検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 28 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys

Woo, W.*; Kim, Y. S.*; Chae, H. B.*; Lee, S. Y.*; Jeong, J. S.*; Lee, C. M.*; Won, J. W.*; Na, Y. S.*; 川崎 卓郎; Harjo, S.; et al.

Acta Materialia, 246, p.118699_1 - 118699_13, 2023/03

 被引用回数:4 パーセンタイル:97.51(Materials Science, Multidisciplinary)

In situ neutron diffraction experiments have been performed under loading in cast-wrought (CW) and additively manufactured (AM) equiatomic CoCrNi medium-entropy alloys. The diffraction line profile analysis correlated the faulting-embedded crystal structure to the dislocation density, stacking/twin fault probability, and stacking fault energy as a function of strain. The results showed the initial dislocation density of 1.8$$times$$10$$^{13}$$ m$$^{-2}$$ in CW and 1.3$$times$$10$$^{14}$$ m$$^{-2}$$ in AM. It significantly increased up to 1.3$$times$$10$$^{15}$$ m-$$^{-2}$$ in CW and 1.7$$times$$10$$^{15}$$ m$$^{-2}$$ in AM near fracture. The dislocation density contributed to the flow stress of 470 MPa in CW and 600 MPa in AM, respectively. Meanwhile, the twin fault probability of CW (2.7%) was about two times higher than AM (1.3%) and the stacking fault probability showed the similar tendency. The twinning provided strengthening of 360 MPa in CW and 180 MPa in AM. Such a favorable strengthening via deformation twinning in CW and dislocation slip in AM was attributed to the stacking fault energy. It was estimated as 18.6 mJ/m$$^{2}$$ in CW and 37.5 mJ/m$$^{2}$$ in AM by the strain field of dislocations incorporated model. Dense dislocations, deformation twinning, and atomic-scale stacking structure were examined by using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM).

論文

Soft, skin-interfaced microfluidic systems with integrated immunoassays, fluorometric sensors, and impedance measurement capabilities

Kim, S.*; Lee, B.*; Reeder, J. T.*; Seo, S. H.*; Lee, S.-U.*; Hourlier-Fargette, A.*; Shin, J.*; 関根 由莉奈; Jeong, H.*; Oh, Y. S.*; et al.

Proceedings of the National Academy of Sciences of the United States of America, 117(45), p.27906 - 27915, 2020/11

 被引用回数:62 パーセンタイル:93.03(Multidisciplinary Sciences)

本研究では、汗のコルチゾール分析のための流動イムノアッセイ、グルコースとアスコルビン酸(ビタミンC)分析のための蛍光測定イメージング、および電極を使用した発汗速度のデジタルトラッキングを組み合わせた、ワイヤレス,バッテリー不要の皮膚インターフェースマイクロ流体システムを実現した。運動している被験者を対象とした体系的なテストにより、本開発デバイスが物理的ストレスと生化学的相関を追跡可能であることが示された。

論文

Comparison of dislocation density, twin fault probability, and stacking fault energy between CrCoNi and CrCoNiFe medium entropy alloys deformed at 293 and 140K

Woo, W.*; Naeem, M.*; Jeong, J.-S.*; Lee, C.-M.*; Harjo, S.; 川崎 卓郎; He, H.*; Wang, X.-L.*

Materials Science & Engineering A, 781, p.139224_1 - 139224_7, 2020/04

 被引用回数:32 パーセンタイル:93.55(Nanoscience & Nanotechnology)

To elucidate deformation behavior behind the exceptional mechanical properties of CrCoNi based medium entropy alloys, the deformation related microstructural parameters were determined by using in situ neutron diffraction and peaks profile analysis methods. Superior tensile strength and elongation of the CrCoNi alloy is relevant to higher twin fault probability ($$P_{tw}$$, up to 3.8%) and dislocation density ($$rho$$, up to 9.7 $$times$$ 10$$^{15}$$ m$$^{-2}$$) compared to those (1.3% and 3.4 $$times$$ 10$$^{15}$$ m$$^{-2}$$, respectively) of the CrCoNiFe at 293K. Meanwhile, at 140K, the $$P_{tw}$$ of the CrCoNiFe significantly increased up to 4.4% with the stable $$rho$$ of $$sim$$5.0 $$times$$ 10$$^{15}$$ m$$^{-2}$$ and its mechanical properties overwhelm those of the CrCoNi at 273K. Such twinning dominant deformation mechanism at low temperature is also assured by lower stacking fault energy (SFE) of the CrCoNiFe at 140K compared to those of the CrCoNi and CrCoNiFe alloys at 293K.

