Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Bae, J. W.*; Jung, J.*; Kim, J. G.*; Park, J. M.*; Harjo, S.; 川崎 卓郎; Woo, W.*; Kim, H. S.*
Materialia, 9, p.100619_1 - 100619_15, 2020/03
In the present study, an integrated experimental-numerical analysis on ferrous medium-entropy alloy (FMEA) was conducted to understand the micromechanical response of the constituent phases in the FMEA at -137C. The initial face-centered cubic (FCC) single phase microstructure of the FMEA was transformed to body-centered cubic (BCC) martensite during tensile deformation at -137C, resulting in improved low-temperature mechanical properties. The microstructure evolution due to deformation-induced phase transformation mechanism and strain partitioning behavior was analyzed using electron backscatter diffraction. The mechanical responses related to the stress partitioning between constituent phases and deformation-induced transformation rate were measured using neutron diffraction in combination with the nanoindentation analysis.
Jung, W.*; Ahn, J. K.*; 長谷川 勝一; Hicks, K.*; Hwang, S.*; 市川 裕大; Kim, S.*; 佐甲 博之; 佐藤 進; 谷田 聖
JPS Conference Proceedings (Internet), 27, p.011007_1 - 011007_6, 2019/11
We have developed HypTPC consists of TPC and the trigger hodoscope for the J-PARC hadron experiments. The TPC Hodoscope has large scintillators of 80 7 1 cm to cover the TPC. Especially, we have developed a readout circuit for multiple MPPCs to detect photons generated over a large area of the scintillator. A general methods of applying voltage to multiple MPPCs are parallel and series connections. In the case of parallel connections, a signal has a long tail due to the large sensor capacitance. MEG collaboration used four MPPC segments as a serial connection. However, in the case of a series connection, the requiring bias voltage is very high, and the gain is low. To avoid this problem, we have developed a new individual biasing method with a summing amplifier for stable multiple MPPC readouts. We also made prototype detectors and performed a cosmic-ray test. Brief descriptions of our prototypes and preliminary results of the cosmic-ray test are presented in this article.
Vostner, A.*; Pong, I.*; Bessette, D.*; Devred, A.*; Sgobba, S.*; Jung, A.*; Weiss, K.-P.*; Jewell, M. C.*; Liu, S.*; Yu, W.*; et al.
IEEE Transactions on Applied Superconductivity, 23(3), p.9500705_1 - 9500705_5, 2013/06
被引用回数:11 パーセンタイル:53.14(Engineering, Electrical & Electronic)ITERの超伝導コイルシステムで使用されるITER用ケーブルインコンジット導体は、ステンレス管(ジャケット)に300本から1440本の素線で構成されるケーブルを収めた構造である。ジャケットは、円形、又は角形のものが用いられ、低炭素型AISI316LNグレードのステンレス鋼又は高マンガンステンレス鋼JK2LBが使用されている。国内機関の試験装置、ITERから指定されたCERN、カールスルーエ工科大学において、ジャケットの母材及び溶接継手の機械試験を室温及び低温(7K以下)で行った。その結果、測定された特性は、各試験装置間でほぼ一致した。本論文では、試験装置のベンチマーク的な観点で、試験結果をまとめ、比較した結果について述べる。
柴田 大受; 角田 淳弥; 牧田 太陽*; 高木 俊*; 國本 英治*; 沢 和弘; Kim, W. J.*; Jung, C. H.*; Park, J. Y.*
日本機械学会論文集,A, 76(764), p.383 - 385, 2010/04
日本原子力研究開発機構では、1000C近い高温のガスを炉外に取り出すことができる超高温ガス炉(VHTR)の研究開発を進めており、高効率発電や水素製造への利用が可能である。VHTRの炉内構造物には、金属に代わる耐熱性に優れた耐熱セラミックス複合材料を開発することが重要であり、炭素繊維強化炭素複合材料(C/C複合材料)は候補材料の一つであるが、炉内構造物への応用のためには、その破壊挙動を明らかにしておく必要がある。本研究では、二次元(2D-)C/C複合材料についてSENB試験片により破壊特性を評価し、以下の結果を得た。(1)3つの銘柄の2D-C/C複合材料について、金属材料の評価式を適用して応力拡大係数を評価することを試み、今回の試験体系で材料ごとの破壊特性を評価することができる見通しを得た。(2)荷重-開口変位量曲線において、き裂の進展だけではなく層間はく離の効果が含まれていることを確認した。今後、定量評価を行う予定である。
柴田 大受; 角田 淳弥; 牧田 太陽*; 高木 俊*; 國本 英治; 沢 和弘; Park, Y.*; Kim, W. J.*; Jung, C. H.*
no journal, ,
日本原子力研究開発機構では、1000C近い高温のガスを炉外に取り出すことができる超高温ガス炉(VHTR)の研究開発を進めており、高効率発電や水素製造への利用が可能である。VHTRの炉内構造物には、金属に代わる耐熱性に優れた耐熱セラミックス複合材料を開発することが重要であり、炭素繊維強化炭素複合材料(C/C複合材料)は候補材料の一つであるが、炉内構造物への応用のためには、その破壊挙動を明らかにしておく必要がある。本研究では、二次元(2D-)C/C複合材料についてSENB試験片により破壊特性を評価し、以下の結果を得た。(1)金属材料の評価式から求めた3つの銘柄の2D-C/C複合材料の応力拡大係数は8から15MPa mであり、今回の試験体系で材料ごとの破壊特性を評価できる見通しを得た。(2)荷重-開口変位量曲線において、き裂の進展だけではなく層間はく離の効果が含まれていることを確認した。今後、定量評価を行う予定である。