of container using hybrid technique for sulfuric acid decomposition of thermochemical water-splitting iodine-sulfur process

Ioka, Ikuo; Iwatsuki, Jin; Kuriki, Yoshiro*; Kawai, Daisuke*; Yokota, Hiroki*; Kubo, Shinji; Inagaki, Yoshiyuki; Sakaba, Nariaki

Mechanical Engineering Journal (Internet), 7(3), p.19-00377_1 - 19-00377_11, 2020/06

A thermochemical water-splitting iodine-sulfur processes (IS process) is one of candidates for the large-scale production of hydrogen with high cost performance. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. This was attributed to the formation of SiO$$_2$$ on the surface. To confirm the production characteristics of a container using the hybrid material, the container which has a welded part, a chamfer, a curved surface was experimentally made. There was no detachment in the plasma spraying and laser treated layer of the container after the laser treatment. It was confirmed that the construction of the container with high corrosion resistance in sulfuric acid was possible in the hybrid technique.

Journal Articles

Reliability improvements of corrosion-resistant equipment for thermochemical water splitting hydrogen production iodine-sulfur process

Kamiji, Yu; Noguchi, Hiroki; Takegami, Hiroaki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji

Nuclear Engineering and Design, 361, p.110573_1 - 110573_6, 2020/05

 Times Cited Count:0 Percentile:100(Nuclear Science & Technology)

JAEA has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the high-temperature gas-cooled reactors. The glass-lined steel is one of the candidate materials which has both corrosion resistance and structural strength. This paper reveals technical matters to improve reliability of the glass-lined steel equipment. It found that the improved glass-lined steel showed soundness in the process environment from the results of stress analyses for the glass layer by FEM, tests for heat cycle, bending load and corrosion.

Journal Articles

Development of strength evaluation method of ceramic reactor for iodine-sulfur process and hydrogen production test in Japan Atomic Energy Agency

Takegami, Hiroaki; Noguchi, Hiroki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kamiji, Yu; Kasahara, Seiji; Imai, Yoshiyuki; Terada, Atsuhiko; Kubo, Shinji

Nuclear Engineering and Design, 360, p.110498_1 - 110498_6, 2020/04

 Times Cited Count:1 Percentile:24.17(Nuclear Science & Technology)

Japan Atomic Energy Agency (JAEA) has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the high-temperature gas-cooled reactors. JAEA fabricated main chemical reactors made of industrial structural materials and confirmed their integrity in practical corrosive environments in the IS process. Based on the results of these confirmation tests, JAEA have constructed a 100 NL/h-H$$_{2}$$-scale test facility made of industrial structural materials. In this report, we succeeded in extending the hydrogen production time from 8 hours to 31 hours by developing a stable hydrogen iodide solution transfer technology in a continuous hydrogen production test. In addition, using the fracture test data of the ceramic specimen, an equation for estimating the strength of the ceramic component was developed.

Journal Articles

Research and development on membrane IS process for hydrogen production using solar heat

Myagmarjav, O.; Iwatsuki, Jin; Tanaka, Nobuyuki; Noguchi, Hiroki; Kamiji, Yu; Ioka, Ikuo; Kubo, Shinji; Nomura, Mikihiro*; Yamaki, Tetsuya*; Sawada, Shinichi*; et al.

International Journal of Hydrogen Energy, 44(35), p.19141 - 19152, 2019/07

 Times Cited Count:6 Percentile:32.44(Chemistry, Physical)

Journal Articles

Development of new corrosion test equipment simulating sulfuric acid decomposition gas environment in a thermochemical hydrogen production process

Hirota, Noriaki; Kasahara, Seiji; Iwatsuki, Jin; Imai, Yoshiyuki; Ohashi, Hirofumi; Yan, X. L.; Tachibana, Yukio