論文

Stacking fault energy analyses of additively manufactured stainless steel 316L and CrCoNi medium entropy alloy using in situ neutron diffraction

Woo, W.*; Jeong, J.-S.*; Kim, D.-K.*; Lee, C. M.*; Choi, S.-H.*; Suh, J.-Y.*; Lee, S. Y.*; Harjo, S.; 川崎 卓郎

Scientific Reports (Internet), 10(1), p.1350_1 - 1350_15, 2020/01

 被引用回数:54 パーセンタイル:94.55(Multidisciplinary Sciences)

Stacking fault energies (SFE) were determined in additively manufactured (AM) stainless steel (SS 316 L) and equiatomic CrCoNi medium-entropy alloys. In situ neutron diffraction was performed to obtain a number of faulting-embedded diffraction peaks simultaneously from a set of (hkl) grains during deformation. The peak profiles diffracted from imperfect crystal structures were analyzed to correlate stacking fault probabilities and mean-square lattice strains to the SFE. The result shows that averaged SFEs are 32.8 mJ/m$$^2$$ for the AM SS 316 L and 15.1 mJ/m$$^2$$ for the AM CrCoNi alloys. Meanwhile, during deformation, the SFE varies from 46 to 21 mJ/m$$^2$$ (AM SS 316 L) and 24 to 11 mJ/m$$^2$$ (AM CrCoNi) from initial to stabilized stages, respectively. The transient SFEs are attributed to the deformation activity changes from dislocation slip to twinning as straining.

論文

Spontaneous decays of magneto-elastic excitations in non-collinear antiferromagnet (Y,Lu)MnO$$_{3}$$

Oh, J.*; Le, M. D.*; Nahm, H.-H.*; Sim, H.*; Jeong, J.*; Perring, T. G.*; Woo, H.*; 中島 健次; 河村 聖子; Yamani, Z.*; et al.

Nature Communications (Internet), 7, p.13146_1 - 13146_6, 2016/10

 被引用回数:53 パーセンタイル:86.71(Multidisciplinary Sciences)

(Y,Lu)MnO$$_{3}$$において、磁気励起とフォノンが結合する磁気弾性励起を中性子散乱により観測し、その量子的振る舞いを調べた。

論文

Projection imaging with directional electron and proton beams emitted from an ultrashort intense laser-driven thin foil target

西内 満美子; Choi, I. W.*; 大道 博行; 中村 龍史*; Pirozhkov, A. S.; 余語 覚文*; 小倉 浩一; 匂坂 明人; 織茂 聡; 大東 出*; et al.

Plasma Physics and Controlled Fusion, 57(2), p.025001_1 - 025001_9, 2015/02

 被引用回数:2 パーセンタイル:9.07(Physics, Fluids & Plasmas)

超高強度レーザーと薄膜との相互作用によって発生する電子ビームと陽子ビームによる同時イメージングを行った。20ミクロンメートルの電子源及び10ミクロンメートルの陽子源からの電子、及び陽子線で、メッシュのクリアなイメージ取得に成功した。これらの情報から、それぞれのビームの源のサイズ、位置、ビームのエミッタンス等を求めた。また、物理現象を比較するため、2DPICコードとの比較も行った。

論文

Characteristics of global energy confinement in KSTAR L- and H-mode plasmas

Kim, H.-S.*; Jeon, Y. M.*; Na, Y.-S.*; Ghim, Y.-C.*; Ahn, J.-W.*; Yoon, S. W.*; Bak, J. G.*; Bae, Y. S.*; Kim, J. S.*; Joung, M.*; et al.

