Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Mao, W.; Gong, W.; Harjo, S.; Morooka, Satoshi; Gao, S.*; Kawasaki, Takuro; Tsuji, Nobuhiro*
Journal of Materials Science & Technology, 176, p.69 - 82, 2024/03
Times Cited Count:0 Percentile:0(Materials Science, Multidisciplinary)The yield stress of Fe-24Ni-0.3C (wt.%) metastable austenitic steel increased 3.5 times (158 551 MPa) when the average grain size decreased from 35 m (coarse-grained [CG]) to 0.5 m (ultrafine-grained [UFG]), whereas the tensile elongation was kept large (0.87 0.82). neutron diffraction measurements of the CG and UFG Fe-24Ni-0.3C steels were performed during tensile deformation at room temperature to quantitatively elucidate the influence of grain size on the mechanical properties and deformation mechanisms. The initial stages of plastic deformation in the CG and UFG samples were dominated by dislocation slip, with deformation-induced martensitic transformation (DIMT) also occurring in the later stage of deformation. Results show that grain refinement increases the initiation stress of DIMT largely and suppresses the rate of DIMT concerning the strain, which is attributed to the following effects. (i) Grain refinement increased the stabilization of austenite and considerably delayed the initiation of DIMT in the 111//LD (LD: loading direction) austenite grains, which were the most stable grains for DIMT. As a result, most of the 111//LD austenite grains in the UFG specimens failed to transform into martensite. (ii) Grain refinement also suppressed the autocatalytic effect of the martensitic transformation. Nevertheless, the DIMT with the low transformation rate in the UFG specimen was more efficient in increasing the flow stress and more appropriate to maintain uniform deformation than that in the CG specimen during deformation. The above phenomena mutually contributed to the excellent combination of strength and ductility of the UFG metastable austenitic steel.
Soler, J. M.*; Keklinen, P.*; Pulkkanen, V.-M.*; Moreno, L.*; Iraola, A.*; Trinchero, P.*; Hokr, M.*; ha, J.*; Havlov, V.*; Trpkoov, D.*; et al.
Nuclear Technology, 209(11), p.1765 - 1784, 2023/11
Times Cited Count:2 Percentile:72.91(Nuclear Science & Technology)Mao, W.; Gao, S.*; Gong, W.; Harjo, S.; Kawasaki, Takuro; Tsuji, Nobuhiro*
Scripta Materialia, 235, p.115642_1 - 115642_6, 2023/10
Times Cited Count:1 Percentile:0(Nanoscience & Nanotechnology)In the present study, a hybrid neutron diffraction and digital image correlation measurement was performed on tensile deformation of an ultrafine grain (UFG) stainless steel exhibiting a huge Lders band deformation to evaluate the individual contribution of the austenite matrix and the deformation-induced martensite to the strain hardening during the propagation of the band. Quantitative analysis revealed that the strain hardening of the austenite matrix was insufficient to maintain a uniform deformation when the flow stress was greatly enhanced by the UFG structure. The strain hardening required for the Lders band to propagate was mostly provided by the formation of martensite and the high internal stress within it.
Mao, W.; Gao, S.*; Gong, W.; Bai, Y.*; Harjo, S.; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*
Acta Materialia, 256, p.119139_1 - 119139_16, 2023/09
Times Cited Count:5 Percentile:90.35(Materials Science, Multidisciplinary)Transformation-induced plasticity (TRIP)-assisted steels exhibit an excellent combination of strength and ductility due to enhanced strain hardening rate associated with deformation-induced martensitic transformation (DIMT). Quantitative evaluation on the role of DIMT in strain hardening behavior of TRIP-assisted steels and alloys can provide guidance for designing advanced materials with strength and ductility synergy, which is, however, difficult since the phase composition keeps changing and both stress and plastic strain are dynamically partitioned among constituent phases during deformation. In the present study, tensile deformation with neutron diffraction measurement was performed on an Fe-24Ni-0.3C (wt.%) TRIP-assisted austenitic steel. The analysis method based on stress partitioning and phase fractions measured by neutron diffraction was proposed, by which the tensile flow stress and the strain hardening rate of the specimen were resolved into factors associated with each phase, i.e., the austenite matrix, deformation-induced martensite, and the transformation rate of DIMT after differentiation, and then the role of each factor in the global strain hardening behavior was discussed. In addition, the plastic strain partitioning between austenite and martensite was indirectly estimated using the dislocation density measured by diffraction profile analysis, which constructed the full picture of stress and strain partitioning between austenite and martensite in the material. The results suggested that both the transformation rate and the phase stress borne by the deformation-induced martensite played important roles in the global tensile properties of the material. The proposed decomposition analysis method could be widely applied to investigating mechanical behavior of multi-phase alloys exhibiting the TRIP phenomenon.
