Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Toyoda, Satoshi*; Yamamoto, Tomoki*; Yoshimura, Masashi*; Sumida, Hirosuke*; Mineoi, Susumu*; Machida, Masatake*; Yoshigoe, Akitaka; Suzuki, Satoru*; Yokoyama, Kazushi*; Ohashi, Yuji*; et al.
Vacuum and Surface Science, 64(2), p.86 - 91, 2021/02
We have developed measurement and analysis techniques in X-ray photoelectron spectroscopy. To begin with, time-division depth profiles of gate stacked film interfaces have been achieved by NAP-HARPES (Near Ambient Pressure Hard X-ray Angle-Resolved Photo Emission Spectroscopy) data. We then have promoted our methods to quickly perform peak fittings and depth profiling from time-division ARPES data, which enables us to realize 4D-XPS analysis. It is found that the traditional maximum entropy method (MEM) combined with Jackknife averaging of sparse modeling in NAP-HARPES data is effective to perform dynamic measurement of depth profiles with high precision.
Higashijima, Satoru; Kamada, Yutaka; Barabaschi, P.*; Shirai, Hiroshi; JT-60SA Team
Fusion Science and Technology, 68(2), p.259 - 266, 2015/09
Times Cited Count:0 Percentile:0.01(Nuclear Science & Technology)Shibata, Keiichi; Iwamoto, Osamu; Nakagawa, Tsuneo*; Iwamoto, Nobuyuki; Ichihara, Akira; Kunieda, Satoshi; Chiba, Satoshi; Furutaka, Kazuyoshi; Otsuka, Naohiko*; Osawa, Takaaki*; et al.
Journal of Nuclear Science and Technology, 48(1), p.1 - 30, 2011/01
Times Cited Count:1611 Percentile:100(Nuclear Science & Technology)The fourth version of Japanese Evaluated Nuclear Data Library has been produced. In the new library, much emphasis is placed on the improvements of fission product and minor actinoid data. Two nuclear model codes were developed to evaluate the cross sections of fission products and minor actinoids. Coupled-channel optical model parameters, which can be applied to wide mass and energy regions, were obtained for nuclear model calculations. Thermal cross sections of actinoids were determined by considering recent experimental data or by the systematics of neighboring nuclei. A simultaneous evaluation was performed for the fission cross sections of important uranium and plutonium isotopes above 10 keV. The data on FP were re-evaluated, and new evaluations were performed for 30 nuclides. The data on light elements and structural materials were partly re-evaluated. The new library was released as JENDL-4.0 in May 2010.
Shibata, Yoshihide*; Watanabe, Kiyomasa*; Okamoto, Masaaki*; Ono, Noriyasu*; Isayama, Akihiko; Kurihara, Kenichi; Nakano, Tomohide; Oyama, Naoyuki; Kawano, Yasunori; Matsunaga, Go; et al.
Nuclear Fusion, 50(2), p.025015_1 - 025015_7, 2010/01
Times Cited Count:17 Percentile:52.35(Physics, Fluids & Plasmas)no abstracts in English
Oshima, Takeshi; Onoda, Shinobu; Kamada, Toru*; Hotta, Kazutoshi*; Kawata, Kenji*; Eryu, Osamu*
Materials Science Forum, 615-617, p.781 - 784, 2009/00
Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) were fabricated on p-type epitaxial 4H-SiC substrates with different surface conditions. These electrical characteristics were compared from a point of view of the surface condition. The MOSFETs on Chemical Mechanical Polished substrates showed the drain current of the order of 10 A at a gate voltage of zero. The drain current increased with increasing the surface roughness of substrates. With decreasing the surface roughness of substrates, the values of the threshold voltage decreased and the quality of gate oxide became better.
Matsukawa, Makoto; Kikuchi, Mitsuru; Fujii, Tsuneyuki; Fujita, Takaaki; Hayashi, Takao; Higashijima, Satoru; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Ide, Shunsuke; Ishida, Shinichi; et al.