Nuclear Fusion, 54(8), p.083012_1 - 083012_11, 2014/08

 被引用回数:8 パーセンタイル:37.82(Physics, Fluids & Plasmas)

KSTARのLモードおよびHモードプラズマにおいてエネルギー閉じ込め特性を定量的に評価し、多変数回帰解析を行い多装置スケーリング則と比較した。解析したKSTARプラズマのエネルギー閉じ込め時間はLモードで0.04-0.16秒、Hモードで0.06-0.19秒の範囲にある。多変数回帰解析によると、閉じ込め時間は多装置スケーリング則と比較して損失パワーに関しては同程度の、プラズマ電流に関してはわずかに強い依存性が見られた。一方で、非円形度に関しては多装置スケーリング則が正の冪乗依存性を示すのに対してKSTARでは負の冪乗依存性を示した(Lモードで-0.68乗、Hモードで-0.76乗)。KSTARでは非円形度の増加と共にダイバータ足位置が移動するため、不純物の混入量が増加して閉じ込めを劣化させているなどの原因が考えられる。

論文

Development of high voltage power supply for the KSTAR 170 GHz ECH and CD system

Jeong, J. H.*; Bae, Y. S.*; Joung, M.*; Kim, H. J.*; Park, S. I.*; Han, W. S.*; Kim, J. S.*; Yang, H. L.*; Kwak, J. G.*; 坂本 慶司; et al.

Fusion Engineering and Design, 88(5), p.380 - 387, 2013/06

 被引用回数:3 パーセンタイル:25.83(Nuclear Science & Technology)

A 3.6 MW DC power supply system was developed for the 170 GHz EC H&CD system in KSTAR. It consists of a cathode power supply (CPS), an anode power supply (APS) and a body power supply (BPS). The CPS is capable of supplying a voltage of -66 kV and a current of 55 A to the cathode with respect to the collector using pulse step modulation (PSM). The APS is a voltage divider system consisting of a fixed resistor and zener diode units with the capability of 60 kV stand-off voltage. For high frequency current modulation, the parallel discharge switch is introduced between the cathode and anode. The BPS is a DC power supply with 50 kV/160 mA. The series MOS-FET solid-state switch is used for on/off modulation in the body voltage sychronizing with anode voltage. The parallel discharge switch is also introduced between the body and collector for high frequency RF modulation. This paper describes the key features of the high voltage power supply system as well as the test results.

論文

First neutral beam injection experiments on KSTAR tokamak

Jeong, S. H.*; Chang, D. H.*; Kim, T. S.*; In, S. R.*; Lee, K. W.*; Jin, J. T.*; Chang, D. S.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Review of Scientific Instruments, 83(2), p.02B102_1 - 02B102_3, 2012/02

 被引用回数:22 パーセンタイル:68.17(Instruments & Instrumentation)

KSTAR用中性粒子入射装置全体の1/3が2010年に完成し、入射実験を行った。この装置のイオン源は、原子力機構のプラズマ源とKAERIの多孔型加速電極で構成されている。入射実験前にイオン源の特性を調べ、ビーム発散角が0.8度、イオン組成比D$$^{+}$$/D$$_{2}$$$$^{+}$$/D$$_{3}$$$$^{+}$$が75:20:5、アーク効率1.0A/kWと良好な特性を確認した。KSTARへの入射実験では、0.7-1.5MWを70-90keVのエネルギーで入射した。プラズマのLモードからHモードへの遷移を確認でき、D-D反応による中性子発生を観測し、イオン温度とプラズマ閉じ込めエネルギーの上昇を観測した。

論文

Arc discharge characteristics of a long pulse ion source for the KSTAR neutral beam injector

Chang, D. H.*; Jeong, S. H.*; Jin, J. T.*; Chang, D. S.*; Kim, T. S.*; Lee, K. W.*; In, S. R.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Journal of the Korean Physical Society, 59(2), p.275 - 280, 2011/08

 被引用回数:3 パーセンタイル:27.61(Physics, Multidisciplinary)