Zairyo To Kankyo, 68(6), p.137 - 142, 2019/06

New corrosion test equipment for high temperature gas of decomposed sulfuric acid was manufactured in order to ascertain flow rate of sulfuric acid in the piping, occurrence of sulfuric acid decomposition reaction in the equipment, and temperature distribution inside the furnace tube. The flow rate of the sulfuric acid solution was constantly measured using an ultrasonic flowmeter. The SO$$_{3}$$ concentration at the inlet of the test equipment was almost the same as that at the inlet of the sulfuric acid decomposer in the hydrogen production plant assuming a high-temperature gas cooled reactor hydrogen-power cogeneration system (GTHTR300C). On the other hand, during a test, leakage of sulfuric acid occurred from the fitting part at the outlet side. Hence the temperature distribution of the fitting part at the outlet side was investigated using fluid analysis. As a result, it was found that the temperature at the fitting was low enough to use fluorine joint grease when the distance was 0.05 m or more away from the outlet side pipe. An improved furnace tube was manufactured and the temperature was measured again at fitting part of the outlet side. The temperature was lower that the temperature limit of the joint grease and almost the same as the temperature distribution in the fluid analysis, and leakage of sulfuric acid has not occurred to date.

Journal Articles

R&D status of hydrogen production test using IS process test facility made of industrial structural material in JAEA

Noguchi, Hiroki; Takegami, Hiroaki; Kamiji, Yu; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji

International Journal of Hydrogen Energy, 44(25), p.12583 - 12592, 2019/05

 Times Cited Count:1 Percentile:84.47(Chemistry, Physical)

JAEA has been conducting R&D on thermochemical water-splitting hydrogen production IS process to develop one of heat applications of high-temperature gas-cooled reactor. A test facility was constructed using corrosion-resistant industrial materials to verify integrity of the IS process components and to demonstrate continuous and stable hydrogen production. The performance of components installed in each section was confirmed. Subsequently, a trial operation of integration of the processing sections was successfully carried out for 8 hours with hydrogen production rate of approximately 10 NL/h. After that, hydrogen production operation was extended to 31 hours (approximately hydrogen production rate of 20 NL/h) by introducing a corrosion-resistance pump system with a developed shaft seal technology.

Journal Articles

Development of container using plasma sprayed and laser treated material for sulfuric acid decomposition of thermochemical water-splitting iodine-sulfur process

Ioka, Ikuo; Kuriki, Yoshiro*; Iwatsuki, Jin; Kubo, Shinji; Inagaki, Yoshiyuki; Sakaba, Nariaki

Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 5 Pages, 2019/05

A thermochemical water-splitting iodine-sulfur processes (IS process) is one of candidates for the large-scale production of hydrogen using heat from solar power. Severe corrosive environment which is thermal decomposition of sulfuric acid exists in the IS process. A hybrid material with the corrosion-resistance and the ductility was made by a plasma spraying and laser treatment. The specimen had excellent corrosion resistance in the condition of 95 mass% boiling sulfuric acid. This was attributed to the formation of SiO$$_{2}$$ on the surface. To confirm the production characteristics of a container using the hybrid material, the container which has a welded part, a chamfer, a curved surface was experimentally made. There was no detachment in the plasma spraying and laser treated layer of the container after the laser treatment.

Journal Articles

Current R&D status of thermochemical water splitting hydrogen production iodine-sulfur process in Japan Atomic Energy Agency, 1; Hydrogen production test and component development

Takegami, Hiroaki; Noguchi, Hiroki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kamiji, Yu; Kasahara, Seiji; Imai, Yoshiyuki; Terada, Atsuhiko; Kubo, Shinji

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

Japan Atomic Energy Agency (JAEA) has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the high-temperature gas-cooled reactors. JAEA fabricated main chemical reactors made of industrial structural materials and confirmed their integrity in practical corrosive environments in the IS process. Based on the results of these confirmation tests, JAEA have constructed a 100 NL/h-H$$_{2}$$-scale test facility made of industrial structural materials. This report will present an outline and results of hydrogen production tests and reliability improvements of operation stability and components, such as development of a strength estimation method for heat-resistant and corrosion-resistant ceramics components made of silicon carbide.