Tamii, Atsushi*; Pellegri, L.*; Sderstrm, P.-A.*; Allard, D.*; Goriely, S.*; Inakura, Tsunenori*; Khan, E.*; Kido, Eiji*; Kimura, Masaaki*; Litvinova, E.*; et al.
European Physical Journal A, 59(9), p.208_1 - 208_21, 2023/09
Times Cited Count:1 Percentile:0.02(Physics, Nuclear)no abstracts in English
Gong, W.; Harjo, S.; Tomota, Yo*; Morooka, Satoshi; Kawasaki, Takuro; Shibata, Akinobu*; Tsuji, Nobuhiro*
Acta Materialia, 250, p.118860_1 - 118860_16, 2023/05
Times Cited Count:2 Percentile:74.65(Materials Science, Multidisciplinary)Gong, W.; Kawasaki, Takuro; Zheng, R.*; Mayama, Tsuyoshi*; Sun, B.*; Aizawa, Kazuya; Harjo, S.; Tsuji, Nobuhiro*
Scripta Materialia, 225, p.115161_1 - 115161_5, 2023/03
Times Cited Count:4 Percentile:45.58(Nanoscience & Nanotechnology)Guo, B.*; Mao, W.; Chong, Y.*; Shibata, Akinobu*; Harjo, S.; Gong, W.; Chen, H.*; Jonas, J. J.*; Tsuji, Nobuhiro*
Acta Materialia, 242, p.118427_1 - 118427_11, 2023/01
Times Cited Count:5 Percentile:64.46(Materials Science, Multidisciplinary)Tsuchida, Noriyuki*; Ueji, Rintaro*; Gong, W.; Kawasaki, Takuro; Harjo, S.
Scripta Materialia, 222, p.115002_1 - 115002_6, 2023/01
Times Cited Count:5 Percentile:64.46(Nanoscience & Nanotechnology)Gong, W.; Zheng, R.*; Harjo, S.; Kawasaki, Takuro; Aizawa, Kazuya; Tsuji, Nobuhiro*
Journal of Magnesium and Alloys (Internet), 10(12), p.3418 - 3432, 2022/12
Times Cited Count:17 Percentile:93.62(Metallurgy & Metallurgical Engineering)Zheng, R.*; Gong, W.; Du, J.-P.*; Gao, S.*; Liu, M.*; Li, G.*; Kawasaki, Takuro; Harjo, S.; Ma, C.*; Ogata, Shigenobu*; et al.
Acta Materialia, 238, p.118243_1 - 118243_15, 2022/10
Times Cited Count:17 Percentile:93.62(Materials Science, Multidisciplinary)Liu, B.*; Feng, R.*; Busch, M.*; Wang, S.*; Wu, H.*; Liu, P.*; Gu, J.*; Bahadoran, A.*; Matsumura, Daiju; Tsuji, Takuya; et al.
ACS Nano, 16(9), p.14121 - 14133, 2022/09
Times Cited Count:49 Percentile:98.33(Chemistry, Multidisciplinary)Soler, J. M.*; Meng, S.*; Moreno, L.*; Neretnieks, I.*; Liu, L.*; Keklinen, P.*; Hokr, M.*; ha, J.*; Vetenk, A.*; Reimitz, D.*; et al.
Geologica Acta, 20(7), 32 Pages, 2022/07
Times Cited Count:3 Percentile:57.97(Geology)Task 9B of the SKB Task Force on Modelling of Groundwater Flow and Transport of Solutes in fractured rock focused on the modelling of experimental results from the LTDE-SD in situ tracer test performed at the sp Hard Rock Laboratory in Sweden. Ten different modelling teams provided results for this exercise, using different concepts and codes. Three main types of modelling approaches were used: (1) analytical solutions to the transport-retention equations, (2) continuum-porous-medium numerical models, and (3) microstructure-based models accounting for small-scale heterogeneity (i.e. mineral grains and microfracture distributions). The modelling by the different teams allowed the comparison of many different model concepts, especially in terms of potential zonations of rock properties (porosity, diffusion, sorption), such as the presence of a disturbed zone at the rock and fracture surface, the potential effects of micro- and cm-scale fractures.
Soler, J. M.*; Neretnieks, I.*; Moreno, L.*; Liu, L.*; Meng, S.*; Svensson, U.*; Iraola, A.*; Ebrahimi, K.*; Trinchero, P.*; Molinero, J.*; et al.