KSTARの中性粒子入射装置(NBI)に向けて長パルスイオン源を開発し、イオン源のアーク放電特性を調べた。イオン源は、多極磁場型バケットタイプのプラズマ源と多数の円孔を配置した4枚のビーム加速電極から成る加速器で構成されている。安定で効率の良いアーク放電プラズマをアーク電源の一定パワーモード運転にて70kWまで生成することに成功した。アーク放電の安定な運転領域について、フィラメント加熱電圧,アーク電力、そして導入重水素ガスの量の変化に関して調べた。

論文

Results of beam extraction performance for the KSTAR neutral beam injector

Chang, D. H.*; Jeong, S. H.*; Kim, T. S.*; Lee, K. W.*; In, S. R.*; Jin, J. T.*; Chang, D. S.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Japanese Journal of Applied Physics, 50(6), p.066302_1 - 066302_7, 2011/06

 被引用回数:10 パーセンタイル:44.1(Physics, Applied)

KSTARにおいて初めての中性粒子入射装置が据え付けられ運転された。85kVで32Aのビームを5秒間安定に引出すことができた。さらに80kV25Aでは14秒の長パルス運転が達成された。最適なパービアンスは1.15マイクロパービアンスであることが確認できた。中性化効率も偏向磁石を使用して熱的カロリメータで測定した。アーク効率は0.6$$sim$$1.1A/kWの高い値が得られた。中性粒子ビームパワーとしては80keVのエネルギーで1.0MWがKSTARプラズマに入射できた。

論文

Development of a plasma generator for a long pulse ion source for neutral beam injectors

渡邊 和弘; 大楽 正幸; 戸張 博之; 柏木 美恵子; 井上 多加志; 花田 磨砂也; Jeong, S. H.*; Chang, D. H.*; Kim, T. S.*; Kim, B. R.*; et al.

Review of Scientific Instruments, 82(6), p.063507_1 - 063507_6, 2011/06

 被引用回数:15 パーセンタイル:59.08(Instruments & Instrumentation)

中性粒子入射装置(NBI)のための長パルスイオン源用プラズマ源を開発した。このプラズマ源はビーム出力120keV, 65A出力を目標として設計したものであり、ビーム引出面12cm$$times$$46cmの大きな領域を有した多極磁場型プラズマ源である。プラズマ源の外側をサマリウムコバルト永久磁石で囲みカスプ磁場配位とした。本プラズマ源を日韓協力の下、韓国のKSTAR NBIテストスタンドに取付け長パルス試験を行った。その結果、ビーム電流65Aを生成できるアーク放電パワー70kWで200秒間のプラズマ生成運転に成功し、長パルス性能を実証した。ビーム引出部のプラズマの空間的一様性については、イオン飽和電流の平均値からのばらつきが$$pm$$8%以下であることを確認でき、大面積に一様なプラズマが生成できることを確認した。また、ビーム引き出し試験においては、73kV, 41A, 5秒までの生成に成功し、0.9-1.1A/kWの高いアーク効率を確認できた。これらによって本プラズマ源の長パルス性能を確認できた。

論文

Commissioning results of the KSTAR neutral beam system

Bae, Y. S.*; Park, Y. M.*; Kim, J. S.*; Han, W. S.*; Kwak, S. W.*; Chang, Y. B.*; Park, H. T.*; Song, N. H.*; Chang, D. H.*; Jeong, S. H.*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 9 Pages, 2011/03

中性粒子入射(NBI)システムは、韓国超伝導トカマク先進研究装置(KSTAR)における高性能運転と長パルス運転のためのイオン加熱と電流駆動を行うように設計された。KSTAR用NBIは2つのビームラインで構成されている。各々のビームラインはイオン源1台あたり最大ビームエネルギー120keVで重水素中性粒子ビームパワー2.5MW以上を入射できるよう設計されたイオン源を3台内蔵している。したがって、KSTAR用NBIシステムの最終目標は2つのビームラインで重水素中性粒子ビームパワー14MW以上の入射を目指している。NBIシステムの計画に則り、各々のコンポーネントとサブシステムの試運転を含めた2010年活動においては、最初のNBIシステムにより、KSTARトカマク・プラズマへ1台のイオン源からビーム入射を行うことである。この論文では、1台のイオン源を用いた最初のNBIシステムの建設と調整運転について紹介する。