Journal Articles

Current R&D status of thermochemical water splitting hydrogen production iodine-sulfur process in Japan Atomic Energy Agency, 2; Reliability improvements of corrosion-resistant equipment

Kamiji, Yu; Noguchi, Hiroki; Takegami, Hiroaki; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

Japan Atomic Energy Agency (JAEA) has been conducting R&D on the thermochemical iodine-sulfur (IS) process for nuclear-powered hydrogen production. The IS process is one of the promising candidates of heat application of the HTGR. JAEA achieved continuous hydrogen production for one week with a hydrogen production rate of 30 NL/h by using a test apparatus made of glass and fluororesin material. Subsequently, JAEA fabricated main chemical reactors made of industrial materials and confirmed their integrity in corrosive environments in the IS process. Based on the results, JAEA has constructed a 100 NL/h-H$$_{2}$$-scale test facility made of industrial materials; one of the important materials is the glass-lined steel for corrosion resistant components such as vessels, pipes and protective sheaths of sensors. This report will present technical matters to improve reliability of the glass-lined protective sheaths of thermocouple. In addition, results of quality confirmation will be presented, which are stress analyses for the glass layer by FEM, tests for heat cycle, bending load and corrosion.

Journal Articles

Conceptual design of the steam reforming system for hydrogen production connected to HTTR

Iwatsuki, Jin; Ohashi, Hirofumi; Yan, X.

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

The HTTR is a 30MW, 950$$^{circ}$$C high temperature engineering test reactor built and operated on the site of the Oarai Research & Development Center of Japan Atomic Energy Agency (JAEA). In the framework of the HTTR project, JAEA has been conducting a research and development on the steam reforming system (CH$$_{4}$$ + H$$_{2}$$O = 3H$$_{2}$$ + CO). JAEA had constructed a mock-up test facility in 2002, and investigated transient behavior of the hydrogen production system and established system controllability. Based on the results and experience of above, the conceptual design of steam reforming system for hydrogen production connected to HTTR has been studied. The system condition was optimized considering the HTTR specification and the experience on the construction and the operation of the mock-up test facility. The hydrogen production system is heated with about 0.2MW transported from the HTTR to the hydrogen system via a helium loop. The system produces about 70 Nm$$^{3}$$/h hydrogen.

Journal Articles

Conceptual design of the iodine-sulfur process flowsheet with more than 50% thermal efficiency for hydrogen production

Kasahara, Seiji; Imai, Yoshiyuki; Suzuki, Koichi*; Iwatsuki, Jin; Terada, Atsuhiko; Yan, X.

Nuclear Engineering and Design, 329, p.213 - 222, 2018/04

 Times Cited Count:4 Percentile:29.78(Nuclear Science & Technology)

A conceptual design of a practical large scale plant of the thermochemical water splitting iodine-sulfur (IS) process flowsheet was carried out as a heat application of JAEA's commercial high temperature gas cooled reactor GTHTR300C plant design. Innovative techniques proposed by JAEA were applied for improvement of hydrogen production thermal efficiency; depressurized flash concentration H$$_{2}$$SO$$_{4}$$ using waste heat from Bunsen reaction, prevention of H$$_{2}$$SO$$_{4}$$ vaporization from a distillation column by introduction of H$$_{2}$$SO$$_{4}$$ solution from a flash bottom, and I$$_{2}$$ condensation heat recovery in an HI distillation column. Hydrogen of about 31,900 Nm$$^{3}$$/h would be produced by 170 MW heat from the GTHTR300C. A thermal efficiency of 50.2% would be achievable with incorporation of the innovative techniques and high performance HI concentration and decomposition components and heat exchangers expected in future R&D.

Journal Articles

Design of HTTR-GT/H$$_{2}$$ test plant

Yan, X. L.; Sato, Hiroyuki; Sumita, Junya; Nomoto, Yasunobu*; Horii, Shoichi*; Imai, Yoshiyuki; Kasahara, Seiji; Suzuki, Koichi*; Iwatsuki, Jin; Terada, Atsuhiko; et al.

Nuclear Engineering and Design, 329, p.223 - 233, 2018/04

 Times Cited Count:6 Percentile:15.83(Nuclear Science & Technology)

The pre-licensing design of an HTGR cogeneration test plant to be coupled to JAEA's existing test reactor HTTR is presented. The plant is designed to demonstrate the system of JAEA commercial plant design GTHTR300C. With construction planned to be completed around 2025, the test plant is expected to be the first-of-a-kind nuclear system operating on two of the advanced energy conversion systems attractive for the HTGR closed cycle helium gas turbine for power generation and thermochemical iodine-sulfur water-splitting process for hydrogen production.

