Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Giroud, C.*; Jachmich, S.*; Jacquet, P.*; J
rvinen, A.*; Lerche, E.*; Rimini, F.*; Aho-Mantila, L.*; Aiba, Nobuyuki; Balboa, I.*; Belo, P.*; et al.
Plasma Physics and Controlled Fusion, 57(3), p.035004_1 - 035004_20, 2015/03
Times Cited Count：68 Percentile：95.98(Physics, Fluids & Plasmas)This paper reports the progress made at JET-ILW on integrating the requirements of the reference ITER baseline scenario with normalized confinement factor of 1, at a normalized pressure of 1.8 together with partially detached divertor whilst maintaining these conditions over many energy confinement times. The 2.5 MA high triangularity ELMy H-modes are studied with two different divertor configurations with D-gas injection and nitrogen seeding. The power load reduction with N seeding is reported. The relationship between an increase in energy confinement and pedestal pressure with triangularity is investigated. The operational space of both plasma configurations is studied together with the ELM energy losses and stability of the pedestal of unseeded and seeded plasmas.
Wakai, Eiichi; Kim, B. J.; Nozawa, Takashi; Kikuchi, Takayuki; Hirano, Michiko*; Kimura, Akihiko*; Kasada, Ryuta*; Yokomine, Takehiko*; Yoshida, Takahide*; Nogami, Shuhei*; et al.
Proceedings of 24th IAEA Fusion Energy Conference (FEC 2012) (CD-ROM), 6 Pages, 2013/03
Mayoral, M.-L.*; Bobkov, V.*; Colas, L.*; Goniche, M.*; Hosea, J.*; Kwak, J. G.*; Pinsker, R.*; Moriyama, Shinichi; Wukitch, S.*; Baity, F. W.*; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 11 Pages, 2011/03
For any given ICRF antenna design for ITER, the maximum achievable power strongly depends on the density profiles in the SOL. It has been suggested that gas injection can be used to modify the SOL profiles and thus minimize the sensitivity of the ICRF coupling to variations in the density at the edge of the confined plasma. Recently joint experiments coordinated by the ITPA were performed to characterize further this method. An increase in SOL density during gas injection led to improved coupling for all tokamaks in this multi-machine comparison. The effectiveness of using gas injection over a wide range of conditions, as a tool to tailor the edge density in front of the ICRF antennas, is documented for different gas inlet location and plasma configurations. In addition, any deleterious effects on the confinement and interaction with the antenna near-field are not investigated.