論文

Status and result of the KSTAR upgrade for the 2010's campaign

Yang, H. L.*; Kim, Y. S.*; Park, Y. M.*; Bae, Y. S.*; Kim, H. K.*; Kim, K. M.*; Lee, K. S.*; Kim, H. T.*; Bang, E. N.*; Joung, M.*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03

韓国超伝導トカマク先進研究装置(KSTAR)における高楕円度でダイバータ配位を有するプラズマ生成を目指した2010年の運転のため、プラズマ形状制御に不可欠なハードウェア・システムが新たに据え付けられ改良された。この論文では、改良されたシステムの一般的な構成の概要を述べる。さらに、システムにおいてキーとなる幾つかの性能と試験結果についても報告する。

論文

ECRH assisted plasma start-up with toroidally inclined launch; Multi-machine comparison and perspectives for ITER

Stober, J.*; Jackson, G. L.*; Ascasibar, E.*; Bae, Y.-S.*; Bucalossi, J.*; Cappa, A.*; Casper, T.*; Cho, M. H.*; Gribov, Y.*; Granucci, G.*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2010/10

ECRH assisted plasma breakdown is foreseen with full and half magnetic field in ITER. As reported earlier, the corresponding O1- and X2-schemes have been successfully used for pre-ionisation and breakdown assist in present day devices. This contribution reports on common experiments studying the effect of toroidal inclination of the ECR beam, which is $$ge 20^circ$$ in ITER. All devices could demonstrate successful breakdown assist also for this case, although in some experiments the necessary power was almost a factor of two higher compared to perpendicular launch. Differences between the devices with regard to the required power and vertical field are discussed and analysed. In contrast to most of these experiments, ITER will build up loop voltage prior to the formation of the field null due to the strong shielding by the vessel. Possible consequences of this difference are discussed.

論文

Efficient production of a collimated MeV proton beam from a Polyimide target driven by an intense femtosecond laser pulse

西内 満美子; 大道 博行; 余語 覚文; 織茂 聡; 小倉 浩一; Ma, J.-L.; 匂坂 明人; 森 道昭; Pirozhkov, A. S.; 桐山 博光; et al.

Physics of Plasmas, 15(5), p.053104_1 - 053104_10, 2008/05

 被引用回数:44 パーセンタイル:83.88(Physics, Fluids & Plasmas)

超高強度フェムト秒レーザーを7.5, 12.5, and 25$$mu$$m厚のポリイミドターゲットに照射することにより、最高エネルギー4MeVの高フラックスプロトンビームを発生した。レーザーのエネルギーは1.7Jパルス幅34fs強度は3$$times$$10$$^{19}$$Wcm$$^{-2}$$であった。Amplified spontaneous emissionの強度(コントラスト)はメインパルスの4$$times$$10$$^{-8}$$であった。レーザーからプロトンへのエネルギーの変換効率は、3%に達し、ナノメートル厚の超薄型ターゲットとコントラストが極低いレーザー($$sim$$10$$^{-10}$$)を使って得られた既存の結果とほぼ同じか、それよりも良い結果を得た。

論文

Six-party qualification program of FW fabrication methods for ITER blanket module procurement

伊尾木 公裕; Elio, F.*; Barabash, V.*; Chuyanov, V.*; Rozov, V.*; Wang, X.*; Chen, J.*; Wang, L.*; Lorenzetto, P.*; Peacock, A.*; et al.