JAEA Reports

Development plan of austenitic Fe and Ni based alloys with improved corrosion resistance to sulfuric acid and HI fluids of industrial processes

Hirota, Noriaki; Iwatsuki, Jin; Imai, Yoshiyuki; Yan, X.

JAEA-Technology 2017-027, 19 Pages, 2017/12

JAEA-Technology-2017-027.pdf:2.08MB

In this study, austenitic Fe-based alloys and Ni based alloys was developed as candidate structural materials for equipment operated in sulfuric acid and hydrogen iodide (HI) environment, which exists in various industrial processes including iodine-sulfur (IS) hydrogen production process and geothermal power generation process. The objectives of the study are to achieve the corrosion resistance performance sufficient under the working condition of these processes and to overcome the practical scale-up difficulty of the ceramic (SiC) material that is presently used in the processes due to the manufacturing size limitation of the ceramic. The chemical composition development plan for the austenitic Fe-based alloys is threefold: reinforcement of matrix by addition of Cu and Ta, strength compensation of the surface film by addition of Si and Ti, and prevention of peeling of surface oxide by addition of rare earth elements. Because addition of Cu and Si is known to reduce the ductility of the material and thus manufacturability of the component, it is important to determine the allowable amount of each element to be added. On the other hand, the chemical composition development plan for the Ni based alloys is reinforcement of matrix by addition of Mo, W and Ta, strength compensation of the surface film by addition of Ti, and prevention of peeling of surface oxide by addition of rare earth elements. In particular, the addition of Mo and W to the Ni based alloy is expected to be effective in preventing dimensional deviation of structures from increasing during heating and cooling of process equipment. Various material specimens will be fabricated based on the above chemical composition development plans and tests on these specimens will then be carried out to confirm the corrosion resistance performance under the fluid conditions simulating each industrial processes.

Journal Articles

R&D status in thermochemical water-splitting hydrogen production iodine-sulfur process at JAEA

Noguchi, Hiroki; Takegami, Hiroaki; Kasahara, Seiji; Tanaka, Nobuyuki; Kamiji, Yu; Iwatsuki, Jin; Aita, Hideki; Kubo, Shinji

Energy Procedia, 131, p.113 - 118, 2017/12

 Times Cited Count:9 Percentile:0.22

The IS process is the most deeply investigated thermochemical water-splitting hydrogen production cycle. It is in a process engineering stage in JAEA to use industrial materials for components. Important engineering tasks are verification of integrity of the total process and stability of hydrogen production in harsh environment. A test facility using corrosion-resistant materials was constructed. The hydrogen production ability was 100 L/h. Operation tests of each section were conducted to confirm basic functions of reactors and separators, etc. Then, a trial operation for integration of the sections was successfully conducted to produce hydrogen of about 10 L/h for 8 hours.

Journal Articles

Current R&D status of thermochemical water splitting iodine-sulfur process in Japan Atomic Energy Agency

Kasahara, Seiji; Iwatsuki, Jin; Takegami, Hiroaki; Tanaka, Nobuyuki; Noguchi, Hiroki; Kamiji, Yu; Onuki, Kaoru; Kubo, Shinji

International Journal of Hydrogen Energy, 42(19), p.13477 - 13485, 2017/05

 Times Cited Count:25 Percentile:19.73(Chemistry, Physical)

Current R&D on the thermochemical water splitting iodine-sulfur (IS) process in Japan Atomic Energy Agency is summarized. Reactors were fabricated with industrial materials and verified by test operations: a Bunsen reactor, a H$$_{2}$$SO$$_{2}$$ decomposer, and a HI decomposer. Reactors of industrial materials showed corrosion stability. Demonstration of the test facility verified integrity of process components and stability of hydrogen production. An 8 hours continuous operation of the total IS process was performed in February 2016 with H$$_{2}$$ production rate of 10 L/h.

Journal Articles

Current status and prospect on R&D of the heat utilization technology using the high-temperature gas-cooled reactor with superior safety

Iwatsuki, Jin

Kino Zairyo, 37(3), p.38 - 45, 2017/03

This report shows the current status and prospect on R&D of the heat utilization technology using the high-temperature gas-cooled reactor (HTGR). Regarding the heat utilization of HTGR, it is described about the outline, intrinsic safety, high efficiency heat utilization, and possibility of wide range heat utilization fields. In addition, we outlined the technological developments related to gas turbine power generation and IS process hydrogen production that are part of heat utilization technology and being undertaken by JAEA.