Nuclear Technology, 208(6), p.1059 - 1073, 2022/06
Times Cited Count:4 Percentile:45.99(Nuclear Science & Technology)The SKB Task Force is an international forum on modelling of groundwater flow and solute transport in fractured rock. The WPDE experiments are matrix diffusion experiments in gneiss performed at the ONKALO underground facility in Finland. Synthetic groundwater containing several conservative and sorbing tracers was injected along a borehole interval. The objective of Task 9A was the predictive modelling of the tracer breakthrough curves from the WPDE experiments. Several teams, using different modelling approaches and codes, participated in this exercise. An important conclusion from this exercise is that the modelling results were very sensitive to the magnitude of dispersion in the borehole opening, which is related to the flow of water. Focusing on the tails of the breakthrough curves, which are more directly related to matrix diffusion and sorption, the results from the different teams were more comparable.
Liu, M.*; Gong, W.; Zheng, R.*; Li, J.*; Zhang, Z.*; Gao, S.*; Ma, C.*; Tsuji, Nobuhiro*
Acta Materialia, 226, p.117629_1 - 117629_13, 2022/03
Times Cited Count:45 Percentile:99.49(Materials Science, Multidisciplinary)Mao, W.; Gao, S.*; Bai, Y.*; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*
Journal of Materials Research and Technology, 17, p.2690 - 2700, 2022/03
Times Cited Count:9 Percentile:83.6(Materials Science, Multidisciplinary)Metastable austenitic steels having ultrafine grained (UFG) microstructures can be fabricated by conventional cold rolling and annealing processes by utilizing the deformation-induced martensitic transformation during cold rolling and its reverse transformation to austenite upon annealing. However, such processes are not applicable when the austenite has high mechanical stability against deformation-induced martensitic transformation, since there is no sufficient amount of martensite formed during cold rolling. In the present study, a two-step cold rolling and annealing process was applied to an Fe-24Ni-0.3C metastable austenitic steel having high mechanical stability. Prior to the cold rolling, a repetitive subzero treatment and reverse annealing treatment were applied. Such a treatment dramatically decreased the mechanical stability of the austenite and greatly accelerated the formation of deformation-induced martensite during the following cold rolling processes. As a result, the grain refinement was significantly promoted, and a fully recrystallized specimen with a mean austenite grain size of 0.5 mm was successfully fabricated, which exhibited both high strength and high ductility.
Ji, Y.-Y.*; Ochi, Kotaro; Hong, S. B.*; Nakama, Shigeo; Sanada, Yukihisa; Mikami, Satoshi
Health Physics, 121(6), p.613 - 620, 2021/12
Times Cited Count:0 Percentile:0.01(Environmental Sciences)According to the implementing arrangement between JAEA (Japan Atomic Energy Agency) and KAERI (Korea Atomic Energy Research Institute) in the field of the radiation protection and environmental radiation monitoring, the joint measurement has been conducted to assess the radioactive cesium deposition in the ground around the Fukushima Daiichi Nuclear Power Plants (FDNPP). First, mobile gamma-ray spectrometry using backpack survey platform was conducted to assess the distribution of dose rate around specific three survey sites. The carborne survey using gamma-ray spectrometers, as loading inside a vehicle, was successfully conducted to compare measured dose rates in routes from site to site and verify evaluation methods including the attenuation correction.
Wada, Yuki*; Matsumoto, Takahiro*; Enoto, Teruaki*; Nakazawa, Kazuhiro*; Yuasa, Takayuki*; Furuta, Yoshihiro*; Yonetoku, Daisuke*; Sawano, Tatsuya*; Okada, Go*; Nanto, Hidehito*; et al.
Physical Review Research (Internet), 3(4), p.043117_1 - 043117_31, 2021/12
Soler, J. M.*; Keklinen, P.*; Pulkkanen, V.-M.*; Moreno, L.*; Iraola, A.*; Trinchero, P.*; Hokr, M.*; ha, J.*; Havlov, V.*; Trpkoov, D.*; et al.
SKB TR-21-09, 204 Pages, 2021/11
Yao, Y.*; Cai, R.*; Yang, S.-H.*; Xing, W.*; Ma, Y.*; Mori, Michiyasu; Ji, Y.*; Maekawa, Sadamichi; Xie, X.-C.*; Han, W.*
Physical Review B, 104(10), p.104414_1 - 104414_6, 2021/09
Times Cited Count:2 Percentile:7.92(Materials Science, Multidisciplinary)