Fusion Engineering and Design, 82(15-24), p.1774 - 1780, 2007/10

 被引用回数:13 パーセンタイル:66.25(Nuclear Science & Technology)

2005年12月にITER機器の調達分担がまとめられ、第一壁では性能評価試験の必要性が、規定された。これに基づいて、主要な内容とマイルストンを定めた「調達計画」が策定されている。中国,EU,日本,韓国,ロシア,USの6極による、1700枚の第一壁パネルの製作を考えると性能評価のための試験は不可欠である。性能評価のためのモックアップは80$$times$$240$$times$$81mm(3枚のBeタイル)の大きさで、EUとUSの試験設備を用いて熱負荷試験を行う。ITER第一壁の熱負荷条件は最大0.5MW/m$$^{2}$$(定常)$$times$$30,000回である。標準化された方法により機械強度試験も行う。試験結果が所定の条件を満足した極のみが、ITER第一壁の調達を行うこととなる。セミ・プロトタイプの製作もITER実機の製造前に行う予定である。

論文

Simultaneous proton and X-ray imaging with femtosecond intense laser driven plasma source

織茂 聡; 西内 満美子; 大道 博行; 余語 覚文; 小倉 浩一; 匂坂 明人; Li, Z.*; Pirozhkov, A. S.; 森 道昭; 桐山 博光; et al.

Japanese Journal of Applied Physics, Part 1, 46(9A), p.5853 - 5858, 2007/09

 被引用回数:16 パーセンタイル:53.23(Physics, Applied)

高強度短パルスチタンサファイヤレーザーを使って、数MeVのプロトンとkeVのX線と同時に同じ場所から発生させることが可能である。今回、X線とプロトンのソースから10mm離れたサンプルの同時投影像を測定することに成功した。この実験はとてもシンプルな実験であるが、数100fsからpsの分解能を持っている。ディテクターとして、CR39とイメージングプレートを使用した。この方法によってミクロン構造の正確な観測に応用可能である。

論文

Status of KSTAR electron cyclotron heating system

Bae, Y. S.*; Na, Y. S.*; Oh, Y. K.*; Kwon, M.*; Bak, J. S.*; Lee, G. S.*; Jeong, J. H.*; Park, S. I.*; Cho, M. H.*; Namkung, W.*; et al.

Fusion Science and Technology, 52(2), p.321 - 333, 2007/08

 被引用回数:23 パーセンタイル:81.85(Nuclear Science & Technology)

84GHz, KSTAR電子サイクロトロン波加熱システムにおいてジャイロトロンの実験を開始し、これまでに20$$mu$$secのパルス発振に成功した。また、入射アンテナ(ランチャー)を設計製作し、KSTAR装置に取り付けプラズマ実験が行える状況にある。また、ITERを想定したNTM制御あるいは内部輸送障壁生成を目的とした170GHz電子サイクロトロン波加熱システム開発を行っているが、原子力機構がITER用に開発した170GHz, 1MWジャイロトロンを設置する予定となっている。本論文では、KSTARにおける84GHz及び170GHzジャイロトロンシステム開発を述べるとともに、それらを利用した電流駆動やXモード入射についても議論する。

論文

Measurement of the electron density produced by the prepulse in an experiment of high energy proton beam generation

Jeong, T.*; Choi, I. W.*; Sung, J. H.*; Kim, H.*; Hong, K.*; Yu, T.*; Kim, J.-H.*; Noh, Y.*; Ko, D.-K.*; Lee, J.*; et al.

Journal of the Korean Physical Society, 50(1), p.34 - 39, 2007/01

高強度レーザーと物質との相互作用により、高エネルギー粒子(イオン,電子)やX線が生成される。ここで発生した高エネルギー粒子等は、さまざまな応用が提案されテーブルトップの量子ビーム源として注目されている。このような高強度レーザーと物質との相互作用の物理過程を調べるうえで、レーザーのプリパルスによって生成されるプリプラズマを評価しておく必要がある。実験は、チタンサファイアレーザーを集光用のポンプ光と計測用のプローブ光に分け、ポンプ光をタンタルターゲットに照射し、発生するプリプラズマをプローブ光の干渉計測によって測定した。干渉縞はバイプリズムを用いてレーザービームの波面を傾けることによって生成した。ポンプ光とプローブ光の時間差を調整することにより、メインパルス前でのプリプラズマの測定を行った。計測されたプリプラズマ条件は、高エネルギープロトン等の発生メカニズムの解析に有効な情報を与える。

28 件中 1件目~20件目を表示