Fusion Engineering and Design, 83(7-9), p.795 - 803, 2008/12
Times Cited Count:17 Percentile:72.86(Nuclear Science & Technology)no abstracts in English
Ushigusa, Kenkichi; Seki, Masahiro; Ninomiya, Hiromasa; Norimatsu, Takayoshi*; Kamada, Yutaka; Mori, Masahiro; Okuno, Kiyoshi; Shibanuma, Kiyoshi; Inoue, Takashi; Sakamoto, Keishi; et al.
Genshiryoku Handobukku, p.906 - 1029, 2007/11
no abstracts in English
Asakura, Nobuyuki; Kawashima, Hisato; Shimizu, Katsuhiro; Sakurai, Shinji; Fujita, Takaaki; Takenaga, Hidenobu; Nakano, Tomohide; Kubo, Hirotaka; Higashijima, Satoru; Hayashi, Takao; et al.
Europhysics Conference Abstracts (CD-ROM), 31F, 4 Pages, 2007/00
Divertor design for the JT-60 SA has been progressing in order to handle large heat flux during full pulse duration of 100 s. Divertor should be suitable for single null plasma experiments with the full power injection of 41 MW. The simulation results using 2D fluid (plasma) and Monte-Carlo (neutral) code are summarized. Lower single-null divertor is designed for ITER-like plasma configuration in order to study physics concept of the ITER divertor: control of the plasma detachment. Simulation results for various divertor geometries showed that the vertical target with V-shaped corner can produce plasma detachment near the outer strike-point for medium edge plasma density. It was also demonstrated that the divertor plasma became attached to move the outer strike point above the V-corner, suggesting that recover from sever detachment can be achieved by changing the plasma location. USN divertor will be designed for high- plasma experiments with the highest shaping plasma of S=6.
Ninomiya, Hiromasa; Akiba, Masato; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hayashi, Nobuhiko; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Inoue, Nobuyuki; et al.
Journal of the Korean Physical Society, 49, p.S428 - S432, 2006/12
To contribute DEMO and ITER, the design to modify the present JT-60U into superconducting coil machine, named National Centralized Tokamak (NCT), is being progressed under nationwide collaborations in Japan. Mission, design and strategy of this NCT program is summarized.
Takahashi, Seiki*; Kikuchi, Hiroaki*; Ara, Katsuyuki*; Ebine, Noriya; Kamada, Yasuhiro*; Kobayashi, Satoru*; Suzuki, Masahide
Journal of Applied Physics, 100(2), p.023902_1 - 023902_6, 2006/07
Times Cited Count:36 Percentile:75.26(Physics, Applied)Magnetic minor hysteresis loops of low carbon steel and Fe metal have been measured during neutron radiation at 563 K in a nuclear reactor. For investigation of nucleation mechanism of copper precipitates and dislocation loops, special attention was paid to minor-loop coefficients, which are deduced from simple relations between minor-loop parameters and are very sensitive to lattice defects. We found that with increasing neutron fluence, the minor-loop coefficients of low carbon steel sharply increase and show a maximum at the fluence of 110 cm, followed by a slow decrease. The appearance of the maximum suggests the presence of two mechanisms of internal stress; while copper precipitates and dislocation loops in the matrix make the internal stress increase, those grown in the vicinity of dislocations compensate the internal stress of dislocations. On the other hand, the minor-loop coefficients show a monotonic increase with neutron fluence in Fe metal.
Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.
Nuclear Fusion, 46(3), p.S29 - S38, 2006/03
Times Cited Count:13 Percentile:41.76(Physics, Fluids & Plasmas)The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.
Tsuchiya, Katsuhiko; Akiba, Masato; Azechi, Hiroshi*; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; et al.
Fusion Engineering and Design, 81(8-14), p.1599 - 1605, 2006/02
Times Cited Count:1 Percentile:9.98(Nuclear Science & Technology)no abstracts in English
Takenaga, Hidenobu; Asakura, Nobuyuki; Kubo, Hirotaka; Higashijima, Satoru; Konoshima, Shigeru; Nakano, Tomohide; Oyama, Naoyuki; Porter, G. D.*; Rognlien, T. D.*; Rensink, M. E.*; et al.