Journal Articles

IS process hydrogen production test for components and system made of industrial structural material, 2; H$$_{2}$$SO$$_{4}$$ decomposition, HI distillation, and HI decomposition section

Noguchi, Hiroki; Takegami, Hiroaki; Kamiji, Yu; Tanaka, Nobuyuki; Iwatsuki, Jin; Kasahara, Seiji; Kubo, Shinji

Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.1029 - 1038, 2016/11

JAEA has been conducting R&D on the IS process for nuclear-powered hydrogen production. We have constructed a 100 NL/h-H$$_2$$-scale test apparatus made of industrial materials. At first, we investigated performance of components in this apparatus. In this paper, the test results of H$$_2$$SO$$_4$$ decomposition, HI distillation, and HI decomposition were shown. In the H$$_2$$SO$$_4$$ section, O$$_2$$ production rate is proportional to H$$_2$$SO$$_4$$ feed rate and SO$$_3$$ decomposition ratio was estimated about 80%. In HI distillation section, we confirmed to acquire a concentrated HI solution over azeotropic HI composition in the condenser. In HI decomposition section, H$$_2$$ could be produced stably by HI decomposer and decomposition ratio was about 18%. The H$$_2$$SO$$_4$$ decomposer, the HI distillation column, and the HI decomposer were workable. Based on the results added to that shown in Series I, we conducted a trial continuous operation and succeeded it for 8 hours.

Journal Articles

IS process hydrogen production test for components and system made of industrial structural material, 1; Bunsen and HI concentration section

Tanaka, Nobuyuki; Takegami, Hiroaki; Noguchi, Hiroki; Kamiji, Yu; Iwatsuki, Jin; Aita, Hideki; Kasahara, Seiji; Kubo, Shinji

Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.1022 - 1028, 2016/11

Japan Atomic Energy Agency (JAEA) has manufactured 100 NL/h-H$$_2$$-scale hydrogen test apparatus. In advance to conduct the continuous operation, we investigated performance of the components in each section of the IS process. In this paper, the results of test of Bunsen and HI concentration sections was shown. In Bunsen reaction, section, we confirmed that outlet gas flow rate included no SO$$_{2}$$ gas, indicating that all the feed SO$$_{2}$$ gas was absorbed to the solution in the Bunsen reactor for the Bunsen reaction. On the basis of these results, we evaluated that Bunsen reactor was workable. In HI concentration section, HI concentration was conducted by EED stack. As a result, it can concentrate HI in HIx solution as theoretically predicted on the basis of the previous paper. Based on the results added to that shown in Series II, we have conducted a trial continuous operation and succeeded it for 8 hours.

Journal Articles

Conceptual design of iodine-sulfur process flowsheet with more than 50% thermal efficiency for hydrogen production

Kasahara, Seiji; Imai, Yoshiyuki; Suzuki, Koichi*; Iwatsuki, Jin; Terada, Atsuhiko; Yan, X.

Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.491 - 500, 2016/11

A conceptual design of a practical large scale plant of the thermochemical water splitting iodine-sulfur (IS) process flowsheet was carried out as a heat application of Japan Atomic Energy Agency's commercial Gas Turbine High Temperature Reactor Cogeneration (GTHTR300C) plant design. Innovative techniques proposed by JAEA were applied for improvement of hydrogen production thermal efficiency; flash concentration of H$$_{2}$$SO$$_{4}$$ using waste heat from Bunsen reaction, prevention of H$$_{2}$$SO$$_{4}$$ vaporization from a distillation column by introduction of H$$_{2}$$SO$$_{4}$$ solution, and I$$_{2}$$ condensation heat recovery by direct contact heat exchange in the HI distillation column. A simulation of material and heat balance showed hydrogen of about 31,900 Nm$$^{3}$$/h was produced by 170 MW heat from the GTHTR300C. A process thermal efficiency of 50.2% was achievable with incorporation of the innovative techniques and several high performance components expected in future R&D.

110 (Records 1-20 displayed on this page)