Nuclear Fusion, 45(12), p.1618 - 1627, 2005/12
Times Cited Count:18 Percentile:51.39(Physics, Fluids & Plasmas)no abstracts in English
Tamai, Hiroshi; Akiba, Masato; Azechi, Hiroshi*; Fujita, Takaaki; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; Hosogane, Nobuyuki; Ichimura, Makoto*; et al.
Nuclear Fusion, 45(12), p.1676 - 1683, 2005/12
Times Cited Count:15 Percentile:45.53(Physics, Fluids & Plasmas)Design studies are shown on the National Centralized Tokamak facility. The machine design is carried out to investigate the capability for the flexibility in aspect ratio and shape controllability for the demonstration of the high-beta steady state operation with nation-wide collaboration, in parallel with ITER towards DEMO. Two designs are proposed and assessed with respect to the physics requirements such as confinement, stability, current drive, divertor, and energetic particle confinement. The operation range in the aspect ratio and the plasma shape is widely enhanced in consistent with the sufficient divertor pumping. Evaluations of the plasma performance towards the determination of machine design are presented.
Takenaga, Hidenobu; Asakura, Nobuyuki; Kubo, Hirotaka; Higashijima, Satoru; Konoshima, Shigeru; Nakano, Tomohide; Oyama, Naoyuki; Porter, G. D.*; Rognlien, T. D.*; Rensink, M. E.*; et al.
Proceedings of 20th IAEA Fusion Energy Conference (FEC 2004) (CD-ROM), 8 Pages, 2004/11
no abstracts in English
Tamai, Hiroshi; Matsukawa, Makoto; Kurita, Genichi; Hayashi, Nobuhiko; Urata, Kazuhiro*; Miura, Yushi; Kizu, Kaname; Tsuchiya, Katsuhiko; Morioka, Atsuhiko; Kudo, Yusuke; et al.
Plasma Science and Technology, 6(1), p.2141 - 2150, 2004/02
Times Cited Count:2 Percentile:6.49(Physics, Fluids & Plasmas)The dominant issue for the the modification program of JT-60 (JT-60SC) is to demonstrate the steady state reactor relevant plasma operation. Physics design on plasma parameters, operation scenarios, and the plasma control method are investigated for the achievement of high-. Engineering design and the R&D on the superconducting magnet coils, radiation shield, and vacuum vessel are performed. Recent progress in such physics and technology developments is presented.
Oyama, Naoyuki; Miura, Yukitoshi; Chankin, A. V.; Takenaga, Hidenobu; Asakura, Nobuyuki; Kamada, Yutaka; Oikawa, Toshihiro; Shinohara, Koji; Takeji, Satoru
Nuclear Fusion, 43(10), p.1250 - 1257, 2003/10
Times Cited Count:16 Percentile:46.47(Physics, Fluids & Plasmas)no abstracts in English
Takenaga, Hidenobu; Higashijima, Satoru; Oyama, Naoyuki; Bruskin, L. G.; Koide, Yoshihiko; Ide, Shunsuke; Shirai, Hiroshi; Sakamoto, Yoshiteru; Suzuki, Takahiro; Hill, K. W.*; et al.
Nuclear Fusion, 43(10), p.1235 - 1245, 2003/10
Times Cited Count:71 Percentile:88.64(Physics, Fluids & Plasmas)no abstracts in English
Isayama, Akihiko; Kamada, Yutaka; Hayashi, Nobuhiko; Suzuki, Takahiro; Oikawa, Toshihiro; Fujita, Takaaki; Fukuda, Takeshi; Ide, Shunsuke; Takenaga, Hidenobu; Ushigusa, Kenkichi; et al.
Nuclear Fusion, 43(10), p.1272 - 1278, 2003/10
Times Cited Count:130 Percentile:95.67(Physics, Fluids & Plasmas)no abstracts in English
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Chujo, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
no abstracts in English